Simultaneously Depositing Pd−Ag Thin Membrane on Asymmetric Porous Stainless Steel Tube and Application To Produce Hydrogen from Steam Reforming of Methane

Olive Mill Wastewater Valorization through Steam Reforming Using Multifunctional Reactors: Challenges of the Process Intensification

Olive oil mill wastewater (OMW) is a polluting stream derived from the production of olive oil and is a source of environmental pollution; this is relevant in many countries around the world, but particularly in all the Mediterranean region where major producers are located. In this effluent, several pollutants are present—namely, sugars, fatty acids, and polyphenols, among others. Nowadays, to reduce the pollutant load, several treatment techniques are applied, but these technologies have numerous cost and efficiency problems. For this reason, the steam reforming of the OMW (OMWSR) presents as a good alternative, because this process decreases the pollutant load of the OMW and simultaneously valorizes the waste with the production of green H2, which is consistent with the perspective of the circular economy. Currently, the OMWSR is an innovative treatment alternative in the scientific field and with high potential. In the last few years, some groups have studied the OMWSR and used innovative reactor configurations, aiming to improve the process’ effectiveness. In this review, the OMW treatment/valorization processes, the last developments on catalysis for OMWSR (or steam reforming of similar species present in the effluent), as well as the last advances on OMWSR performed in multi-functional reactors are addressed.

Reformer and membrane modules for methane conversion: experimental assessment and perspectives of an innovative architecture

An innovative concept for steam methane reforming (SMR), based on reformer and membrane modules (RMMs), has been developed and tested to investigate its performance, in terms of feed conversion, on an industrial scale. A major benefit of the proposed RMM configuration is a shift of the chemical equilibrium of SMR reactions, achieved by removing the hydrogen produced at high temperature through the integration of highly selective palladium-based membranes, which enhances the yield of product. In this manner the process can operate at temperatures as low as 600-650 °C, compared to the 850-880 °C range used in conventional plants, and allows for the use of a low-temperature heat source. This Full Paper discusses experimental data on feed conversion at different operating parameters, gathered during 1000 h of testing, and processes these data to optimize the overall architecture, defining the maximum achievable feed conversion. An overall conversion of 59% is achieved with two-step reactions at a reforming temperature of 620 °C. A conversion as high as 90% can be obtained with a three-step architecture at 650 °C by properly extending the design parameters within reasonable limits.