Carbon dioxide-in-water microemulsions

Assembling CdSe Quantum Dots into Polymeric Micelles Formed by a Polyethylenimine-Based Amphiphilic Polymer to Enhance Efficiency and Selectivity of CO2-to-CO Photoreduction in Water

Colloidal quantum dots (QDs) as photocatalysts enable catalysis of CO₂-to-CO conversion in the presence of electron donors. The surface and/or interfacial chemical environment of the QDs is essential for the activity and selectivity of the CO₂ photoreduction. Various strategies, including exposing active metal sites or anchoring functional organic ligands, have been applied to tune the QDs' surface chemical environment and thus to improve both activity and selectivity of CO₂ photoreduction, which occurs at surface of the QDs. However, the efficient and selective photocatalytic CO₂ reduction with QD photocatalysts in water is still a challenging task due to low CO₂ solubility and robust competing reaction of proton reduction in water. Different from state-of-the-art QDs' surface manipulation, we proposed to ameliorate the interfacial chemical environment of CdSe QDs via assembling the QDs into functional polymeric micelles in water. Herein, CdSe@PEI-LA assemblies were constructed by loading CdSe QDs into polymeric micelles formed by PEI-LA, a polyethylenimine (PEI)-based functional amphiphilic polymer. Due to self-assembly and high CO₂ adsorption capacity of PEI-LA in water, the photocatalytic CO₂-to-CO conversion efficiency and selectivity of the CdSe@PEI-LA assemblies in water were dramatically improved to 28.0 mmol g^-1 and 87.5%, respectively. These two values increased 57 times and 1.5 times, respectively, compared with those of the pristine CdSe QDs. Mechanism studies revealed that CdSe QDs locate in polymeric micelles of high CO₂ local concentration and the photoinduced electron transfer from the conduction band of CdSe QDs to Cd-CO₂* species is thermodynamically and kinetically improved in the presence of PEI-LA. The CdSe@PEI-LA system represents a successful example of using a functionalized amphiphilic polymer to ameliorate interfacial microenvironments of nanocrystal photocatalysts and realizing efficient and selective CO₂ photoreduction in water.

Ultradry Carbon Dioxide-in-Water Foams with Viscoelastic Aqueous Phases

For foams with ultra low water contents, the capillary pressure is very large and induces rapid drainage that destabilizes the aqueous lamellae between the gas bubbles. However, we show that high-pressure CO2-in-water foams can be stabilized with a viscoelastic aqueous phase composed of entangled wormlike micelles, even for extremely high CO2 volume fractions ϕ of 0.95 to 0.98; the viscosity of these ultradry foams increased by up to 3-4-fold, reaching more than 100 cP relative to foams formed with conventional low viscosity aqueous phases. The foam morphology consisted of fine ∼20 μm polyhedral-shaped CO2 bubbles that were stable for hours. The wormlike micelles were formed by mixing anionic sodium lauryl ether sulfate (SLES) with salt and a protonated cationic surfactant, as shown by cryogenic transmission electron microscopy (cryo-TEM) and large values of the zero-shear viscosity and the dynamic storage and loss moduli. With the highly viscous continuous aqueous phases, the foam lamella drainage rates were low, as corroborated by confocal microscopy. The preservation of viscous thick lamellae resulted in lower rates of Ostwald ripening relative to conventional foams as shown by high-pressure optical microscopy. The ability to stabilize viscous ultra high internal phase foams is expected to find utility in various practical applications, including nearly "waterless" fracturing fluids for recovery of oil and gas in shale, offering the possibility of a massive reduction in the amount of wastewater.

Surfactant-free CO2-based microemulsion-like systems

The presence of water-rich and water-lean nanodomains in a transparent, pressurized "water-acetone-CO2" mixture was revealed by Raman spectroscopy. This nano-structured liquid can be classified as a surfactant-free microemulsion-like system and has the capacity to dissolve hydrophobic compounds, such as ibuprofen, in the presence of large amounts of water. This finding opens new opportunities in the fields of confined reactions and material templating.

Performance of the Biocompatible Surfactant Tween 80, for the Formation of Microemulsions Suitable for New Pharmaceutical Processing

The aim of this work was to investigate the phase behaviour and the structure of the n-hexane/water emulsions based on a nonionic, nontoxic and biocompatible surfactant, Tween 80. This system is of interest for new pharmaceutical techniques based on supercritical fluids to form nano- and encapsulated particles. However, it showed a lack of stability denoted by large areas of macroemulsion. For this reason, the effect of additives (alcohols and brine) and external variables (temperature) were explored. The replacement of water by brine caused negligible impact due to the nonionic character of Tween 80. On the contrary, the presence of an alcohol (ethanol or 1-butanol) enhanced the solubility of the surfactant in the oil phase and decreased the mixture viscosity, resulting in improved surface activity. Similar results were obtained by raising the temperature until the cloud point was reached (60°C). With these modifications, microemulsions at relatively low concentrations of surfactant (around 30%) and within a broad interval of compositions could be obtained, widening their possible use in pharmaceuticals manufacturing (such as controlled drug delivery, enzymatic reactions, or excipient processing). The understanding of the surfactant performance could be further used to substitute the n-hexane by a greener solvent, such as supercritical CO2.

