Steam Reforming of Ethanol over Ni/Al2O3−La2O3 Catalysts Synthesized by Sol−Gel

Catalytic Steam Reforming of Biomass-Derived Oxygenates for H2 Production: A Review on Ni-Based Catalysts

The steam reforming of ethanol, methanol, and other oxygenates (e.g., bio-oil and olive mill wastewater) using Ni-based catalysts have been studied by the scientific community in the last few years. This process is already well studied over the last years, being the critical point, at this moment, the choice of a suitable catalyst. The utilization of these oxygenates for the production of “green” H2 is an interesting alternative to fuel fossils. For this application, Ni-based catalysts have been extensively studied since they are highly active and cheaper than noble metal-based materials. In this review, a comparison of several Ni-based catalysts reported in the literature for the different above-mentioned reactions is carried out. This study aims to understand if such catalysts demonstrate enough catalytic activity/stability for application in steam reforming of the oxygenated compounds and which preparation methods are most adequate to obtain these materials. In summary, it aims to provide insights into the performances reached and point out the best way to get better and improved catalysts for such applications (which depends on the feedstock used).

Investigation of Ni/SiO2 Fiber Catalysts Prepared by Different Methods on Hydrogen production from Ethanol Steam Reforming

Ni/SiO2 (Ni/SF) catalysts were prepared by electrospinning of the SF followed by impregnation. The performance of the Ni/SF catalysts for hydrogen production from ethanol steam reforming at various conditions was investigated in comparison with a conventional Ni/silica porous (Ni/SP) catalyst. The influence of the Ni/SF catalyst preparation methods on the catalytic activity and stability in ethanol steam reforming was also studied. The catalysts were prepared by three different preparation techniques: impregnation (IM), deposition precipitation (DP) and strong electrostatic adsorption (SEA). The Ni/SF catalyst exhibited higher performances and stability than the Ni/SP catalyst. The H2 yields of 55% and 47% were achieved at 600 °C using the Ni/SF and Ni/SP catalysts, respectively. The preparation methods had a significant effect on the catalytic activity and stability of the Ni/SF catalyst, where that prepared by the SEA method had a smaller Ni particle size and higher dispersion, and also exhibited the highest catalytic activity and stability compared to the Ni/SF catalysts prepared by IM and DP methods. The maximum H2 yield produced from the catalyst prepared by SEA was 65%, while that from the catalysts prepared by DP and IM were 60% and 55%, respectively, under the same conditions. The activity of the fiber catalysts prepared by SEA, DP and IM remained almost constant at all times during a 16 h stability test.

One-Pot Synthesis of Mesoporous Ni-Ti-Al Ternary Oxides: Highly Active and Selective Catalysts for Steam Reforming of Ethanol

One-pot synthesis of nanostructured ternary oxides of Ni, Al, and Ti was designed and performed via evaporation induced self-assembly (EISA). For the purpose of comparison, analogous oxides were also prepared by the impregnation method. The resulting materials were applied in two catalytic reactions: steam reforming of ethanol (SRE) for H₂ production (subjected to prior activation with H₂) and ethanol dehydration (ED; used without prior activation), to in situ analyze carbon accumulation by ethylene depletion when ethanol interacts with acidic sites present on the support. Modification of Ni-Al mixed oxides with titania was shown to have several benefits. CO₂, NH₃, and propylamine sorption data indicate a decrease in the strength of acidic and basic sites after addition of titania, which in turn slowed down the carbon accumulation during the ED reaction. These changes in interactions between ethanol and byproducts with the support led to different reaction pathways in SRE, indicating that the catalysts obtained by EISA with titania addition showed higher ethylene selectivity and CO₂/CO ratios. The opposite was observed for the impregnated catalysts, which were less coke-stable during ED reactions and showed no ethylene selectivity in SRE. Carbon formed during ED reactions was shown to be thermodynamically less favorable and easier to decompose in the presence of titania. All catalysts studied displayed similar and high selectivities (∼80%) and yields (∼5.3 mol_H2/mol_ethanol) toward H₂, which place them among the most active and selective catalysts for SRE. These results indicate the importance of tailoring the support surface acidity to achieve high reforming performance and higher selectivity toward SRE, one of the key processes to produce cleaner and efficient fuels. For an efficient reforming process, the yield of byproducts is low but still they affect the catalyst stability in the long-run, thus this work may impact future studies toward development of near-zero coke catalysts.

Catalytic Reforming of Oxygenates: State of the Art and Future Prospects

This Review describes recent advances in the design, synthesis, reactivity, selectivity, structural, and electronic properties of the catalysts for reforming of a variety of oxygenates (e.g., from simple monoalcohols to higher polyols, then to sugars, phenols, and finally complicated mixtures like bio-oil). A comprehensive exploration of the structure-activity relationship in catalytic reforming of oxygenates is carried out, assisted by state-of-the-art characterization techniques and computational tools. Critical emphasis has been given on the mechanisms of these heterogeneous-catalyzed reactions and especially on the nature of the active catalytic sites and reaction pathways. Similarities and differences (reaction mechanisms, design and synthesis of catalysts, as well as catalytic systems) in the reforming process of these oxygenates will also be discussed. A critical overview is then provided regarding the challenges and opportunities for research in this area with a focus on the roles that systems of heterogeneous catalysis, reaction engineering, and materials science can play in the near future. This Review aims to present insights into the intrinsic mechanism involved in catalytic reforming and provides guidance to the development of novel catalysts and processes for the efficient utilization of oxygenates for energy and environmental purposes.

Oxidative steam reforming of methane over nickel catalysts supported on Al2O3–CeO2–La2O3

Nickel supported on Al₂O₃–CeO₂–La₂O₃ provided excellent catalytic features and high coking resistance in oxidative steam reforming of methane.

Nano bimetallic alloy of Ni–Co obtained from LaCoxNi1−xO3 and its catalytic performance for steam reforming of ethanol

Bimetallic alloy nanoparticles of Ni–Co were obtained from reducing LaCo_xNi_1−xO₃ and this method should be extended to prepare various bimetallic or polymetallic nanoparticles.

Morphological Effect of Pd Catalyst on Ethanol Electro-Oxidation Reaction

In the present study, three different structures with preferentially exposed crystal faces were supported on commercial carbon black by the polyol method (nanoparticles (NP/C), nanobars (NB/C) and nanorods (NR/C)). The electrocatalysts were characterized by XRD, TEM, TGA and cyclic voltammetry at three different ethanol concentrations. Considerable differences were found in terms of catalytic electroactivity. At all ethanol concentrations, the trend observed for the ethanol oxidation peak potential was preserved as follows: NB/C < NP/C< NR/C < commercial Pd/C. This result indicates that, from a thermodynamics point of view, the NB/C catalyst enclosed by Pd(100) facets presented the highest activity with respect to ethanol electro-oxidation among all of the catalysts studied.