Effect of the Alcohol Cosolvent in the Removal of Caffeine by Activated Carbons

Evaluation of hydrochar from peach stones for caffeine removal from aqueous medium and treatment of a synthetic mixture

The presence of micropollutants, such as caffeine (CAF), has been detected throughout the world, since conventional treatment plants are not able to properly degrade them. CAF is a widely consumed stimulant, and has been demanding the development of efficient methodologies for its removal. Aiming at the agriculture waste valorization, a new hydrochar was developed based on chemical and thermal modification of peach stones (mod-PS) for CAF removal from water and from a synthetic mixture. The morphology, functional groups and surface electrical charge of the adsorbent were characterized by SEM, FTIR and zeta potential, respectively. Regarding CAF adsorption performance, the equilibrium time was reached at 480 min and the pseudo-second-order model presented the best fit for the experimental data. The maximum adsorption capacity was 68.39 mg g-1 (298 K) and the Langmuir model exhibited a better fit for the isothermal data. The thermodynamic properties confirmed that the process was exothermic, spontaneous and reversible. The main adsorption mechanisms were hydrogen bonds and π-interactions. The global removal efficiency was satisfactory in the synthetic mixture simulating real wastewater (67%). Therefore, the proposed new hydrochar has potential application as a low-cost adsorbent for CAF removal.

Theoretical verification on adsorptive removal of caffeine by carbon and nitrogen-based surfaces: Role of charge transfer, π electron occupancy, and temperature

Eliminating an emerging water pollutant, caffeine molecules, from an aqueous solution using carbon and nitrogen-based adsorbents is of significant interest to public health. These adsorbents have been shown to have decent adsorption capacity toward caffeine due to their surface functionality. Therefore, screening various carbon and nitrogen-based surfaces can be a better option for high-performance adsorbents to remove caffeine efficiently from wastewater. Herein, we present combined first principles and molecular dynamics quantification of the adsorption enthalpies of caffeine molecules on the possible active sites of carbon and nitrogen-based adsorbents (graphene, phagraphene, graphdiyne, single-wall carbon nanotube, fullerene, and graphitic carbon nitride) with the incorporation of Van der Waals interactions. From the DFT calculations, N-doped carbon surfaces show the highest adsorption energies of single and dimer CAF compared to pristine carbon-based adsorbents. A charge density difference and Bader charge analysis display that high charge transfer occurs between the caffeine's oxygen and the surface's nitrogen atoms. An abundance of π-electrons from the nitrogen atoms, composed of large electron clouds of aromatic rings on the graphitic carbon surface, tends to favor extensive π-π interactions with the caffeine molecule. The high value of pz electron occupancy (1.445) of N in the hexagonal ring of the graphitic surface transfers additional charge transfer, which leads to strong adsorption energy of CAF than pristine surfaces. Also, the g-C3N4 surface adsorbs the CAF molecule with higher adsorption than other N-doped carbon surfaces due to the high pz_eo (1.5448) of N atoms on the surface. At 310 K, the water molecules' kinetics aids the single and dimer caffeine molecules to adsorb with the highest adsorption energies on the active sites of g-C3N4 surfaces than graphene adsorbent.

Probing the activation mechanism of nitrogen-doped carbonaceous materials for persulfates: Based on the differences between peroxymonosulfate and peroxydisulfate

The activation processes of persulfates by metal-free nitrogen-doped carbonaceous material (NCM) remain unclear due to their complex structures and heterogeneous nature. On the other hand, from the perspective of persulfates, it is possible to clarify the reaction between persulfates and NCM by considering the differences in activation behaviors between peroxymonosulfate (PMS) and peroxydisulfate (PDS). Our study aims to compare the differences between NCM-PDS and NCM-PMS using a fully metal-free NCM as a model catalyst. Firstly, NCM-PDS was more efficient than NCM-PMS in degrading phenolic compounds (PCs). Secondly, the stoichiometric ratio between consumed persulfates and DCP removed in the NCM-PDS (0.73) is lower than in the NCM-PMS (1.08). Thirdly, PMS and PDS adsorb on NCM in different ways, suggesting that the peak O-O bond in PDS has blue shifted from 814 cm^-1 to 805 cm^-1, while that of O-O bond in PMS has shifted from 889 cm^-1 to 834 cm^-1. Additionally, the hydrogen bond between the phenolic group and oxidants plays a critical role in PCs degradation by NCM-PDS, exhibiting a stronger pH effect and higher kinetic isotope effects (KIEs) than NCM-PMS. A proton-coupled electron transfer process has been proposed for PCs degradation using NCM-PDS, and a scheme of reaction pathways has been provided for the NCM-PMS/PDS-PCs system. The study results provide a deeper understanding of the activation of persulfates by NCM, as well as a strategy for selecting oxidants.

