Conductive Polymer/Graphene Supported Platinum Nanoparticles as Anode Catalysts for the Extended Power Generation of Microbial Fuel Cells

Co-Fe-N@biochar anode for improvment the electricity generation performance of microbial fuel cell

Microbial fuel cells (MFCs) can generate energy while processing organic pollutants, which has a great impact on environmental wastewater treatment applications. In this study, a gel polymer was formed by Co-Fe-N co-doping biochar (Co-Fe-N@BC), which was used as the anode material to improve the electricity generation performance of MFC. The Co-Fe-N@BC material prepared at 900℃ carbonised biomass into more graphitic carbon, and its total resistance (3.56 Ω) was significantly reduced. In the corresponding dual-chamber MFC, the current density was 2.81 A/m2, and the power density reached 1181 mW/m2 at maximum. Among the materials tested, the Co-Fe-N@BC anode MFC had the highest chemical oxygen demand removal rate and coulombic efficiency, reaching 91% and 13%, respectively. It is proved that MFC with Co-Fe-N@BC anode has the best electrochemical performance.

Preparation of AuNP-CQD/PDA/GO anode for MFC and its treatment of oily sewage from ships

Oily sewage discharged from ships has brought many harms to the marine environment, even endangered marine life and human life. As a new type of water treatment technology, microbial fuel cell (MFC) can efficiently treat pollutants and recover energy, which can be converted into electric energy. However, its large internal resistance restricts its development. In order to solve the problems of low power generation performance and poor biocompatibility of microbial fuel cell, a gold nanoparticle-carbon quantum dot/polydopamine/graphene oxide/bacterial cellulose (AuNP-CQD/PDA/GO/BC) electrode was prepared, and it was applied to the treatment of oily sewage from ships. Fourier transforms infrared spectroscopy, X-ray diffraction, scanning electron microscopy, gas chromatography-mass spectrometry, and contact angle measuring instrument were used to characterize the electrode. The results show that PDA bridges GO and AuNP-CQD particles through the electrostatic interaction/π-π bond/hydrogen bonding, respectively. This attracts a large number of microorganisms to attach to the surface of the porous anode material, which greatly improves the activity and quantity of microorganisms. Moreover, the maximum power density of AuNP-CQD/PDA/GO/BC electrode is 2624.91 mW/m², which obviously improves the electrochemical performance of MFC. The oil content of the treated water is ≤ 15 mg/L, reaching the discharge of MARPOL 73/78 convention. Therefore, the proposed approach has paved new dimensions in not only the preparation of a new composite electrode materials but also its applications as effective degradation of ship oily sewage in MFC.

Fabrication and characterization of Ti/polyaniline-Co/PbO2-Co for efficient electrochemical degradation of cephalexin in secondary effluents

The traditional interlayer of PbO₂ electrode possessed many problems, such as short service lifetime and limited specific surface area. Herein, a novel and efficient Ti/polyaniline-Co/PbO₂-Co electrode was conctructed employing cyclic voltammetry to introduce a Co-doped polyaniline interlayer and anodic electrodeposition to synthetize a β-PbO₂-Co active layer. Compared with pristine PbO₂ electrode, Ti/polyaniline-Co/PbO₂-Co exhibited more compact crystalline shape and higher active sites amounts. Pratically, the electrochemical degradation of 5 mg L^-1 cephalexin in real secondary effluents was effectively achieved by the novel anode with 87.42% cephalexin removal and 71.8% COD mineralization after 120 min of 15 mA cm^-2 electrolysis. The hydroxyl radical production and electrochemical stability were increased by 3.16 and 3.27 times respectively. The cephalexin degradation pathway was investigated by combining a density functional theory-based theoretical approach and LC-QTrap-MS/MS. The most likely cleavage point of the β-lactam ring was the O=C-N bond, whose attack would produce small molecular compounds containing the thiazole and 4, 6-thiazine rings. Further oxidation produced inorganic ions; quantitative investigations indicated the amino groups to undergo decomposition to form aqueous NH₄⁺, which was further oxidized to NO₃^-. The accumulation of NO₃^- and SO₄^2-, combined with a decrease in toxicity toward Escherichia coli, demonstrated the efficient mineralization of cephalexin on the Ti/polyaniline-Co/PbO₂-Co electrode.

