Counterion-dependent excitonic spectra of tetra(p-carboxyphenyl)porphyrin aggregates in acidic aqueous solution

Supramolecular Chiral Aggregation of Porphyrin Induced by Photo-Generated Triphenylamines Radical Cations

Here, it is shown that photoirradiation triggered chiral J-aggregates formation of an achiral anionic porphyrin, TPPS (tetrakis(4-sulfonatophenyl) porphyrin), in the presence of chiral triphenylamine (TPA) derivatives. A series of chiral triarylamines linked with aromatic rings is designed through urea or amide bonds. UV-irradiation of self-assembled urea-linked triphenylamine derivatives causes the formation of persistent radical cations in the chlorinated solvents, which subsequently induces the aggregation of TPPS. Transferring chirality of TPA derivatives to achiral TPPS J-aggregates leads to the chiral assemblies with remarkable chiroptical signals. The experimental results demonstrate that, TPA derivatives linked by the urea bond can effectively promote the aggregation of TPPS rather than those with the amide bond although the photo-generated radical cations are both produced. It is suggested that the urea-linked TPA derivatives are more favorable to stable radical cations and thus cause the formation of TPPS chiral J-aggregation. This work may open up an avenue for designing photo-modulated chiral supramolecular assemblies.

Spontaneous Molecule Aggregation for Nearly Single-Ion Conducting Sol Electrolyte to Advance Aqueous Zinc Metal Batteries: The Case of Tetraphenylporphyrin

Zn metal as a promising anode of aqueous batteries faces severe challenges from dendrite growth and side reactions. Here, tetraphenylporphyrin tetrasulfonic acid (TPPS) is explored as an electrolyte additive for advanced Zn anodes. It is interesting to note that TPPS spontaneously assembles into unique aggregates. As they adsorb on the Zn anode, the aggregates enhance the resistance to electrolyte percolation and dendrite growth compared to single molecules. Meanwhile, TPPS facilitates anion association in the solvation sheath of Zn2+, and boosts the transference number of Zn2+ up to 0.95. Therefore, anion-related side reactions and anion-induced electrode overpotentials are reduced accordingly. In this context, the electrolyte containing TPPS exhibits excellent electrochemical performance. Even under a high loading of MnO2 (25 mg cm-2), a limited Zn supply (N/P ratio=1.7), and a lean electrolyte (15 μL mAh-1), the full cells still represent a higher cumulative capacity compared to the reported data. The advantages of this electrolyte are also adapted to other cathode materials. The pouch cells of Zn||NaV3O8 ⋅ 1.5H2O realize a capacity of ~0.35 Ah at 0.4 C under harsh conditions.

Photocatalytic H2 Generation: Controlled and Optimized Dispersion of Single Atom Co-Catalysts Based on Pt-TCPP Planar Adsorption on TiO2

When using single atoms (SAs) as a co-catalyst in photocatalytic H2 generation, achieving a well-dispersed, evenly distributed and adjustable SA surface density on a semiconductor surface is a challenging task. In the present work we use the planar adsorption of tetrakis-(4-carboxyphenyl)-porphyrin (TCPP) and its platinum coordinated analogue, Pt-TCPP, onto anatase TiO2 surfaces to establish a spatially controlled decoration of SAs. We show that the surface Pt SA density can be very well controlled by co-adsorption of Pt-TCPP and TCPP in the planar monolayer regime, and by adjusting the Pt-TCPP to TCPP ratio a desired well dispersed surface density of SAs up to 2.6×105  atoms μm-2 can be established (which is the most effective Pt SA loading for photocatalysis). This distribution and the SA state are maintained after a thermal treatment in air, and an optimized SA density as well as a most active form of Pt for photocatalytic H2 evolution can be established and maintained.