Competitive adsorption of methanol co-solvent and dioctyl phthalate on functionalized graphene sheet: Integrated investigation by molecular dynamics simulations and quantum chemical calculations

HYPOTHESIS

Organic co-solvents, which are universally employed in adsorption studies of hydrophobic organic chemicals (HOCs), can inhibit HOC adsorption by competing for active sites on the adsorbent. The adsorbent structure can influence co-solvent interference of HOC adsorption; however, this effect remains unclear, leading to an incomplete understanding of the adsorption mechanism.

EXPERIMENTS

In this study, dioctyl phthalate (DOP) was used to investigate competitive adsorption on functionalized graphene sheet in a water-methanol co-solvent system through molecular dynamics simulations and quantum chemical calculations.

FINDINGS

The simulations showed that the functional groups in the graphene defects had a strong adsorption affinity for methanol. The adsorbed methanol occupied a large number of active sites at the graphene center, thereby weakening DOP adsorption. However, the methanol adsorbed at the graphene edges could not compete with DOP for the active sites. -COOH had the strongest binding affinity for methanol among the functional groups and thus predominantly controlled the interaction between graphene and methanol. This study makes an innovative contribution toward understanding the competitive adsorption of methanol and DOP on functionalized graphene sheet, especially in visualizing the competition for active sites, and provides theoretical guidance for the removal of HOCs and practical application of graphene.

A Review of Caffeine Adsorption Studies onto Various Types of Adsorbents

A systematic literature review of publications from 2000 to 2020 was carried out to identify research trends on adsorbent materials for the removal of caffeine from aqueous solutions. Publications were retrieved from three databases (Scopus, Web of Science, and Google Scholar). Words "adsorption AND caffeine" were examined into titles, abstracts, and keywords. A brief bibliometric analysis was performed with emphasis on the type of publication and of most cited articles. Materials for the removal of caffeine were classified according to the type of material into three main groups: organic, inorganic, and composites, each of them subdivided into different subgroups consistent with their origin or production. Tables resume for each subgroup of adsorbents the key information: specific surface area, dose, pH, maximum adsorption capacity, and isotherm models for the removal of caffeine. The highest adsorption capacities were achieved by organic adsorbents, specifically those with granular activated carbon (1961.3 mg/g) and grape stalk activated carbon (916.7 mg/g). Phenyl-phosphate-based porous organic polymer (301 mg/g), natural sandy loam sediment (221.2 mg/g), composites of MCM-48 encapsulated graphene oxide (153.8 mg/g), and organically modified clay (143.7 mg/g) showed adsorption capacities lower than those of activated carbons. In some activated carbons, a relation between the specific surface area (SSA) and the maximum adsorption capacity (Q max) was found.

Caffeine removal from aqueous media by adsorption: An overview of adsorbents evolution and the kinetic, equilibrium and thermodynamic studies

Caffeine is an emerging pollutant and is considered the most representative pollutant of the Pharmaceutical Active due to its high consumption by the general population. It can be used to track pollution caused by humans. Different technologies have been employed to remove the caffeine from aqueous media, however the adsorption has been preferred due to its simplicity, high removal efficiency, operational and implementation facility and low cost. This paper provides a systematic review of the published peer-reviewed literature concerned with caffeine removal by the adsorption process. The Scopus and ScienceDirect databases were used to identify relevant articles researches on caffeine removal. Many authors have studied caffeine's adsorption equilibrium in aqueous media, different conditions, and different adsorbents. This paper aims to uncover the overall trend of adsorbent used, kinetic and thermodynamic studies. The impact of pH, temperature, adsorbent dosage and competitive effect were presented and analyzed. It was observed that the adsorption capacities ranged between 10 and 1000 mg g^-1, according to the nature and properties of the adsorbent. The pseudo-second order (kinetic model) and the Langmuir isotherm model showed the best adjustment of the experimental data from caffeine adsorption in most studies. The mechanistic understanding of adsorption and the development of new adsorbents are still a matter of future research, as well as the use of other kinetic models based on statistical factors and the thermodynamic studies should be considered.

Biodiesel production waste as promising biomass precursor of reusable activated carbons for caffeine removal

Turning waste into valuable products: K₂CO₃ activation of rapeseed residues from biodiesel industry for the production of new and reusable activated carbons for caffeine removal from water.

Sustainable activated carbons prepared from a sucrose-derived hydrochar: remarkable adsorbents for pharmaceutical compounds

Biomass as key to water reclamation: sugar-derived carbons allow high adsorption capacities for the removal of pharmaceuticals from water.