The Behavior of Chitosan in Solvents with Different Ionic Strengths

Recent Insights into Glucose-Responsive Concanavalin A-Based Smart Hydrogels for Controlled Insulin Delivery

Many efforts are continuously undertaken to develop glucose-sensitive biomaterials able of controlling glucose levels in the body and self-regulating insulin delivery. Hydrogels that swell or shrink as a function of the environmental free glucose content are suitable systems for monitoring blood glucose, delivering insulin doses adapted to the glucose concentration. In this context, the development of sensors based on reversible binding to glucose molecules represents a continuous challenge. Concanavalin A (Con A) is a bioactive protein isolated from sword bean plants (Canavalia ensiformis) and contains four sugar-binding sites. The high affinity for reversibly and specifically binding glucose and mannose makes Con A as a suitable natural receptor for the development of smart glucose-responsive materials. During the last few years, Con A was used to develop smart materials, such as hydrogels, microgels, nanoparticles and films, for producing glucose biosensors or drug delivery devices. This review is focused on Con A-based materials suitable in the diagnosis and therapeutics of diabetes. A brief outlook on glucose-derived theranostics of cancer is also presented.

Dimension and Flexibility of Polystyrenesulfonate Chains in Methanol-Water

The influence of the relative permittivity of the solvent medium on the single-chain dimension and flexibility of sodium polystyrenesulfonate chains has been investigated in mixed solvent media of methanol and water using viscosity experiments. Particular attention has been paid to explore the effect of the added low-molar-mass electrolyte. The root-mean-square (rms) radii of gyration of the chains in the unperturbed state have been calculated by applying the Flory model, while the intrinsic persistence lengths by the Benoit-Doty equation on the basis of the Kratky-Porod worm-like chain model. Estimation of the expansion factors for the rms radius of gyration, and the electrostatic persistence length helps evaluate the rms radii of gyration and the total persistence length of polystyrenesulfonate chains in the presence of varying amount of the supporting electrolyte. The polyion chains are highly extended at low ionic strengths but exhibit coil-like behavior with small persistence lengths when an excess of the supporting electrolyte is added in all the methanol-water mixtures investigated. Specifically, in the investigated solvent media, the polystyrenesulfonate chains have been found to shrink by ∼63-65% in the θ-state from their expanded conformation in the presence of 0.0001 mol L-1 NaCl. The chain dimensions pass through a maximum as the medium becomes richer in methanol, which could be explained by the formation and breakup of internal rings involving the polyion chain and water and/or methanol molecules. The intrinsic persistence length of sodium polystyrenesulfonate in a methanol-water mixture containing 0.1 mole fraction of methanol is ca. 1.3 times that in a medium with 0.3 mole fraction of methanol, indicating that flexibility of the polyion depends appreciably on the relative permittivity of the medium.

Diversity of Bioinspired Hydrogels: From Structure to Applications

Hydrogels are three-dimensional networks with a variety of structures and functions that have a remarkable ability to absorb huge amounts of water or biological fluids. They can incorporate active compounds and release them in a controlled manner. Hydrogels can also be designed to be sensitive to external stimuli: temperature, pH, ionic strength, electrical or magnetic stimuli, specific molecules, etc. Alternative methods for the development of various hydrogels have been outlined in the literature over time. Some hydrogels are toxic and therefore are avoided when obtaining biomaterials, pharmaceuticals, or therapeutic products. Nature is a permanent source of inspiration for new structures and new functionalities of more and more competitive materials. Natural compounds present a series of physico-chemical and biological characteristics suitable for biomaterials, such as biocompatibility, antimicrobial properties, biodegradability, and nontoxicity. Thus, they can generate microenvironments comparable to the intracellular or extracellular matrices in the human body. This paper discusses the main advantages of the presence of biomolecules (polysaccharides, proteins, and polypeptides) in hydrogels. Structural aspects induced by natural compounds and their specific properties are emphasized. The most suitable applications will be highlighted, including drug delivery, self-healing materials for regenerative medicine, cell culture, wound dressings, 3D bioprinting, foods, etc.

