Comprehensive Investigation on the Thermal Stability of 66 Ionic Liquids by Thermogravimetric Analysis

New biologically active ionic liquids with benzethonium cation-efficient SAR inducers and antimicrobial agents

BACKGROUND

An urgent need to find new methods for crop protection remains open due to the withdrawal from the market of the most toxic pesticides and increasing consumer awareness. One of the alternatives that can be used in modern agriculture is the use of bifunctional compounds whose actions towards plant protection are wider than those of conventional pesticides.

RESULTS

In this study, we present the investigation of the biological efficacy of nine dual-functional salts containing a systemic acquired resistance (SAR)-inducing anion and the benzethonium cation. A significant result of the presented study is the discovery of the SAR induction activity of benzethonium chloride, which was previously reported only as an antimicrobial agent. Moreover, the concept of dual functionality was proven, as the application of presented compounds in a given concentrations resulted both in the control of human and plant bacteria species and induction of SAR.

CONCLUSION

The strategy presented in this article shows the capabilities of derivatization of common biologically active compounds into their ionic derivatives to obtain bifunctional salts. This approach may be an example of the design of potential new compounds for modern agriculture. It provides plants with two complementary actions allowing to provide efficient protection to plants, if one mode of action is ineffective. © 2024 Society of Chemical Industry.

Synthesis and physical properties of tunable aryl alkyl ionic liquids based on 1-aryl-4,5-dimethylimidazolium cations

We present a new class of tunable aryl alkyl ionic liquids (TAAILs) based on 1-aryl-4,5-dimethylimidazolium cations with electron-withdrawing and -donating substituents in different positions of the phenyl ring and the bis(trifluoromethylsulfonyl)imide (NTf2) anion. We investigated the effect of additional methyl groups in the backbone of the imidazolium core on the physical properties regarding viscosity, conductivity and electrochemical window. With an electrochemical window of up to 6.3 V, which is unprecedented for TAAILs with an NTf2 anion, this new class of TAAILs demonstrates the opportunities that arise from modifications in the backbone of the imidazolium cation.

Enabling wide temperature battery operation with hybrid lithium electrolytes

We demonstrate that an ionic liquid 1-ethyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide combined with propylene carbonate and lithium bis(trifluoromethanesulfonyl)imide yields a hybrid electrolyte that enables a wide operational temperature window (-20 °C to 60 °C). When integrated into a lithium titanate‖lithium cobalt oxide full-cell configuration, high-rate capability is achieved at -20 °C with >40% retention at a C/2 cycling rate, and negligible capacity fade is observed during rate capability tests and long-term cycling at 60 °C.

A Combined Experimental/Computational Study of Dicationic Ionic Liquids with Bromide and Tungstate Anions

A panel of dicationic ionic liquids (DILs) with different rigid xylyl (ortho, meta, para) spacers and different anions (bromide and tungstate) has been synthetised and characterised through different experimental and computational techniques. Differences and analogies between the systems are analysed using information derived from their DFT structures, semiempirical dynamics, thermal behaviour, and catalytic properties versus the well-known reaction of CO2 added to epichlorohydrin. A comparison between the proposed systems and some analogues that present non-rigid spacers shows the key effect displayed by structure rigidity on their characteristics. The results show an interesting correlation between structure, flexibility, properties, and catalytic activity.

Thermal Stability of Protic Ionic Liquids

While protic ionic liquids (ILs) have found great success as solvents for a broad range of applications, little is known about their degradation when exposed to temperatures above ambient for extended periods of time. Here, we report the thermal stability of six protic ILs, namely, ethylammonium nitrate, ethylammonium formate, ethylammonium acetate, ethanolammonium nitrate, ethanolammonium formate, and ethanolammonium acetate. The effect of heating each ionic liquid to 60 °C for 1 h or 1 week (sealed or open to the atmosphere) was evaluated by considering the changes to water content, pH, mass, thermal phase transitions, and molecular structure after each treatment. Heating each of the six ILs when sealed led to measurable shifts in their water content and 10 wt % pH, but there was no significant change in their mass, thermal phase transitions according to differential scanning calorimetry (DSC), or molecular structure using proton nuclear magnetic resonance (1H NMR) spectra, indicating that the samples were largely unchanged. The samples that were heated open to the atmosphere also displayed no significant changes after 1 h but displayed significant changes after 1 week.

Pyrrolidium- and Imidazolium-Based Ionic Liquids and Electrolytes with Flexible Oligoether Anions

A new class of fluorine-free ionic liquids (ILs) and electrolytes based on aliphatic flexible oligoether anions, 2-(2-methoxyethoxy)acetate (MEA) and 2-[2-(2-methoxyethoxy)ethoxy]acetate (MEEA), coupled with pyrrolidinium and imidazolium cations is introduced. For the ILs with MEEA anions, Li+ conducting electrolytes are created by doping the ILs with 30 mol % of LiMEEA. The structural flexibility of the oligoether functionality in the anion results in glass transition temperatures (Tg) as low as -60 °C for the neat ILs and the electrolytes. The imidazolium-based ILs and electrolytes reveal better thermal stabilities but higher Tg and lower electrochemical stabilities than the corresponding pyrrolidinium-based analogues. All neat ILs show comparable transport properties for the cations and these decrease by the addition of lithium salt - the pyrrolidinium-based electrolyte being affected the most.

The Coiling Effect in Ether Ionic Liquids: Exploiting Acetate as a Probe for Transport Properties and Microenvironment Analysis

The inherently high viscosity of ionic liquids (ILs) can limit their potential applications. One approach to address this drawback is to modify the cation side chain with ether groups. Herein, we assessed the structure-property relationship by focusing on acetate (OAc), a strongly coordinating anion, with 1,3-dialkylimidazolium cations with different side chains, including alkyl, ether, and hydroxyl functionalized, as well as their combinations. We evaluated their viscosity, thermal stabilities, and microstructure using Raman and infrared (IR) spectroscopies, allied to density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. The viscosity data showed that the ether insertion significantly enhances the fluidity of the ILs, consistent with the coiling effect of the cation chain. Through a combined experimental and theoretical approach, we analyzed how the OAc anion interacts with ether ILs, revealing a characteristic bidentate coordination, particularly in hydroxyl functionalized ILs due to specific hydrogen bonding with the OH group. IR spectroscopy showed subtle shifts in the acidic hydrogens of imidazolium ring C(2)-H and C(4,5)-H, suggesting weaker interactions between OAc and the imidazolium ring in ether-functionalized ILs. Additionally, spatial distribution functions (SDF) and dihedral angle distribution obtained via AIMD confirmed the intramolecular hydrogen bonding due to the coiling effect of the ether side chain.

Preparation of amino acid chiral ionic liquid and visual chiral recognition of glutamine and phenylalanine enantiomers

In this paper, the amino acid chiral ionic liquid (AACIL) was prepared with L-phenylalanine and imidazole. It was characterized by CD, FT-IR, 1H NMR, and 13C NMR spectrum. The chiral recognition sensor was constructed with AACIL and Cu(II), which exhibited different chiral visual responses (solubility or color difference) to the enantiomers of glutamine (Gln) and phenylalanine (Phe). The effects of solvent, pH, time, temperature, metal ions, and other amino acids on visual chiral recognition were optimized. The minimum concentrations of Gln and Phe for visual chiral recognition were 0.20 mg/ml and 0.28 mg/ml, respectively. The mechanism of chiral recognition was investigated by FT-IR, TEM, SEM, TG, XPS, and CD. The location of the host-guest inclusion or molecular placement has been conformationally searched based on Gaussian 09 software.