Porphyrin-based Bi-MOFs with Enriched Surface Bi Active Sites for Boosting Photocatalytic CO2 Reduction

The inherent challenges in using metal-organic frameworks (MOFs) for photocatalytic CO2 reduction are the combination of wide-range light harvesting, efficient charge separation and transfer as well as highly exposed catalytic active sites for CO2 activation and reduction. We present here a promising solution to satisfy these requirements together by modulating the crystal facet and surface atomic structure of a porphyrin-based bismuth-MOF (Bi-PMOF). The series of structural and photo-electronic characterizations together with photocatalytic CO2 reduction experiment collectively establish that the enriched Bi active sites on the (010) surface prefer to promote efficient charge separation and transfer as well as the activation and reduction of CO2 . Specifically, the Bi-PMOFs-120-F with enriched surface Bi active sites exhibits optimal photocatalytic CO2 reduction performance to CO (28.61 μmol h-1 g-1 ) and CH4 (8.81 μmol h-1 g-1 ). This work provides new insights to synthesize highly efficient main group p-block metal Bi-MOF photocatalysts for CO2 reduction through a facet-regulation strategy and sheds light on the surface structure-activity relationships of the MOFs.

Development of Red-Emissive Porphyrin Graphene Quantum Dots (PGQDs) for Biological Cell-Labeling Applications

Red and near-infrared emission is a highly desirable feature for fluorescent nanoparticles in biological applications mainly due to longer wavelengths more easily being able to deeply penetrate tissues, organs, skin, and other organic components, while less autofluorescence interference would be produced. Additionally, graphene quantum dots (GQDs) that contain unique optical and electrical features have been targeted for their use in cell labeling applications as well as environmental analysis. Their most desirable features come in the form of low toxicity and biocompatibility; however, GQDs are frequently reported to have blue or green emission light and not the more advantageous red/NIR emission light. Furthermore, porphyrins are a subgroup of heterocyclic macrocycle organic compounds that are also naturally occurring pigments in nature that already contain the desired red-emission fluorescence. Therefore, porphyrins have been used previously to synthesize nanomaterials and for nanoparticle doping in order to incorporate the red/NIR emission light property into particles that otherwise do not contain the desired emission light. Meso-tetra(4-carboxyphenyl)porphine (TCPP) is one type of porphyrin with a large conjugated π-electron system and four carboxyl groups on its exterior benzene rings. These two key characteristics of TCPP make it ideal for incorporation into GQDs, as it would design and synthesize red-emissive material as well as give rise to excellent water solubility. In this work, TCPP is used in tangent with cis-cyclobutane-1,2-dicarboxylic acid (CBDA-2), a biomass derived organic molecule, to synthesize "green" porphyrin-based graphene quantum dots (PGQDs) with red-emission. The obtained PGQDs were characterized by various analytical methods. Utilizing TEM, HRTEM, and DLS the size distribution of the particles was determined to be 7.9 ± 4.1, well within the quantum dot range of 2-10 nm. FT-IR, XPS, and XRD depicted carbon, nitrogen, and oxygen as the main elemental components with carbon being in the form of graphene and the main porphyrin ring of TCPP remaining present in the final PGQDs product. Lastly, absorption and fluorescence spectroscopy determined the excitation wavelength at 420 nm and the emission at 650 nm which was successfully utilized in the imaging of HeLa cells using confocal microscopy.

Ti3 C2 TX MXene Modified with ZnTCPP with Bacteria Capturing Capability and Enhanced Visible Light Photocatalytic Antibacterial Activity

