Stepwise Oxidation of Thiophene and Its Derivatives by Hydrogen Peroxide Catalyzed by Methyltrioxorhenium(VII)

Radiation-Driven Destruction of Thiophene and Methyl-Substituted Thiophenes

Thiophene and two derivatives (2-methylthiophene and 3-methylthiophene) have been detected on the surface of Mars with the Sample Analysis at Mars instrument suite onboard NASA's Curiosity rover. Thiophene could serve as a secondary chemical biosignature since the secondary biosynthesis of thiophene is considered an important production pathway. However, it is critical to understand the abiotic formation and destruction of thiophene and its derivatives since these pathways could affect the molecules' stabilities on planetary surfaces over geological timescales. Here, we present the radiolytic destruction kinetics of thiophene, 2-methylthiophene, and 3-methylthiophene as single-component ices and when diluted in water ice at low temperatures. Using infrared spectroscopy, we determined the destruction rate constants and extrapolated our radiolytic half-lives to the surface of Mars, assuming the measured and modeled surface dose rates. We found that our rate constants strongly depend on temperature and presence of water ice. Based on our determined radiolytic half-life for thiophene under conditions most similar to those of thiophene groups in Martian macromolecules, we expect thiophene to be stable on the surface for significantly longer than the Martian surface exposure age of sites in Gale crater where thiophenes have been detected.

Synthesis of diphenyl-(2-thienyl)phosphine, its chalcogenide derivatives and a series of novel complexes of lanthanide nitrates and triflates

A novel synthesis of diphenyl(2-thienyl)phosphine, along with its' oxide, sulfide and selenide derivatives, is reported here. These phosphines have been characterized by NMR, IR, MS and X-Ray crystallography. The phosphine oxide derivative was reacted with a selection of lanthanide(III) nitrates and triflates, LnX₃, to give the resultant metal-ligand complexes. These complexes have also been characterized by NMR, IR, MS and X-Ray crystallography. Single crystal X-Ray diffraction data shows a difference in metal-ligand complex stoichiometry and stereochemistry depending on the counteranion (nitrate vs. triflate). The [Ln(Ar₃PO)₃(NO₃)₃] ligand-nitrate complexes are nine-coordinate to the metal in the solid state (bidentate nitrate), featuring a 1 : 3 lanthanide-ligand ratio and bear an overall octahedral arrangement of the six, coordinated ligands. Our [Ln(Ar₃PO)₃(NO₃)₃] ligand-nitrate complexes gave three examples of fac-stereochemistry, where mer-stereochemistry is almost universally observed in the literature of highly related [Ln(Ar₃PO)₃(NO₃)₃] complexes. For the Tb complexes, two different arrangements of the ligands around the metal were observed in the solid state for [Tb(Ar₃PO)₃(NO₃)₃] and [Tb(Ar₃PO)₄(OTf)₂] [OTf]. [Tb(Ar₃PO)₃(NO₃)₃] is strictly nine-coordinate, ligand mer-stereochemistry in the solid state, and [Tb(Ar₃PO)₄(OTf)₂] [OTf] is strictly octahedral, six-coordinate, with a square-planar stereochemical arrangement of the phosphine oxide ligands around the metal.

Methyltrioxorhenium (MTO) catalysis in the epoxidation of alkenes: a synthetic overview

Epoxides are biologically important moiety that is also used as synthetic intermediates. This review aims to present the up-to-date advancements in methyltrioxorhenium (MTO)-catalyzed epoxidation of alkenes using diverse oxidizing agents.

Mild Oxidation of Organosulfur Compounds with H2O2 over Metal-Containing Microporous and Mesoporous Catalysts

Mild catalytic oxidation of thioethers and thiophenes is an important reaction for the synthesis of molecules with pharmaceutical interest, as well as for the development of efficient processes able to remove sulfur-containing pollutants from fuels and wastewater. With respect to the green chemistry principles, hydrogen peroxide (H2O2) is the ideal oxidant and the Me-containing porous materials (Me = Ti, V, Mo, W, Zr) are among the best heterogeneous catalysts for these applications. The main classes of catalysts, including Me-microporous and mesoporous silicates, Me-layered double hydroxides, Me-metal–organic frameworks, are described in this review. The catalytic active species generated in the presence of H2O2, as well as the probable oxidation mechanisms, are also addressed. The reactivity of molecules in the sulfoxidation process and the role played by the solvents are explored.

