The structure of lithium tetramethylpiperidide and lithium diisopropylamide in the presence of hexamethylphosphoramide: structure-dependent distribution of cyclic and open dimers, ion triplets, and monomers

Accelerating role of deaggregation agents in lithium-catalysed hydrosilylation of carbonyl compounds

A combined computational and experimental approach demonstrates the accelerating role of deaggregation agents, especially HMPA, in the Li-catalysed hydrosilylation of acetophenone in THF solution under very mild conditions.

Case for Lithium Tetramethylpiperidide-Mediated Ortholithiations: Reactivity and Mechanisms

Rate and mechanistic studies of ortholithiations by lithium 2,2,6,6-tetramethylpiperidide focus on four arenes: 1,4-bis(trifluoromethyl)benzene, 1,3-bis(trifluoromethyl)benzene, 1,3-dimethoxybenzene, and 4,4-dimethyl-2-phenyl-2-oxazoline. Metalations occur via substrate-dependent combinations of monosolvated monomer, disolvated monomer, and tetrasolvated dimer (triple ions). Density functional theory computational studies augment the experimental data. We discuss the challenges presented by shifting dimer-monomer proportions in determining the observable reaction orders and our mathematical treatment of such shifting in reactant structure.

Lithium Enolates Derived from Weinreb Amides: Insights into Five-Membered Chelate Rings

Enolization of O-methyl hydroxamic acids (Weinreb amides) in tetrahydrofuran solution with lithium diisopropylamide affords predominantly tetrameric enolates. Aryl substituents on the enolates promote deaggregation. The aggregation states are assigned by using the method of continuous variation in conjunction with 6Li NMR spectroscopy. Decoalescence of the tetramer resonance below -100 °C shows considerable spectral complexity attributed to isomerism of the methoxy-based chelates. Density functional theory calculations were used to examine the consequences of the bite angle of five-membered chelates in cubic tetramers and resulting solvation numbers that were higher than anticipated.

Simplifying metal-'ate' chemistry: formation and comprehensive characterisation of a homo-metallic amido lithiate complex

Addition of TMEDA to lithium allyl-1-naphthylamide in a 1 : 1 ratio afforded the novel amido lithium/lithiate complex, [Li(TMEDA)2][Li{N(1-naph)(CH2CH[double bond, length as m-dash]CH2)}2]. (7)Li NMR and computational calculations indicate this model to be representative of the solution state, with (1)H and (13)C NMR showing a 1,3-sigmatropic rearrangement. [Li{N(1-naph)(CH2CH[double bond, length as m-dash]CH2)}·Et2O]2, and [Li{N(1-naph) (CH2CH[double bond, length as m-dash]CH2)}·PMDETA] , are presented for comparison.

Lithium pinacolone enolate solvated by hexamethylphosphoramide

We report the crystal structure of a substoichiometric, HMPA-trisolvated lithium pinacolone enolate tetramer (LiOPin)4·HMPA3 abbreviated as T3. In this tetramer one HMPA binds to lithium more strongly than the other two causing a reduction in spatial symmetry with corresponding loss of C3 symmetry. A variety of NMR experiments, including HMPA titration, diffusion coefficient-formula weight (D-FW) analysis, and other multinuclear one- and two-dimensional NMR techniques reveal that T3 is the major species in hydrocarbon solution when more than 0.6 equiv of HMPA is present. Due to a small amount of moisture from HMPA or air leaking into the solution, a minor complex was identified and confirmed by X-ray diffraction analysis as a mixed aggregate containing enolate, lithium hydroxide, and HMPA in a 4:2:4 ratio, [(LiOPin)4·(LiOH)2·HMPA4], that we refer to as pseudo-T4. A tetra-HMPA-solvated lithium cyclopentanone enolate tetramer was also prepared and characterized by X-ray diffraction, leading to the conclusion that steric effects dominate the formation and solvation of the pinacolone aggregates. An unusual mixed aggregate consisting of pinacolone enolate, lithium diisopropyl amide, lithium oxide, and HMPA in the ratio 5:1:1:2 is also described.

