Temperature-induced phase transition of pyrene-labeled (hydroxypropyl) cellulose in water: picosecond fluorescence studies

Fluorescence Study of the Interaction between Hydrophobically Modified Polymers and Charged Particles in Aqueous Media

The interaction of hydrophobically randomly modified and end-modified poly(2-(acrylamido)-2-methylpropanesulfonate)s (PAMPSs) with nonionic and positively and negatively charged surfactants was studied with the fluorescence spectroscopic technique of labeled pyrene. The results indicated that the randomly modified PAMPS bound to the nonionic and positively charged surfactants and that the disruption of intrapolymer micelles formed by the polymer occurred. In contrast, end-modified PAMPS was bound to the surfactants without the disruption of multipolymer aggregates formed by the polymer in a comparably low concentration range of surfactants. The conformation of the polymer-surfactant complex was confirmed to depend on the position of the hydrophobic group in the polymer chains. In the case of negatively charged surfactant, the complex formation between the polymers and the surfactants was significantly restricted due to the electrostatic repulsion of anionic sites of the polymer chains and the negatively charged surfactants.

Stimulus-Responsive Supramolecular Host-Guest Assembly of a Cationic Pyrene Derivative with Sulfated β-Cyclodextrin

In general, aggregation-prone organic molecules are prevented from self-aggregation in the presence of macrocyclic hosts like β-cyclodextrin because of their preference for the formation of inclusion complex with guest molecules. On the contrary, sulfate-laced β-cyclodextrin has been recently reported to induce the aggregation of some of the non-aggregation-prone organic dyes, which have been subsequently utilized for biosensing applications. In the present contribution, we report the interaction of a cationic organic probe molecule, 1-pyrene methyl amine (PMA), which belongs to one of the most useful families of organic fluorescent probes, that is, pyrene, with a sulfated β-cyclodextrin derivative (SCD). Interaction of a cationic probe with a β-cyclodextrin derivative was studied using a variety of photophysical methods such as ground-state absorption, steady-state emission, and time-resolved emission techniques. Detailed photophysical investigations have revealed that SCD induces the ground-state association of PMA molecules. This SCD-induced aggregation of PMA molecules has been attributed to the charge neutralization of the cationic probe by negatively charged sulfate groups, which subsequently lead to their association because of the close proximity on the rims of cyclodextrin. This monomer-dimer equilibrium of the PMA-SCD system is found to be extremely responsive to external chemical stimuli like temperature, pH, ionic strength of the medium, and organic solvent (dimethyl sulfoxide), which projects them as potential platforms for various sensing applications including bioanalytes. The supramolecular assembly has been demonstrated to sense arginine.

Cholesterol-pyrene as a probe for cholesterol distribution on ordered and disordered membranes: Determination of spectral wavelengths

Biological membranes contain a large variety of lipids species compartmentalized in different domains heterogeneous in size, composition and dynamics. Cholesterol induces membrane ordered domains thanks to its affinity for saturated lipids. Membrane domains had been studied with fluorescent probes either linked to phospholipids and proteins or as individual fluorophore. However, no efficient formulation of a cholesterol probe has been available so far. Herein, we described a cholesterol-pyrene probe behaviour in heterogeneous membranes. We characterised the pyrene fluorescence spectra in liquid-ordered (Lo) and liquid-disordered (Ld) membranes. Using statistical multivariate analysis, we found out the most appropriate wavelengths for membrane domains studies. 373 nm and 379 nm were the most discriminant wavelengths to follow the liquid-ordered and the liquid-disordered environments. Cholesterol clustering behaviour was quantified by the modulation of the cholesterol-pyrene excimers peak (474 nm). In liquid-ordered membranes at low temperature, cholesterol-pyrene was found as multimers and as monomers. At high temperature, the liquid-ordered status of the membrane decreases and cholesterol-pyrene tends to cluster. In liquid-disordered membranes, cholesterol-pyrene was present mostly as monomers and the small quantity of excimers increased with temperature. Cholesterol-pyrene was used to test the ceramide effect on membranes, and presented a behaviour in agreement with the cholesterol behaviour reported in the literature. Overall, the presented data show that cholesterol-pyrene is an efficient sensor to study liquid ordered and liquid disordered organisation in membranes.