Assessment of the Oxidative Desulfurization of Middle Distillate Surrogate Fuels with Spectroscopic Techniques

The oxidative desulfurization of five (5) model sulfur compounds and eleven (11) surrogate blends was investigated using the hydrogen peroxide (H₂O₂)-acetic acid (CH₃COOH) system. Consequently, extractive desulfurization was carried out using conventional solvents. The model sulfur compounds, as well as the solvent, are present in petroleum middle distillates. The selection of the compounds was made so that they represent various kinds of sulfur compounds. The goal of this study was the implementation of a simple and economical oxidative and extractive system for the desulfurization of surrogate mixtures with an intermediate sulfur concentration 1% w/w, at the mild temperature of 70°C, and without the use of supplementary and assisting methods such as heterogeneous catalysis or ultrasound irradiation. The sulfur content was estimated using X-ray fluorescence. The progress of the oxidation reaction was monitored using liquid FT-IR. The solid sediments of the oxidation procedure were identified with solid-state FT-IR and ¹H NMR spectroscopy.

SILCs in oxidative desulfurization: effect of support and heteropolyanion

Catalysts for oxidative desulfurization based on imidazolium ionic liquid and H₃PMo₁₂O₄₀ or H₃PW₁₂O₄₀, grafted to mesoporous silicas.

A biocatalytic method for the chemoselective aerobic oxidation of aldehydes to carboxylic acids

Herein, we present a study on the oxidation of aldehydes to carboxylic acids using three recombinant aldehyde dehydrogenases (ALDHs). The ALDHs were used in purified form with a nicotinamide oxidase (NOx), which recycles the catalytic NAD+ at the expense of dioxygen (air at atmospheric pressure). The reaction was studied also with lyophilised whole cell as well as resting cell biocatalysts for more convenient practical application. The optimised biocatalytic oxidation runs in phosphate buffer at pH 8.5 and at 40 °C. From a set of sixty-one aliphatic, aryl-aliphatic, benzylic, hetero-aromatic and bicyclic aldehydes, fifty were converted with elevated yield (up to >99%). The exceptions were a few ortho-substituted benzaldehydes, bicyclic heteroaromatic aldehydes and 2-phenylpropanal. In all cases, the expected carboxylic acid was shown to be the only product (>99% chemoselectivity). Other oxidisable functionalities within the same molecule (e.g. hydroxyl, alkene, and heteroaromatic nitrogen or sulphur atoms) remained untouched. The reaction was scaled for the oxidation of 5-(hydroxymethyl)furfural (2 g), a bio-based starting material, to afford 5-(hydroxymethyl)furoic acid in 61% isolated yield. The new biocatalytic method avoids the use of toxic or unsafe oxidants, strong acids or bases, or undesired solvents. It shows applicability across a wide range of substrates, and retains perfect chemoselectivity. Alternative oxidisable groups were not converted, and other classical side-reactions (e.g. halogenation of unsaturated functionalities, Dakin-type oxidation) did not occur. In comparison to other established enzymatic methods such as the use of oxidases (where the concomitant oxidation of alcohols and aldehydes is common), ALDHs offer greatly improved selectivity.

Tris(S,S-dioxide)-trithiasumanene: strong fluorescence and cocrystal with 1,2,6,7,10,11-hexabutoxytriphenylene

Trithiasumanene was regioselectively transformed into tris(S,S-dioxide)-trithiasumanene, which displays strong fluorescence and forms a chiral cocrystal with HBT, showing a yellow emission.

Magnetic amphiphilic nanocomposites based on silica–carbon for sulphur contaminant oxidation

Magnetic amphiphilic nanocomposites based on silica–carbon promote the desulfurization of diesel fuel and their activity is enhanced by Mo nuclei supported on the surface.

Oxidation-induced photoluminescence of conjugated polymers

Here, we report an unusual oxidation-induced photoluminescence (PL) turn-on response of a poly(3-alkoxythiophene), poly(3-{2-[2-(2-ethoxyethoxy)ethoxy]ethoxy}thiophene) (PEEEET). PEEEET shows a significantly red-shifted absorption spectrum compared to polyalkylthiophenes and is almost nonfluorescent (quantum yield ≪ 1%) in its pristine state. The introduction of sulfonyl defects along the polymer backbone by the oxidation of PEEEET with meta-chloroperbenzoic acid (m-CPBA) increased the emission quantum yield with the intensity increasing with the degree of oxidation. Molecular modeling data indicated that the oxidation-induced PL increase cannot be explained by the nature of monomer units and radiative rate changes. We attributed the enhanced fluorescence to the reduced nonradiative rate caused by the increased band gap, according to the energy gap law, which is consistent with the observed blue shifts in absorption and PL spectra accompanied by the PL increase.