Structure determination using the method of continuous variation: lithium phenolates solvated by protic and dipolar aprotic ligands

The method of continuous variation (MCV) was used in conjunction with (6)Li NMR spectroscopy to characterize four lithium phenolates solvated by a range of solvents, including N,N,N',N'-tetramethylethylenediamine, Et2O, pyridine, protic amines, alcohols, and highly dipolar aprotic solvents. Dimers, trimers, and tetramers were observed, depending on the precise lithium phenolate-solvent combinations. Competition experiments (solvent swaps) provide insights into the relative propensities toward mixed solvation.

A hetero-alkali-metal version of the utility amide LDA: lithium-potassium diisopropylamide

Designed to extend the synthetically important alkali-metal diisopropylamide [N(i)Pr(2); DA] class of compounds, the first example of a hetero-alkali-metallic complex of DA has been prepared as a partial TMEDA solvate. Revealed by an X-ray crystallographic study, its structure exists as a discrete lithium-rich trinuclear Li(2)KN(3) heterocycle, with TMEDA only solvating the largest of the alkali-metals, with the two-coordinate lithium atoms being close to linearity [161.9(2)°]. A variety of NMR spectroscopic studies, including variable temperature and DOSY NMR experiments, suggests that this new form of LDA maintains its integrity in non-polar hydrocarbon solution. This complex thus represents a rare example of a KDA molecule which is soluble in non-polar medium without the need for excessive amounts of solubilizing Lewis donor being added.

Developing a hetero-alkali-metal chemistry of 2,2,6,6-tetramethylpiperidide (TMP): stoichiometric and structural diversity within a series of lithium/sodium, lithium/potassium and sodium/potassium TMP compounds

Studied extensively in solution and in the solid state, Li(TMP) (TMP=2,2,6,6-tetramethylpiperidide) is an important utility reagent popular as a strongly basic, weakly nucleophilic tool for C-H metallation. Recently, there has been a surge in interest in mixed metal derivatives containing the bulky TMP anion. Herein, we start to develop hetero (alkali metal) TMP chemistry by reporting the N,N,N',N'-tetramethylethylenediamine (TMEDA)-hemisolvated sodium-lithium cycloheterodimer [(tmeda)Na(μ-tmp)(2) Li], and its TMEDA-free variant [{Na(μ-tmp)Li(μ-tmp)}(∞)], which provides a rare example of a crystallographically authenticated polymeric alkali metal amide. Experimental observations suggest that the former is a kinetic intermediate en route to the latter thermodynamic product. Furthermore, a third modification, the mixed potassium-lithium-rich cycloheterotrimer [(tmeda)K(μ-tmp)Li(μ-tmp)Li(μ-tmp)], has also been synthesised and crystallographically characterised. On moving to the bulkier tridentate donor N,N,N',N'',N''-pentamethyldiethylenediamine (PMDETA), the additional ligation forces the sodium-lithium and potassium-dilithium ring species to open giving the acyclic arc-shaped complexes [(pmdeta)Na(μ-tmp)Li(tmp)] and [(pmdeta)K(μ-tmp)Li(μ-tmp)Li(tmp)], respectively. Completing the series, the potassium-lithium and potassium-sodium derivatives [(pmdeta)K(μ-tmp)(2) M] (M=Li, Na) have also been isolated as closed structures with a distinctly asymmetric central MN(2) K ring. Collectively, these seven new bimetallic compounds display five distinct structural motifs, four of which have never hitherto been witnessed in TMP chemistry and three of which are unprecedented in the vast structural library of alkali metal amide chemistry.

Synthesis of inherently chiral calix[4]arenes: stereocontrol through ligand choice

Employing a chiral oxazoline as an ortholithiation directing group allows the synthesis of inherently chiral calix[4]arenes suitable for elaboration into planar chiral molecules. An important finding has been that the diastereoselectivity of the reaction can be tuned by the choice of additive. These results have bearing on the elucidation of the general mechanism of oxazoline-directed ortholithiation.

Synthesis of a 7-azaindole by chichibabin cyclization: reversible base-mediated dimerization of 3-picolines

The lithium diisopropylamide (LDA)-mediated condensation of 2-fluoro-3-picoline and benzonitrile to form 2-phenyl-7-azaindole via a Chichibabin cyclization is described. Facile dimerization of the picoline via a 1,4-addition of the incipient benzyllithium to the picoline starting material and fast 1,2-addition of LDA to benzonitrile cause the reaction to be complex. Both adducts are shown to reenter the reaction coordinate to produce the desired 7-azaindole. The solution structures of the key intermediates and the underlying reaction mechanisms are studied by a combination of IR and NMR spectroscopies.

