Silica-supported, single-site titanium catalysts for olefin epoxidation. A molecular precursor strategy for control of catalyst structure

Stabilisation of molecular TiO4 species on the pore surface of mesoporous silica for photocatalytic H2 evolution

Although molecular tetrahedral Ti-oxo species exhibit unique electronic and photochemical properties due to their discrete energy levels, which are different from those of anatase and rutile, such Ti-oxo species are generally unstable and readily transformed to amorphous/crystalline TiO2 (bulk phases, nanoparticles and clusters) via hydrolysis and condensation. Here, molecular Ti-oxo species were immobilised within mesoporous silica SBA-15 by grafting titanium(IV) oxyacetylacetonate using the surface silanol groups of SBA-15 as a scaffold, followed by chemical etching with dilute hydrochloric acid to form molecular TiO4 species. These Ti species mainly exist as isolated tetrahedrally coordinated structures, as was confirmed by diffuse reflectance UV-vis and Raman spectroscopy. The SBA-15-immobilised molecular TiO4 exhibited higher photocatalytic activity for H2 evolution from an aqueous methanol solution than conventional Ti-incorporated mesoporous silica (Ti-MCM-41) and reference TiO2 (P25).

M-Ge-Si thermolytic molecular precursors and models for germanium-doped transition metal sites on silica

The synthesis, thermolysis, and surface organometallic chemistry of thermolytic molecular precursors based on a new germanosilicate ligand platform, -OGe[OSi(OtBu)3]3, is described. Use of this ligand is demonstrated with preparation of complexes containing the first-row transition metals Cr, Mn, and Fe. The thermolysis and grafting behavior of the synthesized complexes, Fe{OGe[OSi(OtBu)3]3}2 (FeGe), Mn{OGe[OSi(OtBu)3]3}2(THF)2 (MnGe) and Cr{OGe[OSi(OtBu)3]3}2(THF)2 (CrGe), was evaluated using a combination of thermogravimetric analysis; nuclear magnetic resonance (NMR), ultraviolet-visible (UV-Vis), and electron paramagnetic resonance (EPR) spectroscopies; and single-crystal X-ray diffraction (XRD). Grafting of the precursors onto SBA-15 mesoporous silica and subsequent calcination in air led to substantial changes in transition metal coordination environments and oxidation states, the implications of which are discussed in the context of low-coordinate and low oxidation state thermolytic molecular precursors.

Nonthermal Plasma Synthesis of Metallic Ti Nanocrystals

Nanoscale metallic titanium (Ti) offers unique energetic and biocompatible characteristics for the aerospace and biomedical industries. A rapid and sustainable method to form purified Ti nanocrystals is still in demand due to their high oxygen affinity. Herein, we report the production of highly purified Ti nanoparticles with a nonequilibrium face center cubic (FCC) structure from titanium tetrachloride (TiCl4) via a capacitively coupled plasma (CCP) route. Furthermore, we demonstrate a secondary H2 treatment plasma as an effective strategy to improve the air stability of a thin layer of nanoparticles by further removal of chlorine from the particle surface. Hexagonal and cubic-shaped Ti nanocrystals of high purity were maintained in the air after the secondary H2 plasma treatment. The FCC phase potentially originates from small-sized grains in the initial stage of nucleation inside the plasma environment, which is revealed by a size evolution study with variations of plasma power input.

Titanium(IV) Surface Complexes Bearing Chelating Catecholato Ligands for Enhanced Band-Gap Reduction