Hydrocarbon Extraction with Ionic Liquids

Separation and reaction processes are key components employed in the modern chemical industry, and the former accounts for the majority of the energy consumption therein. In particular, hydrocarbon separation and purification processes, such as aromatics extraction, desulfurization, and denitrification, are challenging in petroleum refinement, an industrial cornerstone that provides raw materials for products used in human activities. The major technical shortcomings in solvent extraction are volatile solvent loss, product entrainment leading to secondary pollution, low separation efficiency, and high regeneration energy consumption due to the use of traditional organic solvents with high boiling points as extraction agents. Ionic liquids (ILs), a class of designable functional solvents or materials, have been widely used in chemical separation processes to replace conventional organic solvents after nearly 30 years of rapid development. Herein, we provide a systematic and comprehensive review of the state-of-the-art progress in ILs in the field of extractive hydrocarbon separation (i.e., aromatics extraction, desulfurization, and denitrification) including (i) molecular thermodynamic models of IL systems that enable rapid large-scale screening of IL candidates and phase equilibrium prediction of extraction processes; (ii) structure-property relationships between anionic and cationic structures of ILs and their separation performance (i.e., selectivity and distribution coefficients); (iii) IL-related extractive separation mechanisms (e.g., the magnitude, strength, and sites of intermolecular interactions depending on the separation system and IL structure); and (iv) process simulation and design of IL-related extraction at the industrial scale based on validated thermodynamic models. In short, this Review provides an easy-to-read exhaustive reference on IL-related extractive separation of hydrocarbon mixtures from the multiscale perspective of molecules, thermodynamics, and processes. It also extends to progress in IL analogs, deep eutectic solvents (DESs) in this research area, and discusses the current challenges faced by ILs in related separation fields as well as future directions and opportunities.

Facile Separation of Acetic Acid from 1-Ethyl-3-methylimidazolium Acetate Ionic Liquid with the Aid of a Protic Solvent

1-Ethyl-3-methylimidazolium acetate (EmimAc), an excellent solvent for cellulosic biomass, is expected to be utilized in chemical conversion, such as in biomass acetylation with acetic anhydride. The corresponding carboxylic acid, acetic acid (AcH), is quantitatively generated as a byproduct and should be separated from EmimAc for recycling. However, the strong interaction between EmimAc and AcH makes their separation difficult under moderate conditions. This study examined the efficacy of protic solvents in distillation and extraction to weaken this interaction through solvation or hydrogen-bonding interactions. The separation efficiency of AcH from EmimAc via distillation increased as the boiling point of the protic solvent increased. Water addition was more effective than the addition of alcohols with boiling points similar to those of water such as 1-propanol and 2-butanol. Furthermore, the favorable effect of water addition on the extraction of AcH was confirmed using common organic solvents, such as diisopropyl ether, diethyl ether, and ethyl acetate. The partition coefficient (α) of AcH between the aqueous and organic phases increased with an increasing dielectric constant of the organic solvent, whereas the α value of EmimAc decreased. Repeated treatments in both distillation and extraction facilitated the complete separation of AcH from EmimAc.

Preparation, Characterization, in-vitro and in-vivo Pharmacokinetic Evaluation of Thermostable Dimethyl Fumarate Cocrystals

Dimethyl fumarate (DMF) is an FDA-approved drug for treating relapsing-remitting multiple sclerosis; but it is susceptible to sublimation leading to its loss during processing. Cocrystals can protect against thermal energy via the interaction of DMF with a coformer via weak forces of interaction. With this hypothesis, we have, for the first time, prepared DMF cocrystals using the solvent evaporation method using coformers like citric acid and succinic acid screened by in-silico predictions and hydrogen bonding properties. Analysis using infra-red (IR), powder x-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and sublimation evaluation characterized cocrystals and their thermostability. Comparative analysis of the release profile has been done by dissolution and pharmacokinetic study of DMF and its cocrystals. The cocrystals have improved thermal stability and better pharmacological activities than DMF. In the safety and efficacy evaluation of the formulated cocrystals, they were found to be non-cytotoxic, antioxidant, and inhibiting IL-6 and TNF-α in PBMC induced by lipopolysaccharide (LPS). We have obtained cocrystals of DMF with improved thermal stability and better pharmacological activities than DMF.

Ionic liquids and deep eutectic solvents for the stabilization of biopharmaceuticals: A review

Biopharmaceuticals have allowed the control of previously untreatable diseases. However, their low solubility and stability still hinder their application, transport, and storage. Hence, researchers have applied different compounds to preserve and enhance the delivery of biopharmaceuticals, such as ionic liquids (ILs) and deep eutectic solvents (DESs). Although the biopharmaceutical industry can employ various substances for enhancing formulations, their effect will change depending on the properties of the target biomolecule and environmental conditions. Hence, this review organized the current state-of-the-art on the application of ILs and DESs to stabilize biopharmaceuticals, considering the properties of the biomolecules, ILs, and DESs classes, concentration range, types of stability, and effect. We also provided a critical discussion regarding the potential utilization of ILs and DESs in pharmaceutical formulations, considering the restrictions in this field, as well as the advantages and drawbacks of these substances for medical applications. Overall, the most applied IL and DES classes for stabilizing biopharmaceuticals were cholinium-, imidazolium-, and ammonium-based, with cholinium ILs also employed to improve their delivery. Interestingly, dilute and concentrated ILs and DESs solutions presented similar results regarding the stabilization of biopharmaceuticals. With additional investigation, ILs and DESs have the potential to overcome current challenges in biopharmaceutical formulation.

Process Simulation and Optimization on Ionic Liquids

Ionic liquids (ILs) are promising alternative compounds that enable the development of technologies based on their unique properties as solvents or catalysts. These technologies require integrated product and process designs to select ILs with optimal process performances at an industrial scale to promote cost-effective and sustainable technologies. The digital era and multiscale research methodologies have changed the paradigm from experiment-oriented to hybrid experimental-computational developments guided by process engineering. This Review summarizes the relevant contributions (>300 research papers) of process simulations to advance IL-based technology developments by guiding experimental research efforts and enhancing industrial transferability. Robust simulation methodologies, mostly based on predictive COSMO-SAC/RS and UNIFAC models in Aspen Plus software, were applied to analyze key IL applications: physical and chemical CO2 capture, CO2 conversion, gas separation, liquid-liquid extraction, extractive distillation, refrigeration cycles, and biorefinery. The contributions concern the IL selection criteria, operational unit design, equipment sizing, technoeconomic and environmental analyses, and process optimization to promote the competitiveness of the proposed IL-based technologies. Process simulation revealed that multiscale research strategies enable advancement in the technological development of IL applications by focusing research efforts to overcome the limitations and exploit the excellent properties of ILs.