Anionic Snieckus-Fries rearrangement: solvent effects and role of mixed aggregates

Lithiated aryl carbamates (ArLi) bearing methoxy or fluoro substituents in the meta position are generated from lithium diisopropylamide (LDA) in THF, n-BuOMe, Me2NEt, dimethoxyethane (DME), N,N,N',N'-tetramethylethylenediamine (TMEDA), N,N,N',N'-tetramethylcyclohexanediamine (TMCDA), and hexamethylphosphoramide (HMPA). The aryllithiums are shown with (6)Li, (13)C, and (15)N NMR spectroscopies to be monomers, ArLi-LDA mixed dimers, and ArLi-LDA mixed trimers, depending on the choice of solvent. Subsequent Snieckus-Fries rearrangements afford ArOLi-LDA mixed dimers and trimers of the resulting phenolates. Rate studies of the rearrangement implicate mechanisms based on monomers, mixed dimers, and mixed trimers.

Lithium diisopropylamide-mediated reactions of imines, unsaturated esters, epoxides, and aryl carbamates: influence of hexamethylphosphoramide and ethereal cosolvents on reaction mechanisms

Several reactions mediated by lithium diisopropylamide (LDA) with added hexamethylphosphoramide (HMPA) are described. The N-isopropylimine of cyclohexanone lithiates via an ensemble of monomer-based pathways. Conjugate addition of LDA/HMPA to an unsaturated ester proceeds via di- and tetra-HMPA-solvated dimers. Deprotonation of norbornene epoxide by LDA/HMPA proceeds via an intermediate metalated epoxide as a mixed dimer with LDA. Ortholithiation of an aryl carbamate proceeds via a mono-HMPA-solvated monomer-based pathway. Dependencies on THF and other ethereal cosolvents suggest that secondary-shell solvation effects are important in some instances. The origins of the inordinate mechanistic complexity are discussed.

Structure and reaction pathway of TMP-Zincate: amido base or alkyl base?

The novel directed ortho metalation (DoM) reagents for functionalized aromatic rings, TMP-Zn-ates (R2Zn(TMP)Li (R = Me, 1; tBu, 2)), have been reported to be synthetically useful for the chemo- and regioselective construction of multi-functionalized aromatic compounds. Here, we present the first comprehensive structural and mechanistic investigation by means of X-ray, NMR, and DFT studies on the DoM reaction employing our original TMP-Zn-ate base. The structures of TMP-Zn-ates in solution and in the solid state were determined. The DFT study strongly suggested that the deprotonation involving the TMP ligand on the TMP-Zn-ate is kinetically more favorable than that involving the alkyl ligand, and this view was supported by monitoring of the 13C NMR spectrum of the reaction mixture.

Lithium diisopropylamide: solution kinetics and implications for organic synthesis

Lithium diisopropylamide (LDA) is a prominent reagent used in organic synthesis. In this Review, rate studies of LDA-mediated reactions are placed in the broader context of organic synthesis in three distinct segments. The first section provides a tutorial on solution kinetics, emphasizing the characteristic rate behavior caused by dominant solvation and aggregation effects. The second section summarizes substrate- and solvent-dependent mechanisms that reveal basic principles of solvation and aggregation. The final section suggests how an understanding of mechanism might be combined with empirical methods to optimize yields, rates, and selectivities of organolithium reactions and applied to organic synthesis.

Aggregation of Alkyllithiums in Tetrahydrofuran

Density functional theory was used to examine the solvation number and aggregation state of several alkyllithium compounds in clusters with tetrahydrofuran molecules coordinated to each lithium atom. We then made the microsolvation approximation and approximated the bulk free energy of solvation by the free energy of clustering with solvent molecules in the gas phase. The trends in the computed results are in reasonable agreement with the available experimental data.