Development of Hybrid Materials Based on Chitosan, Poly(Ethylene Glycol) and Laponite® RD: Effect of Clay Concentration

In the context of increasing interest in biomaterials with applicability in cosmetics and medicine, this research aims to obtain and characterize some hybrid materials based on chitosan (CS) (antibacterial, biocompatible, and biodegradable), poly(ethylene glycol) (PEG) (non-toxic and prevents the adsorption of protein and cell) and Laponite^® RD (Lap) (bioactive). The rheological properties of the starting dispersions were investigated and discussed related to the interactions developed between components. All samples exhibited gel-like properties, and the storage modulus of CS/PEG dispersion increased from 6.6 Pa to 657.7 Pa by adding 2.5% Lap. Structural and morphological characterization of the films, prepared by solution casting method, was performed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and polarized light microscopy (POM). These analyses proved the incorporation of Lap into CS/PEG films and revealed the morphological changes of the films by the addition of clay. Thereby, at the highest Lap concentration (43.8%), the "house of cards" structure formed by Lap platelets, which incorporate chitosan chains, as evidenced by SEM and POM. Two stages of degradation between 200 °C and 410 °C were evidenced for the films with Lap concentration higher than 38.5%, explained by the existence of a clay-rich phase (given by the clay network) and chitosan-rich one (due to the intercalation of chitosan in the clay network). CS/PEG film with 43.8% Lap showed the highest swelling degree of 240.7%. The analysis of the obtained results led to the conclusion that the addition of clay to the CS/PEG films increases their stability in water and gives them greater thermal stability.

Liquid-liquid and liquid-solid separation in self-assembled chitosan-alginate and chitosan-pectin complexes

The complexation between two oppositely charged polyelectrolytes (PE) can lead liquid-liquid (complex coacervates, CC) or liquid-solid (solid precipitates, SP) phase separations. Herein, the effect of pH (2-11) and ionic strength (I, 0.05-1.0 M KCl) on the associative interactions between chitosan (QL)-alginate (SA) and QL-Pectin (Pec), polysaccharides widely used in biotechnology field, is described. pH and I, exhibited significant effect on the structure and phase transitions by modifying the ionization degree (α), pk_a, and associative interactions between PE. Onset of binding was established at pH_c 9, while continued acidification (pH_τ 5.8) led to simultaneous CC and SP exhibiting a maximum turbidity in both systems. At pH_δ 4.0, QL-Pec showed preferably CC structures whereas QL-SA maintained the CC and SP structures. At pH_ω 2, the associative interactions were suppressed due to the low ionization of Pec and SA. I (1.0 M) significantly diminished the interactions in QL-Pec due to charge screening. Molecular weight, second virial coefficient, hydrodynamic size, ionizable groups, and persistence length of polyion, influenced on the phase behavior of QL-Pec and QL-SA systems. Therefore, CC and SP are found simultaneously in both systems, their transitions can be modulated by intrinsic and environmental conditions, expanding the functional properties of complexed polysaccharides.

Mucoadhesive Marine Polysaccharides

Mucoadhesive polymers are of growing interest in the field of drug delivery due to their ability to interact with the body’s mucosa and increase the effectiveness of the drug. Excellent mucoadhesive performance is typically observed for polymers possessing charged groups or non-ionic functional groups capable of forming hydrogen bonds and electrostatic interactions with mucosal surfaces. Among mucoadhesive polymers, marine carbohydrate biopolymers have been attracting attention due to their biocompatibility and biodegradability, sample functional groups, strong water absorption and favorable physiochemical properties. Despite the large number of works devoted to mucoadhesive polymers, there are very few systematic studies on the influence of structural features of marine polysaccharides on mucoadhesive interactions. The purpose of this review is to characterize the mucoadhesive properties of marine carbohydrates with a focus on chitosan, carrageenan, alginate and their use in designing drug delivery systems. A wide variety of methods which have been used to characterize mucoadhesive properties of marine polysaccharides are presented in this review. Mucoadhesive drug delivery systems based on such polysaccharides are characterized by simplicity and ease of use in the form of tablets, gels and films through oral, buccal, transbuccal and local routes of administration.

