Atomic-Force and Optical Microscopy Investigations on Thin-Film Morphology of Spherulites in Melt-Crystallized Poly(ethylene adipate)

Synchrotron X-Ray Analysis and Morphology Evidence for Stereo-Assemblies of Periodic Aggregates in Poly(3-hydroxybutyrate) with Unusual Photonic Iridescence

3D morphology of poly(3-hydroxybutyrate) (PHB), crystallized in the presence of diluents of poly(1,3-trimethylene adipate) and poly(ethylene oxide), is probed using a novel approach coupled with selective etching. For interpreting the mechanisms of crystal periodic aggregation, various microscopic techniques and synchrotron microbeam X-ray analysis are used to observe the top surface in connection with the 3D crystal assemblies. Periodic grating architectures, with the cross-bar pitch exactly matching with the optical band spacing, are proved in banded PHB. The crystals under the ridge branch out to spawn finer crystals orienting/bending horizontally underneath the valley band, repeating till species drainage or impingement. The grating structure in the banded PHB resembles many nature's iridescence crystals and is further proved by photonic reflection results as a critical breakthrough novel finding.

Microstructural Periodic Arrays in Poly(Butylene Adipate) Featured with Photonic Crystal Aggregates

Poly(butylene adipate) (PBA) self-aggregation into unique periodicity correlating to its interfacial photonic properties is probed in detail. Investigations on the unique periodic morphology and top-surface and interior architectures in specifically crystallized PBA are focused on its novel photonic patterns with periodic gratings. Detailed analysis of the interior lamellae from ringless to periodically ordered aggregates (crystallized at 33-35 °C vs. T_c = 30 °C) serves as ideal comparisons. Each interior arc-shape shell is composed of tangential and radial lamellae mutually intersecting at 90^o angle. The interior layer thickness in SEM-revealed arc-shape shish-kebab shell is exactly equal to the optical inter-band spacing (≈6 µm). A 3D assembly mechanism of periodically banded PBA crystals is proposed, where the orderly arrays on top surfaces as well as the interior microstructures of strut-rib alternate-layered assembly resemble nature's photonic crystals and collectively account for the interfacial photonic properties in the ring-banded PBA crystal that is novel and has potential applications in future.

Analysis of molecular orientation in polymeric spherulite using polarized micro attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopic imaging

Micro ATR-FTIR spectroscopic imaging enables the visualization of two-dimensional chemical distribution at a higher spatial resolution than macro-transmission FTIR imaging approach. In this study, micro ATR-FTIR imaging was applied for analysis of a specific morphology in a spherulite of poly(3-hydroxybutyrate) (PHB). The PHB spherulites crystallized at an isothermal condition, showed the fine band structure due to the twisting lamellar crystals during the spherulite growth under the polarized optical microscope (POM). In addition, the band structure observed in the PHB spherulite was the double band pattern in which the higher and lower birefringence banded areas alternatively appear due to the three-dimensional orientation of crystallographic axes and the biaxial refractive index ellipsoid of PHB crystalline structure. Micro ATR-FTIR spectroscopic imaging was employed for detecting the double band structure in the PHB spherulite. However, the obtained spectral images did not indicate any band structures. To detect the difference of molecular orientation among the double band structures, the micro ATR-FTIR imaging was performed with a linear polarizer at four different angles. The mean values of absorbance in each measured area changed depending on the polarizer angle. The in-plane molecular orientation to the tangential direction of spherulite, caused by the dependence of the average absorbance on the polarizer angles, was determined by the position of measured area in the spherulite and the linear dicroism of each of the spectral band used. To visualize the small difference of molecular orientation in the double band structure, micro ATR-FTIR images of the dichroic differences at three spectral bands were calculated from two different sets of polarizer angles. The micro ATR-FTIR images representing the dichroic differences displayed their corresponding distributions among three spectral bands. The complementary distributions of the dichroic difference were caused by the crystallographic orientation of b- and c-axes and were successfully visualized to reveal the pattern with the features less than 10 μm in size. The results achieved in this study were due to two advantages of the polarized micro ATR-FTIR imaging: the high spatial resolution of micro ATR-FTIR imaging technique, and the high sensitivity of polarization measurements. Thus, this work demonstrates the power of this spectroscopic approach for such analytical investigation.

Three-dimensional interior analyses on periodically banded spherulites of poly(dodecamethylene terephthalate)

Polarized optical, atomic force, and scanning electron microscopy images showing the correlations of three-dimensional crystal arrangements with optical properties exhibited by poly(dodecamethylene terephthalate).

Intertwining lamellar assembly in porous spherulites composed of two ring-banded poly(ethylene adipate) and poly(butylene adipate)

Poly(1,4-butylene adipate) (PBA) and poly(ethylene adipate) (PEA), each with the ability to form ring-banded morphologies at same Tc, were simultaneously crystallized from mixtures of various compositions. Investigations on morphology, phase and thermal behavior were conducted in order to reveal lamellar packing and spherulitic structures in this binary system. As PBA is faster-crystallizing and dominates the crystallization process, it is relatively easy to maintain its ordered ring-banded pattern in a PBA/PEA blend when there is a moderate amount of PBA in the composition (40 wt% or greater). On the other hand, PEA is much slower crystallizing and it has to be in extreme majority (PEA > 95 wt%) in the PBA/PEA mixtures in order to crystallize into ring-banded spherulites of PEA pattern. When PBA composition is between 10 and 40 wt% in the PBA/PEA blend, simultaneous crystallization of PBA and PEA leads to an interpenetrating morphology with an interwoven bird-nest pattern. Porous structures with crevices, owing to the interpenetrating PBA and PEA lamellae, resulted in simultaneous crystallization of these two biodegradable polyesters.

Synthesis and properties of novel poly(ethylene succinate-co-decamethylene succinate) copolymers

The tensile properties of poly(ethylene succinate-co-decamethylene succinate) copolymers may be well regulated by the decamethylene succinate contents.

Unusual crystallization behavior of biodegradable poly(ethylene adipate) based nanocomposites induced by graphene oxide

GO increases both the nucleation density and the growth rate of PEA spherulites in nanocomposites.