Ionic liquids in capillary electrophoresis analysis of proteins and carbohydrates

Ionic liquids (ILs), as non-molecular type solvents, possess excellent physical-chemical properties, which make them useful in important separation applications in gas chromatography, liquid chromatography, and capillary electrophoresis. Among a plethora of potential uses of ionic liquids in separation science, capillary electrophoresis can utilize its resolution-enhancing effect in the analysis of proteins and carbohydrates, via the formation of intermolecular interactions, e.g., hydrophobic, hydrogen bonding, or electrostatic. ILs and polymeric ionic liquids (PIL) also represent an excellent choice as background electrolyte (BGE) additives for capillary coatings in CE, which is especially important in protein analysis. Another interesting utilization of ILs is the fabrication of monoliths for capillary electrochromatography in which instance the mechanism of retention is based on ion exclusion interactions. Carbohydrates can also be readily analyzed by CE with the help of ionic liquids without the need for an extra derivatization step. One of the future perspectives on the use of ILs is their utilization in the recently emerging biopharmaceutical industry exploiting the increased resolution of proteins and carbohydrates, two of the important components of glycoprotein therapeutics. In this paper, we address the so-far not-reviewed ionic liquid-mediated analysis of proteins and carbohydrates by capillary electrophoresis-based techniques also addressing their impact on the separation mechanism.

Performance of ionic liquid functionalized metal organic frameworks in the adsorption process of phenol derivatives

The growth of industrial activities has produced a significant increase in the release of toxic organic pollutants (OPs) to the environment from industrial wastewater. On this premise, this study reports the use of metal organic frameworks (MOFs) impregnated with various ionic liquids (ILs) in the adsorption of phenol derivatives, i.e., 2,6-dimethylphenol and 4,4'-dihydroxybiphenyl. MOFs were prepared starting from 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) with divalent (Co, Ni, Cu) and trivalent (Ce) metal salts in mild hydrothermal conditions using water as a green solvent. Imidazolium base ionic liquids, namely 1-butyl-3-methylimidazolium trifluoromethanesulfonate, 1-butyl-3-methylimidazolium nitrate, 1-butyl-3-methylimidazolium chloride, and 1-hexyl-3-methyl-imidazolium chloride, were used to modify MOFs, leading to composite materials (IL@MOF), which show the structural characteristics of MOFs, and complement the advantages of ILs. SEM, EDX images, and TG data indicate that the IL is just attached on the surface of the adsorbent material, with no changes in crystal size or morphology, but with slightly altered thermal stabilities of IL@MOF composites compared to the original ILs and MOFs, pointing to some interionic interaction between IL and MOF. This research consists of equilibrium experiments, studying the effect of the initial concentration of OPs on the adsorption efficiency of the as-prepared MOFs and IL@MOF, in order to determine the influence of the nature of the adsorbent on its developed adsorption capacity and to investigate the performance of both ILs and MOFs. To determine the maximum adsorption capacity, several empirical isotherms were used: Langmuir, Freundlich, Redlich-Peterson, and Dubinin-Radushkevich. The characteristic parameters for each isotherm and the correlation coefficient (R2) were identified. The IL modification of MOFs increased the adsorption capacity of IL@MOF for the removal of phenol derivatives from aqueous solution. The adsorption capacity function of the MOF structure follows the trend CeHEDP > CoHEDP > NiHEDP > CuHEDP. The best performance was achieved by adsorbent materials based on Ce.

A comparative study of ammonia solubility in imidazolium-based ionic liquids with different structural compositions

Four imidazolium-based ionic liquids (ILs) with two cations 1-pentyl-3-butylimidazolium [PBIM]+ and 1-benzyl-3-butylimidazolium tetrafluoroborate [BzBIM]+, and two anions tetrafluoroborate (BF4-) and trifluoromethanesulfonate (OTf-) were synthesized for NH3 solubility enhancement. The structural, thermal, and electrochemical stabilities, ionic conductivity, and viscosity of the four ILs, namely, [PBIM]BF4, [BzBIM]BF4, [PBIM]OTf, and [BzBIM]OTf, were investigated. Due to the intermolecular interaction of the benzyl group attached to the imidazolium ring, [BzBIM]+-based ILs exhibited higher thermal stability but lower ionic conductivity compared to [PBIM]+-based ILs. Further, the NH3 solubility in all ILs was measured using a custom-made setup at temperatures ranging from 293.15 to 323.15 K and pressures ranging from 1 to 5 bar. The effects of the cation and anion structures of ILs, as well as pressure and temperature, on the NH3 solubility in the ILs were also investigated. [PBIM]BF4 showed the best solubility because of its high free volume and low viscosity. Density functional calculations validated the superior NH3 solubility in [PBIM]BF4, attributable to the minimal reorganization of the [cation]anion complex geometry during the solvation process, yielding a low solvation free energy. The findings of this study suggest that ILs exhibit a high NH3 solubility capacity and cation and anion structures considerably affect the NH3 solubility in ILs.

Optimizing the method for removing MSNs templates using an ionic liquid ([C4mim]Cl)

The key step in preparing mesoporous silica is to remove the organic template agent, and the most common method used to achieve this goal is high-temperature calcination. However, this method has many disadvantages, one of which is that it reduces the silanol density on the surface of mesoporous silica, which affects its subsequent modification. Ionic liquids (ILs) are often used as extractants. In this work, the 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) IL is considered, and the effects of its concentration, reaction temperature, and reaction time as well as HCl concentration on the extraction rate and silanol density were investigated using an IL extraction template agent (cetyl trimethyl ammonium bromide (CTAB)). The results show that an IL concentration of 10%, a reaction temperature of 120 °C, a reaction time of 12 h, and an HCl concentration of 1% are the best reaction parameters; with these parameters, the extraction rate and the silanol density were found to be 93.19% and 2.23%, respectively. The silanol density of mesoporous silica treated by calcination is only 0.81%. A higher silanol density provides more reaction sites, so that the modified mesoporous silica treated with the IL can be loaded with more Zn ions.

New adsorbent materials based on PILs for Freon refrigerants

The development of refrigerant adsorbent materials is not only essential for enhancing the efficiency of refrigeration systems but also plays a pivotal role in environmental conservation and addressing global warming challenges. However, traditional adsorbent materials are often limited in widespread applications in industrial scales due to various disadvantages, such as low adsorption efficiency, difficulties in desorption, and poor reusability. In this context, three distinct PILs, P[EVIM][PF6], P[BVIM][PF6] and P[HVIM][PF6], were synthesized and characterized. In addition, their structure as well as adsorption capacities towards three different Freon refrigerants (R12, R22 and R134a) were explored. The results indicated that the synthesized PILs had high thermal stability and exceptional adsorption capabilities, with P[EVIM][PF6] demonstrating the best adsorption performance. These PILs consistently maintain a stable saturated adsorption capacity throughout nine consecutive adsorption-desorption cycles, and the desorption rate of the adsorbent tubes consistently exceeded 96%. Thus, the superior recyclability of these PILs was verified. These PILs provide a promising route for efficient adsorption of Freon refrigerants, highlighting their potential significance in pertinent industries and environmental conservation efforts.

