New Hydrogels Based on Substituted Anhydride Modified Collagen and 2-Hydroxyethyl Methacrylate. Synthesis and Characterization

Exploration of Optimal Reaction Conditions for Constructing Hydrophobic Polymers with Low Deformation to Facilitate the Dimensional Stability of Laminated Bamboo Lumber

The environmental moisture changes would result in the deformation and cracking of laminated bamboo lumber (LBL) easily due to the unreleased internal stress, leading to poor durability. In this study, a hydrophobic cross-linking polymer with low deformation was successfully fabricated and introduced in the LBL by polymerization and esterification to improve its dimensional stability. In an aqueous solution, the 2-hydroxyethyl methacrylate (HEMA) and Maleic anhydride (MAh) were employed as the base compounds for synthesizing the copolymer of 2-hydroxyethyl methacrylate and maleic acid (PHM). The hydrophobicity and swelling performance of the PHM was adjusted by controlling the reaction temperatures. PHM-modified LBL's hydrophobicity as indicated by the contact angle, increased from 58.5° to 115.2°. The anti-swelling efficiency was also improved. Moreover, multiple characterizations were applied to clarify the structure of PHM and its bonding linkages in LBL. This study demonstrates an efficient avenue to facilitate the dimensional stability of LBL by PHM modification and sheds new light on the efficient utilization of LBL using a hydrophobic polymer with low deformation.

Dynamic modulation and epoxy functionalization of protein-mediated enoate ester-based hybrid cryogels

The current work is focused on the preparation of protein-mediated poly(hydroxyethyl methacrylate-co-glycidyl methacrylate) copolymer as a self-template for in situ synthesis of hybrid gels. Gelatin, collagen, biotin, and l-arginine were used to create hybrid materials with adjustable swelling and elastic properties. Hybrid cryogels tended to swell more than hybrid hydrogels due to their porous nature. Collaged-doped cryogels had the highest swelling, whereas gelatin-doped hybrids showed enhanced elastic modulus. All hybrid gels exhibited pH-sensitive swelling to controlled release applications depending on the degree of protonation of NH₂ and COOH groups in the side chains. At low pH conditions, hybrid cryogels exhibited a higher swelling tendency compared to hydrogels. Ion-stimulus-response of hybrid gels was studied to evaluate the effect of salt concentration and features of ambient ions on swelling. Depending on the polyelectrolytic or polyampholytic nature, the extent of swelling in NaCl and KCl solutions varied according to the charge distribution in the network chains. Hybrid gels showed excellent adsorption performance for methyl orange by the presence of epoxy, hydroxyl groups, amino and carboxyl groups providing sufficient active sites. Adsorption capacity of hybrid cryogels is higher than that of hydrogels. The removal rate 97/%, reached an equilibrium state in a short period, suggested that collagen-doped hybrid cryogels have a potential application to remove dyestuff from wastewater. In relation to the decrease of methyl orange concentration in solution, adsorption process followed pseudo-second-order kinetic model. Avrami model has provided a better experimental-calculated fit and adsorption thermodynamics analysis indicated that the adsorption was a spontaneous process with a negative standard free energy. The characteristic findings from this research will provide insights into the design and application of enoate-ester and protein-based combinations in the food, biomedical and cosmetic fields.

Multi-responsive mesoporous polydopamine composite nanorods cooperate with nano-enzyme and photosensitizer for intensive immunotherapy of bladder cancer

Bladder cancer is a common malignancy in the urinary system. Defects of drug molecules in bladder during treatment, such as passive diffusion, rapid clearance of periodic urination, poor adhesion and permeation abilities, lead to low delivery efficiency of conventional drugs and high recurrence rate of disease. In this study, we designed multi-responsive mesoporous polydopamine (PDA) composite nanorods cooperating with nano-enzyme and photosensitizer for intensive immunotherapy of bladder cancer. The strongly adhesive mesoporous PDA with wheat germ agglutinin on nanoparticles could specifically adhere to epithelial glycocalyx and made the nanoparticles aggregate in urinary pathways. Meanwhile, 2,3-dimethylmaleic anhydride could be hydrolyzed in acidic conditions of tumor microenvironment, giving it a positive charge (charge reversal), which is more amenable to enter cancer cells. Afterwards, manganese dioxide nanorods could catalyze the reaction of excess H₂ O₂ in tumor microenvironment to generate active oxygen, so as to change the hypoxic environment in tumor, and achieve a pH-responsive for slow release of PD-L1. After the ICG was irradiated by infrared light, a large amount of singlet oxygen was generated, thereby enhancing the therapeutic effect and reducing toxicity in vivo. Besides, mesoporous PDA with indocyanine green photothermal agent could have a local heat up quickly under the near-infrared light to kill cancer cells, thereby enhancing therapeutic efficacy. Accordingly, this mesoporous PDA composite nanorods shed a light on bladder tumor treatment.

