High Pressure Mixing Rheology of Drilling Fluids

Thermal and Rheological Properties of Hydrophobic Nanosilica in Sunflower Oil Suspensions at High Pressures

Nowadays, the reduction of the environmental impact associated with the operation of the oil industry is a primary concern. A growing trend is to develop low-toxicity formulations based on biodegradable components. In this sense, vegetable oils structured with nanomaterials could be an alternative to mineral or synthetic oils for sustainable fluid formulations. Hydrophobic fumed silica nanoparticles have the capability to change the rheological behavior of oil in suspensions, providing a large variety of non-Newtonian behaviors over a wide range of temperatures, from shear-thinning to gel-like, depending on the concentration and the nanosilica’s hydrophobicity, that permits the design of fluids with selected characteristic and applications. This work explores the microstructure and the rheological behavior of hydrophobic fumed silica dispersed in a sunflower oil as a function of temperature and pressure. The results suggest that the suspensions of hydrophobic silica in sunflower oil reveals appropriate rheological and thermal properties over a wide range of temperatures and pressures to serve as components of sustainable drilling fluids.

Influence of Formate Concentration on the Rheology and Thermal Degradation of Xanthan Gum

Xanthan gum solutions have gained increasing interest for their use as environmentally friendly chemicals in the oil industry. Xanthan is compatible with most concentrate brines used for controlling formation damage and fluid loss. Particularly, formate brines reinforce the ordered structure of the biopolymer in solution, gel strength, and the specific gravity of the resulting fluid. In this paper, we studied the effect of thermal aging on the rheological behavior of xanthan solutions as a function of the concentration in potassium formate. Ionic strength below a threshold concentration does not prevent the degradation of the structure of xanthan after being submitted to aging at 165 °C. Aged solutions show an important loss of strength in their mechanical properties, lower pH, and higher content in furfural and hydroxymethylfurfural. Highly concentrated formate brines are necessary to maintain the strength of the rheological properties after exposure to high-temperature environments.

Use of Carbon Additives towards Rechargeable Zinc Slurry Air Flow Batteries

The performance of redox flow batteries is notably influenced by the electrolyte, especially in slurry-based flow batteries, as it serves as both an ionic conductive electrolyte and a flowing electrode. In this study, carbon additives were introduced to achieve a rechargeable zinc slurry flow battery by minimizing the zinc plating on the bipolar plate that occurs during charging. When no carbon additive was present in the zinc slurry, the discharge current density was 24 mA∙cm−2 at 0.6 V, while the use of carbon additives increased it to up to 38 mA∙cm−2. The maximum power density was also increased from 16 mW∙cm−2 to 23 mW∙cm−2. Moreover, the amount of zinc plated on the bipolar plate during charging decreased with increasing carbon content in the slurry. Rheological investigation revealed that the elastic modulus and yield stress are directly proportional to the carbon content in the slurry, which is beneficial for redox flow battery applications, but comes at the expense of an increase in viscosity (two-fold increase at 100 s−1). These results show how the use of conductive additives can enhance the energy density of slurry-based flow batteries.