Ionogels for flexible conductive substrates and their application in biosensing

Ionogels are highly conductive gels made from ionic liquids dispersed in a matrix made of organic or inorganic materials. Ionogels are known for high ionic conductivity, flexibility, high thermal and electrochemical stability. These characteristics make them suitable for sensing and biosensing applications. This review discusses about the two main constituents, ionic liquids and matrix, used to make ionogels and effect of these materials on the characteristics of ionogels. Here, the material properties like mechanical, electrochemical and stability are discussed for both polymer matrix and ionic liquid. We have briefly described about the fabrication methods like 3D printing, sol-gel, blade coating, spin coating, aerosol jet printing etc., used to make films or coating of these ionogels. The advantages and disadvantages of each method are also briefly summarized. Finally, the last section provides a few examples of application of flexible ionogels in areas like wearables, human-machine interface, electronic skin and detection of biological molecules.

Revolutionizing lignocellulosic biomass: A review of harnessing the power of ionic liquids for sustainable utilization and extraction

The potential for the transformation of lignocellulosic biomass into valuable commodities is rapidly growing through an environmentally sustainable approach to harness its abundance, cost-effectiveness, biodegradability, and environmentally friendly nature. Ionic liquids (ILs) have received considerable and widespread attention as a promising solution for efficiently dissolving lignocellulosic biomass. The fact that ILs can act as solvents and reagents contributes to their widespread recognition. In particular, ILs are desirable because they are inert, non-toxic, non-flammable, miscible in water, recyclable, thermally and chemically stable, and have low melting points and outstanding ionic conductivity. With these characteristics, ILs can serve as a reliable replacement for traditional biomass conversion methods in various applications. Thus, this comprehensive analysis explores the conversion of lignocellulosic biomass using ILs, focusing on main components such as cellulose, hemicellulose, and lignin. In addition, the effect of multiple parameters on the separation of lignocellulosic biomass using ILs is discussed to emphasize their potential to produce high-value products from this abundant and renewable resource. This work contributes to the advancement of green technologies, offering a promising avenue for the future of biomass conversion and sustainable resource management.

A phosphonium ionic liquid conjugated magnetic graphitic carbon nitride nanocomposite: an effective sample pretreatment tool for selenium separation and determination

We established an innovative and easy-to-use methodology for selenium (Se) extraction and determination from real water samples utilizing a magnetic nanocomposite adsorbent (MNC-SPE) aided by an inductively coupled plasma mass spectrometry (ICP-MS) approach. The MNC-SPE adsorbent was fabricated by hybridizing Fe3O4 nanoparticles on the surface of carbon nitride nanosheets (GCN NSs) that were coated with 1-hexyl-3-methylimidazolium hexafluorophosphate ionic liquid (P-IL). A variety of techniques were used to thoroughly analyze the structural and chemical characteristics of MNC-SPE, and appear to have a great number of diverse active surface functional units (imidazole ring and -NH3+). In order to optimize the key factors affecting the Se extraction, parameters including the adsorbent dosage, contact time, eluent type, eluent volume, eluent time, and reusability of adsorbent were extensively studied. The proposed approach was validated under the optimal reaction conditions, and it showed good linearity between 0.15 and 100 pg μL-1 with a significant R2 value (R2 = 0.9994) toward Se metal. Besides, the Se limit of detection (LOD) and limit of quantification (LOQ) are 0.063 pg μL-1 and 0.147 pg μL-1, respectively. Further, by utilizing tap and river water samples, the applicability of the validated method was tested; the approach showed high Se recovery values in the range of 87.6-115.5% for the spiked real-world samples and the interday and intraday precision (RSD%) values of the approach were 4.8% (n = 6). The MNC-SPE can be regenerated and reused for four consecutive extraction-desorption cycles by employing 0.5 M NaOH eluent.

Solvation Shell Anatomy of H2S and CO Dissolved in Reline and Ethaline Deep Eutectic Solvents

Rising atmospheric concentrations of anthropogenic hydrogen sulfide (H2S) and carbon monoxide (CO) as a result of industrialization have encouraged researchers to explore innovative technologies for capturing these gases. Deep eutectic solvents (DESs) are an alternative media for mitigating H2S and CO emissions. Herein, we have employed ab initio molecular dynamics simulations to investigate the structures of the nearest-neighbor solvation shells surrounding H2S and CO when they are dissolved in reline and ethaline DESs. We aim to delineate the structural arrangement responsible for favorable H2S and CO capture by analyzing the key interactions between H2S and CO solutes with various components of the DESs. We observe that in the reline-H2S system, chloride and carbonyl oxygen of urea are found to have the closest distance interaction with hydrogen atoms of the H2S solute. The sulfur atom of H2S is found to be predominantly solvated by hydrogen and oxygen atoms of urea molecules and the hydroxyl hydrogen of choline cations. The chloride ions and ethylene glycol molecules predominantly govern the solvation of H2S in the ethaline-H2S system. In both the DESs, H2S is solvated by the hydroxyl group of the choline cations rather than by their ammonium group. In the reline-CO system, all the atoms of urea along with chloride dominate the immediate solvation shell around CO. In the ethaline-CO system, hydroxyl oxygen and hydrogen atoms of ethylene glycol are found in the nearest solvation structure around CO. Both the DESs exhibit a stronger solvent-solute charge-transfer tendency toward the H2S solute compared to CO.

Physical and Electrochemical Analysis of N-Alkylpyrrolidinium-Substituted Boronium Ionic Liquids

In this work, a series of novel boronium-bis(trifluoromethylsulfonyl)imide [TFSI-] ionic liquids (IL) are introduced and investigated. The boronium cations were designed with specific structural motifs that delivered improved electrochemical and physical properties, as evaluated through cyclic voltammetry, broadband dielectric spectroscopy, densitometry, thermogravimetric analysis, and differential scanning calorimetry. Boronium cations, which were appended with N-alkylpyrrolidinium substituents, exhibited superior physicochemical properties, including high conductivity, low viscosity, and electrochemical windows surpassing 6 V. Remarkably, the boronium ionic liquid functionalized with both an ethyl-substituted pyrrolidinium and trimethylamine, [(1-e-pyrr)N111BH2][TFSI], exhibited a 6.3 V window, surpassing previously published boronium-, pyrrolidinium-, and imidazolium-based IL electrolytes. Favorable physical properties and straightforward tunability make boronium ionic liquids promising candidates to replace conventional organic electrolytes for electrochemical applications requiring high voltages.

Effects of the Ionic Liquid Structure on Porosity of Lignin-Derived Carbon Materials

Converting lignin into advanced porous carbon materials, with desirable surface functionalities, can be challenging. While lignin-derived carbons produced by pyrolysis at >600 °C develop porosity, they also simultaneously lose nearly all their surface functional groups. By contrast, pyrolysis of lignin at lower temperatures (e.g., <400 °C) results in the formation of nonporous char that retains some surface functionalities. However, copyrolysis of lignin with some ionic liquids (ILs) at lower temperatures offers an opportunity to produce porous carbon materials with both large surface areas and an abundance of surface functional groups. This study investigates the effects of IL properties (solubility, thermal, and ionic size) on the specific surface areas of lignin-derived carbons produced by copyrolysis of lignin and ILs at 350-400 °C for 20 min. It was found that ILs that have bulky anions and small cation sizes can induce porosity in lignin-derived carbons with large surface areas. Among 16 ILs that were tested, [C2MIm][NTF2] demonstrated the best performance; the inclusion of it in the copyrolysis process resulted in lignin-derived carbons with ∼528 m2 g-1 and 0.48 cm3 g-1. Lignin-derived carbons produced using no IL, [C2MIm][NTF2], and [C4MIm][OTF] were further characterized for morphology, interfacial chemical, and elemental properties. The copyrolysis of lignin and [C2MIm][NTF2], and [C4MIm][OTF] resulted in doping of heteroatoms (N and S) on the porous carbon materials during pyrolysis reaction. The present findings contribute to a better understanding of the main property of ILs responsible for creating porosity in lignin carbon during pyrolysis.