Supercritical or compressed CO2 as a stimulus for tuning surfactant aggregations

Surfactant assemblies have a wide range of applications in areas such as the chemical industry, material science, biology, and enhanced oil recovery. From both theoretical and practical perspectives, researchers have focused on tuning the aggregation behaviors of surfactants. Researchers commonly use solid and liquid compounds such as cosurfactants, acids, salts, and alcohols as stimuli for tuning the aggregation behaviors. However, these additives can present economic and environmental costs and can contaminate or modify the product. Therefore researchers would like to develop effective methods for tuning surfactant aggregation with easily removable, economical, and environmentally benign stimuli. Supercritical or compressed CO(2) is abundant, nontoxic, and nonflammable and can be recycled easily after use. Compressed CO(2) is quite soluble in many liquids, and the solubility depends on pressure and temperature. Therefore researchers can continuously influence the properties of liquid solvents by controlling the pressure or temperature of CO(2). In this Account, we briefly review our recent studies on tuning the aggregation behaviors of surfactants in different media using supercritical or compressed CO(2). Supercritical or compressed CO(2) serves as a versatile regulator of a variety of properties of surfactant assemblies. Using CO(2), we can switch the micellization of surfactants in water, adjust the properties of reverse micelles, enhance the stability of vesicles, and modify the switching transition between different surfactant assemblies. We can also tune the properties of emulsions, induce the formation of nanoemulsions, and construct novel microemulsions. With these CO(2)-responsive surfactant assemblies, we have synthesized functional materials, optimized chemical reaction conditions, and enhanced extraction and separation efficiencies. Compared with the conventional solid or liquid additives, CO(2) shows some obvious advantages as an agent for modifying surfactant aggregation. We can adjust the aggregation behaviors continuously by pressure and can easily remove CO(2) without contaminating the product, and the method is environmentally benign. We can explain the mechanisms for these effects on surfactant aggregation in terms of molecular interactions. These studies expand the areas of colloid and interface science, supercritical fluid science and technology, and chemical thermodynamics. We hope that the work will influence other fundamental and applied research in these areas.

Formulation and characterization of Brucea javanica oil microemulsion for improving safety

OBJECTIVE

This study engaged in investigation of optimal formulation, characteristics analysis of Brucea javanica oil microemulsion (BJOM) in order to address safety concerns and make recommendations for improvements in BJOM safety during clinical use in vivo.

METHODS

Pseudo-ternary phase diagram techniques were used to determine the appropriate ratio of surfactant, cosurfactant and oil phases. Subsequent stability testing of BJOM was performed by dilution, centrifugation and accelerated stability testing. The results were expounded through additional assessment utilizing the classical thermostat method to establish the shelf life of the material. These results were utilized to evaluate the safety of BJOM by haemolytic, irritative and allergic testing in vitro. In addition, the cytotoxicity of BJOM was examined using the tetrazolium salt 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), with particular emphasis given to potential uses in cancer treatment.

RESULTS

The most suitable method of preparation for BJOM was found to be a one to one ratio (Km 1:1) of Solutol HS15 surfactant matched with sorbitol cosurfactant in the ratio. The microemulsion droplets of BJOM possessed a spherical shape, uniform size and average diameter of 23.8 nm. The expiration date of BJOM was found to be 568 d. The safety study demonstrated no hemolysis activity at the experimental BJOM concentrations; however, mild hemolysis was observed at higher concentrations of Brucea javanica oil emulsion (BJOE), a common commercially available product. Irritation observed upon BJOM treatment can be primarily attributed to Brucea javanica oil (BJO) with little influence of BJOM excipients. In addition, BJOM caused no observed hypersensitivity or other visible allergic reactions in guinea pigs. The anticancer activity curves of BJOM and BJOE demonstrate that both BJOM and BJOE inhibit Hela cells, with BJOM demonstrating significantly more dramatic anticancer activity.

CONCLUSION

An optimal formulation of BJOM superior to commercially available products and safe for medical application such as intravenous injection has been outlined along with its anticancer activity rating.