Utilizing Biomass-Based Graphene Oxide-Polyaniline-Ag Electrodes in Microbial Fuel Cells to Boost Energy Generation and Heavy Metal Removal

Although regarded as environmentally stable, bioelectrochemical fuel cells or, microbial fuel cells (MFCs) continue to face challenges with sustaining electron transport. In response, we examined the performance of two graphene composite-based anode electrodes—graphene oxide (GO) and GO–polymer–metal oxide (GO–PANI–Ag)—prepared from biomass and used in MFCs. Over 7 days of operation, GO energy efficiency peaked at 1.022 mW/m² and GO–PANI–Ag at 2.09 mW/m². We also tested how well the MFCs could remove heavy metal ions from synthetic wastewater, a secondary application of MFCs that offers considerable benefits. Overall, GO–PANI–Ag had a higher removal rate than GO, with 78.10% removal of Pb(II) and 80.25% removal of Cd(II). Material characterizations, electrochemical testing, and microbial testing conducted to validate the anodes performance confirmed that using new materials as electrodes in MFCs can be an attractive approach to improve the electron transportation. When used with a natural organic substrate (e.g., sugar cane juice), they also present fewer challenges. We also optimized different parameters to confirm the efficiency of the MFCs under various operating conditions. Considering those results, we discuss some lingering challenges and potential possibilities for MFCs.

A review of recent advances in electrode materials for emerging bioelectrochemical systems: From biofilm-bearing anodes to specialized cathodes

Bioelectrochemical systems (BES), mainly microbial fuel cells (MEC) and microbial electrolysis cells (MFC), are unique biosystems that use electroactive bacteria (EAB) to produce electrons in the form of electric energy for different applications. BES have attracted increasing attention as a sustainable, low-cost, and neutral-carbon option for energy production, wastewater treatment, and biosynthesis. Complex interactions between EAB and the electrode materials play a crucial role in system performance and scalability. The electron transfer processes from the EAB to the anode surface or from the cathode surface to the EAB have been the object of numerous investigations in BES, and the development of new materials to maximize energy production and overall performance has been a hot topic in the last years. The present review paper discusses the advances on innovative electrode materials for emerging BES, which include MEC coupled to anaerobic digestion (MEC-AD), Microbial Desalination Cells (MDC), plant-MFC (P-MFC), constructed wetlands-MFC (CW-MFC), and microbial electro-Fenton (BEF). Detailed insights on innovative electrode modification strategies to improve the electrode transfer kinetics on each emerging BES are provided. The effect of materials on microbial population is also discussed in this review. Furthermore, the challenges and opportunities for materials scientists and engineers working in BES are presented at the end of this work aiming at scaling up and industrialization of such versatile systems.

Current Progress of Interfacing Organic Semiconducting Materials with Bacteria

Microbial bioelectronics require interfacing microorganisms with electrodes. The resulting abiotic/biotic platforms provide the basis of a range of technologies, including energy conversion and diagnostic assays. Organic semiconductors (OSCs) provide a unique strategy to modulate the interfaces between microbial systems and external electrodes, thereby improving the performance of these incipient technologies. In this review, we explore recent progress in the field on how OSCs, and related materials capable of charge transport, are being used within the context of microbial systems, and more specifically bacteria. We begin by examining the electrochemical communication modes in bacteria and the biological basis for charge transport. Different types of synthetic organic materials that have been designed and synthesized for interfacing and interrogating bacteria are discussed next, followed by the most commonly used characterization techniques for evaluating transport in microbial, synthetic, and hybrid systems. A range of applications is subsequently examined, including biological sensors and energy conversion systems. The review concludes by summarizing what has been accomplished so far and suggests future design approaches for OSC bioelectronics materials and technologies that hybridize characteristic properties of microbial and OSC systems.

