Solid-state vanadium-51 NMR structural studies on supported vanadium(V) oxide catalysts: vanadium oxide surface layers on alumina and titania supports

Geometry and Local Environment of Surface Sites in Vanadium-Based Ziegler-Natta Catalysts from 51V Solid-State NMR Spectroscopy

Since its emergence over 50 years ago, the structure of surface sites in Ziegler-Natta catalysts, which are responsible for a major fraction of the world's supply of polyethylene (PE) and polypropylene (PP), has remained elusive. This is in part due to the complexity of these systems that involve multiple synthetic steps and components, namely, the MgCl2 support, a transition-metal chloride, and several organic modifiers, known as donors, that are used prior and in some instances during the activation step with alkyl aluminum. Due to the favorable nuclear magnetic resonance (NMR) properties of V and its use in Ziegler-Natta catalysts, we utilize 51V solid-state NMR spectroscopy to investigate the structure of VOCl3 on MgCl2(thf)1.5. The resulting catalyst shows ethylene polymerization activity similar to that of its Ti analogues. Using carefully benchmarked density functional theory (DFT) calculations, the experimental 51V NMR signature was analyzed to elucidate the structure of the surface sites. Using this approach, we demonstrate that the 51V NMR signature contains information about the coordination environment, i.e., the type of ancillary ligand, and the morphology of the MgCl2 support. Analysis of the NMR signature shows that the adsorption of VOCl3 on MgCl2(thf)1.5 generates a well-defined hexacoordinated V-oxo species containing one alkoxy and four chloride ligands, whose local geometry results from the interaction with an amorphous MgCl2 surface. This study illustrates how NMR spectroscopy, which is highly sensitive to the local environment of the investigated nuclei, here V, enables us to identify the exact coordination sphere and to address the effect of the support morphology on surface site structures.

Micro- and nanostructured layered-kagome zinc orthovanadate BaZn3(VO4)2(OH)2

Pure micro- and nanocrystalline powders of the layered-kagome zinc orthovanadate BaZn3(VO4)2(OH)2 have been successfully prepared and thoroughly characterised. Microstructured samples (BaZn3-MPs) have been produced by hydrothermal reaction using synthetic martyite Zn3V2O7(OH)2·2H2O as the starting reagent. Nanoparticles (NPs) with an average size of ≈ 60 nm (BaZn3-NPs-7h) or ≈ 50 nm (BaZn3-NPs-25min) have been obtained by using a coprecipitation method at ambient pressure, and by varying the stirring time. Rietveld refinements of X-ray diffraction data indicate that micro- and nanostructured BaZn3(VO4)2(OH)2 both crystallize in a R3̄m structure very similar to that of the known layered-kagome compound BaCo3(VO4)2(OH)2. Transmission electron microscopy observation of BaZn3-NPs-7h and BaZn3-NPs-25min reveals crystallized NPs with homogenous distributions of Ba, Zn, and V elements. FT-IR and Raman spectra show subtle differences between micro- and nanostructured samples which cannot be linked to any differences in the average crystal structures. The high resolution 51V MAS NMR spectrum of BaZn3-MPs shows a single isotropic line attributed to VO43- groups with C3v point group. The spectra of the nanostructured samples reveal the presence of a weak additional signal which decreases in intensity with increasing the NPs size, and which has been tentatively assigned to the presence at the surface of the NPs of a small amount of V5+ ions in a different chemical environment. Nanostructuring also impacts the optical properties of BaZn3(VO4)2(OH)2. The UV-vis absorption spectra of NPs exhibit an additional weak transition in the visible domain which is not observed for the microstructured sample.

Probing the nature of Lewis acid sites on oxide surfaces with 31P(CH3)3 NMR: a theoretical analysis

The characterization of catalytic oxide surfaces is often done by studying the properties of adsorbed probe molecules. The ³¹P NMR chemical shift of adsorbed trimethylphosphine, P(CH₃)₃ or TMP, has been used to identify the presence of different facets in oxide nanocrystals and to study the acid-base properties of the adsorption sites. The NMR studies are often complemented by DFT calculations to provide additional information on TMP adsorption mode, bond strength, etc. So far, however, no systematic study has been undertaken in order to compare on the same footing the chemical shifts and the adsorption properties of TMP on different oxide surfaces. In this work we report the results of DFT+D (D = dispersion) calculations on the adsorption of TMP on the following oxide surfaces: anatase TiO₂(101) and (001), rutile TiO₂(110), tetragonal ZrO₂(101), stepped ZrO₂(134) and (145) surfaces, rutile SnO₂(110), (101) and (100), wurtzite ZnO(101̄0), and cubic CeO₂(111) and (110). Beside the stoichiometric surfaces, also reduced oxides have been considered creating O vacancies in various sites. TMP has been adsorbed on top of variously coordinated Lewis acid cation sites, with the aim to identify, also with the support of machine learning algorithms, trends or patterns that can help to correlate the ³¹P chemical shift with physico-chemical properties of the oxide surfaces such as adsorption energy, Bader charges, cation-P distance, work function, etc. Some simple correlation can be found within the same oxide between the ³¹P chemical shift and the adsorption energy, while when the full set of data is considered the only correlation found is with the net charge on the TMP molecule, a descriptor of the acid strength of the adsorption site.