Fluoroborate ionic liquids as sodium battery electrolytes

High-voltage sodium batteries are an appealing solution for economical energy storage applications. Currently available electrolyte materials have seen limited success in such applications therefore the identification of high-performing and safer alternatives is urgently required. Herein we synthesise six novel ionic liquids derived from two fluoroborate anions which have shown great promise in recent battery literature. This study reports for the first time the electrochemically applicable room-temperature ionic liquid (RTIL) N-ethyl-N,N,N-tris(2-(2-methoxyethoxy)ethyl)ammonium (tetrakis)hexafluoroisopropoxy borate ([N2(2O2O1)3][B(hfip)4]). The RTIL shows promising physical properties with a very low glass-transition at -73 °C and low viscosity. The RTIL exhibits an electrochemical window of 5.3 V on a glassy carbon substrate which enables high stability electrochemical cycling of sodium in a 3-electrode system. Of particular note is the strong passivation behaviour of [N2(2O2O1)3][B(hfip)4] on aluminium current-collector foil at potentials as high as 7 V (vs. Na+/Na) which is further improved with the addition of 50 mol% Na[FSI]. This study shows [B(hfip)4]- ionic liquids have the desired physical and electrochemical properties for high-voltage sodium electrolytes.

Exploring the impact of sodium salts on hydrotropic solubilization

Some ionic liquids (ILs) were shown to display a strong ability to enhance the solubility of phenolic compounds through hydrotropy. However, evidence shows that salt ions in hydrotropic aqueous solutions may change the behavior of molecules by promoting possible interactions between the components of the system, thus causing changes in solubility. Herein, we study the impact of sodium salt anions on the hydrotropic dissolution of syringic acid using 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) as a hydrotrope, with a focus on dicyanamide Na[N(CN)2] and thiocyanate Na[SCN] salts. Dynamic light scattering, Raman spectroscopy, and nuclear magnetic resonance spectroscopy were used to investigate how the mixture of IL-salts affects the solvation. The results obtained show that [C4mim]Cl is able to increase the solubility of syringic acid 80-fold. Despite their structural similarities, the presence of Na[N(CN)2] or Na[SCN] in an aqueous solution of [C4mim]Cl induced opposite solubility trends. The addition of Na[N(CN)2] promotes a higher ability to solubilize syringic acid than in the corresponding IL system due to a pH buffering effect, resulting in the deprotonation of the solute. The addition of Na[SCN], on the other hand, induces a relative decrease in syringic acid solubilization at higher concentrations of ILs due to the negative contribution of the NaCl formed by anion-exchange. These results emphasise the often overlooked pH contribution provided by ILs for biomolecule solubilisation whilst providing experimental insights into the structure of aqueous solutions of ionic liquids and the role it plays in the formation of IL-salt aggregates.

A comprehensive study demonstrating the influence of the solvent composition on the phytotoxicity of compounds, as exemplified by 2,4-D-based ILs with a choline-type cation

BACKGROUND

Growing concern for the protection of the environment and existing ecosystems has resulted in increasing consideration of phytotoxicity tests as valid ecotoxicological indicators of the potential hazards of the use of ionic liquids (ILs) or any other chemical. The objective of this study was to gain a detailed understanding of the influence of the solvent composition of spray solutions on the phytotoxic effect of foliar application of ionic pairs with weak (choline 2,4-dichlorophenoxyacetate, [Chol][2,4-D]), medium (N-hexylcholine 2,4-dichlorophenoxyacetate, [C6 Chol][2,4-D]) and good (N-dodecylcholine 2,4-dichlorophenoxyacetate, [C12 Chol][2,4-D]) surface-active properties.

RESULTS

Experimental results unambiguously demonstrated that the biological activity of the test salt solutions, particularly [Chol][2,4-D] and [C6 Chol][2,4-D], can be strongly affected by the addition of an organic solvent, such as methanol, ethanol, dimethylformamide (DMF) or dimethylsulfoxide (DMSO) compared to solutions in pure water. However, the observed tendency is less pronounced for the compound exhibiting good surface activity, [C12 Chol][2,4-D].

CONCLUSIONS

The collected findings show that caution is warranted in the exploitation or modification of methodologies for assessing phytotoxicity to ensure the reliable interpretation of obtained results for environmental risk assessment or building quantitative structure-activity relationship (QSAR) models. © 2023 Society of Chemical Industry.

A Comprehensive Review on the Thermal Stability Assessment of Polymers and Composites for Aeronautics and Space Applications

This review article provides an exhaustive survey on experimental investigations regarding the thermal stability assessment of polymers and polymer-based composites intended for applications in the aeronautical and space fields. This review aims to: (1) come up with a systematic and critical overview of the state-of-the-art knowledge and research on the thermal stability of various polymers and composites, such as polyimides, epoxy composites, and carbon-filled composites; (2) identify the key factors, mechanisms, methods, and challenges that affect the thermal stability of polymers and composites, such as the temperature, radiation, oxygen, and degradation; (3) highlight the current and potential applications, benefits, limitations, and opportunities of polymers and composites with high thermal stability, such as thermal control, structural reinforcement, protection, and energy conversion; (4) give a glimpse of future research directions by providing indications for improving the thermal stability of polymers and composites, such as novel materials, hybrid composites, smart materials, and advanced processing methods. In this context, thermal analysis plays a crucial role in the development of polyimide-based materials for the radiation shielding of space solar cells or spacecraft components. The main strategies that have been explored to improve the processability, optical transparency, and radiation resistance of polyimide-based materials without compromising their thermal stability are highlighted. The combination of different types of polyimides, such as linear and hyperbranched, as well as the incorporation of bulky pendant groups, are reported as routes for improving the mechanical behavior and optical transparency while retaining the thermal stability and radiation shielding properties. Furthermore, the thermal stability of polymer/carbon nanocomposites is discussed with particular reference to the role of the filler in radiation monitoring systems and electromagnetic interference shielding in the space environment. Finally, the thermal stability of epoxy-based composites and how it is influenced by the type and content of epoxy resin, curing agent, degree of cross-linking, and the addition of fillers or modifiers are critically reviewed. Some studies have reported that incorporating mesoporous silica micro-filler or microencapsulated phase change materials (MPCM) into epoxy resin can enhance its thermal stability and mechanical properties. The mesoporous silica composite exhibited the highest glass transition temperature and activation energy for thermal degradation among all the epoxy-silica nano/micro-composites. Indeed, an average activation energy value of 148.86 kJ/mol was recorded for the thermal degradation of unfilled epoxy resin. The maximum activation energy range was instead recorded for composites loaded with mesoporous microsilica. The EMC-5p50 sample showed the highest mean value of 217.6 kJ/mol. This remarkable enhancement was ascribed to the polymer invading the silica pores and forging formidable interfacial bonds.