Improving the anode performance of microbial fuel cell with carbon nanotubes supported cobalt phosphate catalyst

Microbial fuel cell (MFC) is a sustainable technology that can convert waste to energy by harnessing the power of exoelectrogenic bacteria. However, the poor biocompatibility and low electrocatalytic activities of surface usually cause weak bacterial adhesion and low electron transfer efficiency, which seriously hampers the development of MFCs. Herein, a novel carbon nanotube supported cobalt phosphate (CNT/Co-Pi) electrode is fabricated by assembling CNTs on carbon cloth, followed by the electrodeposition of Co-Pi catalyst. The deposited amorphous Co-Pi thin film contains phosphate and the cobalt ions of multiple oxidation states. The hydrophilic phosphate can promote the adhesion of microorganisms on electrode. The strong conversion ability of multiple states of cobalt offers excellent electrocatalytic activity for the electron transfer across biotic/abiotic interface. Therefore, the highly conductive CNTs substrate, along with the Co-Pi catalyst, provide an effective electron transfer between the electrogenic bacteria and the electrode, which endows MFC high power densities up to 1200 mW m^-2. Our work has demonstrated for the first time that CNT/Co-Pi catalyst can promote the interfacial electron transfer between electrogenic bacteria and electrode, and highlighted the application potentials of Co-Pi as an anode catalyst for the fabrication of high performance MFC anodes.

Modern Nanocomposites and Hybrids as Electrode Materials Used in Energy Carriers

Over the past decades, the application of new hybrid materials in energy storage systems has seen significant development. The efforts have been made to improve electrochemical performance, cyclic stability, and cell life. To achieve this, attempts have been made to modify existing electrode materials. This was achieved by using nano-scale materials. A reduction of size enabled an obtainment of changes of conductivity, efficient energy storage and/or conversion (better kinetics), emergence of superparamagnetism, and the enhancement of optical properties, resulting in better electrochemical performance. The design of hybrid heterostructures enabled taking full advantage of each component, synergistic effect, and interaction between components, resulting in better cycle stability and conductivity. Nowadays, nanocomposite has ended up one of the foremost prevalent materials with potential applications in batteries, flexible cells, fuel cells, photovoltaic cells, and photocatalysis. The main goal of this review is to highlight a new progress of different hybrid materials, nanocomposites (also polymeric) used in lithium-ion (LIBs) and sodium-ion (NIBs) cells, solar cells, supercapacitors, and fuel cells and their electrochemical performance.

Cellulose Derived Graphene/Polyaniline Nanocomposite Anode for Energy Generation and Bioremediation of Toxic Metals via Benthic Microbial Fuel Cells

Benthic microbial fuel cells (BMFCs) are considered to be one of the eco-friendly bioelectrochemical cell approaches nowadays. The utilization of waste materials in BMFCs is to generate energy and concurrently bioremediate the toxic metals from synthetic wastewater, which is an ideal approach. The use of novel electrode material and natural organic waste material as substrates can minimize the present challenges of the BMFCs. The present study is focused on cellulosic derived graphene-polyaniline (GO-PANI) composite anode fabrication in order to improve the electron transfer rate. Several electrochemical and physicochemical techniques are used to characterize the performance of anodes in BMFCs. The maximum current density during polarization behavior was found to be 87.71 mA/m² in the presence of the GO-PANI anode with sweet potato as an organic substrate in BMFCs, while the GO-PANI offered 15.13 mA/m² current density under the close circuit conditions in the presence of 1000 Ω external resistance. The modified graphene anode showed four times higher performance than the unmodified anode. Similarly, the remediation efficiency of GO-PANI was 65.51% for Cd (II) and 60.33% for Pb (II), which is also higher than the unmodified graphene anode. Furthermore, multiple parameters (pH, temperature, organic substrate) were optimized to validate the efficiency of the fabricated anode in different environmental atmospheres via BMFCs. In order to ensure the practice of BMFCs at industrial level, some present challenges and future perspectives are also considered briefly.

