Synthesis of Ultrahigh Molecular Weight Polyethylene Using Traditional Heterogeneous Ziegler−Natta Catalyst Systems

Sulfonated porous organic polymer supported Ziegler-Natta catalysts for the synthesis of ultra-high molecular weight polyethylene

Porous organic polymers (POPs) are attracting attention for their easy functionalization and potential as catalyst supports in olefin polymerization. In this study, sulfonated POP (s-POP) supported Ziegler-Natta catalysts were used for ethylene polymerization, producing ultra-high molecular weight polyethylene, with M ν reaching up to 6.83 × 106 g mol-1. The maximum M ν of polyethylene was achieved by Cat-3 with DIBP as the internal donor, albeit with a partial loss of catalytic activity. Polymerization conditions also play a pivotal role in determining the molecular weight of polyethylene. Hydrogen, being the most efficient chain transfer agent, can decrease the molecular weight to 9.68 × 104 g mol-1 at higher hydrogen concentrations ([H2] : [C2H4] = 0.83), and the s-POP-supported ethylene polymerization catalysts were observed to exhibit high sensitivity to hydrogen response. The effects of polymerization temperature, [Al] : [Ti] molar ratio, and ethylene pressure on ethylene polymerization were thoroughly investigated.

Recent Advancements in the Synthesis of Ultra-High Molecular Weight Polyethylene via Late Transition Metal Catalysts

Ultra-high molecular weight polyethylenes (UHMWPEs) are significant engineering plastics for their unique properties, such as high impact resistance, abrasion resistance, weatherability, lubricity, and chemical resistance. Consequently, developing a suitable catalyst is vital in facilitating the preparation of UHMWPE. The late transition metal catalysts have emerged as effective catalysts in producing UHMWPE due to their availability, enhanced tolerance to heteroatom groups, active polymerization characteristics, and good copolymerization ability with polar monomers. In this review, we mainly focus on the late transition metal catalysts, summarizing advancements in their application over the past decade. Four key metals (Ni, Pd, Fe, Co) for generating linear or branched UHMWPE will be primarily explored in this manuscript.

A Self-Supporting Strategy for Gas-Phase and Slurry-Phase Ethylene Polymerization using Late-Transition-Metal Catalysts

The polyolefin industry is dominated by gas-phase and slurry-phase polymerization using heterogeneous catalysts. In contrast, academic research is focused on homogeneous systems, especially for late-transition-metal catalysts. The heterogenization of homogeneous catalysts is a general strategy to provide catalyst solutions for existing industrial polyolefin synthesis. Herein, we report an alternative, potentially general strategy for using homogeneous late-transition-metal catalysts in gas-phase and slurry-phase polymerization. In this self-supporting strategy, catalysts with moderate chain-walking capabilities produced porous polymer supports during gas-phase ethylene polymerization. Chain walking, in which the metal center can move up and down the polymer chain during polymerization, ensures that the metal center can travel along the polymer chain to find suitable sites for ethylene enchainment. This strategy enables simple heterogenization of catalysts on solid supports for slurry-phase polymerization. Most importantly, various branched ultra-high-molecular-weight polyethylenes can be prepared under various polymerization conditions with proper catalyst selection.