Bioderived Ionic Liquids with Alkaline Metal Ions for Transient Ionics

Choline lactate, an ionic liquid composed of bioderived materials, offers an opportunity to develop biodegradable electrochemical devices. Although ionic liquids possess large potential windows, high conductivity, and are nonvolatile, they do not exhibit electrochemical characteristics such as intercalation pseudocapacitance, redox pseudocapacitance, and electrochromism. Herein, bioderived ionic liquids are developed, including metal ions, Li, Na, and Ca, to yield ionic liquid with electrochemical behavior. Differential scanning calorimetry results reveal that the ionic liquids remained in liquid state from 230.42 to 373.15 K. The conductivities of the ionic liquids with metal are lower than those of the pristine ionic liquid, whereas the capacitance change negligibly. A protocol of the Organization for Economic Co-operation and Development 301C modified MITI test (I) confirms that the pristine ionic liquid and ionic liquids with metal are readily biodegradable. Additionally, an ionic gel comprising the ionic liquid and poly(vinyl alcohol) is biodegradable. An electrochromic device is developed using an ionic liquid containing Li ions. The device successfully changes color at -2.5 V, demonstrating the intercalation of Li ions into the WO3 crystal. The results suggest that the electrochemically active ionic liquids have potential for the development of environmentally benign devices, sustainable electronics, and bioresorbable/implantable devices.

Ionic-Liquid-Mediated Deconstruction of Polymers for Advanced Recycling and Upcycling

Ionic liquids (ILs) are a promising medium to assist in the advanced (chemical and biological) recycling of polymers, owing to their tunable catalytic activity, tailorable chemical functionality, low vapor pressures, and thermal stability. These unique physicochemical properties, combined with ILs' capacity to solubilize plastics waste and biopolymers, offer routes to deconstruct polymers at reduced temperatures (and lower energy inputs) versus conventional bulk and solvent-based methods, while also minimizing unwanted side reactions. In this Viewpoint, we discuss the use of ILs as catalysts and mediators in advanced recycling, with an emphasis on chemical recycling, by examining the interplay between IL chemistry and deconstruction thermodynamics, deconstruction kinetics, IL recovery, and product recovery. We also consider several potential environmental benefits and concerns associated with employing ILs for advanced recycling over bulk- or solvent-mediated deconstruction techniques, such as reduced chemical escape by volatilization, decreased energy demands, toxicity, and environmental persistence. By analyzing IL-mediated polymer deconstruction across a breadth of macromolecular systems, we identify recent innovations, current challenges, and future opportunities in IL application toward circular polymer economies.

Novel Gastroprotective and Thermostable Cocrystal of Dimethyl Fumarate: Its Preparation, Characterization, and In Vitro and In Vivo Evaluation

Crystallization has revolutionized the field of solid-state formulations by modulating the physiochemical and release profile of active pharmaceutical ingredients (APIs). Dimethyl fumarate (DF), an FDA-approved first-line drug for relapsing-remitting multiple sclerosis, has a sublimation problem, leading to loss of the drug during its processing. To tackle this problem, DF cocrystal has been prepared by using solvent evaporation technique using nicotinamide as a coformer, which has been chosen based on in silico predictions and their ability to participate in hydrogen bonding. Fourier transform infrared (FT-IR), powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and sublimation analysis have characterized the cocrystal and its thermostability. Comparative analysis of the release profile has been done by the dissolution and pharmacokinetic study of DF and its cocrystal. Formulated cocrystal is noncytotoxic, antioxidant and inhibits interleukin-6 and tissue necrosis factor-α in peripheral blood mononuclear cells induced by lipopolysaccharide. We have obtained a thermostable cocrystal of DF with a similar physicochemical and release profile to that of DF. The formulated cocrystal also provides a gastroprotective effect which helps counterbalance the adverse effects of DF by reducing lipid peroxidation and total nitrite levels.

Lignin-Derivative Ionic Liquids as Corrosion Inhibitors

Corrosion is a significant problem that negatively affects a wide range of structures and buildings, resulting in their premature failure, which causes safety hazards and significant economic loss. For this reason, various approaches have been developed to prevent or minimize the effects of corrosion, including corrosion inhibitors. Recently, biobased inhibitors have gained a certain interest thanks to their unique properties, eco-friendliness, and availability. Among all the green precursors, lignin is of particular interest, being a natural polymer that can be obtained from different sources including agricultural residues. Corrosion inhibitors based on ionic liquids (ILs) also present interesting advantages, such as low volatility and high tunability. If combined, it may be possible to obtain new lignin-based ILs that present interesting corrosion inhibitor properties. In this work, the inhibition properties of new biobased lignin ILs and the influence of anions and cations on the corrosion of mild steel in an aqueous solution of 0.01 M NaCl were investigated by Potentiostatic Electrochemical Impedance Spectroscopy (PEIS) and Cyclic Potentiodynamic Polarization (CPP). Moreover, the surface was characterized using SEM, EDS, and optical profilometry. The IL choline syringate showed promising performance, reducing the corrosion current after 24 h immersion in 0.01 M sodium chloride, from 1.66 µA/cm² for the control to 0.066 µA/cm² with 10 mM of the IL present. In addition to its performance as a corrosion inhibitor, both components of this IL also meet or exceed the current additional desired properties of such compounds, being readily available, and well tolerated in organisms and the environment.

Separation of Palladium from Alkaline Cyanide Solutions through Microemulsion Extraction Using Imidazolium Ionic Liquids

In this paper, three imidazolium-based ionic liquids, viz., 1-butyl-3-undecyl imidazolium bromide ([BUIm]Br), 1-butyl-3-octyl imidazolium bromide ([BOIm]Br), and 1-butyl-3-hexadecyl imidazolium bromide ([BCIm]Br), were synthesized. Three novel microemulsions systems were constructed and then were used to recover Pd (II) from cyanide media. Key extraction parameters such as the concentration of ionic liquids (ILs), equilibration time, phase ratio (R_A/O), and pH were evaluated. The [BUIm]Br/n-heptane/n-pentanol/sodium chloride microemulsion system exhibited a higher extraction percentage of Pd (II) than the [BOIm]Br/n-heptane/n-pentanol/sodium chloride and [BCIm]Br/n-heptane/n-pentanol/sodium chloride microemulsion systems. Under the optimal conditions (equilibrium time of 10 min and pH 10), the extraction percentages of these metals were all higher than 98.5% when using the [BUIm]Br/n-heptane/n-pentanol/sodium chloride microemulsion system. Pd(CN)₄^2- was separated through a two-step stripping procedure, in which Fe (III) and Co (III) were first separated using KCl solution, then Pd(CN)₄^2- was stripped using KSCN solution (separation factors of Pd from Fe and Co exceeded 10³). After five extraction-recovery experiments, the recovery of Pd (II) through the microemulsion system remained over 90%. The Pd (II) extraction mechanism of the ionic liquid [BUIm]Br was determined to occur via anion exchange, as shown by spectral analysis (UV, FTIR), Job's method, and DFT calculations. The proposed process has potential applications for the comprehensive treatment of cyanide metallurgical wastewater.

