Eco-friendly, Selective Hydroxylation of C-7 Aromatic Compounds Catalyzed by TS-1/H2O2 System under Solvent-free Solid−Liquid−Liquid-Type Triphase Conditions

Post-synthesis of MSE-type titanosilicates by interzeolite transformation for selective anisole hydroxylation

MSE-type titanosilicate was efficiently post-synthesized by the combination of interzeolite transformation by siliceous Beta, dealumination and isomorphous substitution of Ti, and it exhibited high catalytic activity in anisole hydroxylation.

Manganese-cerium composite oxide pyrolyzed from metal organic framework supporting palladium nanoparticles for efficient toluene oxidation

Manganese-cerium metal oxide with flocculent structure prepared via the pyrolysis of Mn/Ce-MOF and supported Pd were applied for the catalytic oxidation of toluene. The Pd/Mn3Ce2-300 catalyst could completely oxidize toluene at 190 °C, which presented excellent catalytic performance. Moreover, Pd/Mn3Ce2-300 possessed great reusability, stability and water resistance even under 10 vol% water vapors. A series of characterizations including X-ray diffraction (XRD), N₂ adsorption-desorption, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and H₂ temperature programmed reduction (H₂-TPR) were used to investigate the physicochemical properties of the samples. It was found that Pd/Mn3Ce2-300 possessed a better reduction ability at low temperature, more surface absorbed oxygen and surface Pd species, and a strong interaction between Pd and Mn3Ce2-300, resulting in great catalytic performance for toluene degradation.

Photocatalytic Performance and Degradation Pathway of Rhodamine B with TS-1/C3N4 Composite under Visible Light

TS-1/C3N4 composites were prepared by calcining the precursors with cooling crystallization method and were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), UV-Vis diffuse reflection spectrum (DRS) and nitrogen adsorption-desorption isotherm. The photocatalytic performance of TS-1/C3N4 composites was investigated to degrade Rhodamine B (RhB) under visible light irradiation. The results showed that all composites exhibited better photocatalytic performance than pristine TS-1 and C3N4; TS-1/C3N4-B composite (the measured mass ratio of TS-1 to C3N4 is 1:4) had best performance, with a rate constant of 0.04166 min-1, which is about two and ten times higher than those of C3N4 and TS-1, respectively. We attributed the enhanced photocatalytic performance of TC-B to the optimized heterostructure formed by TS-1 and C3N4 with proper proportion. From the results of photoluminescence spectra (PL) and the enhanced photocurrent, it is concluded that photogenerated electrons and holes were separated more effectively in TS-1/C3N4 composites. The contribution of the three main active species for photocatalytic degradation followed a decreasing order of ·O2-, ·OH and h+. The degradation products of RhB were identified by liquid chromatography tandem mass spectrometry (LC-MS/MS), and the possible photocatalytic degradation pathways were proposed.

Fabrication of Microspheres by Nano-TS-1 Crystals via a Spray-Forming Process: From Screening to Scale-up

The spray-forming process of the nano-titanium silicalite (TS-1) zeolite was investigated and optimized in the lab in order to obtain materials with microsphere morphology and superior catalytic activity in cyclohexanone ammoximation on the industrial scale. The effects of spray-forming parameters, such as the state of the TS-1 raw material, load ratio, solid content, binder content, and calcination temperature, on the physicochemical and catalytic properties of TS-1 microspheres were investigated in detail. It was interesting to find that the shape of the spray-forming sample formed by wet powders was more intact than the sample formed by dried powders. Furthermore, the spray-forming process was successfully scaled up to a large spray device (LGZ-1000) according to the similarity principle of load ratio, and the shape of the TS-1 microspheres was as perfect as the spray-forming samples in the lab. The similarity principle of the load ratio for the spray-forming of titanium silicate was established and verified for the first time. The spray-forming TS-1 microspheres produced in the industry were used in cyclohexanone ammoximation, and ketone conversion and oxime selectivity were as high as 99.9 and 99.4%, respectively.

[PhSiO1.5]8,10,12 as nanoreactors for non-enzymatic introduction of ortho, meta or para-hydroxyl groups to aromatic molecules

Traditional electrophilic bromination follows long established "rules": electron-withdrawing substituents cause bromination selective for meta positions, whereas electron-donating substituents favor ortho and para bromination. In contrast, in the [PhSiO_1.5]_8,10,12 silsesquioxanes, the cages act as bulky, electron withdrawing groups equivalent to CF₃; yet bromination under mild conditions, without a catalyst, greatly favors ortho substitution. Surprisingly, ICl iodination without a catalyst favors (>90%) para substitution [p-IC₆H₄SiO_1.5]_8,10,12. Finally, nitration and Friedel-Crafts acylation and sulfonylation are highly meta selective, >80%. In principle, the two halogenation formats coupled with the traditional electrophilic reactions provide selective functionalization at each position on the aromatic ring. Furthermore, halogenation serves as a starting point for the synthesis of two structural isomers of practical utility, i.e. in drug prospecting. The o-bromo and p-iodo compounds are easily modified by catalytic cross-coupling to append diverse functional groups. Thereafter, F^-/H₂O₂ treatment cleaves the Si-C bonds replacing Si with OH. This represents a rare opportunity to introduce hydroxyl groups to aromatic rings, a process not easily accomplished using traditional organic synthesis methods. The as-produced phenol provides additional opportunities for modification. Each cage can be considered a nanoreactor generating 8-12 product molecules. Examples given include syntheses of 4,2'-R,OH-stilbenes and 4,4'-R,OH-stilbenes (R = Me, CN). Unoptimized cleavage of the Br/I derivatives yields 55-85% phenol. Unoptimized cleavage of the stilbene derivatives yields 35-40% (3-5 equivalents of phenol) in the preliminary studies presented here. In contrast, meta R-phenol yields are 80% (7-10 mol per cage).

One step C–N bond formation from alkylbenzene and ammonia over Cu-modified TS-1 zeolite catalyst

The formation of C–N bonds from toluene and ammonia, both on the ring and the side chain, was realized on a Cu-modified TS-1 catalyst, and the ring products had an ortho-orientation advantage.