Processing of surfactant templated nano-structured silica films using compressed carbon dioxide as interpreted from in situ fluorescence spectroscopy

The local environment and dynamics of compressed carbon dioxide (CO(2)) penetration in surfactant templated silica film synthesis is interpreted from the in situ fluorescence emission spectra of pyrene (Py) and a modified pyrene probe. Pyrene emission in cetyltrimethylammonium bromide (CTAB) and cetylpyridinium bromide (CPB) templated silica films is monitored immediately after casting and during processing with gaseous and supercritical (sc) CO(2) (17-172 bar, 45 °C). The solvatochromic emission spectra of pyrene in CTAB templated films suggest CO(2) penetration in both the micelle interface and its interior. An anchored derivative of pyrene, 1-pyrenehexadecanoic acid (C(16)-pyr), is established for probing CPB films, where the pyrene moiety is preferentially oriented toward the micelle interior, thus limiting quenching by the pyridinium headgroup of CPB. CO(2) processing of CPB templated silica films results in an increase in the time scale for probe mobility, suggesting an increased time scale of silica condensation through CO(2) processing. The mobility of C(16)-pyr increases with pressure from gaseous to sc CO(2) processing and persists for over 5 h for sc CO(2) processing at 172 bar and 45 °C compared to about 25 min for the unprocessed film. The delivery of CO(2) soluble solutes to specific regions of surfactant templated mesoporous materials is examined via the nonradiative energy transfer (NRET) between pyrene and CO(2)-solubilized naphthalene.

Morphology and stability of CO2-in-water foams with nonionic hydrocarbon surfactants

The morphologies, stabilities, and viscosities of high-pressure carbon dioxide-in-water (C/W) foams (emulsions) formed with branched nonionic hydrocarbon surfactants were investigated by in situ optical microscopy and capillary rheology. Over two dozen hydrocarbon surfactants were shown to stabilize C/W foams with Sauter mean bubble diameters as low as 1 to 2 microm. Coalescence of the C/W foam bubbles was rare for bubbles larger than about 0.5 microm over a 60 h time frame, and Ostwald ripening became very slow. By better blocking of the CO(2) and water phases with branched and double-tailed surfactants, the interfacial tension decreases, the surface pressure increases, and the C/W foams become very stable. For branched surfactants with propylene oxide middle groups, the stabilities were markedly lower for air/water foams and decane-water emulsions. The greater stability of the C/W foams to coalescence may be attributed to a smaller capillary pressure, lower drainage rates, and a sufficient surface pressure and thus limiting surface elasticity, plus small film sizes, to hinder spatial and surface density fluctuations that lead to coalescence. Unexpectedly, the foams were stable even when the surfactant favored the CO(2) phase over the water phase, in violation of Bancroft's rule. This unusual behavior is influenced by the low drainage rate, which makes Marangoni stabilization of less consequence and the strong tendency of emerging holes in the lamella to close as a result of surfactant tail flocculation in CO(2). The high distribution coefficient toward CO(2) versus water is of significant practical interest for mobility control in CO(2) sequestration and enhanced oil recovery by foam formation.

Tailoring Porous Silica Films through Supercritical Carbon Dioxide Processing of Fluorinated Surfactant Templates

The tailoring of porous silica thin films synthesized using perfluoroalkylpyridinium chloride surfactants as templating agents is achieved as a function of carbon dioxide processing conditions and surfactant tail length and branching. Well-ordered films with 2D hexagonal close-packed pore structure are obtained from sol-gel synthesis using the following cationic fluorinated surfactants as templates: 1-(3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-octyl)pyridinium chloride (HFOPC), 1-(3,3,4,4,5,5,6,6,7,8,8,8-dodecafluoro-7-trifluoromethyl -octyl)pyridinium chloride (HFDoMePC), and 1-(3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluoro-decyl)pyridinium chloride (HFDePC). Processing the sol-gel film with CO2 (69-172 bar, 25 and 45 degrees C) immediately after coating results in significant increases in pore diameter relative to the unprocessed thin films (increasing from 20% to 80% depending on surfactant template and processing conditions). Pore expansion increases with CO2 processing pressure, surfactant tail length, and surfactant branching. The varying degree of CO2 induced expansion is attributed to the solvation of the "CO2-philic" fluorinated tail and is interpreted from interfacial behavior of HFOPC, HFDoMePC, and HFDePC at the CO2-water interface.

Pore size engineering in mesoporous silicas using supercritical CO2

In this paper we investigate the use of supercritical carbon dioxide (sc-CO(2)) for synthesizing calcined mesoporous silicas with tunable pore sizes, wall thickness, and d spacings. Small angle neutron scattering was used to probe the controlled swelling of the triblock copolymer surfactant templating agents, P123 (PEO(20)PPO(69)PEO(20)), P85 (PEO(26)PPO(39)PEO(26)), and F127 (PEO(106)PPO(70)PEO(106)), as a function of CO(2) pressure. The transition from the liquid crystal phase to the calcined mesoporous silicas, formed upon condensation and drying, was also studied in detail. Powder X-ray diffraction, transmission electron microscopy, and nitrogen adsorption techniques were used to establish pore diameters, silica wall widths, and the hexagonal packing of the pores within the calcined silicas. Using a direct templating method, the diameters of mesopores and the spacing between the pores could be tuned with a high level of precision. The swelling process was observed to have no detrimental effects on the quality of silica formed, a distinct advantage over conventional swelling techniques, and all of the silicas synthesized in this study were highly ordered over distances of at least 2000 A.