Accelerated Oxidative Degradation of Phosphonium-Type Ionic Liquid with l-Prolinate Anion: Degradation Mechanism and CO2 Separation Performance

Amino acid ionic liquids (AAILs) are regarded as green alternatives to existing CO₂-sorptive materials because amino acids are readily available from renewable sources in large quantities. For widespread applications of AAILs, including direct air capture, the relationship between the stability of AAILs, especially toward O₂, and the CO₂ separation performance is of particular importance. In the present study, the accelerated oxidative degradation of tetra-n-butylphosphonium l-prolinate ([P₄₄₄₄][Pro]), a model AAIL that has been widely investigated as a CO₂-chemsorptive IL, is performed using a flow-type reactor system. Upon heating at 120-150 °C and O₂ gas bubbling to [P₄₄₄₄][Pro], both the cationic and anionic parts undergo oxidative degradation. The kinetic evaluation of the oxidative degradation of [P₄₄₄₄][Pro] is performed by tracing the decrease in the [Pro]^- concentration. Supported IL membranes composed of degraded [P₄₄₄₄][Pro] are fabricated, and the membranes retain CO₂ permeability and CO₂/N₂ selectivity values in spite of the partial degradation of [P₄₄₄₄][Pro].

Synthesis and characterization of ammonium-based protic ionic liquids for carbon dioxide absorption

A series of ammonium-based protic ionic liquids (APILs) namely ethanolammonium pentanoate [ETOHA][C5], ethanolammonium heptanoate [ETOHA][C7], triethanolammonium pentanoate [TRIETOHA][C5], triethanolammonium heptanoate [TRIETOHA][C7], tributylammonium pentanoate [TBA][C5] and tributylammonium heptanoate [TBA][C7] was synthesized via proton transfer. Their structural confirmation and physiochemical properties namely thermal stability, phase transition, density, heat capacity (Cp) and refractive index (RI) have been determined. Specifically, [TRIETOHA] APILs have crystallization peaks ranging from -31.67 to -1.00 °C, owing to their large density values. A comparison study revealed the low Cp values of APILs in comparison to monoethanolamine (MEA) which could be advantageous for APILs to be used in CO2 separation during recyclability processes. Additionally, the performance of APILs toward CO2 absorption was investigated by using a pressure drop technique under a pressure range of 1-20 bar at 298.15 K. It was observed that [TBA][C7] recorded the highest CO2 absorption capacity with the value of 0.74 mole fraction at 20 bar. Additionally, the regeneration of [TBA][C7] for CO2 absorption was studied. Analysis of the measured CO2 absorption data showed marginal reduction in the mole fraction of CO2 absorbed between fresh and recycled [TBA][C7] thus proving the promising potential of APILs as good liquid absorbents for CO2 removal.

Screening of Ionic Liquids against Bamboo Mildew and Its Inhibition Mechanism

Ionic liquids are a class of organic molten salts that consist entirely of cations and anions. They are characterized by their low vapor pressure, low viscosity, low toxicity, high thermal stability, and strong antifungal potential. In this study, the inhibitory performance of ionic liquid cations against Penicillium citrinum, Trichoderma viride, and Aspergillus niger was investigated, along with the mechanism of cell membrane disruption. The Oxford cup method, SEM, and TEM were employed to examine the extent of damage and the specific site of action of ionic liquids on the mycelium and cell structure of these fungi. The results showed that 1-decyl-3-methylimidazole had a strong inhibitory effect on TV; benzyldimethyldodecylammonium chloride had a weak inhibitory effect on PC, TV, AN, and a mixed culture; while dodecylpyridinium chloride exhibited significant inhibitory effects on PC, TV, AN, and Mix, with more prominent effects observed on AN and Mix, exhibiting MIC values of 5.37 mg/mL, 5.05 mg/mL, 5.10 mg/mL, and 5.23 mg/mL, respectively. The mycelium of the mildews showed drying, partial loss, distortion, and uneven thickness. The cell structure showed separation of the plasma wall. The absorbance of the extracellular fluid of PC and TV reached the maximum after 30 min, while that of AN reached the maximum after 60 min. The pH of the extracellular fluid decreased initially and then increased within 60 min, followed by a continuous decrease. These findings provide important insights for the application of ionic liquid antifungal agents in bamboo, medicine, and food.

Lignosulfonate-Based Ionic Liquids as Asphaltene Dispersants

Asphaltenes are recognized as being troublesome from upstream to downstream in the oil industry due to their tendency to precipitate and self-associate. Their extraction from asphaltenic crude oil for a cost-effective refining process is a crucial and critical challenge in the oil and gas sector. Lignosulfonate (LS), as a by-product of the wood pulping process in the papermaking industry, is a highly available and underutilized feedstock. This study aimed to synthesize novel LS-based ionic liquids (ILs) by reacting lignosulfonate acid sodium salt [Na]₂[LS] with different alkyl chains of piperidinium chloride for asphaltene dispersion. The synthesized ILs, 1-hexyl-1-methyl-piperidinium lignosulfonate [C₆C₁Pip]₂[LS], 1-octyl-1-methyl-piperidinium lignosulfonate [C₈C₁Pip]₂[LS], 1-dodecyl-1-methyl-piperidinium lignosulfonate [C₁₂C₁Pip]₂[LS] and 1-hexadecyl-1-methyl-piperidinium lignosulfonate [C₁₆C₁Pip]₂[LS] were characterized using FTIR-ATR and ¹H NMR for functional groups and structural confirmation. The ILs depicted high thermal stability because of the presence of a long side alkyl chain and piperidinium cation following thermogravimetric analysis (TGA). Asphaltene dispersion indices (%) of ILs were tested by varying contact time, temperature and ILs concentration. The obtained indices were high for all ILs, with a dispersion index of more than 91.2% [C₁₆C₁Pip]₂[LS], representing the highest dispersion at 50,000 ppm. It was able to lower asphaltene particle size diameter from 51 nm to 11 nm. The kinetic data of [C₁₆C₁Pip]₂[LS] were consistent with the pseudo-second-order kinetic model. The dispersion index (%), asphaltene particle growth and the kinetic model agreed with the molecular modeling studies of the HOMO-LUMO energy of IL holds.

Application of functional metal anionic Lewis acid ionic liquids in the alkylation of chlorobenzene/SOCl2

4,4'-Dichlorodiphenyl sulfoxide is the main raw material for the manufacture of polysulfone, polyether sulfone and other engineering plastics. It is also an intermediate for medicines, dyes and pesticides, which has been widely utilized in engineering plastics, fine chemicals and other fields. The alkylation of chlorobenzene with thionyl chloride can give 4,4'-dichlorodiphenyl sulfoxide as a product using Lewis acidic ionic liquids. In this work, metal-based methylimidazolium ionic liquids were synthesized, which were found to be efficient catalysts for alkylation reactions. The molar ratio of different metal chlorides to 1-butyl-3-methyl imidazole chloride and the influence of different metal chlorine additives on the catalytic Lewis acid center were investigated. The fissionable species of AlCl₃ in ionic liquids will enhance the acidity of ionic liquids and, thus, promote the catalytic performance of ionic liquids. Under the optimized reaction conditions, the conversion rate of excess chlorobenzene was 45.3% and the selectivity of 4,4'-dichlorodiphenyl sulfoxide was 31.9%.

