Experimental Study of Cucurbit[7]uril Derivatives Modified Acrylamide Polymer for Enhanced Oil Recovery

Experimental Study on High-Performers Quaternary Copolymer Based on Host-Guest Effect

A quaternary polymer (HGP) was prepared by the free-radical polymerization of acrylamide, acrylic acid, maleic anhydride functionalized β-cyclodextrin (MAH-β-CD), and N-(3-methacrylamidopropyl)-N, N-dimethylnaphthalen-1-aminium chloride (NAP). It was found that host–guest behavior occurred most effectively at a molar rate of NAP and CD with 1:1, which exhibited better solubility than hydrophobically associative polymer. Moreover, the as-prepared polymer has superior salt tolerance, shear resistance, and viscoelasticity due to host–guest strategy. More importantly, the HGP solution simulates the distribution of formation water in the Bohai SZ1-1 oilfield has good rheological properties at 120 °C. All results show that the proposed polymer could be a competitive candidate in oilfield applications such as fracturing fluids, displacement fluids, and drilling fluids.

Potential Applications of Cucurbit[n]urils and Their Derivatives in the Capture of Hazardous Chemicals

Cucurbit[n]urils (Q[n]s) are a relatively young family of macrocycles, consisting of glycoluril units bridged by methylene groups, and their unique structures have attracted extensive attention from chemists in recent decades. Due to the presence of a rigid hydrophobic inner cavity and two polar outer portals lined with carbonyl groups, Q[n]s not only encapsulate guest species into the cavity, but also coordinate with metal ions/clusters. Considerable achievements have been obtained in the fields of Q[n]s-based host-guest chemistry, coordination chemistry, as well as the combination of host-guest and coordination chemistry. Furthermore, the outer surface of Q[n]s has been demonstrated to be capable of interacting with definite species to generate supramolecular architectures in recent years. With more in-depth research into Q[n]s, their application studies have also emerged as a hot topic. This Minireview focuses on recent advances in the potential applications of solid-state materials based on Q[n]s and their derivatives for the capture and adsorption of hazardous chemicals from a solution or a gas mixture.

Interaction and Adsorption of Hydrophobically Modified Polyacrylamide on Silica and Asphaltene Surfaces

The adsorption of polymers affects the cost and oil recovery in oil reservoir exploitation and the flocculation effect in the treatment of oil sand tailings. The adhesion and adsorption of a hydrophobically modified polyacrylamide (HMPAM), i.e., P(AM-NaAA-C16DMAAC), on silica and asphaltene were investigated using surface force measurements, thermodynamic analysis and quartz crystal microbalance with dissipation (QCM-D) measurement. Our study indicates that HMPAM polymer has strong interaction with both silica and asphaltene. The adhesion force of HMPAM on silica was stronger than that on asphaltene surface. Consistently, the adsorption of HMPAM was also greater on silica surface, with a more rigid layer formed on the surface. For HMPAM/silica system, the attractive interaction and the strong adhesion are mainly driven by the hydrogen bonding and electrostatic interaction. For HMPAM/asphaltene system, it is mainly due to hydrophobic interaction between the long hydrocarbon chains of HMPAM and asphaltene. Furthermore, continuous adsorption of HMPAM was detected and multiple layers formed on both silica and asphaltene surfaces, which can be attributed to the hydrophobic chains of HMPAM polymers. This work has illustrated the interaction mechanism of HMPAM polymer on hydrophilic silica and hydrophobic asphaltene surfaces, which provide insight into the industrial applications of hydrophobically modified polymer.