Chitosan: A review of molecular structure, bioactivities and interactions with the human body and micro-organisms

Chitosan has many desirable attributes e.g. antimicrobial properties and promoting wound healing, and is used in various applications. This article first discusses how degree of deacetylation (DD) and molecular weight (MW) impacts on what level of bioactivities chitosan manifests, then introduces the "molecular chain configuration" model to explain various possible mechanisms of antimicrobial interactions between chitosan with different MW and different types of bacteria. Similarly, the possible pathways of how chitosan reacts with cancer and the body's immune system to demonstrate immune and antitumor effects are also discussed by using this model. Moreover, the possible mechanisms of how chitosan enhances coagulation and wound healing are also discussed. With these beneficial bioactivities in mind, the application of chitosan in surgery, tissue engineering and oncology is outlined. This review concludes that as chitosan demonstrates many beneficial bioactivities via multiple mechanisms, it is an important polymer with a promising future in medicine.

Efficient Treatment of Fish Intestinal Parasites Applying a Membrane-Penetrating Oral Drug Delivery Nanoparticle

Nanodelivery of drugs aims to ensure drug stability in the face of adverse biochemical conditions in the course of administration, concomitant with appropriate pharmacological action provided by delivery at the targeted site. In this study, the application potential of a nanoparticle produced with biopolymers chitosan-N-arginine and alginate as an oral drug delivery material is evaluated. Both macromolecules being weak polyelectrolytes, the nanoparticle presents strong thermodynamic interactions with a biological model membrane consisting of a charged lipid liposome bilayer, leading to membrane disruption and membrane penetration of the nanoparticles in ideal conditions of pH corresponding to the oral route. The powder form of the nanoparticle was obtained by lyophilization and with a high percentage of entrapment of the anthelmintic drug praziquantel. In vivo studies were conducted with oral administration to Corydoras schwartzi fish with high intensity of intestinal parasites infection. The in vivo experiments confirmed the mucoadhesive and revealed membrane-penetrating properties of the nanoparticle by translocating the parasite cyst, which provided target drug release and reduction of over 97% of the fish intestinal parasites. Thus, it was evidenced that the nanoparticle was effective in transporting and releasing the drug to the target, providing an efficient treatment.

Conformation and persistence length of chitosan in aqueous solutions of different ionic strengths via asymmetric flow field-flow fractionation

Conformation of chitosan in acidic aqueous solutions is strongly influenced by ionic strength, but the conventional employed size exclusion chromatography is limited to high ionic strength. Here we show that conformation of chitosan in acetate buffer down to millimolar ionic strength can be studied via asymmetric flow field-flow fractionation (AF4), where the separation is governed by the diffusion properties of the chitosan molecules and assisted by the electrostatic repulsion of the polyelectrolyte from the channel membrane. The size of chitosan decreases with ionic strength due to increasing screening of the polyelectrolyte effect. The persistence length of chitosan in the solutions, obtained by fitting the conformation plot by the wormlike chain model, decreases linearly with the Debye screening length from 44.5 nm at a salt concentration of 1.25 mM dominated by the electrostatic contribution to 8.6 nm in 800 mM acetate buffer close to its intrinsic persistence length of 7.7 nm.

New insights into physicochemical aspects involved in the formation of polyelectrolyte complexes based on chitosan and dextran sulfate

Polyelectrolyte complexation is a technique based on interactions between polyelectrolytes of opposite charges driven by supramolecular interactions. Although many studies address the formation of polyelectrolyte complexes (PECs), few explore strategies and tools to select the best working conditions and are often based on empirical choices. This study evaluates the influence of pH, molecular weight, and polymeric proportion on the formation of PECs based on chitosan:dextran sulfate. In addition, it assesses the approaches that study the influence of pH on the zeta potential of polymeric dispersions as a tool in the design of PECs. Results showed that nanoparticles with an excess of polycation formed aggregates, while an excess of dextran sulfate reduced the size of the particles. The graph of zeta potential as a function of pH proved to be a promising tool in the choice of polymers and a better pH condition in the development of PECs.