Protonolysis reactions between dimethylamido titanium(IV) catecholate [Ti(CAT)(NMe₂)₂]₂ and neopentanol or tris(tert-butoxy)silanol gave catecholato-bridged dimers [(Ti(CAT)(OCH₂tBu)₂)(HNMe₂)]₂ and [Ti(CAT){OSi(OtBu)₃}₂(HNMe₂)₂]₂, respectively. Analogous reactions using the dimeric dimethylamido titanium(IV) (3,6-di-tert-butyl)catecholate [Ti(CATtBu₂-3,6)(NMe₂)₂]₂ yielded the monomeric Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂ and Ti(CATtBu₂-3,6)[OSi(OtBu)₃]₂(HNMe₂)₂. The neopentoxide complex Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂ engaged in further protonolysis reactions with Si-OH groups and was consequentially used for grafting onto mesoporous silica KIT-6. Upon immobilization, the surface complex [Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂]@[KIT-6] retained the bidentate chelating geometry of the catecholato ligand. This convergent grafting strategy was compared with a sequential and an aqueous approach, which gave either a mixture of bidentate chelating species with a bipodally anchored Ti(IV) center along with other physisorbed surface species or not clearly identifiable surface species. Extension of the convergent and aqueous approaches to anatase mesoporous titania (m-TiO₂) enabled optical and electronic investigations of the corresponding surface species, revealing that the band-gap reduction is more pronounced for the bidentate chelating species (convergent approach) than for that obtained via the aqueous approach. The applied methods include X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, and solid-state UV/vis spectroscopy. The energy-level alignment for the surface species from the aqueous approach, calculated from experimental data, accounts for the well-known type II excitation mechanism, whereas the findings indicate a distinct excitation mechanism for the bidentate chelating surface species of the material [Ti(CATtBu₂-3,6)(OCH₂tBu)₂(HNMe₂)₂]@[m-TiO₂].

Towards efficient and greener processes for furfural production from biomass: A review of the recent trends

As mentioned in several recent reviews, biomass-based furfural is attracting increasing interest as a feasible alternative for the synthesis of a wide range of non-petroleum-derived compounds. However, the lack of environmentally friendly, cost-effective, and sustainable industrial procedures is still evident. This review describes the chemical and biological routes for furfural production. The mechanisms proposed for the chemical transformation of xylose to furfural are detailed, as are the current advances in the manufacture of furfural from biomass. The main goal is to overview the different ways of improving the furfural synthesis process. A pretreatment process, particularly chemical and physico-chemical, enhances the digestibility of biomass, leading to the production of >70 % of available sugars for the production of valuable products. The combination of heterogeneous (zeolite and polymeric solid) catalyst and biphasic solvent system (water/GVL and water/CPME) is regarded as an attractive approach, affording >75 % furfural yield for over 80 % of selectivity with the possibility of catalyst reuse. Microwave heating as an activation technique reduces reaction time at least tenfold, making the process more sustainable. The state of the art in industrial processes is also discussed. It shows that, when sulfuric acid is used, the furfural yields do not exceed 55 % for temperatures close to 180 °C. However, the MTC process recently achieved an 83 % yield by continuously removing furfural from the liquid phase. Finally, the CIMV process, using a formic acid/acetic acid mixture, has been developed. The economic aspects of furfural production are then addressed. Future research will be needed to investigate scaling-up and biological techniques that produce acceptable yields and productivities to become commercially viable and competitive in furfural production from biomass.

Hetero-bimetallic alkali titanosilicates [MOTi{OSi(OtBu)3}3]2 (M = Li-Cs) with terminal Ti-O- groups

The molecular titanosilicate [(^tBuO₃)₃SiO]₃TiNEt₂ (1) was obtained from the reaction between silanol (^tBuO₃)₃SiOH and titanium amide Ti(NEt₂)₄. The reaction of 1 with alkali metal hydroxides MOH (M = Li, Na, K, Rb, Cs) offers a straightforward route to the alkaline salts of titanosilicates [MOTi{OSi(O^tBu)₃}₃]₂ with a terminal Ti-O^- moiety. All compounds were characterised by single-crystal X-ray diffraction studies. Hirshfeld atom refinement and QTAIM analysis of the electron density in 1 and in the Rb salt 5 revealed the D-A nature of the Ti-O and Ti-N bonds and the presence of agostic C-H⋯Rb interactions.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Support-Activity Relationship in Heterogeneous Catalysis for Biomass Valorization and Fine-Chemicals Production