Effects of zinc acetate and cucurbit[6]uril on PP composites: crystallization behavior, foaming performance and mechanical properties

In this study, polypropylene (PP) foams were prepared with 1.0 wt% of cucurbit[6]uril (Q[6]), zinc acetate (Zn(Ac)2), Zn@Q[6] (a supramolecular compound synthesized from Q[6] and Zn(Ac)2), or a mixture of Zn(Ac)2 and Q[6] (weight ratio of 1:1) through injection molding in the presence of a chemical blowing agent, azodicarbonamide. The effect of the additions on the crystallization behavior and foaming performance of PP and the mechanical characterizations of the foaming samples were determined. The results showed that the additions can change the crystallization type from homogeneous to heterogeneous, increase the crystallization rate and shrink the size but increase the density of spherulites. Among the additions, Q[6] most significantly altered the crystallization properties. Scanning electron microscopy (SEM) images revealed that the PP foaming performance can be improved by Zn(Ac)2 addition at a lower temperature (175°C); however, further increasing the temperature had an undesirable effect. Q[6] exhibited the optimum foaming improvement effect on PP in a wide temperature range (175–195°C). Adding nanoparticles also enhanced the tensile properties, flexural strength and impact strength of foaming PP at low temperatures. However, with increasing temperature, the poor cell structure demonstrated undesirable effects in terms of tensile strength, flexural strength and impact strength.

Synthesis and separation of cucurbit[n]urils and their derivatives

Cucurbit[n]uril chemistry has become an important part of contemporary supramolecular chemistry since cucurbit[n]urils (Q[n]s) are not only able to encapsulate various guests, but are also capable of coordinating to a wide range of metal ions, leading to the establishment of Q[n]-based host-guest chemistry and coordination chemistry. Each of these impressive developments can be attributed to the growth of protocols for obtaining Q[n]s. In this review, we survey synthetic procedures for obtaining cucurbit[n]urils and their substituted derivatives together with the separation and purification of these remarkable compounds. The coverage is aimed at both existing workers in the field as well as at those requiring an "entry" into Q[n]-based research.

Synthesis of a cationic polyacrylamide by a photocatalytic surface-initiated method and evaluation of its flocculation and dewatering performance: nano-TiO2 as a photo initiator

In the face of complex water quality changes, the application of existing cationic polyacrylamide has been largely limited. In this study, a series of cationic polyacrylamides (TPADs) with excellent flocculation/dewatering performance and low dosage were synthesized through photocatalytic surface initiation using acrylamide (AM) and acryloyloxyethyl trimethylammonium chloride (DAC) as monomers and nano-TiO₂ as an initiator. Characterization using Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (¹H NMR) spectroscopy, thermogravimetric/differential scanning calorimetry (TG/DSC) and scanning electron microscopy (SEM) was used to analyze the structural and morphological properties of TPADs. The initiation mechanism was described and the study on the properties of TPADs shows that the initiation method could obtain the copolymer with extra-high intrinsic viscosity. Furthermore, the flocculation and dewatering performance of TPADs and PADs were investigated in the micro-polluted low turbidity water flocculation test and sludge dewatering test. The application experimental results indicated that TPADs showed satisfactory turbidity removal and sludge dewatering performance by virtue of strong charge neutralization and a bridging effect. The excellent flocculation/dewatering performance was attributed to the photocatalytic surface-initiated method and the nano-TiO₂ initiator. Therefore, it is expected to open up new initiation methods in the synthesis of polymeric flocculants for a broad variety of applications.

In the face of complex water quality changes, the application of existing cationic polyacrylamide has been largely limited.

Design and Study of a Novel Thermal-Resistant and Shear-Stable Amphoteric Polyacrylamide in High-Salinity Solution