Solvation Shell Structures of Ammonia in Reline and Ethaline Deep Eutectic Solvents

Because of increasing atmospheric anthropogenic ammonia (NH₃) emission, researchers are devising new techniques to capture NH₃. Deep eutectic solvents (DESs) are found as potential media for NH₃ mitigation. In the present study, we have carried out ab initio molecular dynamics (AIMD) simulations to decipher the solvation shell structures of an ammonia solute in reline (1:2 mixture of choline chloride and urea) and ethaline (1:2 mixture of choline chloride and ethylene glycol) DESs. We aim to resolve the fundamental interactions which help stabilize NH₃ in these DESs, focusing on the structural arrangement of the DES species in the nearest solvation shell around NH₃ solute. In reline, the hydrogen atoms of NH₃ are preferentially solvated by chloride anions and the carbonyl oxygen atoms of urea. The nitrogen atom of NH₃ renders hydrogen bonding with hydroxyl hydrogen of the choline cation. The positively charged head groups of the choline cations prefer to stay away from NH₃ solute. In ethaline, strong hydrogen bonding interaction exists between the nitrogen atom of NH₃ and hydroxyl hydrogen atoms of ethylene glycol. The hydrogen atoms of NH₃ are found to be solvated by hydroxyl oxygen atoms of ethylene glycol and choline cation. While ethylene glycol molecules play a crucial role in solvating NH₃, the chloride anions remain passive in deciding the first solvation shell. In both the DESs, choline cations approach NH₃ from their hydroxyl group side. We observe slightly stronger solute-solvent charge transfer and hydrogen bonding interaction in ethaline than those in reline.

Investigation of Molecular Mechanism of Cobalt Porphyrin Catalyzed CO2 Electrochemical Reduction in Ionic Liquid by In-Situ SERS

This study explores the electrochemical reduction in CO₂ using room temperature ionic liquids as solvents or electrolytes, which can minimize the environmental impact of CO₂ emissions. To design effective CO₂ electrochemical systems, it is crucial to identify intermediate surface species and reaction products in situ. The study investigates the electrochemical reduction in CO₂ using a cobalt porphyrin molecular immobilized electrode in 1-n-butyl-3-methyl imidazolium tetrafluoroborate (BMI.BF4) room temperature ionic liquids, through in-situ surface-enhanced Raman spectroscopy (SERS) and electrochemical technique. The results show that the highest faradaic efficiency of CO produced from the electrochemical reduction in CO₂ can reach 98%. With the potential getting more negative, the faradaic efficiency of CO decreases while H₂ is produced as a competitive product. Besides, water protonates porphyrin macrocycle, producing pholorin as the key intermediate for the hydrogen evolution reaction, leading to the out-of-plane mode of the porphyrin molecule. Absorption of CO₂ by the ionic liquids leads to the formation of BMI·CO₂ adduct in BMI·BF₄ solution, causing vibration modes at 1100, 1457, and 1509 cm^-1. However, the key intermediate of CO2-· radical is not observed. The υ(CO) stretching mode of absorbed CO is affected by the electrochemical Stark effect, typical of CO chemisorbed on a top site.

Ionogels: recent advances in design, material properties and emerging biomedical applications

Ionic liquid (IL)-based gels (ionogels) have received considerable attention due to their unique advantages in ionic conductivity and their biphasic liquid-solid phase property. In ionogels, the negligibly volatile ionic liquid is retained in the interconnected 3D pore structure. On the basis of these physical features as well as the chemical properties of well-chosen ILs, there is emerging interest in the anti-bacterial and biocompatibility aspects. In this review, the recent achievements of ionogels for biomedical applications are summarized and discussed. Following a brief introduction of the various types of ILs and their key physicochemical and biological properties, the design strategies and fabrication methods of ionogels are presented by means of different confining networks. These sophisticated ionogels with diverse functions, aimed at biomedical applications, are further classified into several active domains, including wearable strain sensors, therapeutic delivery systems, wound healing and biochemical detections. Finally, the challenges and possible strategies for the design of future ionogels by integrating materials science with a biological interface are proposed.

Temperature Responsive Copolymers Films of Polyether and Bio-Based Polyamide Loaded with Imidazolium Ionic Liquids for Smart Packaging Applications

Temperature-responsive materials are highly interesting for temperature-triggered applications such as drug delivery and smart packaging. Imidazolium Ionic Liquids (ILs), with a long side chain on the cation and a melting temperature of around 50 °C, were synthetized and loaded at moderate amounts (up to 20 wt%) within copolymers of polyether and a bio-based polyamide via solution casting. The resulting films were analyzed to assess their structural and thermal properties, and the gas permeation changes due to their temperature-responsive behavior. The splitting of FT-IR signals is evident, and, in the thermal analysis, a shift in the glass transition temperature (Tg) for the soft block in the host matrix towards higher values upon the addition of both ILs is also observed. The composite films show a temperature-dependent permeation with a step change corresponding to the solid-liquid phase change in the ILs. Thus, the prepared polymer gel/ILs composite membranes provide the possibility of modulating the transport properties of the polymer matrix simply by playing with temperature. The permeation of all the investigated gases obeys an Arrhenius-type law. A specific permeation behavior, depending on the heating-cooling cycle sequence, can be observed for carbon dioxide. The obtained results indicate the potential interest of the developed nanocomposites as CO₂ valves for smart packaging applications.

Study of Lithium-Extraction Systems Based on Benzo-15-Crown-5 Ether and Alkylimidazolium-Based Ionic Liquid

The extraction of lithium from aqueous solutions of LiNTf₂ and LiCl salts using benzo-15-crown-5 ether (B15C5) as an extractant in [C8mim][NTf₂] ionic liquid was studied. The transition of the extractant into the aqueous phase and the distribution of Cl^- ions during lithium extraction from LiCl solutions were determined. LiNTf₂ complexes with B15C5 with different LiNTf₂:B15C5 ratios were isolated for the first time and characterized via X-ray diffraction and IR spectroscopy. Differences in the extraction process of LiCl and LiNTf₂ were determined via an infrared spectroscopic study of the extraction systems.

Breakthrough of lignin valorization: A novel alcohol-dichoromethane binary mixture solvent for lignin dissolution with excellent properties

A novel binary solvent system consisting of alcohols (e.g., methanol, ethanol, isopropanol) and dichloromethane was developed as an efficient dissolution system for dissolving various types of lignin. It was found that in this dissolution system, adjusting the volume ratio of alcohol and dichloromethane will significantly affect the solubility of lignin. At the same time, this study proposed that the reason why the solvent can dissolve lignin was the hydrophobic skeleton and hydrophilic groups can be solvated by dichloromethane and alcohols respectively, which significantly promoted the dissolution of lignin. Furthermore, the solvent did not significantly alter the structure of the lignin. The proposed novel solvent is simple, efficient, versatile and flexible, can adapt to the high diversity of lignin, and has broad application prospects.