Heterogeneous catalysts are progressively expanding their field of application, from high-throughput reactions for traditional industrial chemistry with production volumes reaching millions of tons per year, a sector in which they are key players, to more niche applications for the production of fine chemicals. These novel applications require a progressive utilization reduction of fossil feedstocks, in favor of renewable ones. Biomasses are the most accessible source of organic precursors, having as advantage their low cost and even distribution across the globe. Unfortunately, they are intrinsically inhomogeneous in nature and their efficient exploitation requires novel catalysts. In this process, an accurate design of the active phase performing the reaction is important; nevertheless, we are often neglecting the importance of the support in guaranteeing stable performances and improving catalytic activity. This review has the goal of gathering and highlighting the cases in which the supports (either derived or not from biomass wastes) share the worth of performing the catalysis with the active phase, for those reactions involving the synthesis of fine chemicals starting from biomasses as feedstocks.

Bidentate Disilicate Framework for Bis-Grafted Surface Species

Recent advances in surface organometallic chemistry have enabled the detailed characterization of the surface species in single-site heterogeneous catalysts. However, the selective formation of bis-grafted surface species remains challenging because of the heterogeneity of the supporting surface. Herein, we introduce a metal complex bearing bidentate disilicate ligands, -OSi(O^t Bu)₂ OSi(O^t Bu)₂ O-, as a molecular precursor, which has a silicate framework adjacent to the metal (Pt) center. The grafting of the precursors on silica supports (MCM-41 and CARiACT Q10) proceeded through a substitution reaction on the silicon atoms of the disilicate ligand, which was verified by the detection of isobutene and ^t BuOH as the elimination products, to selectively yield bis-grafted surface species. The chemical structure of the surface species was characterized by solid-state NMR, and the chemical shift values of the ancillary ligands and ¹⁹⁵ Pt nuclei suggested that the bidentate coordination sphere was maintained following grafting.

A Brief Overview of Recent Progress in Porous Silica as Catalyst Supports

Porous silica particles have shown applications in various technological fields including their use as catalyst supports in heterogeneous catalysis. The mesoporous silica particles have ordered porosity, high surface area, and good chemical stability. These interesting structural or textural properties make porous silica an attractive material for use as catalyst supports in various heterogeneous catalysis reactions. The colloidal nature of the porous silica particles is highly useful in catalytic applications as it guarantees better mass transfer properties and uniform distribution of the various metal or metal oxide nanocatalysts in solution. The catalysts show high activity, low degree of metal leaching, and ease in recycling when supported or immobilized on porous silica-based materials. In this overview, we have pointed out the importance of porous silica as catalyst supports. A variety of chemical reactions catalyzed by different catalysts loaded or embedded in porous silica supports are studied. The latest reports from the literature about the use of porous silica-based materials as catalyst supports are listed and analyzed. The new and continued trends are discussed with examples.

Functionalized mesoporous SBA-15 silica: recent trends and catalytic applications

The development of advanced materials for heterogeneous catalytic applications requires fine control over the synthesis and structural parameters of the active site. Mesoporous silica materials have attracted increasing attention to be considered as an important class of nanostructured support materials in heterogeneous catalysis. Their large surface area, well-defined porous architecture and ability to incorporate metal atoms within the mesopores lead them to be a promising support material for designing a variety of different catalysts. In particular, SBA-15 mesoporous silica has its broad applicability in catalysis because of its comparatively thicker walls leading to higher thermal and mechanical stability. In this review article, various strategies to functionalize SBA-15 mesoporous silica have been reviewed with a view to evaluating its efficacy in different catalytic transformation reactions. Special attention has been given to the molecular engineering of the silica surface, within the framework and within the hexagonal mesoporous channels for anchoring metal oxides, single-site species and metal nanoparticles (NPs) serving as catalytically active sites.