Electrophoretic deposition of collagen/chitosan films with copper-doped phosphate glasses for orthopaedic implants

Coatings with bioactive properties play a key role in the success of orthopaedic implants. Recent studies focused on composite coatings incorporating biocompatible elements that can increase the nucleation of hydroxyapatite (HA), the mineral component of bone, and have promising bioactive and biodegradable properties. Here we report a method of fabricating composite collagen, chitosan and copper-doped phosphate glass (PG) coatings for biomedical applications using electrophoretic deposition (EPD). The use of collagen and chitosan (CTS) allows for the co-deposition of PG particles at standard ambient temperature and pressure (1 kPa, 25 °C), and the addition of collagen led to the steric stabilization of PG in solution. The coating composition was varied by altering the collagen/CTS concentrations in the solutions, as well as depositing PG with 0, 5 and 10 mol% CuO dopant. A monolayer of collagen/CTS containing PG was obtained on stainless steel cathodes, showing that deposition of PG in conjunction with a polymer is feasible. The mass of the monolayer varied depending on the polymer (collagen, CTS and collagen/CTS) and combination of polymer + PG (collagen-PG, CTS-PG and collagen/CTS-PG), while the presence of copper led to agglomerates during deposition at higher concentrations. The deposition yield was studied at different time points and showed a profile typical of constant voltage deposition. Increasing the concentration of collagen in the PG solution allows for a higher deposition yield, while pure collagen solutions resulted in hydrogen gas evolution at the cathode. The ability to deposit polymer-PG coatings that can mimic native bone tissue allows for the potential to fabricate orthopaedic implants with tailored biological properties with lower risk of rejection from the host and exhibit increased bioactivity.

Halloysite Nanotubes Coated by Chitosan for the Controlled Release of Khellin

In this work, we have developed a novel strategy to prepare hybrid nanostructures with controlled release properties towards khellin by exploiting the electrostatic interactions between chitosan and halloysite nanotubes (HNT). Firstly, khellin was loaded into the HNT lumen by the vacuum-assisted procedure. The drug confinement within the halloysite cavity has been proved by water contact angle experiments on the HNT/khellin tablets. Therefore, the loaded nanotubes were coated with chitosan as a consequence of the attractions between the cationic biopolymer and the halloysite outer surface, which is negatively charged in a wide pH range. The effect of the ionic strength of the aqueous medium on the coating efficiency of the clay nanotubes was investigated. The surface charge properties of HNT/khellin and chitosan/HNT/khellin nanomaterials were determined by ζ potential experiments, while their morphology was explored through Scanning Electron Microscopy (SEM). Water contact angle experiments were conducted to explore the influence of the chitosan coating on the hydrophilic/hydrophobic character of halloysite external surface. Thermogravimetry (TG) experiments were conducted to study the thermal behavior of the composite nanomaterials. The amounts of loaded khellin and coated chitosan in the hybrid nanostructures were estimated by a quantitative analysis of the TG curves. The release kinetics of khellin were studied in aqueous solvents at different pH conditions (acidic, neutral and basic) and the obtained data were analyzed by the Korsmeyer-Peppas model. The release properties were interpreted on the basis of the TG and ζ potential results. In conclusion, this study demonstrates that halloysite nanotubes wrapped by chitosan layers can be effective as drug delivery systems.

Viscosity of Semidilute and Concentrated Nonentangled Flexible Polyelectrolytes in Salt-Free Solution

We report viscosity data of nonentangled sodium polystyrene sulfonate (NaPSS) in salt-free aqueous solution as a function of polymer concentration ( c) and degree of polymerization ( N). Different empirical equations are examined and found not to describe the semidilute solution viscosity over a wide concentration range and/or to yield values of [η] that do not match dilute solution measurements. Deviations from the scaling prediction of η_sp ∝ c^1/2 (Fuoss' law) are observed at high concentrations. Specifically, we find η_sp ≈ N^1.26 c^1/2 e^{1.4 c} in the semidilute regime, which agrees with the scaling prediction only for c ≲ 0.02 M. The viscosity data presented in this study and in earlier reports show a high degree of consistency. A comparison with diffusion measurements for NaPSS in salt-free solution by Oostwal and co-workers suggests that the disagreement between the scaling theory and experiments does not arise solely from the concentration dependence of the monomeric friction coefficient.