Light-assisted antibacterial therapy is a promising alternative to antibiotic therapy due to the high antibacterial efficacy without bacterial resistance. Recent research has mainly focused on the use of near-infrared light irradiation to kill bacteria by taking advantage of the synergistic effects rendered by hyperthermia and radical oxygen species. However, photocatalytic antibacterial therapy excited by visible light is more convenient and practical, especially for wounds. Herein, a visible light responsive organic-inorganic hybrid of ZnTCPP/Ti₃ C₂ T_X is designed and fabricated to treat bacterial infection with antibacterial efficiency of 99.86% and 99.92% within 10 min against Staphylococcus aureus and Escherichia coli, respectively. The porphyrin-metal complex, ZnTCPP, is assembled on the surface of Ti₃ C₂ T_X MXene to capture bacteria electrostatically and the Schottky junction formed between Ti₃ C₂ T_X and ZnTCPP promotes visible light utilization, accelerates charge separation, and enhances the mobility of photogenerated charges, and finally increases the photocatalytic activity. As a result of the excellent bacteria capturing ability and photocatalytic antibacterial effects, ZnTCPP/Ti₃ C₂ T_X exposed to visible light has excellent antibacterial properties in vitro and in vivo. Therefore, organic-inorganic materials that have been demonstrated to possess good biocompatibility and enhance wound healing have large potential in bio-photocatalysis, antibacterial therapy, as well as antibiotics-free treatment of wounds.

Investigation of adsorptive orientation state change of anionic porphyrin with the hydrolysis reaction of α-tricalcium phosphate

Interfacial interactions between anionic porphyrin (TCPP) and α-tricalcium phosphate in hydrolysis reaction were clarified, and the orientation of TCPP molecules on the reactive calcium phosphates can be controlled by the mineralization process.

Fluorescence Spectroscopy of Porphyrins and Phthalocyanines: Some Insights into Supramolecular Self-Assembly, Microencapsulation, and Imaging Microscopy

The molecular interactions of anionic tetrasulfonate phenyl porphyrin (TPPS) with poly(amido amine) (PAMAM) dendrimers of generation 2.0 and 4.0 (G2 and G4, respectively) forming H- or J-aggregates, as well as with human and bovine serum albumin proteins (HSA and BSA), were reviewed in the context of self-assembly molecular complementarity. The spectroscopic studies were extended to the association of aluminum phthtalocyanine (AlPCS4) detected with a PAMAM G4 dendrimer with fluorescence studies in both steady state and dynamic state, as well as due to the fluorescence quenching associated to electron-transfer with a distribution of lifetimes. The functionalization of TPPS with peripheral substituents enables the assignment of spontaneous pH-induced aggregates with different and well-defined morphologies. Other work reported in the literature, in particular with soft self-assembly materials, fall in the same area with particular interest for the environment. The microencapsulation of TPPS studies into polyelectrolyte capsules was developed quite recently and aroused much interest, which is well supported and complemented by the extensive data reported on the Imaging Microscopy section of the Luminescence of Porphyrins and Phthalocyanines included in the present review.

Spectroscopic Analysis of Apoferritin Associates with the Water-Soluble Porphyrins

The association behavior of apoferritin species with the anionic porphyrins, 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (H₂ TPPS^4- ) and its zinc(II) complex (ZnTPPS^4- ), which are water-soluble even in acidic solutions, was investigated for the first time through UV-Vis absorption and fluorescence spectroscopy in order to evaluate a potential ability of apoferritin as a stimuli-responsive molecular capsule. The absorption maximum wavelengths of both porphyrins were redshifted and the fluorescence intensity decreased, indicating the effective association between apoferritin species and the porphyrins, although it depended on the pH adjustment procedure. At pH 2, the ZnTPPS^4- associated with apoferritin subunits without demetallating and protonating, while the free base porphyrin formed the J-aggregate of the diprotonated species (H₄ TPPS^2- )_n , with extremely low fluorescence. As the concentration of apoferritin subunits increased, the H₂ TPPS^4- -subunits associates were formed accompanied by recovering the fluorescence. The association stoichiometries of 1 or 2 subunits/porphyrin obtained under neutral and acidic conditions. The significantly large association constant of ZnTPPS^4- as compared with that of H₂ TPPS^4- indicated that the coordination to the zinc(II) center strongly contributes to the association in addition to the electrostatic interaction between apoferritin subunits and the porphyrin under acidic conditions.