Abstract: Water-soluble polymers are widely used in oilfields. The rheological behaviors of these polymers in high-salinity solution are very important for stimulation of high-salinity reservoirs. In this work, a novel thermal-resistant and shear-stable amphoteric polyacrylamide (PASD), prepared from acrylamide (AM), sodium styrene sulfonate (SSS), and acryloxyethyl trimethylammonium chloride (DAC) monomers, was prepared by free-radical polymerization in high-salinity solution. The amphoteric polyacrylamide was characterized by Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis, thermogravimetric analysis (TG), and scanning electron microscopy (SEM). The amphoteric polyacrylamide exhibited excellent salinity tolerance. The slow increase in apparent viscosity of the polymer with increase in salinity was interesting. The amphoteric polyacrylamide showed perfect temperature resistance in high-salinity solution. The viscosity retention reached 38.9% at 120 °C and was restored to 87.8% of its initial viscosity when temperature was decreased to room temperature. The retention ratio of apparent viscosity reached 49.7% at 170 s^-1 and could still retain it at 25.8% at 1000 s^-1. All these results demonstrated that PASD had excellent thermal-resistance and shear-stability in high-salinity solution. We expect that this work could provide a new strategy to design polymers with excellent salinity-tolerance, thermal-resistance, and shear-stability performances.

Phosphate removal and recovery from water using nanocomposite of immobilized magnetite nanoparticles on cationic polymer

A novel nanocomposite (NC) based on magnetite nanoparticles (Fe3O4-NPs) immobilized on the surface of a cationic exchange polymer, C100, using a modification of the co-precipitation method was developed to obtain magnetic NCs for phosphate removal and recovery from water. High-resolution transmission electron microscopy-energy-dispersive spectroscopy, scanning electron microscopy , X-ray diffraction, and inductively coupled plasma optical emission spectrometry were used to characterize the NCs. Continuous adsorption process by the so-called breakthrough curves was used to determine the adsorption capacity of the Fe3O4-based NC. The adsorption capacity conditions were studied under different conditions (pH, phosphate concentration, and concentration of nanoparticles). The optimum concentration of iron in the NC for phosphate removal was 23.59 mgFe/gNC. The sorption isotherms of this material were performed at pH 5 and 7. Taking into account the real application of this novel material in real water, the experiments were performed at pH 7, achieving an adsorption capacity higher than 4.9 mgPO4-P/gNC. Moreover, Freundlich, Langmuir, and a combination of them fit the experimental data and were used for interpreting the influence of pH on the sorption and the adsorption mechanism for this novel material. Furthermore, regeneration and reusability of the NC were tested, obtaining 97.5% recovery of phosphate for the first cycle, and at least seven cycles of adsorption-desorption were carried out with more than 40% of recovery. Thus, this work described a novel magnetic nanoadsorbent with properties for phosphate recovery in wastewater.

A novel α-aminophosphonic acid-modified acrylamide-based hydrophobic associating copolymer with superb water solubility for enhanced oil recovery

Here we report a novel α-aminophosphonic acid-modified acrylamide-based hydrophobic associating copolymer. The copolymer exhibits significant potential as an enhanced oil recovery chemical for high-temperature and high-mineralization oilfields.

A water-soluble hyperbranched copolymer based on a dendritic structure for low-to-moderate permeability reservoirs

An excellent matching relationship in size exists between HPDA and the pore throat with a permeability reservoir of under 500–100 mD.

A novel water-soluble hydrophobically associating polyacrylamide based on oleic imidazoline and sulfonate for enhanced oil recovery

We report here a novel imidazoline functionalized hydrophobically associating copolymer that exhibits excellent rheological properties and outstanding potential for enhanced oil recovery.

Preparation of an allyloxy-cucurbit[6]uril-modified polymer monolithic column for microextraction of estrogens in cosmetics

An allyloxy-cucurbit[6]uril modified poly(butyl methacrylate-co-ethylene dimethacrylate) monolithic column was prepared and used for the microextraction of estrogens in cosmetics coupled with HPLC-DAD.

Direct syntheses of cucurbit[7]uril-anchored polyacrylic acid microspheres and adsorption of basic dyes by the derivative

A series of cucurbit[7]uril-anchored polyacrylic acids were synthesized using (NH₄)₂S₂O₈ as both an initiator and oxidant. The polymers were further esterified with 2-naphthol to yield derivatives, which could be used as a stationary phase for the absorption of basic dyes.