Confinement Effects on Polymer Dynamics: Thermo-Responsive Behaviours of Hydroxypropyl Cellulose Polymers in Phospholipid-Coated Droplets (Water-in-Oil Emulsion)

In order to construct the artificial cells and to understand the physicochemical properties of living cells, it is important to clarify the cell-sized confinement effect on the behaviours of bio-inspired polymers. We report the dynamic behaviours of aqueous hydroxypropyl cellulose (HPC) solution coated with phospholipids in oil (water-in-oil droplets, W/O droplets), accompanied by an increase in the temperature. We directly observed the beginning of phase separation of HPC solution using a fluorescence microscope and confirmed the dependence of such phenomena on droplet size. The results indicate that the start time of phase separation is decreased with an increase in droplet size. The experimental results suggest that the confinement situation accelerates the phase separation of aqueous HPC solutions.

Smart polyaniline nanoparticles with thermal and photothermal sensitivity

Conductive polyaniline nanoparticles (PANI NPs) are synthesized by oxidation of aniline with persulfate in acid media, in the presence of polymeric stabilizers: polyvinilpyrrolidone (PVP), poly(N-isopropylacrylamide) (PNIPAM), and hydroxylpropylcellulose (HPC). It is observed that the size of the nanoparticles obtained depends on the polymeric stabilizer used, suggesting a mechanism where the aggregation of polyaniline molecules is arrested by adsorption of the polymeric stabilizer. Indeed, polymerization in the presence of a mixture of two polymers having different stabilizing capacity (PVP and PNIPAM) allows tuning of the size of the nanoparticles. Stabilization with biocompatible PVP, HPC and PNIPAM allows use of the nanoparticle dispersions in biological applications. The nanoparticles stabilized by thermosensitive polymers (PNIPAM and HPC) aggregate when the temperature exceeds the phase transition (coil to globule) temperature of each stabilizer (Tpt = 32 °C for PNIPAM or Tpt = 42 °C for HPC). This result suggests that an extended coil form of the polymeric stabilizer is necessary to avoid aggregation. The dispersions are reversibly restored when the temperature is lowered below Tpt. In that way, the effect could be used to separate the nanoparticles from soluble contaminants. On the other hand, the PANI NPs stabilized with PVP are unaffected by the temperature change. UV-visible spectroscopy measurements show that the nanoparticle dispersion changes their spectra with the pH of the external solution, suggesting that small molecules can easily penetrate the stabilizer shell. Near infrared radiation is absorbed by PANI NPs causing an increase of their temperature which induces the collapse of the thermosensitive polymer shell and aggregation of the NPs. The effect reveals that it is possible to locally heat the nanoparticles, a phenomenon that can be used to destroy tumor cells in cancer therapy or to dissolve protein aggregates of neurodegenerative diseases (e.g. Alzheimer). Moreover, the long range control of aggregation can be used to modulate the nanoparticle residence inside biological tissues.

Reversible tuning luminescent color and emission intensity: a dipeptide-based light-emitting material

A smart luminescent material whose emission color and emission intensity can be separately modulated by external force is demonstrated. The rational manipulation of rich noncovalent interactions and fluorophore packing style promotes an in-depth understanding between supramolecular structure and photophysical property and offers an effective strategy to modulate the light-emitting property in a predicative way.

Aqueous polymeric sensors based on temperature-induced polymer phase transitions and solvatochromic dyes

This feature article provides, for the first time, an overview of the research that guided the way from fundamental studies of the thermo-responsive phase separation of aqueous polymer solutions to polymeric sensor systems. The incorporation of solvatochromic dyes into thermoresponsive polymers as well as the concepts of polymeric sensors are presented and discussed in detail.