More Than 50-Fold Enhanced Nonlinear Optical Response of Porphyrin Molecules in Aqueous Solution Induced by Mixing Base and Organic Solvent

The difference absorption spectrum (DAS) of porphyrin molecules (tetraphenyl-porphyhrin sulfonic acid, TPPS) in aqueous solution induced by continuous wave laser irradiation has been reported previously. It was interpreted that the DAS was caused by the formation of TPPS aggregates induced by laser irradiation. However, transient spectra similar in their shape have already been reported and are attributed to the excited-state absorption and saturable absorption (SA) effects due to the triplet state formation in TPPS. In the present study, we investigated the triplet quenching effect by O2 on the DAS of TPPS aqueous solution and revealed that it originated from the triplet state formation. We also found that mixing the appropriate amount of MeOH and NaOH in TPPS aqueous solution increased its absorbance change by more than 50 times. This may be due to the decrease in dissolved oxygen concentration by mixing them. This result suggests the possibility of controlling the performance of NLO materials by adjusting the solvent mixture ratio and base/acid concentration.

1D materials from ionic self-assembly in mixtures containing chromonic liquid crystal mesogens

Ionic self-assembly is a simple yet powerful method to obtain robust nanostructures. Herewith, we use mixtures of oppositely-charged porphyrins that can act as mesogens to form chromonic liquid crystals in water, i.e., molecular stacks with orientational (nematic) or positional (hexagonal) order. Electrostatic locking coupled with π-π interactions between aromatic groups within the stacks, together with inter-stack hydrogen bonding induce formation of all-organic crystalline nanofibers with high aspect ratio (a few tenths of nanometers in width but several tenths of micrometers in length) and that display branching. The nanofibers prepared from metal-free porphyrin units feature interesting optical properties, including an absorption spectrum that is different from the simple sum of the individual spectra of the components, which is attributed to a striking aggregation-induced chromism. When in contact with some polar organic solvents the materials become fluorescent, as a result of disaggregation. In a proof-of-concept, the obtained self-assembled one-dimensional (1D) materials were carbonized (yield ca. 60%) to produce nitrogen-doped carbon nanofibers that can be used as active electrode materials for energy storage applications.

Photodegradation of Antibiotics by Noncovalent Porphyrin-Functionalized TiO2 in Water for the Bacterial Antibiotic Resistance Risk Management

Antibiotics represent essential drugs to contrast the insurgence of bacterial infections in humans and animals. Their extensive use in livestock farming, including aquaculture, has improved production performances and food safety. However, their overuse can implicate a risk of water pollution and related antimicrobial resistance. Consequently, innovative strategies for successfully removing antibiotic contaminants have to be advanced to protect human health. Among them, photodegradation TiO₂-driven under solar irradiation appears not only as a promising method, but also a sustainable pathway. Hence, we evaluated several composite TiO₂ powders with H₂TCPP, CuTCPP, ZnTCPP, and SnT4 porphyrin for this scope in order to explore the effect of porphyrins sensitization on titanium dioxide. The synthesis was realized through a fully non-covalent functionalization in water at room conditions. The efficacy of obtained composite materials was also tested in photodegrading oxolinic acid and oxytetracycline in aqueous solution at micromolar concentrations. Under simulated solar irradiation, TiO₂ functionalized with CuTCPP has shown encouraging results in the removal of oxytetracycline from water, by opening the way as new approaches to struggle against antibiotic's pollution and, finally, to represent a new valuable tool of public health.

A Small Molecular Multifunctional Tool for pH Detection, Fluorescence Imaging, and Photodynamic Therapy

A smart multitool platform for theranostics would be useful for monitoring the administration of therapies in vivo. However, the integration of multiple functions into a single small-molecule platform remains a challenge. In this study, we developed a multifunctional probe based on a small-molecule platform. The properties of this probe were investigated via hyperpolarized ¹²⁹Xe NMR/MRI, fluorescence imaging in cells and in vivo, and photodynamic therapy (PDT) in tumor mouse models. This multifunctional probe shows good pH response across a broad range of pH values. It also exhibits excellent fluorescence in vivo for mapping its biodistribution. Additionally, it produces enough ¹O₂ radicals for in vivo PDT. The combination of these functionalities into a single small-molecule platform, rather than a bulky nanoconstruct, offers unique possibilities for molecular imaging and therapy.