Synthesis and characterization of stimuli-responsive hydrogels: evaluation of external stimuli influence on L929 fibroblast viability

In this study, poly(2-hydroxyethyl methacrylate) [p(HEMA)] based hydrogels responsive to the pH, temperature and magnetic field were synthesized. The surface properties of p(HEMA) were improved by designing the stimuli-responsive hydrogels made of MAGA, NIPAAm and methacrylate-decorated magnetite nanoparticles as a function of pH-, thermo- and magnetic responsive cell culture surfaces. These materials were then modified an abundant extracellular matrix component, type I collagen, which has been considered as a biorecognition element to increase the applicability of hydrogels to cell viability. Based on results from scanning electron microscopy (SEM) and thermal gravimetric analysis (TGA), stimuli-responsive hydrogel demonstrated improved non-porous structures and thermal stability with a high degree of cross-linking. Mechanical analyses of the hydrogels also showed that stimuli-responsive hydrogels are more elastomeric due to the polymeric chains and heterogeneous amorphous segments compared to plain hydrogels. Furthermore, surface modification of hydrogels with collagen provided better biocompatibility, which was confirmed with L929 fibroblast cell adhesion. Produced stimuli-responsive hydrogels modulated cellular viability by changing pH and magnetic field.

Conventional and Recent Trends of Scaffolds Fabrication: A Superior Mode for Tissue Engineering

Tissue regeneration is an auto-healing mechanism, initiating immediately following tissue damage to restore normal tissue structure and function. This falls in line with survival instinct being the most dominant instinct for any living organism. Nevertheless, the process is slow and not feasible in all tissues, which led to the emergence of tissue engineering (TE). TE aims at replacing damaged tissues with new ones. To do so, either new tissue is being cultured in vitro and then implanted, or stimulants are implanted into the target site to enhance endogenous tissue formation. Whichever approach is used, a matrix is used to support tissue growth, known as ‘scaffold’. In this review, an overall look at scaffolds fabrication is discussed, starting with design considerations and different biomaterials used. Following, highlights of conventional and advanced fabrication techniques are attentively presented. The future of scaffolds in TE is ever promising, with the likes of nanotechnology being investigated for scaffold integration. The constant evolvement of organoids and biofluidics with the eventual inclusion of organ-on-a-chip in TE has shown a promising prospect of what the technology might lead to. Perhaps the closest technology to market is 4D scaffolds following the successful implementation of 4D printing in other fields.

Conventional and Recent Trends of Scaffolds Fabrication: A Superior Mode for Tissue Engineering

Tissue regeneration is an auto-healing mechanism, initiating immediately following tissue damage to restore normal tissue structure and function. This falls in line with survival instinct being the most dominant instinct for any living organism. Nevertheless, the process is slow and not feasible in all tissues, which led to the emergence of tissue engineering (TE). TE aims at replacing damaged tissues with new ones. To do so, either new tissue is being cultured in vitro and then implanted, or stimulants are implanted into the target site to enhance endogenous tissue formation. Whichever approach is used, a matrix is used to support tissue growth, known as ‘scaffold’. In this review, an overall look at scaffolds fabrication is discussed, starting with design considerations and different biomaterials used. Following, highlights of conventional and advanced fabrication techniques are attentively presented. The future of scaffolds in TE is ever promising, with the likes of nanotechnology being investigated for scaffold integration. The constant evolvement of organoids and biofluidics with the eventual inclusion of organ-on-a-chip in TE has shown a promising prospect of what the technology might lead to. Perhaps the closest technology to market is 4D scaffolds following the successful implementation of 4D printing in other fields.