Electrocatalytic reduction of oxygen at platinum nanoparticles dispersed on electrochemically reduced graphene oxide/PEDOT:PSS composites

Composites of commercially available graphene oxide (GO) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) with solvent additive ethylene glycol (EG) were investigated as an alternative support for Pt nanoparticles towards the electrocatalytic reduction of oxygen. The surface characteristics of the materials were examined using atomic force microscopy (AFM), X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and energy dispersive X-ray spectroscopy (EDS). Cyclic voltammetry (CV) and linear sweep voltammetry (LSV) at rotating disk electrodes (RDEs) and rotating ring-disk electrodes (RRDEs) were used to characterise the electrocatalytic activities of the composites materials. The structural and electrochemical studies reveal that the addition of EG favours the homogeneous distribution of Pt particles with reduced particle size and improves the electrocatalytic properties. A 30% and 16% increase in electrochemically active surface area (ECSA), a 1.2 and 1.1 fold increase in specific area activity (SA), and a 1.5 and 1.2 fold increase in mass activity (MA) were observed for 30% and 40% Pt loading on PEDOT:PSS after the addition of EG. A composite of rGO and PEDOT:PSS(EG) was investigated for different (w/w) ratios of PEDOT:PSS and rGO. The 1 : 2 w/w ratio showed an enhanced catalytic activity with high limiting current, more positive onset potential, higher SA and MA with lower H₂O₂ yield compared to PEDOT:PSS(EG) and rGO and previously reported values for PEDOT:PSS.

3D Flower-Like FeWO4/CeO2 Hierarchical Architectures on rGO for Durable and High-Performance Microalgae Biophotovoltaic Fuel Cells

A facile chemical reduction approach is adopted for the synthesis of iron tungstate (FeWO₄)/ceria (CeO₂)-decorated reduced graphene oxide (rGO) nanocomposite. Surface morphological studies of rGO/FeWO₄/CeO₂ composite reveal the formation of hierarchical FeWO₄ flower-like microstructures on rGO sheets, in which the CeO₂ nanoparticles are decorated over the FeWO₄ microstructures. The distinct anodic peaks observed for the cyclic voltammograms of studied electrodes under light/dark regimes validate the electroactive proteins present in the microalgae. With the cumulative endeavors of three-dimensional FeWO₄ microstructures, phase effect between rGO sheet and FeWO₄/CeO₂, highly exposed surface area, and light harvesting property of CeO₂ nanoparticles, the relevant rGO/FeWO₄/CeO₂ nanocomposite demonstrates high power and stable biophotovoltaic energy generation compared with those of previous reports. Thus, these findings construct a distinct horizon to tailor a ternary nanocomposite with high electrochemical activity for the construction of cost-efficient and environmentally benign fuel cells.

Isolated Effects of Surface Ligand Density on the Catalytic Activity and Selectivity of Palladium Nanoparticles

Alkanethiolate-capped palladium nanoparticles (PdNPs) have previously been synthesized by using a modified Brust-Schiffrin synthesis (using alkanethiosulfate instead of alkanethiol), in which the nanoparticle core size is established during alkanethiosulfate ligand passivation of the nanoparticle nucleation-growth initiated by borohydride reduction. Because of the dependence of core size on the amount of ligand present, surface ligand density decreases with increasing core size. Herein we present a method in which the core size is established independent of ligand addition, allowing the formation of PdNPs with similar core sizes yet different surface ligand densities. In this method, the core size is established during the temporary passivation of growing nanoparticles by borohydride and tetra-N-octylammonium bromide (TOAB), allowing nucleation to reach completion. Various molar equivalents of alkyl thiosulfate are then added, prompting the replacement of borohydride and TOAB and the formation of alkanethiolate-capped PdNPs. The resulting PdNPs were characterized by using ¹H NMR, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and inductively coupled plasma atomic emission spectroscopy (ICP-AES). The overall enhanced catalytic activity of hydrogenation/isomerization of alkenes and dienes was observed for PdNPs with a lower ligand density, proving the isolated effect of surface ligand density from other variations such as core size and shape. Surface ligand density is also shown to influence the hydrogenation/isomerization product selectivity of the catalytic reactions by regulating the formation of certain Pd-substrate intermediates and the kinetic diffusion of surface hydrogen/substrates.