An Aluminum Ate Base: Its Design, Structure, Function, and Reaction Mechanism

An aluminum ate base, i-Bu(3)Al(TMP)Li, has been designed and developed for regio- and chemoselective direct generation of functionalized aromatic aluminum compounds. Direct alumination followed by electrophilic trapping with I(2), Cu/Pd-catalyzed C-C bond formation, or direct oxidation with molecular O(2) proved to be a powerful tool for the preparation of 1,2- or 1,2,3-multisubstituted aromatic compounds. This deprotonative alumination using i-Bu3Al(TMP)Li was found to be effective in aliphatic chemistry as well, enabling regio- and chemoselective addition of functionalized allylic ethers and carbamates to aliphatic and aromatic aldehydes. A combined multinuclear NMR spectroscopy, X-ray crystallography, and theoretical study showed that the aluminum ate base is a Li/Al bimetallic complex bridged by the nitrogen atom of TMP and the alpha-carbon of an i-Bu ligand and that the Li exclusively serves as a recognition point for electronegative functional groups or coordinative solvents. The mechanism of directed ortho alumination reaction of functionalized aromatic compounds has been studied by NMR and in situ FT-IR spectroscopy, X-ray analysis, and DFT calculation. It has been found that the reaction proceeds with facile formation of an initial adduct of the base and aromatic, followed by deprotonative formation of the functionalized aromatic aluminum compound. Deprotonation by the TMP ligand rather than the isobutyl ligand was suggested and reasoned by means of spectroscopic and theoretical study. The remarkable regioselectivity of the ortho alumination reaction was explained by a coordinative approximation effect between the functional groups and the counter Li(+) ion, enabling stable initial complex formation and creation of a less strained transition state structure.

Lithium Diisopropylamide Solvated by Hexamethylphosphoramide: Substrate-Dependent Mechanisms for Dehydrobrominations

Lithium diisopropylamide-mediated dehydrobrominations of exo-2-bromonorbornane, 1-bromocyclooctene, and cis-4-bromo-tert-butylcyclohexane were studied in THF solutions and THF solutions with added hexamethylphosphoramide (HMPA). Rate studies reveal a diverse array of mechanisms based on mono-, di-, and trisolvated monomers as well as triple ions. The results are contrasted with analogous eliminations in THF in the absence of HMPA.

Lithium Diisopropylamide-Mediated Enolization: Catalysis by Hemilabile Ligands

Structural, kinetic, and computational studies reveal the mechanistic complexities of a lithium diisopropylamide (LDA)-mediated ester enolization. Hemilabile amino ether MeOCH2CH2NMe2, binding as an eta1 (ether-bound) ligand in the reactant and as an eta2 (chelating) ligand in the transition structure, accelerates the enolization 10,000-fold compared with n-BuOMe. At the onset of the reaction, a dimer-based enolization prevails. As the reaction proceeds, significantly less reactive LDA-enolate mixed dimers appear and divert the reaction through monomer- and mixed dimer-based pathways. The mechanistic and computational investigations lead to a proof-of-principle ligand-catalyzed enolization in which an ancillary ligand allows the catalytic ligand to re-enter the catalytic cycle.

7Li, 31P, and 1H pulsed gradient spin-echo (PGSE) diffusion NMR spectroscopy and ion pairing: on the temperature dependence of the ion pairing in Li(CPh3), fluorenyllithium, and Li[N(SiMe3)2] amongst other salts

7Li, 31P, and 1H variable-temperature pulsed gradient spin-echo (PGSE) diffusion methods have been used to study ion pairing and aggregation states for a range of lithium salts such as lithium halides, lithium carbanions, and a lithium amide in THF solutions. For trityllithium (2) and fluorenyllithium (9), it is shown that ion pairing is favored at 299 K but the ions are well separated at 155 K. For 2-lithio-1,3-dithiane (13) and lithium hexamethyldisilazane (LiHMDS 16), low-temperature data show that the ions remain together. For the dithio anion 13, a mononuclear species has been established, whereas for the lithium amide 16, the PGSE results allow two different aggregation states to be readily recognized. For the lithium halides LiX (X = Br, Cl, I) in THF, the 7Li PGSE data show that all three salts can be described as well-separated ions at ambient temperature. The solid state structure of trityllithium (2) is described and reveals a solvent-separated ion pair formed by a [Li(thf)4]+ ion and a bare triphenylmethide anion.