Fluorescent Probe as Reporter on the Local Structure and Dynamics in Hydrolysis−Condensation Process of Organotrialkoxysilanes

To get some information on the aggregation behaviors of the products derived from different organotrialkoxysilanes, the hydrolysis-condensation processes of some organotrialkoxysilanes have been examined by means of pyrene as fluorescent probe. The organotrialkoxysilanes used in the research were n-octadecyltri-methoxysilane (ODTMS), n-octyltrimethoxysilane (OTMS), 3-glycidoxypropyltrimethoxysilane (GTMS), 3-methacryloxypropyltrimethoxysilane (MAPTMS), and propyltrimethoxy-silane (PTMS). The results show that pyrene as fluorescence probe can respond sensitively not only to the organization state of the hydrolysates but also to the change in the organization state during the condensation process. The organization states during the hydrolysis and condensation can be explained in terms of structures of the products. In the initial stage, the silanols with long organic chains are amphiphilic molecules, and such nature of the silanols can be compared to that of a surfactant. Therefore, the excimer emission of pyrene is extremely obvious because of such silanols being prone to form aggregates. In the case of silanols having short alkyl groups or epoxy groups, these silanols homogenously disperse in solution, which results in the appearance of an only monomer emission of pyrene. In the late stage, the fluorescence behavior of pyrene is also sensitive to structural evolution of the silicates. The fluorescence spectra of pyrene during the condensation of the silanols with short alkyl groups or epoxy groups are almost in silence, indicating that the condensation products, with a low condensation degree, homogeneously disperse in solution. For the silanols with long hydrophobic substituents in different lengths, the changes in fluorescence spectra of pyrene during the condensation are varied. Commonly, the excimer emission is noticeable, implying that the condensation products with high condensation degree inhomogenously disperse in solution. However, the relative excimer/monomer fluorescence intensity is alkyl chain-length dependent. The longer alkyl chains in the condensation products result in the appearance of the obvious excimer emission. These phenomena imply that the condensation degree of the products increases with the length of the alkyl chains. Additionally, the distorted spectrum of pyrene appears in the case of the organotrialkoxysilanes with side chain substituent, illustrating that the steric hindrance between the substituents can be monitored by fluorescence of pyrene. All these results are verified by the fluorescence-quenching measurements. The approach in the present study gives new insights into the local structure and dynamics in hydrolysis-condensation process of organotrialkoxysilanes and emphasizes the influence of the self-assembling behavior.

Self-Assembly of a Hydrophobically Modified Naphthalene-Labeled Poly(acrylic acid) Polyelectrolyte in Water:Organic Solvent Mixtures Followed by Steady-State and Time-Resolved Fluorescence

The solution properties of two water-soluble polymers, poly(acrylic acid) (PAA), covalently labeled with the fluorescent hydrophobic dye naphthalene (Np), have been investigated in water:organic solvent mixtures. The naphthalene chromophores have been randomly attached, onto the polymer, with two different degrees of labeling. Fluorescence measurements (steady-state and time-resolved) have been used to follow the photophysical behavior of the polymers and consequently report on the self-association of the polymers in the mixed organic (methanol or dioxane):aqueous solutions. The emission spectra of the high-labeled Np PAA reveal the presence of monomer and excimer bands whereas with the low-labeled polymer only monomer emission is observed. The excitation spectra collected at the monomer and excimer emission bands show significant differences, depending on the water content of the mixture, which indicate the simultaneous presence of preformed and dynamic dimers as routes to excimer formation. The time-resolved data decay profiles of the high-labeled polymer in the mixtures were always triple exponential whereas in pure methanol and dioxane they follow biexponential laws. The data in the mixtures are consistent with two types of monomers and one excimer. Both monomers are able to give rise to excimer in the excited state, one type involving the movement of long distant Np chromophores and the other involving a local reorientation of adjacent Np chromophores. These correspond to different decay times: (1) a long which corresponds to the long distant approach of non-neighboring Np chromophores forming an excimer and (2) a short corresponding to the fast adjustment of two neighboring Np chromophores in order to have the adequate parallel geometry. An additional decay time corresponding to the excimer decay was found to be present at all wavelengths. All the decay times were dependent on the water content of the mixture. An estimation of the two excimer forming rate constants values is made for the mixed media considered in this work. On the whole, using both steady-state and time-resolved fluorescence parameters, and by comparing data for a polymer with a small number of hydrophobes with a more highly modified one, it is possible in great detail to demonstrate how association is controlled by solvent quality for the hydrophobes and by the distance between hydrophobes.