Interaction Between Chitosan and Mucin: Fundamentals and Applications

The term chitosan (CS) refers to a family of aminopolysaccharides derived from chitin. Among other properties, CS is nontoxic, mucoadhesive and can be used for load and transport drugs. Given these and other physicochemical and biological properties, CS is an optimal biopolymer for the development of transmucosal drug delivery systems, as well as for the treatment of pathologies related to mucosal dysfunctions. Mucins are glycoprotein macromolecules that are the major components of mucus overlaying epithelia. CS interacts with mucin and adsorbs on and changes the rheology of mucus. However, CS and mucins denote families of polymers/macromolecules with highly variable chemical structure, properties, and behavior. To date, their interactions at the molecular level have not been completely unraveled. Also, the properties of complexes composed of CS and mucin vary as a function of the sources and preparation of the polymers. As a consequence, the mucoadhesion and drug delivery properties of such complexes vary as well. The breadth of this review is on the molecular interactions between CS and mucin. In particular, in vitro and ex vivo characterization methods to investigate both the interactions at play during the formation of CS-mucin complexes, and the advances on the use of CS for transmucosal drug delivery are addressed.

An accurate coarse-grained model for chitosan polysaccharides in aqueous solution

Computational models can provide detailed information about molecular conformations and interactions in solution, which is currently inaccessible by other means in many cases. Here we describe an efficient and precise coarse-grained model for long polysaccharides in aqueous solution at different physico-chemical conditions such as pH and ionic strength. The Model is carefully constructed based on all-atom simulations of small saccharides and metadynamics sampling of the dihedral angles in the glycosidic links, which represent the most flexible degrees of freedom of the polysaccharides. The model is validated against experimental data for Chitosan molecules in solution with various degree of deacetylation, and is shown to closely reproduce the available experimental data. For long polymers, subtle differences of the free energy maps of the glycosidic links are found to significantly affect the measurable polymer properties. Therefore, for titratable monomers the free energy maps of the corresponding links are updated according to the current charge of the monomers. We then characterize the microscopic and mesoscopic structural properties of large chitosan polysaccharides in solution for a wide range of solvent pH and ionic strength, and investigate the effect of polymer length and degree and pattern of deacetylation on the polymer properties.

Biopolymer-Targeted Adsorption onto Halloysite Nanotubes in Aqueous Media

Studies on the adsorption of biopolymers onto halloysite nanotubes (HNTs) in water were conducted. Three polymers with different charges-anionic (pectin), neutral (hydroxypropyl cellulose), and cationic (chitosan)-were chosen. The thermodynamic parameters for the adsorption of polymers onto the HNT surface were determined by isothermal titration calorimetry (ITC). The experimental data were interpreted based on a Langmuir adsorption model. The standard variations in free energy, enthalpy, and entropy of the process were obtained and discussed. Turbidimetry was used to evaluate the stability of functionalized nanoparticles in water. The ζ-potential clarified the surface charge properties of functionalized nanotubes upon polymer adsorption. The interaction of modified nanotubes with polymers led to the formation of a colloidal system with tunable stability and surface properties, which offers different perspectives on new applications of these dispersions, such as carriers for substances to be released in response to external stimuli.

Chitosan as stabilizing agent for negatively charged nanoparticles

Chitosan is a biocompatible polysaccharide with positive Z potential which can stabilize negative charged nanoparticles. Silk fibroin nanoparticles and citrate gold nanoparticles, both with negative Z potential, but they form aggregates at physiological ionic strength. In this work, we study the behavior of chitosan in solution when the ionic strength of the medium is increased and how the concentration of chitosan and the proportion of the two components (chitosan and AuNP or SFN) significantly affect the stability and size of the nanocomposites formed. In addition to experimental measurements, molecular modeling were used to gain insight into how chitosan interacts with silk fibroin monomers, and to identify the main energetic interactions involved in the process. The optimum values for obtaining the smallest and most homogeneous stable nanocomposites were obtained and two different ways of organization through which chitosan may exert its stabilizing effect were suggested.