Grafting metal complexes onto amorphous supports: from elementary steps to catalyst site populationsviakernel regression

We use transition state theory, kernel regression, and population balance modeling techniques to model the grafting of metal complexes onto amorphous catalyst supports.

Direct Visualization of Independent Ta Centers Supported on Two-Dimensional TiO2 Nanosheets

Highly dispersed, supported oxides are ubiquitous solid catalysts but can be challenging to characterize with atomic precision. Here, it is shown that crystalline anatase TiO₂ nanosheets (∼5 nm thick) are ideal supports for imaging highly dispersed active sites. Ta cations were deposited by several routes, and high-resolution high angle annular dark-field scanning transmission electron microscopy was used to determine the location of Ta with respect to the TiO₂ lattice and quantify Ta-Ta distances. In the best case, it is shown that >80% of Ta atoms are isolated from one another, whereas other techniques are blind to this critical catalytic property or give only qualitative estimates. TiO₂ nanosheets may prove to be a useful platform for other types of catalysis studies.

Single-Sites and Nanoparticles at Tailored Interfaces Prepared via Surface Organometallic Chemistry from Thermolytic Molecular Precursors

Heterogeneous catalysts are complex by nature, making particularly difficult to assess the structure of their active sites. Such complexity is inherited in part from their mode of preparation, which typically involves coprecipitation or impregnation of metal salts in aqueous solution, and the associated complex surface chemistries. In this context, surface organometallic chemistry (SOMC) has emerged as a powerful approach to generate well-defined surface species, where the metal sites are introduced by grafting tailored molecular precursors. When combined with thermolytic molecular precursors (TMPs) that can lose their organic moieties quite readily upon thermal treatment, SOMC provides access to supported isolated metal sites with defined oxidation state and nuclearity inherited from the precursor. The resulting surface species bear unusual coordination imposed by the surface that provides them high reactivity in comparison with their molecular precursor. In addition, these molecularly defined species bare strong resemblance with the active sites of supported metal oxides. However, they typically contain a higher proportion of active sites making structure-activity relationship possible. They thus constitute ideal models for this important class of industrial catalysts that are used in numerous applications such as olefin epoxidation (Shell process), olefin metathesis (triolefin process), ethylene polymerization (Phillips catalysts), or propane dehydrogenation (Catofin and related processes). This SOMC/TMP approach can thus provide detailed information about the structure of active sites in industrial catalysts, their mode of initiation and deactivation, as well as the role of the support and specific thermal treatment on the final activity of the catalysts. Nonetheless, these structurally characterized surface sites still exhibit heterogeneous environments borrowed from the support itself, that explain the intrinsic complexity of heterogeneous catalysis. Furthermore, SOMC/TMP can also be used to generate and investigate supported metal nanoparticles. Starting from the well-defined isolated sites, that also contain adjacent surface OH groups, one can graft a second metal and then generate after treatment under hydrogen small and narrowly dispersed alloys or nanoparticles with tailored interfaces that can show improved catalytic performances and are amiable to detailed structure-activity relationships. This approach is illustrated by two case studies: (1) formation of supported copper nanoparticles at tailored interfaces that contain isolated metal sites for the selective hydrogenation of carbon dioxide to methanol, allowing for a detailed understanding of the role of dopants and supports in heterogeneous catalysis, and (2) preparation of highly selective and productive propane dehydrogenation catalysts based on silica-supported Pt _xGa _y alloy. Overall, this Account shows how the combination of SOMC and TMP helps to generate catalysts, particularly suited for elucidating structural characterization of active sites at a molecular-level which in turn enables structure-activity relationship to be drawn. Such detailed information obtained on well-defined catalysts can then be used to understand complex effects observed in industrial catalysts (effects of supports, additives, dopants, etc.), and to extract information that can then be used to improve them in a more rational way.

