Viscosity of Prehydrolysis Liquor of a Hardwood Kraft-Based Dissolving Pulp Production Process

A Novel and Effective Recyclable BiOCl/BiOBr Photocatalysis for Lignin Removal from Pre-Hydrolysis Liquor

The presence of lignin hampers the utilization of hemicelluloses in the pre-hydrolysis liquor (PHL) from the kraft-based dissolving pulp production process. In this paper, a novel process for removing lignin from PHL was proposed by effectively recycling catalysts of BiOCl/BiOBr. During the whole process, BiOCl and BiOBr were not only adsorbents for removing lignin, but also photocatalysts for degrading lignin. The results showed that BiOCl and BiOBr treatments caused 36.3% and 33.9% lignin removal, respectively, at the optimized conditions, and the losses of hemicellulose-derived saccharides (HDS) were both 0.1%. The catalysts could be regenerated by simple photocatalytic treatment and obtain considerable CO and CO2. After 15 h of illumination, 49.9 μmol CO and 553.0 μmol CO2 were produced by BiOCl, and 38.7 μmol CO and 484.3 μmol CO2 were produced by BiOBr. Therefore, both BiOCl and BiOBr exhibit excellent adsorption and photocatalytic properties for lignin removal from pre-hydrolysis.

Microwave-assisted recovery of monomeric sugars from an acidic steam treated wood hydrolysate

Fractionation of components from bio-refinery wastes streams is complicated by the presence of both oligomer and lignin fractions. Microwave-assisted acid hydrolysis was used in this study to convert oligomer sugars in an industrial prehydrolysis liquor (PHL) to monomeric sugars. A total of 19.6 g/L monomeric sugars was obtained at a combined severity factor (CSF) of 3.2. Furthermore, it was found that xylan linked to lignin in a lignin-carbohydrate complex (LCC) could be liberated, resulting in lignin with a relatively low dispersity (3.12) and average molecular weight (1718 g/mol) that has high commercial value in the phenol–formaldehyde resin industry. This study presents for the first time a relatively inexpensive method for recovery of 100% of available sugars in the PHL without apparent loss in monomeric sugar as well as 50% removal of lignin as a valuable by-product. Application of this method can significantly improve the economic sustainability of forest-based biorefineries.

Evaluation of an integrated process to fully utilize bamboo biomass during the production of bioethanol

Aiming for the complete utilization of bamboo biomass, an integrated process which combines ethanol production with the recovery of silica and lignin was proposed. To reduce chemical charge required for the fractionation of silica and lignin from bamboo and improve the digestibility of the obtained substrate, a sequentially two-stage pretreatment process of autohydrolysis and alkaline extraction was carried out. From the view of enhancing enzymatic hydrolysis and recovery of silica and lignin, a two-stage treatment of autohydrolysis at 180°C for 90min followed by alkaline extraction at 100°C with 6% NaOH (based on pretreated chips) for 120min was optimized. About 93.7% of original silica and 75.7% of original lignin could be recovered from bamboo. Enzymatic hydrolysis and fermentation of carbohydrates showed that an overall sugar yield of 88.6% of original sugar content and an ethanol recovery of 0.467g/g sugar were achieved based on the proposed scheme.