Pascoite Minerals and Potential Application of NMR Spectroscopy

The 20 minerals encompassing the pascoite family of decavanadate isopolyanion-containing [V10O28]6− minerals include a few minerals, such as rakovanite, that have been described as containing a protonated decavanadate anion. Rakovanite was originally assigned the formula Na3[H3V10O28]•15H2O and now is redefined with an ideal formula (NH4)3Na3[V10O28]•12H2O. Nuclear magnetic resonance (NMR) and particularly 51V NMR spectroscopy is an informative method used to describe the protonation state and speciation in both solid and solution states of materials in the chemical and life sciences. However, 51V NMR spectroscopy has not yet been used experimentally to distinguish the protonation state of the decavanadate ion of leaching solutions and thus contributing to the discussion regarding the controversial protonation states of decavanadate ions in gunterite, rakovanite, and nashite. In contrast, the morphology and crystal structure for apatites, vanadinite, pyromorphite, and mimetite was related to 207Pb NMR chemical shifts, assisting in describing the local environments of these minerals. NMR spectroscopy could be a useful method if used in the future for decavanadate-containing minerals. Currently, partial reduction of two Pascoite minerals (caseyite and nashite) is proposed and accordingly could now effectively be investigated using a different magnetic resonance technique, EPR spectroscopy.

Investigation of vanadia-alumina catalysts with solid-state NMR spectroscopy and DFT

In this work, isolated surface sites of vanadium oxide on the alumina surface were modeled and compared to experimental data obtained with ⁵¹V Solid-State Nuclear Magnetic Resonance (SSNMR) spectroscopy. The geometry of the centers on the (100), (110), and (111) planes of the spinel structure and (010) monoclinic alumina was modeled using density functional theory (DFT); their ⁵¹V NMR parameters were calculated using the Gauge-Including Projector Augmented Wave (GIPAW) method. The comparison of the simulated theoretical spectra with the experimental ones made it possible to find the sites that are likely present on the surface of real catalysts. The minimum energy pathways of propane oxidative dehydrogenation to propene were calculated for the dioxovanadium site in order to estimate its activity.

Swelling layered minerals applications: A solid state NMR overview

Swelling layered clay minerals form an important sub-group of the phyllosilicate family. They are characterized by their ability to expand or contract in the presence or absence of water. This property makes them useful for a variety of applications, ranging from environmental technologies to heterogeneous catalysis, and including pharmaceutical and industrial applications. Solid State Nuclear Magnetic Resonance (SS-NMR) has been extensively applied in the characterization of these materials, providing useful information on their dynamics and structure that is inaccessible using other characterization methods such as X-ray diffraction. In this review, we present the key contributions of SS-NMR to the understanding of the mechanisms that govern some of the main applications associated to swelling clay minerals. The article is divided in two parts. The first part presents SS-NMR conventional applications to layered clay minerals, while the second part comprises an in-depth review of the information that SS-NMR can provide about the different properties of swelling layered clay minerals.

Controlling oxygen coordination and valence of network forming cations

Understanding the structure-property relationship of glass material is still challenging due to a lack of periodicity in disordered materials. Here, we report the properties and atomic structure of vanadium phosphate glasses characterized by reverse Monte Carlo modelling based on neutron/synchrotron X-ray diffraction and EXAFS data, supplemented by Raman and NMR spectroscopy. In vanadium-rich glass, the water durability, thermal stability and hardness improve as the amount of P₂O₅ increases, and the network former of the glass changes from VO_x polyhedra to the interplay between VO_x polyhedra and PO₄ tetrahedra. We find for the first time that the coordination number of oxygen atoms around a V⁴⁺ is four, which is an unusually small coordination number, and plays an important role for water durability, thermal stability and hardness. Furthermore, we show that the similarity between glass and crystal beyond the nearest neighbour distance is important for glass properties. These results demonstrate that controlling the oxygen coordination and valence of the network-forming cation is necessary for designing the properties of glass.