In situ synthesis of polypyrrole on graphite felt as bio-anode to enhance the start-up performance of microbial fuel cells

This study introduces an effective method to deposit polypyrrole (PPy) on graphite felt (GF) as anode to improve the start-up performance of microbial fuel cells (MFCs). The results of scanning electron microscope (SEM) and electrochemical testing reveal that polypyrrole is able to improve the electrical conductivity and surface roughness, which is beneficial to the microorganism attachment and growth. It shows that microorganisms grow faster on polypyrrole-modified anode than on unmodified anode. It takes ca. 5 days for polypyrrole-modified anode to reach a reproducible voltage platform, while it takes 11 days for unmodified anode. Moreover, the maximum power density of microbial fuel cells with polypyrrole-modified anode was 919 mW m^-2, which were 2.3 times of that with unmodified anode. This research revealed that polypyrrole modification can improve the start-up performance of microbial fuel cells. It is considered as a feasible, economical and sustainable anode.

A 3D porous NCNT sponge anode modified with chitosan and Polyaniline for high-performance microbial fuel cell

A microbial fuel cell (MFC) is a potential bio-electrochemical technology that utilizes microorganisms to convert chemical energy into electrical energy. The low power output of MFCs remain the bottleneck for their practical applications. In this paper, a novel, biocompatible and bioelectrocatalytic composite chitosan-nitrogen doped carbon nanotubes-polyaniline (CS-NCNT-PANI) was prepared in situ on the 3D porous NCNT/sponge and applied to an MFC anode. The PANI was grafted on the CS-NCNT backbone to synthesize the ternary composite. This bioanode not only increased the active surface area and capacity but also facilitated bacterial adhesion and enrichment of microbes. Compared with the NCNT/sponge electrode, the charge transfer impedance of the ternary composite bioanode decreased from 14.07 Ω to 2.25 Ω, and the maximum power density increased from 1.4 W·m^-3 to 4.2 W·m^-3; meanwhile, during the chronoamperometric experiment with a charge-discharge time of 60-60 min, the cumulative charge of the composite bioanode was 18,865.8 C·m^-2, which is much higher than that of the NCNT/S anode (3625.3 C·m^-2). High-throughput sequencing technology revealed that the ternary composite bioanode had good biocompatibility and high diversity. Therefore, this synthesized ternary composite is a promising candidate as a capacitive and biocompatible anode material in MFC.

Reduced Graphene Oxide Nanohybrid-Assembled Microneedles as Mini-Invasive Electrodes for Real-Time Transdermal Biosensing

A variety of nanomaterial-based biosensors have been developed to sensitively detect biomolecules in vitro, yet limited success has been achieved in real-time sensing in vivo. The application of microneedles (MN) may offer a solution for painless and minimally-invasive transdermal biosensing. However, integration of nanostructural materials on microneedle surface as transdermal electrodes remains challenging in applications. Here, a transdermal H₂ O₂ electrochemical biosensor based on MNs integrated with nanohybrid consisting of reduced graphene oxide and Pt nanoparticles (Pt/rGO) is developed. The Pt/rGO significantly improves the detection sensitivity of the MN electrode, while the MNs are utilized as a painless transdermal tool to access the in vivo environment. The Pt/rGO nanostructures are protected by a water-soluble polymer layer to avoid mechanical destruction during the MN skin insertion process. The polymer layer can readily be dissolved by the interstitial fluid and exposes the Pt/rGO on MNs for biosensing in vivo. The applications of the Pt/rGO-integrated MNs for in situ and real-time sensing of H₂ O₂ in vivo are demonstrated both on pigskin and living mice. This work offers a unique real-time transdermal biosensing system, which is a promising tool for sensing in vivo with high sensitivity but in a minimally-invasive manner.