Solution Structure and Chelation Properties of 2-Thienyllithium Reagents

[reaction: see text] The solution and chelation properties of 2-thienyllithium reagents with potential amine and ether chelating groups in the 3-position and related model systems have been investigated using low temperature 6Li, 7Li, 13C, and 31P NMR spectroscopy, 15N-labeling, and the effect of solvent additives. In THF-ether mixtures at low temperature 3-(N,N-dimethylaminomethyl)-2-thienyllithium (4) is ca. 99% dimer (which is chelated) and 1% monomer (unchelated), whereas 3-(methoxymethyl)-2-thienyllithium (5) is <10% dimer. Compound 5 crystallizes as a THF-solvated dimer, but there is no indication that the ether side chain is chelated in solution. Both 4 and 5 form PMDTA-complexed monomers almost stoichiometrically, similar to the model compound 2, in sharp contrast to phenyl analogues, which show very different behavior. The barriers to dimer interconversion are ca. 2 kcal/mol lower and chelation is significantly weaker in the 2-thienyllithium reagents than in their phenyl analogues.

Easy Access to 3- or 5-Heteroarylamino-1,2,4-triazines by SNAr, SNH, and Palladium-Catalyzed N-Heteroarylations

In this paper, N-arylations between two heteroaryl compounds were studied. Conditions were found to generate selectively either 3- or 5-heteroarylamino-1,2,4-triazines by investigating anionic processes (use of bases such as 2,2',6,6'-tetramethylpiperidine/tBuOK/nBuLi) or Pd-catalyzed N-arylations [Pd(OAc)(2), xantphos]. These methods were successfully applied to a wide variety of heteroarylamines and allowed us to pursue our work on fused polynitrogen compounds synthesis.

Structure, Bonding, and Solvation of Dilithiodiamines

Computational methods were used to determine the structure of dilithiodiamines and the effects of solvation by ethereal solvents. Solvation was examined by the use of microsolvation with explicit dimethyl ether or THF ligands and by the combined use of microsolvation and the IEFPCM continuum solvent model. It was determined that each of the compounds studied exists exclusively as a bridged intramolecular dimer, both in the gas phase and in solution. Thermodynamic properties were calculated at 200 and 298 K to estimate the effect of temperature on the cyclization energies. Infrared spectroscopy was used to confirm the proposed intramolecular dimer structures.

7Li,31P Shift correlation. Application to the structural assignment of benzyllithium complexes of N-methyl-N-benzylphosphinamide

A correlation experiment between (7)Li and (31)P nuclei through scalar coupling is described for the first time. The utility of the method is demonstrated by identifying the species formed in the benzylic lithiation of N-benzyl-N-methyldiphenylphosphinamide in Et(2)O solution.

Lithium 2,2,6,6-Tetramethylpiperidide-Mediated α- and β-Lithiations of Epoxides: Solvent-Dependent Mechanisms

Lithium 2,2,6,6-tetramethylpiperidide (LiTMP)-mediated alpha- and beta-lithiations of epoxides are described. LiTMP displays a markedly higher reactivity than does lithium diisopropylamide, consistent with literature reports. Detailed rate studies of LiTMP/THF and LiTMP/Me(2)NEt mixtures reveal similar rates but significant mechanistic differences. LiTMP-mediated alpha-lithiation of cis-cyclooctene oxide with subsequent oxacarbenoid formation and transannular C-H insertion proceeds via monosolvated dimers in both THF and Me(2)NEt. LiTMP-mediated beta-lithiation of 2,3-dimethyl-2-butene oxide affords the corresponding allylic alcohol via a monosolvated monomer in THF and a monosolvated dimer in Me(2)NEt. We discuss how the solvent-dependent aggregation of LiTMP markedly influences the rate profile. The reaction transition structures are examined with density functional computations.

Ketone Enolization by Lithium Hexamethyldisilazide: Structural and Rate Studies of the Accelerating Effects of Trialkylamines