Synthesis and crystal structure of novel sulfone derivatives containing 1,2,4-triazole moieties

Some 3-(Substituted methylthio)-4-phenyl-5-(3,4,5-trimethoxyphenyl)-4H-1,2,4-triazole derivatives were synthesized in six steps starting from easily accessible gallic acid. The resulting sulfides were then catalytically oxidized to the title sulfones with H₂O₂. The products were obtained in high yield under mild conditions and practically devoid of any by-products. The structures were confirmed by elemental analysis, IR, ¹H- and ¹³C-NMR spectral data. Furthermore, a detailed X-ray crystallography structural analysis of model triazole 7g was carried out.

Selective Catalytic Oxidation of Organosulfur Compounds withtert-Butyl Hydroperoxide

Rates and selectivities for the oxidation of various organosulfur compounds with tert-butyl hydroperoxide were measured on CoAPO-5 (APO = aluminophosphate; Co/P = 0.05), Co/H-Y (Co/Al = 0.15), and MoO(x)/Al2O3 (15 % wt MoO3). Rates increased with increasing electron density at the sulfur atom (methyl phenyl sulfide>diphenyl sulfide>4-methyldibenzothiophene>2,5-dimethyl thiophene). Rates (per metal atom) were significantly higher on CoAPO-5 than on Co/H-Y, MoO(x)/Al2O3, or homogeneous Co acetate catalysts. Small amounts of sulfoxides (1-oxide) were detected on all catalysts at low reactant conversions, together with their corresponding sulfones; at higher conversions, only sulfones (1,1-dioxide) were detected, indicating that the oxidation of sulfoxides is much faster than for organosulfur reactants in the sequential oxidation pathways prevalent on these catalysts. Framework Co cations were not leached from CoAPO-5 during the oxidation of 4-methyldibenzothiophene, but most exchanged Co cations in H-Y and >20 % of Mo cations in MoO(x)/Al2O3 were extracted during these reactions. The fraction of redox-active Co cations in CoAPO-5 and Co/H-Y was measured by reduction-oxidation cycles using H2 and O2 and by UV-visible spectroscopy. This fraction was much larger in CoAPO-5 (0.35) than in Co/H-Y (0.01), consistent with the higher oxidation rates measured on CoAPO-5 and with the involvement of redox-active species in kinetically-relevant steps in catalytic oxidation sequences. Redox-active Co cations at framework positions within accessible channels are required for catalytic activity and structural stability during oxidative desulfurization, whether hydroperoxides are used as reactants or as intermediates (when O2 is used as the oxidant).

Preparation and structural characterization of polymer-supported methylrhenium trioxide systems as efficient and selective catalysts for the epoxidation of olefins

Novel heterogeneous compounds of methylrhenium trioxide (MTO) were prepared with poly(4-vinylpyridine) and polystyrene as polymeric supports. The wide-angle X-ray diffraction (WAXS.) analysis, performed by the application of the difference method, showed, in a representative case of the poly(4-vinylpyridine)/MTO derivatives, a slightly distorted octahedral conformation on the metal's primary coordination sphere. The Re-O and Re-C bond distances were not influenced by the polymeric nature of the ligand, while the Re-N bond distance was abnormally shorter than those previously observed for homogeneous MTO/L(n) complexes, showing a strong coordination of the rhenium atom to the support. A set of scanning electron microscopy (SEM) photographs showing the morphology of the surface of particles of poly(4-vinylpyridine)/MTO and polystyrene/MTO systems are reported. The reticulation grade of the polymer was a crucial factor for the morphology of the particles surface. Poly(4-vinylpyridine) 2% cross-linked systems were characterized by particles with very irregular shape and surface. Poly(4-vinylpyridine) 25% cross-linked systems showed particles with regular spherical shape, which morphology was similar to microcapsules obtained with polystyrene. All novel MTO compounds were efficient and selective heterogeneous catalysts for the epoxidation of olefins using environmentally friendly H2O2 as oxygen atom donor. The catalyst activity was maintained for at least five recycling experiments.