A comparison study between V-SBA-15 and V-KIT-6 catalysts for selective oxidation of diphenylmethane

Vanadium incorporated mesoporous SBA-15 and KIT-6 catalysts were prepared by a direct hydrothermal method under mild acidic reaction conditions.

NMR interaction tensors of 51V and 207Pb in vanadinite, Pb5(VO4)3Cl, determined from DFT calculations and single-crystal NMR measurements, using only one general rotation axis

Orientation-dependent NMR spectra of a single crystal of the mineral vanadinite, Pb₅(VO₄)₃Cl, were acquired using only one rotation axis with a general orientation in the hexagonal crystal lattice (space group P6₃/m). The chemical shift (CS) tensors for the ²⁰⁷Pb on Wyckoff positions 6h and 4f, and both CS and quadrupole coupling tensor Q for ⁵¹V at the positions 6h were determined by including the NMR response of symmetry-related atoms in the unit cell (and in case of ²⁰⁷Pb at 4f, also the isotropic shift from MAS NMR spectra). This previously suggested 'single rotation method' greatly reduces the necessary amount of data acquisition and analysis. The precise orientation of the rotation axis could not be found by X-ray diffraction experiments because of the high linear absorption coefficient of vanadinite, which is chiefly due to its high lead content. The axis orientation was therefore included into the multi-parameter data fit routine. This NMR-based approach is widely applicable, and offers an alternative way of orienting single crystals. The NMR parameters derived from the tensor eigenvalues are δ_iso=(-1729±9) ppm, Δδ=(-1071±5) ppm, η_CS=0.362±0.008 for ²⁰⁷Pb at positions 6h, and δ_iso=(-1619±2) ppm, Δδ=(-780±58) ppm, η_CS=0.06±0.08 for positions 4f. For ⁵¹V, δ_iso=(-509±3) ppm, Δδ=(-37±2) ppm, η_CS=0.78±0.09, with the quadrupolar coupling described by χ=(2.52±0.01) MHz and η_Q=0.047±0.003. In contrast to the precisely determined tensor eigenvalues, the orientation of the eigenvectors in the crystal ab -plane of the vanadinite system could only be resolved by resorting to data obtained from density functional theory (DFT) calculations.

Catalytic function of VOx/Al2O3 for oxidative dehydrogenation of propane: support microstructure-dependent mass transfer and diffusion

The intrinsic effect of the support microstructure on the catalytic function of VO_x/Al₂O₃ in the oxidative dehydrogenation of propane (ODHP) was studied.

Effect of positional isomerism and vanadium substitution on 51V magic angle spinning NMR Spectra Of Wells-Dawson polyoxotungstates

We examined the positional isomerism and vanadium substitution on the 51V magic angle spinning NMR spectra of potassium salts of vanadium-substituted polyoxotungstates of the Wells-Dawson series. NMR parameters of this class of catalytically active polyoxotungstates effect of are reported. Multiple species, indicative of differences in the local environment at the substitution sites, are observed in solid-state NMR spectra of the di- and tri- substituted complexes in contrast to solution NMR spectra, where single average chemical shift was observed. The quadrupolar and chemical shift anisotropy parameters depend strongly on the position and the degree of the vanadium substitution into the oxoanion core establishing 51V SATRAS NMR spectroscopy as a sensitive probe of the local electronic environment in these catalytically active solids.

Direct synthesis of V-containing all-silica beta-zeolite for efficient one-pot, one-step conversion of carbohydrates into 2,5-diformylfuran

V-containing all silica beta-zeolite exhibited high atom-efficiency in the direct synthesis of 2,5-diformylfuran from carbohydrates.

Relationship between Surface Chemistry and Catalytic Performance of Mesoporous γ-Al2O3 Supported VOX Catalyst in Catalytic Dehydrogenation of Propane

Mesoporous γ-Al₂O₃ was synthesized via a cation-anion double hydrolysis approach (CADH). The synthesized mesoporous alumina displayed a relatively high surface area, a large pore volume and a narrow pore size distribution. By applying the mesoporous alumina as a support, supported vanadium catalysts were prepared and evaluated in the dehydrogenation of propane, exhibiting a superior catalytic performance over that supported on a commercial alumina. Materials were characterized with a variety of techniques such as X-ray diffraction, X-ray photoelectron spectroscopy, ultraviolet-visible spectroscopy, ⁵¹V magnetic angle spinning nuclear magnetic resonance, Raman spectroscopy, Fourier transformed infrared spectroscopy of pyridine adsorption and thermogravimetric-differential thermal analysis. The correlated structure-performance relationship of catalysts reveals that a higher crystallization temperature endows mesoporous alumina materials with more surface acid sites, favoring the formation of polymerized VO_X species, which are more active than isolated ones in the propane dehydrogenation, resulting in a better catalytic performance. The established relationship between surface chemistry and catalytic performance of supported VO_X catalysts suggests that a superior vanadium catalyst for propane dehydrogenation could be achieved by rationally enriching the concentration of polymeric VO_X species on the catalyst, which can be realized by tuning the surface acidity of alumina support.