Assay of miRNA in cell samples using enhanced resonance light scattering technique based on self aggregation of magnetic nanoparticles

AIMS

miRNAs are regarded as potential biomarkers correlated with the development and progression of many diseases. However, it is a challenge to construct a sensitive method to detect them without using time-consuming radioactive labeling or complex amplification strategies.

METHODS

A facile resonance light scattering (RLS) system was developed for the detection of miRNA employing magnetic nanoparticles (MNPs) as RLS probes. MNPs were coated with streptavidin. DNA probes were modified on the surface of MNPs based on the specific interaction of streptavidin and biotin forming MNPs@DNA probes. MNPs@DNA probes dispersed in homogeneous media causing low RLS signal.

RESULTS & CONCLUSION

miRNA hybridized with DNA probes resulting in the aggregation of MNPs and inducing the enhancement of RLS intensity. miRNAs were determined successfully with limit of detection at 0.9 picomole per liter (pM). The potential clinical application of the present biosensor was also demonstrated by measuring miRNAs in human normal and cancer cells, and human serum samples.

Transformation of H-Aggregates and J-Dimers of Water-Soluble Tetrakis (4-carboxyphenyl) Porphyrin in Polyion Complex Micelles

Tetrakis (4-carboxyphenyl) porphyrin (TCPP) and polyelectrolyte poly(N-methyl-2-vinylpyridinium iodide)-b-poly(ethylene oxide) (PMVP₄₁-b-PEO₂₀₅) can self-aggregate into polyion complex (PIC) micelles in alkaline aqueous solution. UV-vis spectroscopy, fluorescence spectroscopy, transmission electron microscope, and dynamic light scattering were carried out to study PIC micelles. Density functional theory (DFT) calculation method was applied to study the interaction of TCPP and PMVP₄₁-b-PEO₂₀₅. We found that the H-aggregates and J-dimers of anionic TCPP transformed in PIC micelles. H-aggregates of TCPP formed at the charge ratio of TCPP/PMVP₄₁-b-PEO₂₀₅ 1:2 and J-dimer species at the charge ratio above 1:4, respectively. It is worth noting that the transformation from H-aggregates to J-dimer species of TCPP occurred just by adjusting the ratio of polymer and TCPP rather than by changing other factors such as pH, temperature, and ions.

Potential-Induced Aggregation of Anionic Porphyrins at Liquid|Liquid Interfaces

The adsorption and self-aggregation of anionic porphyrins were studied at the polarized water|1,2-dichloroethane (DCE) interface by polarization-modulation total internal reflection fluorescence (PM-TIRF) spectroscopy. 5,10,15,20-Tetrakis(4-sulfonatophenyl)porphyrin diacid (H₄TPPS^2-) and protoporphyrin IX (H₂PP^2-) exhibited high surface activities at the interface. The selective excitation of interfacial species in PM-TIRF measurements elucidated the potential-induced aggregation mechanism of the porphyrins. The J-aggregates of H₄TPPS^2- were reversibly formed only at the water|DCE interface by applying appropriate potentials even when the porphyrins exist as monomers in the aqueous and organic solutions. In the H₂PP^2- system, the slow aggregation process was found in the negative potential region. The spectral characteristics and the signal phase of PM-TIRF indicated that the H₂PP^2- monomers were adsorbed with relatively standing orientation and that the long axis of the J-aggregates was nearly in plane of the interface. H₂PP^2- was also investigated at the biomimetic phospholipid-adsorbed water|DCE interface. The competitive adsorption of neutral glycerophospholipids effectively inhibited the potential-dependent adsorption and interfacial aggregation processes of H₂PP^2-. The results demonstrated that the aggregation state of the charged species can reversibly be controlled at liquid|liquid interfaces as a function of externally applied potential.