Thermal characterization of poly(ethylene glycol)-poly(D,L-lactide) block copolymer micelles based on pyrene excimer formation

Poly(ethylene glycol)--poly(D,L-lactide) (PEG-PDLLA) block copolymers were prepared by anionic ring-opening polymerization, resulting in block sizes effectively controlled by initial monomer/initiator ratios and low molecular weight distributions (<1.12). A pyrene derivative (1-pyrenyl carbonyl cyanide--Py) was conjugated to the end of the hydrophobic block (PDLLA) in a quantitative manner, with coupling efficiencies >95%. The so-obtained PEG-PDLLA-Py copolymers displayed fluorescent properties that were associated with the pyrene monomers, when placed in good solvents for both the hydrophilic and hydrophobic blocks. When placed in selective solvents, these copolymers self-assembled into micelles in the 30-nm range, also with low particle size distributions (<0.09), within which Py could be readily entrapped in the hydrophobic PDLLA core. Py entrapment resulted in the formation of excimers, as evident from fluorescence measurements. Observation of excimer formation/dissociation further conveyed information on the physicochemical properties of the core. Thermal characterization of these systems showed that an increase in the temperature resulted in changes in the properties of excimer fluorescence, an occurrence attributed to a higher mobility of the otherwise glassy PDLLA. This, in turn, greatly affected the inter-molecular distance between pyrene molecules, a crucial factor for excimer formation. The glass transition of the PDLLA block, approximately 38 degrees C, defined the onset for increasing chain mobility and whence excimer dissociation. Excimer fluorescence appeared to be time-dependent. Based on these observations, chain exchange processes were clearly evidenced through the time-dependent dissociation of excimers into unimers, a process that was influenced by changes in temperature.

Fluorescent molecular thermometers based on polymers showing temperature-induced phase transitions and labeled with polarity-responsive benzofurazans

Poly(N-isopropylacrylamide) in aqueous solution undergoes a phase transition at approximately 32 degrees C. The fluorescence properties of benzofurazans are affected by solvent polarity. We combine these two characteristics for the first time to develop sensitive fluorescent molecular thermometers. Five fluorescent monomers having a benzofurazan skeleton were synthesized, and the copolymers of N-isopropylacrylamide (NIPAM) and a small quantity of the fluorescent monomer were obtained to investigate their fluorescence properties. With increase in temperature, the copolymers in water showed the temperature-induced phase transition at approximately 32 degrees C and the fluorescence intensities of the copolymers concurrently increased. Especially, for the copolymer of 4-N-(2-acryloyloxyethyl)-N-methylamino-7-N,N-dimethylaminosulfonyl-2,1,3-benzoxadiazole and NIPAM, the fluorescence intensity at 37 degrees C was 13.3-fold that seen at 29 degrees C. The sensitive range of temperature of these fluorescent molecular thermometers is changed by the replacement of the NIPAM units by N-isopropylmethacrylamide or N-n-propylacrylamide units in the copolymers. The basis of these fluorescent molecular thermometers is the decrease in the microenvironmental polarities near the main chains of the copolymers with increasing temperature, as confirmed from the maximum emission wavelengths of the benzofurazan units in the copolymers. The responses from the copolymers to the change in temperature are reversible and exactly repeatable during at least 10 cycles of heating and cooling.