Characterization and Photocatalytic Performance of Tin Oxide

Thermally Assisted Grinding of Cassiterite Associated with Pollimetallic Ore: A Comparison between Microwave and Conventional Furnaces

We investigated the influence of microwave and conventional heating pretreatments on the grinding of cassiterite associated with pollimetallic ore. The minerals that exhibited a stronger microwave absorption ability crushed first, which is the main difference between the microwave and the traditional heating pretreatments. The distribution of Fe, Pb, Zn, and Sn increased in the fine size range (−0.425 mm). The Fe and Pb grades in the size ranges of −3.2 + 2 mm and −2 + 1 mm after the microwave pretreatment (6 kW, 1 min) were lower than those of the traditional heating (12 kW, 400 °C, 20 min), indicating that the microwave selective heating was beneficial for pyrite and jamesonite. The grade and distribution of Sn decreased significantly in the size ranges of −3.2 + 2 mm and −2 + 1 mm and increased in the size ranges of −0.425 + 0.15 mm and −0.15 + 0.074 mm. Microwave heating treatment promoted the grinding of sulfide ore and reduced the cassiterite overgrinding.

Electrical behavior and enhanced photocatalytic activity of (Ag, Ni) co-doped ZnO nanoparticles synthesized from co-precipitation technique

Methylene blue (MB) dye is the most common harmful, toxic, and non-biodegradable effluent produced by the textile industries. The present study investigates the effect of zinc oxide (ZnO) nanoparticles (NPs) and Ag-Ni doped ZnO NPs on the performance of photocatalytic degradation of MB dye. Pure ZnO and Ag-Ni doped ZnO NPs are synthesized using the co-precipitation method. The crystalline nature and surface morphology of the synthesized pure ZnO and Ag-Ni doped ZnO NPs was characterized by powder X-ray diffraction, scanning electron microscopy (SEM), and high resolution transmission electron microscopy (HRTEM) analysis. The presence of spherical-like morphologies was confirmed from SEM and HRTEM analysis. The presence of Ni-O and Zn-O bands in the synthesized materials was found by Fourier transform infrared (FTIR) spectroscopy analysis. The MB dye was degraded under UV-light exposure in various pH conditions. The Ag (0.02%)-Ni doped ZnO NPs exhibits highest photocatalytic activity of 77% under pH 4.

Photodegradation of Gas Phase Benzene by SnO2 Nanoparticles by Direct Hole Oxidation Mechanism

Photodegradation of gas phase benzene by SnO2 nanoparticles has been studied in humid air, dry air and N2 by using a tubular photoreactor. The SnO2 nanoparticles are synthesized by the oxidation of anhydrous stannic chloride (SnCl4) in a propane/air turbulent flame. Direct hole oxidation and the ·OH radical mechanisms have been discussed based on experimental results. The goal of this research is to explore a viable and efficient alternative photocatalyst and photocatalytic process, in particular, for humidity-tolerant photocatalyst or photocatalytic process in environmental applications.

Formation and photocatalytic application of ZnO nanotubes using aqueous solution

Vertically aligned ZnO nanotubes were prepared by etching ZnO rod arrays in aqueous solution, which were previously developed by chemical bath deposition method. The morphological, structural, photoluminescence, as well as photocatalytic properties of the ZnO nanotubes were examined with respect to the pH values of chemical bath solution. The morphology of the products was found to be sensitive to the pH values and chemical bath temperatures. The nanotubes synthesized at a low pH value (5.82) exhibited a strong UV emission and a weak defect-related visible emission. The highest photocatalytic efficiency was also observed at pH = 5.82. The possible mechanism for the difference of photocatalytic efficiency was discussed.