Mechanistic studies of the enolization of 2-methylcyclohexanone mediated by lithium hexamethyldisilazide (LiHMDS; TMS2NLi) in toluene and toluene/amine mixtures are described. NMR spectroscopic studies of LiHMDS/ketone mixtures in toluene reveal the ketone-complexed cyclic dimer (TMS2NLi)2(ketone). Rate studies using in situ IR spectroscopy show the enolization proceeds via a dimer-based transition structure, [(TMS2NLi)2(ketone)]++. NMR spectroscopic studies of LiHMDS/ketone mixtures in the presence of relatively unhindered trialkylamines such as Me2NEt reveal the quantitative formation of cyclic dimers of general structure (TMS2NLi)2(R3N)(ketone). Rate studies trace a >200-fold rate acceleration to a dimer-based transition structure, [(TMS2NLi)2(R3N)(ketone)]++. Amines of intermediate steric demand, such as Et3N, are characterized by recalcitrant solvation, saturation kinetics, and exceptional (>3000-fold) accelerations traced to the aforementioned dimer-based pathway. Amines of high steric demand, such as i-Pr2NEt, do not observably solvate (TMS2NLi)2(ketone) but mediate enolization via [(TMS2NLi)2(R3N)(ketone)]++ with muted accelerations. The most highly hindered amines, such as i-Bu3N, do not influence the LiHMDS structure or the enolization rate. Overall, surprisingly complex dependencies of the enolization rates on the structures and concentrations of the amines derive from unexpectedly simple steric effects. The consequences of aggregation, mixed aggregation, and substrate-base precomplexation are discussed.

Aggregation and Reactivity of the Cesium Enolate of 6-Phenyl-α-tetralone: Comparison with the Lithium Enolate1

The cesium enolate of 6-phenyl-alpha-tetralone (CsPAT) has a lambda(max) in THF at about 387 nm, but the variation with concentration is too small for application of singular value decomposition. Proton-transfer studies with several indicators show that CsPAT forms monomer-tetramer mixtures with a tetramerization equilibrium constant, K(1,4) = 2.3 x 10(11) M(-3). The pK of the monomer is 23.39 on a scale where fluorene is assigned 22.9 (per hydrogen). For comparison, the lithium enolate, LiPAT, is also a monomer-tetramer with K(1,4) = 4.7 x 10(10) M(-3) and a monomer pK = 14.22. HMPA in large amounts promotes dissociation to monomer with both enolates. Ion-pair S(N)2 initial rates were measured for CsPAT with several alkyl halides and with methyl tosylate and compared with other rates with LiPAT. In all cases, the enolate monomers are much more reactive than the aggregates. Reaction of CsPAT with alkyl halides is generally C-alkylation but HMPA promotes increasing amounts of O-alkylation. A new indicator, 11-methyl-11H-benzo[b]fluorene, has a pK on the cesium scale of 23.39.

Solvent effects on the aggregation state of lithium dialkylaminoborohydrides

DFT calculations were performed to determine the effects of ethereal solvents on the aggregation state of lithium dialkylaminoborohydrides (LABs). The calculations included dimerization energies in the gas phase, with continuum solvation only, microsolvation with coordinating ethereal ligands, and a combination of the microsolvation and continuum models. The continuum model alone overestimates the stability of the dimers, apparently due to the lack of steric effects from the coordinating ethereal ligands. The use of the combined microsolvation and continuum solvation models predicts lithium dimethylaminoborohydride to be a mixture of monomer and dimer in THF, and more sterically hindered lithium aminoborohydrides to exist primarily as monomers. The kinetics of amination of 1-chlorodecane by lithium dimethylaminoborohydride showed no detectable change in reaction rate with time, suggesting that the LAB reagent may exist primarily as a monomer in THF.

Study of the lithiated phenylacetonitrile monoanions and dianions formed according to the lithiated base used (LHMDS, LDA, or n-BuLi). 1. Evidence of heterodimer ("Quadac") or dianion formation by vibrational spectroscopy

It is evidenced through vibrational spectroscopy that a heterodimer or "Quadac" is formed when an excess of base (LHMDS, LDA, or n-BuLi) is added to PhCH(2)CN in THF, THF-hexane, or THF-toluene solution. The amount of heterodimer increases with the pK(H)(a) of the lithiated base. A dianionic species may be formed through decomposition of this heterodimer if the pK(H)(a) of the base is sufficiently high, as in the case of n-BuLi. With LDA, only a very small amount of dianion is observed, and with LHMDS, no dianion is detected. The predominant dianionic species observed are the linear and bridged separated ion pairs of the dilithiated dianion. The presence of the amine in the medium is of paramount importance. The PhCHCNLi monomer-dimer equilibrium is entropy driven toward the dimer solvated by the amine.