Interaction of bacteria and archaea in a microbial fuel cell with ITO anode

A microbial fuel cell with an indium tin oxide (ITO) coated glass anode was used to study the mechanism of electricity generation and electron transfer of electrochemically active microbes (EAMs). A simple method of ITO anode pretreatment (pickling) was developed to improve the performance of the microbial fuel cell. After proper treatment, ITO-glass anodes maintained their conductivity with a slight increase in resistance. Using this pickling pretreatment, the ITO-glass microbial fuel cell with an anode area of only 8.3 cm², was successfully initiated and obtained a stable voltage and power output of 418.8 mW m⁻². The electrode material with pretreatment showed optimal performance for the in situ study of EAMs. DNA was extracted from various parts of the reactor and the microbial communities were analyzed. The results indicated that the large proportion of methane-related microbes on the cathode of the MFC was one of the reasons for its high COD removal and low columbic efficiency. ITO glass is suitable as an anode material for the in situ study of EAMs, and shows potential for practical application.

A microbial fuel cell with an indium tin oxide coated glass anode was used to study the mechanism of electricity generation and electron transfer of electrochemically active microbes.

Carbon-Based Microbial-Fuel-Cell Electrodes: From Conductive Supports to Active Catalysts

Microbial fuel cells (MFCs) have attracted considerable interest due to their potential in renewable electrical power generation using the broad diversity of biomass and organic substrates. However, the difficulties in achieving high power densities and commercially affordable electrode materials have limited their industrial applications to date. Carbon materials, which can exhibit a wide range of different morphologies and structures, usually possess physiological activity to interact with microorganisms and are therefore fast-emerging electrode materials. As the anode, carbon materials can significantly promote interfacial microbial colonization and accelerate the formation of extracellular biofilms, which eventually promotes the electrical power density by providing a conductive microenvironment for extracellular electron transfer. As the cathode, carbon-based materials can function as catalysts for the oxygen-reduction reaction, showing satisfying activities and efficiencies nowadays even reaching the performance of Pt catalysts. Here, first, recent advancements on the design of carbon materials for anodes in MFCs are summarized, and the influence of structure and surface functionalization of different types of carbon materials on microorganism immobilization and electrochemical performance is elucidated. Then, synthetic strategies and structures of typical carbon-based cathodes in MFCs are briefly presented. Furthermore, future applications of carbon-electrode-based MFC devices in the energy, environmental, and biological fields are discussed, and the emerging challenges in transferring them from laboratory to industrial scale are described.

Functional Graphene Nanomaterials Based Architectures: Biointeractions, Fabrications, and Emerging Biological Applications

Functional graphene nanomaterials (FGNs) are fast emerging materials with extremely unique physical and chemical properties and physiological ability to interfere and/or interact with bioorganisms; as a result, FGNs present manifold possibilities for diverse biological applications. Beyond their use in drug/gene delivery, phototherapy, and bioimaging, recent studies have revealed that FGNs can significantly promote interfacial biointeractions, in particular, with proteins, mammalian cells/stem cells, and microbials. FGNs can adsorb and concentrate nutrition factors including proteins from physiological media. This accelerates the formation of extracellular matrix, which eventually promotes cell colonization by providing a more beneficial microenvironment for cell adhesion and growth. Furthermore, FGNs can also interact with cocultured cells by physical or chemical stimulation, which significantly mediate their cellular signaling and biological performance. In this review, we elucidate FGNs-bioorganism interactions and summarize recent advancements on designing FGN-based two-dimensional and three-dimensional architectures as multifunctional biological platforms. We have also discussed the representative biological applications regarding these FGN-based bioactive architectures. Furthermore, the future perspectives and emerging challenges will also be highlighted. Due to the lack of comprehensive reviews in this emerging field, this review may catch great interest and inspire many new opportunities across a broad range of disciplines.