Oxygen transfer in electrophilic epoxidation probed by 17O NMR: differentiating between oxidants and role of spectator metal oxo

Peroxide compounds are used both in laboratory and industrial processes for the electrophilic epoxidation of olefins. Using NMR-spectroscopy, we investigate why certain peroxides engage in this type of reaction while others require activation by metal catalysts, e.g. methyltrioxorhenium (MTO). More precisely, an analysis of ¹⁷O NMR chemical shift and quadrupolar coupling parameters provides insights into the relative energy of specific frontier molecular orbitals relevant for reactivity. For organic peroxides or H₂O₂ a large deshielding is indicative of an energetically high-lying lone-pair on oxygen in combination with a low-lying σ*(O-O) orbital. This feature is particularly pronounced in species that engage in electrophilic epoxidation, such as peracids or dimethyldioxirane (DMDO), and much less pronounced in unreactive peroxides such as H₂O₂ and ROOH, which can however be activated by transition-metal catalysts. In fact, for the proposed active peroxo species in MTO-catalyzed electrophilic epoxidation with H₂O₂ an analysis of the ¹⁷O NMR chemical shift highlights specific π- and δ-type orbital interactions between the so-called metal spectator oxo and the peroxo moieties that raise the energy of the high-lying lone-pair on oxygen, thus increasing the reactivity of the peroxo species.

Novel luminescent lanthanide(iii) hybrid materials: fluorescence sensing of fluoride ions and N,N-dimethylformamide

Two novel luminescent organic-inorganic hybrid materials, Ln(L-SBA15)3phen (Ln = Eu, Tb), were designed and synthesized. The organic ligand phenylurea was modified by the silane coupling agent 3-(triethoxysilyl)propyl isocyanate (TESPIC) to form a precursor (L), which was covalently bonded onto a mesoporous SBA-15 backbone to form mesoporous L-SBA15 through co-hydrolysis and co-condensation reactions. 1,10-Phenanthroline monohydrate (phen) was selected as the second ligand to improve the luminescence of the final products, and the two mesoporous hybrid materials Ln(L-SBA15)3phen were obtained after the coordination reaction between the organic ligands (phen and L-SBA15) and Ln(iii) ions. Both the mesoporous hybrid materials were examined by Fourier transform infrared spectroscopy, transmission electron microscopy, small-angle X-ray diffraction, N2 adsorption-desorption curves, and photoluminescence spectroscopy. The results show that both the hybrid materials showed highly ordered mesoporous structures, high surface areas, and excellent photophysical properties (long luminescence lifetimes and high quantum efficiencies). Furthermore, the fluorescence sensing properties of the materials were investigated systematically, and the hybrid materials were revealed to be promising examples of dual functional materials with good ability to sense fluoride ions and a small organic molecule N,N-dimethylformamide.

Surface organometallic chemistry in heterogeneous catalysis

Surface organometallic chemistry has been reviewed with a special focus on environmentally relevant transformations (C–H activation, CO₂conversion, oxidation).

Silica-supported isolated gallium sites as highly active, selective and stable propane dehydrogenation catalysts

Single-site gallium centers on the surface of silica are prepared via grafting of [Ga(OSi(OtBu)3)3(THF)] on SiO2-700 followed by a thermolysis step. The resulting surface species corresponds to well-defined tetra-coordinate gallium single-sites, [([triple bond, length as m-dash]SiO)3Ga(XOSi[triple bond, length as m-dash])] (X = -H or [triple bond, length as m-dash]Si) according to IR, X-ray absorption near-edge structure and extended X-ray absorption fine structure analysis. These gallium sites show high activity, selectivity and stability for propane dehydrogenation with an initial turnover frequency of 20 per h per gallium center, propylene selectivity of ≥93% and remarkable stability over 20 h. The stability of the catalyst probably results from site-isolation of the active site on a non-reducible support such as silica, diminishing facile reduction typical of Ga2O3-based catalysts.

Lewis acidity quantification and catalytic activity of Ti, Zr and Al-supported mesoporous silica

Water-tolerant metal supported Lewis acids were synthesized for the catalytic amidation of electron-poor and bulky amines.