Amine- and ether-chelated aryllithium reagents-structure and dynamics

Chelation and aggregation in phenyllithium reagents with potential 6- and 7-ring chelating amine (2, 3) and 5-, 6-, and 7-ring chelating ether (4, 5, 6) ortho substituents have been examined utilizing variable temperature (6)Li and (13)C NMR spectroscopy, (6)Li and (15)N isotope labeling, and the effects of solvent additives. The 5- and 6-ring ether chelates (4, 5) compete well with THF, but the 6-ring amine chelate (2) barely does, and 7-ring amine chelate (3) does not. Compared to model compounds (e.g., 2-ethylphenyllithium 7), which are largely monomeric in THF, the chelated compounds all show enhanced dimerization (as measured by K = [D]/[M](2)) by factors ranging from 40 (for 6) to more than 200 000 (for 4 and 5). Chelation isomers are seen for the dimers of 5 and 6, but a chelate structure could be assigned only for 2-(2-dimethylaminoethyl)phenyllithium (2), which has an A-type structure (both amino groups chelated to the same lithium in the dimer) based on NMR coupling in the (15)N, (6)Li labeled compound. Unlike the dimer, the monomer of 2 is not detectably chelated. With the exception of 2-(methoxymethyl)phenyllithium (4), which forms an open dimer (12) and a pentacoordinate monomer (13), the lithium reagents all form monomeric nonchelated adducts with PMDTA.

The regioselectivity of addition of organolithium reagents to enones and enals: the role of HMPA

The role of polar solvents (particularly HMPA) in controlling the ratio of 1,2 to 1,4 addition of sulfur-substituted organolithium reagents to cyclohexenones and hexenal was studied. Low-temperature, multinuclear NMR studies provided quantitative information about the ratio of contact (CIP) and solvent-separated (SIP) ion pairs in solutions of dithianyllithiums and phenylthiobenzyllithiums in THF-HMPA solutions. The ratio of contact and separated ion pairs was manipulated by changes in the strength of solvation (generally through the addition of HMPA). Although the results are consistent with the CIP/SIP distribution being an important factor in determining the regioselectivity of these additions (Curtin-Hammett limitations prevent a direct correlation), it cannot be the only one. Changes in diastereomeric product ratios upon addition of HMPA suggest that complexation of HMPA to lithium has two effects. First, it causes ion pair separation, which enhances 1,4 addition. Second, it lowers the Lewis acidity and catalytic effectiveness of the lithium cation, which also favors 1,4 addition. For most sulfur-stabilized lithium reagents, 2 equiv of HMPA suffice to achieve >95% 1,4 addition, whereas 4 equiv of DMPU are required to achieve identical regiochemical and stereochemical results.

Lithium diisopropylamide: oligomer structures at low ligand concentrations

One- and two-dimensional (6)Li and (15)N NMR spectroscopic studies of lithium diisopropylamide (LDA) solvated by substoichiometric concentrations of oxetane, THF, Et(2)O, and diisopropylamine are described. Partially solvated dimers and trimers are identified. Possible benefits of carrying out organolithium chemistry at low ligand concentrations are discussed.

Chelated aryllithium reagents: ring size and chelating group effects

[figure: see text] Chelation and aggregation in phenyllithium reagents with potential 5-, 6-, and 7-ring chelating ether and amine ortho substituents have been examined utilizing variable-temperature 6Li and 13C NMR spectroscopy, 6Li and 15N isotope labeling, and the effects of solvent additives. Both ether and amine form strong 5-ring chelates; 6-ring ether chelates compete well with THF, but 6-ring amine chelates barely do, and 7-ring amine chelates do not. o-Methoxymethylphenyllithium (4) forms an open dimer (9) and a pentacoordinate monomer with PMDTA (10).

HMPA promotes retro-aldol reaction, resulting in syn-selective addition of lithiated 1-naphthylacetonitrile to aromatic aldehydes

In HMPA-THF solution, lithiated 1-naphthylacetonitrile undergoes highly syn-selective addition to aromatic aldehydes, providing the first access to such syn-aldols. Syn-selectivity is also observed with two other arylacetonitriles. Aldolate equilibration and crossover experiments demonstrate that HMPA promotes retro-aldol reaction and that aldol diastereoselectivity under these conditions is thermodynamically controlled.