Surface modification of carbon cloth anodes for microbial fuel cells using atmospheric-pressure plasma jet processed reduced graphene oxides

Surface modification of a carbon cloth anode by screen-printing rGO and APPJ is promising for manufacturing large-scale MFC stacks.

Protection of carbon steel corrosion in 3.5% NaCl medium by aryldiazonium grafted graphene coatings

Modification of CS/G by 1,8 ND containing two phenyl rings and two azo groups led to higher protection efficiency.

Electrochemical Behavior of Anode-Respiring Bacteria on Doped Carbon Electrodes

Cultivating anodic respiring bacteria (ARB) on anodes doped with metal-enhanced biological growth and affected higher electocatalytic activity (ECA). The anode doped with calcium sulfide (CaS) proved more favorable for ARB than the magnetite (Fe₃O₄) or iron(II) sulfide (FeS). Average anodic current densities of 8.4 Am^2- (Fe₃O₄), 11.1 Am^2- (FeS), and 22.0 Am^2- (CaS) were achieved as compared to that of nondoped carbon (5.1 A m^-2). Thus, CaS-doped graphite represents a promising anode material which is suitable for highly efficient bioelectrochemical systems (BES). Electrochemical evaluation during turnover and starvation using simple cycle voltammetry (CV) and derivative cycle voltammetry (DCV) indicated several extracellular electron transfer (EET) pathways characterized with lower potentials for biofilms. However, despite the high affinity of bacteria to iron, their lower ECA was kinetically attributed to the accumulation of self-produced mediators on iron-doped anodes.

Fe3O4@PEG-SO3H rod-like morphology along with the spherical nanoparticles: novel green nanocomposite design, preparation, characterization and catalytic application

A new heterogeneous nanocatalyst was successfully synthesized, completely characterized and efficiently applied in the synthesis of dihydropyrimidines.

Electrochemical and surface evaluation of the anti-corrosion properties of reduced graphene oxide

Herein, reduced graphene oxide nanosheets (RGON) were electrochemically grown onto a carbon steel alloy from graphene oxide (GO)​ and the anti-corrosion performance of the RGON-deposited layers was evaluated.

Current status, key challenges and its solutions in the design and development of graphene based ORR catalysts for the microbial fuel cell applications

Microbial fuel cells (MFC) are considered as the futuristic energy device that generates electricity from the catalytic degradation of biodegradable organic wastes using microbes, which exist in waste water. In MFCs, oxygen serves as a cathodic electron acceptor and oxygen reduction kinetics played a significant role in the determination of overall efficiency. A wide range of strategies have been developed for the preparation and substantial modification of oxygen reduction reaction (ORR) catalysts to improve the maximum volumetric power density of MFCs, in which the efforts on graphene based ORR catalysts are highly imperative. Although numerous research endeavors have been achieved in relation with the graphene based ORR catalysts applicable for MFCs, still their collective summary has not been developed, which hinders the acquirement of adequate knowledge on tuning the specific properties of said catalysts. The intension of this review is to outline the significant role of ORR catalysts, factors influencing the ORR activity, strategies behind the modifications of ORR catalysts and update the research efforts devoted on graphene based ORR catalysts. This review can be considered as a pertinent guide to understand the design and developmental strategies of competent graphene based ORR catalysts, which are not only applicable for MFCs but also for number of electrochemical applications.

l-Cysteine tailored porous graphene aerogel for enhanced power generation in microbial fuel cells

l-Cysteine tailored porous graphene aerogel anode possesses three dimensional pore structures and biocompatibility surface for increased biocatalyst loading and thus achieves high power density inS. putrefaciensmicrobial fuel cells.