Stimulation of apoptotic pathways in liver cancer cells: An alternative perspective on the biocompatibility and the utility of biomedical glasses

A host of research opportunities with innumerable clinical applications are open to biomedical glasses if one considers their potential as therapeutic inorganic ion delivery systems. Generally, applications have been limited to repair and regeneration of hard tissues while compositions are largely constrained to the original bioactive glass developed in the 1960s. However, in oncology applications the therapeutic paradigm shifts from repair to targeted destruction. With this in mind, the composition–structure–property–function relationships of vanadium-containing zinc-silicate glasses (0.51SiO2–0.29Na2O–(0.20- X)ZnO– XV2O5, 0 ≤  X ≤ 0.09) were characterized in order to determine their potential as therapeutic inorganic ion delivery systems. Increased V2O5 mole fraction resulted in a linear decrease in density and glass transition temperature (Tg). 29Si MAS NMR peak maxima shifted upfield while 51V MAS NMR peak maxima were independent of V2O5 content and overlapped well with the spectra NaVO3. Increased V2O5 mole fraction caused ion release to increase. When human liver cancer cells, HepG2, were exposed to these ions they demonstrated a concentration-dependent cytotoxic response, mediated by apoptosis. This work demonstrates that the zinc-silicate system studied herein is capable of delivering therapeutic inorganic ions at concentrations that induce apoptotic cell death and provide a simple means to control therapeutic inorganic ion delivery.

Phosphorus-31 and vanadium-51 solid-state nuclear magnetic resonance spectroscopy of β-vanadyl phosphate — Effects of homo- and heteronuclear spin-spin, electrostatic, and paramagnetic interactions

Field-dependent 31P solid-state NMR studies demonstrate that the line shape in spectra of β-VOPO4 depends on 51V–31P direct and indirect spin-spin interactions (M2 (51V, 31P) = 101(23) × 106 rad2 s–2, 2Jiso (51V, 31P) = 48(5) Hz) and, to a lesser extent, on 31P chemical shift anisotropy (δiso = –10.4(2), Ω = δ11 – δ33 = 22(2) ppm) and 31P–31P interactions (M2 (31P, 31P) = 6.7(1) × 106 rad2 s–2). In contrast, homonuclear dipolar interactions play an important role for the field and spinning rate dependent 31P spin-lattice relaxation via paramagnetic impurities (T1 = 20–60 s). Vanadium-51 magic-angle spinning NMR spectra indicate a sizeable chemical shift anisotropy (δiso = –754(1), δ11 = –336(10), δ22 = –344(6), δ33 = –1581(8) ppm) and nuclear quadrupole interaction (χ = 1.5(1) MHz, η = 0.35(5)); the principal axis systems of both interactions are clearly not coincident, with an angle of 35(5)° between the greatest component of the electric field gradient tensor and δ33.

Using hyperbolic secant pulses to assist characterization of chemical shift tensors for half-integer spin quadrupolar nuclei in MAS powder samples

Determination of the NMR anisotropic magnetic shielding parameters from magic angle spinning, MAS, powder samples containing half-integer spin quadrupolar nuclei is achieved by analysis of the difference spectrum obtained with and without application of a hyperbolic secant pulse. Application of a hyperbolic secant pulse to any spinning sideband associated with the central transition, m(I) = 1/2 to m(I) = - 1/2, results in 'saturation' of the entire central transition manifold. Similarly, if one spinning sideband associated with the m(I) = 3/2 to m(I) = 1/2 and m(I) = - 1/2 to m(I) = - 3/2 satellite transitions is perturbed, the entire satellite manifold associated with these transitions is 'saturated' while the central transition is enhanced by population transfer. Three 'difference spectrum' techniques are employed to selectively yield the spinning sidebands associated predominantly from the central transition. The success of these difference techniques is first demonstrated by examining (51)V NMR spectra of three metavanadate salts and (59)Co NMR spectra of Co(acac)(3). The vanadium and cobalt chemical shift tensors in these compounds have spans between 400 and 1400 ppm. Because the hyperbolic secant techniques proposed here yielded results that are in good agreement with earlier reports, they have been applied to characterize the (51)V chemical shift tensor of the dimer of bis(N, N-dimethylhydroxamido)-hydroxooxovanadate, {V(O)(ONMe(2))(2)}(2)O, whose chemical shift tensor has not been previously reported.