Collagen Bioinks for Bioprinting: A Systematic Review of Hydrogel Properties, Bioprinting Parameters, Protocols, and Bioprinted Structure Characteristics

Bioprinting is a modern tool suitable for creating cell scaffolds and tissue or organ carriers from polymers that mimic tissue properties and create a natural environment for cell development. A wide range of polymers, both natural and synthetic, are used, including extracellular matrix and collagen-based polymers. Bioprinting technologies, based on syringe deposition or laser technologies, are optimal tools for creating precise constructs precisely from the combination of collagen hydrogel and cells. This review describes the different stages of bioprinting, from the extraction of collagen hydrogels and bioink preparation, over the parameters of the printing itself, to the final testing of the constructs. This study mainly focuses on the use of physically crosslinked high-concentrated collagen hydrogels, which represents the optimal way to create a biocompatible 3D construct with sufficient stiffness. The cell viability in these gels is mainly influenced by the composition of the bioink and the parameters of the bioprinting process itself (temperature, pressure, cell density, etc.). In addition, a detailed table is included that lists the bioprinting parameters and composition of custom bioinks from current studies focusing on printing collagen gels without the addition of other polymers. Last but not least, our work also tries to refute the often-mentioned fact that highly concentrated collagen hydrogel is not suitable for 3D bioprinting and cell growth and development.

Cancer Cell Direct Bioprinting: A Focused Review

Three-dimensional printing technologies allow for the fabrication of complex parts with accurate geometry and less production time. When applied to biomedical applications, two different approaches, known as direct or indirect bioprinting, may be performed. The classical way is to print a support structure, the scaffold, and then culture the cells. Due to the low efficiency of this method, direct bioprinting has been proposed, with or without the use of scaffolds. Scaffolds are the most common technology to culture cells, but bioassembly of cells may be an interesting methodology to mimic the native microenvironment, the extracellular matrix, where the cells interact between themselves. The purpose of this review is to give an updated report about the materials, the bioprinting technologies, and the cells used in cancer research for breast, brain, lung, liver, reproductive, gastric, skin, and bladder associated cancers, to help the development of possible treatments to lower the mortality rates, increasing the effectiveness of guided therapies. This work introduces direct bioprinting to be considered as a key factor above the main tissue engineering technologies.

A Comparative Review of Natural and Synthetic Biopolymer Composite Scaffolds

Tissue engineering (TE) and regenerative medicine integrate information and technology from various fields to restore/replace tissues and damaged organs for medical treatments. To achieve this, scaffolds act as delivery vectors or as cellular systems for drugs and cells; thereby, cellular material is able to colonize host cells sufficiently to meet up the requirements of regeneration and repair. This process is multi-stage and requires the development of various components to create the desired neo-tissue or organ. In several current TE strategies, biomaterials are essential components. While several polymers are established for their use as biomaterials, careful consideration of the cellular environment and interactions needed is required in selecting a polymer for a given application. Depending on this, scaffold materials can be of natural or synthetic origin, degradable or nondegradable. In this review, an overview of various natural and synthetic polymers and their possible composite scaffolds with their physicochemical properties including biocompatibility, biodegradability, morphology, mechanical strength, pore size, and porosity are discussed. The scaffolds fabrication techniques and a few commercially available biopolymers are also tabulated.

New Developments in Medical Applications of Hybrid Hydrogels Containing Natural Polymers

New trends in biomedical applications of the hybrid polymeric hydrogels, obtained by combining natural polymers with synthetic ones, have been reviewed. Homopolysaccharides, heteropolysaccharides, as well as polypeptides, proteins and nucleic acids, are presented from the point of view of their ability to form hydrogels with synthetic polymers, the preparation procedures for polymeric organic hybrid hydrogels, general physico-chemical properties and main biomedical applications (i.e., tissue engineering, wound dressing, drug delivery, etc.).

