Characterization and Experimental and Computational Assessment of Kola nitida Extract for Corrosion Inhibiting Efficacy

Experimental and DFT studies on the ultrasonic energy-assisted extraction of the phytochemicals of Catharanthus roseus as green corrosion inhibitors for mild steel in NaCl medium

Catharanthus roseus (Apocynaceae family) extract is rich in organic phytochemicals such as alkaloids, polyphenolic compounds, and flavonoids. It contains several functional entities such as fused heterocycles, and hydroxyl and carbonyl groups, which could be useful for corrosion inhibition of mild steel in NaCl environments. In the present work, ultrasonic energy was used to obtain the ethanolic extracts of root and stem which were then tested as corrosion inhibitors for mild steel in the presence of 3.5% NaCl. The corrosion inhibition process was studied by UV-visible spectroscopy, Fourier transform infrared spectroscopy, atomic force microscopy, weight loss, and electrochemical methods. After immersing in the corrosive medium, the microstructures of mild steel were investigated by scanning electron microscopy, X-ray diffraction, and ellipsometry. The extract of C. roseus showed excellent adsorption on mild steel surface as confirmed by DFT calculations. The results indicate that the extract of C. roseus acts as a mixed type corrosion inhibitor, where the stem extract is the most efficient inhibitor in 3.5% NaCl solution possibly due to the higher active area of stem phytochemicals.

C. roseus phytochemicals are physisorbed on the 111 Fe surface, and the oxygen non-bonding electron chemisorbed on the polarized state 111 Fe surface.

Capability of Aganonerion polymorphum leaf-water extract in protecting hydrochloric acid induced steel corrosion

A new green water extract as an environmentally friendly and high-performing inhibitor for steel corrosion.

Inhibition of Acid Corrosion of Mild Steel Using Delonix regia Leaves Extract

The inhibition efficacy of aqueous extracts of the leaves ofDelonixregia(DR) in 1 M HCl and 0.5 M H2SO4have been investigated using weight loss, electrochemical and surface probe techniques. DR extract inhibited mild steel corrosion in both acidic environments via adsorption of the extract organic matter on the metal/solution interface. Potentiodynamic polarization results indicate that DR is a mixed type inhibitor in both acidic environments, whereas the impedance results revealed adsorption of the DR species on a corroding steel surface. Increase in inhibition efficiency was concentration dependent. The adsorption followed Langmuir adsorption isotherm. Scanning electron microscopy (SEM) results revealed the formation of a protective layer adsorbed on a mild steel surface in the acid solutions.