Tuning the formation and stability of microcapsules by environmental conditions and chitosan structure

The goal of this work is to tune the formation and stability of the alginate-chitosan (AC) polyelectrolyte complexes (PECs) and microcapsules. Particularly, we explore the role of the conformation of chitosan on its interaction with alginate to understand the mechanism underpinning their interactions at the molecular level. Reducing the charge density by increasing pH will increase the compactness of chitosan, the values of the enthalpy (H) and stoichiometry (N) of binding between chitosan and alginate. Consequently, chitosan has advantage in being adsorbed on alginate beads to form microcapsules, including the binding rate and binding amount. Though the total heat release remain similar in the range of ionic strength, chitosan diffuses much easier into alginate hydrogels when in higher ionic strength. Increasing pH and ionic strength both help AC microcapsules to have higher stability. The results indicate that the formation and stability of AC microcapsules are related to the rigidity and conformations of chitosan molecules. After increasing acetylation degree (DA) of chitosan, the binding rate of chitosan and mechanical strength of AC microcapsules are both reduced. This work demonstrates the versatility and feasibility of tuning the formation and stability of polysaccharide microcapsules by physical factors and chitosan chemical structures.

Intrinsic viscosity and conformational parameters of xanthan in aqueous solutions: salt addition effect

The intrinsic viscosity and conformational parameters of xanthan in aqueous solutions were investigated at 25°C as a function of salt nature (NaCl and KCl) and concentration (up to 3×10(-1)mol/L). The viscometric parameters were evaluated by applying semi-empirical equations proposed by Rao and Wolf. The results show that the new model proposed by Wolf provides accurate intrinsic viscosity values comparable with those obtained by using traditional methods. The experimental data were modeled with Boltzmann sigmoidal equation. The stiffness parameter, hydrodynamic volume and viscometric expansion factor were determined and discussed. With increasing salt concentration, the hydrodynamic volume and the viscometric expansion factor decrease and the critical overlap concentration increases, reaching limiting values above a given salt concentration. The high Huggins constant values suggest the existence of aggregates for salt concentrations above 5×10(-2) and 3×10(-3)mol/L for NaCl and KCl, respectively. Stiffness parameter was determined by Smidsrød and Haug method as being 5.45×10(-3), indicating a rigid conformation for xanthan macromolecules in solution.

A novel method to estimate the stiffness of carbohydrate polyelectrolyte polymers based on the ionic strength dependence of zeta potential

Polysaccharides have received a great deal of attention from, for example, the food, cosmetic and pharmaceutical industries. Their conformations (flexibility/stiffness) span a wide range of conformational flexibilities with large hydrated volumes, these properties are important in relation to polysaccharide structure-function relationships. Perhaps the simplest parameter available to estimate the dilute solution conformation of polysaccharides is the Smidsrød-Haug stiffness parameter (B) where the stiffness of polyelectrolytes can be estimated by measuring the intrinsic viscosity at a number of different ionic strengths. In this paper we propose an alternative method for estimating the Smidsrød-Haug stiffness parameter (B) using the ionic strength dependency of zeta potential. For this purpose we have studied a number of different polysaccharides.

Strong and conductive chitosan-reduced graphene oxide nanocomposites for transdermal drug delivery

Chitosan-reduced graphene oxide (rGO) nanocomposites were synthesized through a biocompatible reduction process and were first reported for applications in transdermal drug delivery devices, such as microneedle arrays. Introducing rGO improved the mechanical properties of chitosan, with the strongest nanocomposites containing 1 wt% and 2 wt% rGO chosen to undergo drug delivery testing. The addition of rGO increased the electrical conductivity of chitosan, allowing the nanocomposites to be used for electroporation or iontophoresis drug delivery applications. The rGO content was proven to be an important factor for drug delivery due to the bonding of drug onto rGO. Increasing the rGO content allowed for a quicker and more substantial drug release, allowing for a controlled drug release rate. The nanocomposites also exhibited pH dependent release behaviour, with a reduced release rate in the presence of an acidic medium. The biodegradation rate of chitosan decreased when rGO was added but the biodegradation rates of the nanocomposites are not dependent on the rGO concentration, with nanocomposites of 1 wt% and 2 wt% rGO possessing a similar biodegradation path. The use of the nanocomposite in a microneedle array was shown through compression testing and drug release testing in a pseudo-in vivo environment.