Biopolymer nanofibrils: structure, modeling, preparation, and applications

Biopolymer nanofibrils exhibit exceptional mechanical properties with a unique combination of strength and toughness, while also presenting biological functions that interact with the surrounding environment. These features of biopolymer nanofibrils profit from their hierarchical structures that spun angstrom to hundreds of nanometer scales. To maintain these unique structural features and to directly utilize these natural supramolecular assemblies, a variety of new methods have been developed to produce biopolymer nanofibrils. In particular, cellulose nanofibrils (CNFs), chitin nanofibrils (ChNFs), silk nanofibrils (SNFs) and collagen nanofibrils (CoNFs), as the four most abundant biopolymer nanofibrils on earth, have been the focus of research in recent years due to their renewable features, wide availability, low-cost, biocompatibility, and biodegradability. A series of top-down and bottom-up strategies have been accessed to exfoliate and regenerate these nanofibrils for versatile advanced applications. In this review, we first summarize the structures of biopolymer nanofibrils in nature and outline their related computational models with the aim of disclosing fundamental structure-property relationships in biological materials. Then, we discuss the underlying methods used for the preparation of CNFs, ChNFs, SNF and CoNFs, and discuss emerging applications for these biopolymer nanofibrils.

pH-Responsive 2-hydroxyethyl methacrylate/citraconic anhydride–modified collagen hydrogels as ciprofloxacin carriers for wound dressings

pH-Sensitive hydrogels of 2-hydroxyethyl methacrylate/citraconic anhydride–modified collagen were obtained by free radical copolymerization/crosslinking in the presence of ammonium persulfate/ N,N,N′, N′-tetramethylethylenediamine redox initiator system. Their pH-responsiveness was demonstrated by swelling behavior and ciprofloxacin release tests. Both unloaded and loaded hydrogels were characterized by Fourier transform infrared, scanning electron microscopy, and biocompatibility tests. The enzymatic degradation in the presence of Clostridium histolyticum mainly depends on initiator content. In vivo biocompatibility tests involving intraperitoneal hydrogels’ implantation in rats following the analysis by the granuloma test, leukocyte formula, immune parameters, and hepatic transaminases demonstrated their non-toxicity and biocompatibility with living tissues. The in vitro antimicrobial activity, in vivo biocompatibility, and in vitro biodegradability tests attest the possibility to use these new polymeric hydrogels with tailored properties as matrices for bioactive products in medical and pharmaceutical applications as wound care and targeting drug delivery systems. The ciprofloxacin release studies proved their potential as materials for wound dressings.

Complex poly(lactic acid)-based biomaterial for urinary catheters: I. Influence of AgNP on properties

The present study focused on the development of biocompatible antimicrobial/antioxidant biodegradable bionanocomposite renewable resources based on poly(lactic acid) (PLA) plasticised with epoxidised soybean oil. To the main PLA matrix hydrolysed collagen (HC) (to enhance biocompatibility), vitamin E (as antioxidant agent) and silver (Ag) nanoparticles (NPs) (for imparting antimicrobial properties for medical applications and also for active packaging) were incorporated. The blends were produced by using the classical technological flow of melt processing. The presence of the additives in the PLA matrix improved the processability and flexibility and slightly decreased the thermal properties. The specific interactions of silver NPs with the other components of nanocomposites, mainly with HC protein and vitamin E (by ionic and other types of secondary bonds), led to a better HC and vitamin E dispersion in the samples with a higher silver content (1·5%), which further caused the enhancement of the mechanical properties for high silver NP concentration. Therefore, the silver NPs were successfully embedded into the polymer matrix. The aim of this research was to improve the flexibility, biocompatibility and functionality of PLA and to obtain bionanocomposites destined for medical applications such as catheters. This first part of research deals with mechanical and thermal characterisation correlated with morphological features.

Poly(vinyl alcohol)/chitosan/montmorillonite nanocomposites for food packaging applications

Poly(vinyl alcohol) (PVA)/chitosan (CS)/montmorillonite (C30B) materials for food packaging applications were prepared by using a noninvasive and low-cost freeze/thawing method. Cloisite 30B nanoclay content in PVA/CS gels was varied in order to establish optimum amount to obtain improved properties. The structural, morphological, rheological aspects, thermal stability, and antimicrobial activity were investigated using various techniques as Fourier transform infrared, scanning electron microscopy, rheology, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical thermal analysis, and antibacterial tests. It was noticed that the obtained materials show an intercalated structure with specific interactions between components and nanoclay incorporation led to an increased thermal stability, mechanical properties, and excellent antimicrobial activity against Escherichia coli, Listeria monocytogenes, and Salmonella typhimurium due to synergistic action of CS and nanoclay.

Synthesis of a graft-copolymer adsorbent through a green route and studies on its interactions with chromium(iii) through active functional groups: kinetics and improved adsorption supported by SEM-EDX and AFM

A novel adsorbent for enhanced absorption of chromium(iii).