Aggregation of Carbocyanine Dyes in Choline Chloride-Based Deep Eutectic Solvents in the Presence of an Aqueous Base

Deep eutectic solvents (DESs) have shown potential as novel media to support molecular aggregation. The self-aggregation behavior of two common and popular carbocyanine dyes, 5,5',6,6'-tetrachloro-1,1'-diethyl-3,3'-di(4-sulfobutyl)-benzimidazole carbocyanine (TDBC) and 5,5'-dichloro-3,3'-di(3-sulfopropyl)-9-methyl-benzothiacarbo cyanine (DMTC), is investigated within DES-based systems under ambient conditions. Although TDBC is known to form J-aggregates in basic aqueous solution, DMTC forms H-aggregates under similar conditions. The DESs used, glyceline and reline, are composed of salt choline chloride and two vastly different H-bond donors, glycerol and urea, respectively, in 1:2 mol ratios. Both DESs in the presence of base are found to support J-aggregates of TDBC. These fluorescent J-aggregates are characterized by small Stokes' shifts and subnanosecond fluorescence lifetimes. Under similar conditions, DMTC forms fluorescent H-aggregates along with J-aggregates within the two DES-based systems. The addition of cationic surfactant cetyltrimethylammonium bromide (CTAB) below its critical micelle concentration (cmc) to a TDBC solution of aqueous base-added glyceline shows the prominent presence of J-aggregates, and increasing the CTAB concentration to above cmc results in the disruption of J-aggregates and the formation of unprecedented H-aggregates. DMTC exclusively forms H-aggregates within a CTAB solution of aqueous base-added glyceline irrespective of the surfactant concentration. Anionic surfactant, sodium dodecylsulfate (SDS), present below its cmc within aqueous base-added DESs supports J-aggregation by TDBC; for similar SDS addition, DMTC forms H-aggregates within the glyceline-based system whereas both H- and J-aggregates exist within the reline-based system. A comparison of the carbocyanine dye behavior in various aqueous base-added DES systems to that in aqueous basic media reveals contrasting aggregation tendencies and/or efficiencies. Surfactants as additives are demonstrated to control and modulate carbocyanine dye self-aggregation within DES-based media. The unique nature of DESs as alternate media toward affecting cyanine dye aggregation is highlighted.

Solid-Phase Synthesis of Self-Assembling Multivalent π-Conjugated Peptides

We present a completely solid-phase synthetic strategy to create three- and four-fold peptide-appended π-electron molecules, where the multivalent oligopeptide presentation is dictated by the symmetries of reactive handles placed on discotic π-conjugated cores. Carboxylic acid and anhydride groups were viable amidation and imidation partners, respectively, and oligomeric π-electron discotic cores were prepared through Pd-catalyzed cross-couplings. Due to intermolecular hydrogen bonding between the three or four peptide axes, these π-peptide hybrids self-assemble into robust one-dimensional nanostructures with high aspect ratios in aqueous solution. The preparation of these systems via solid-phase methods will be detailed along with their self-assembly properties, as revealed by steady-state spectroscopy and transmission electron microscopy and electrical characterization using field-effect transistor measurements.

Porphyrin aggregates decorated MWCNT film for solar light harvesting: influence of J- and H-aggregation on the charge recombination resistance, photocatalysis, and photoinduced charge transfer kinetics

Effect of J- and H-aggregation on the photophysical and photochemical properties.

pH-Response Optimization of Amino-Substituted Tetraphenylporphyrin Derivatives as pH-Activatable Photosensitizers

Amino-substituted tetraphenylporphyrin derivatives have been designed as pH-activatable photosensitizers for photodynamic cancer therapy. The photophysical processes of the monoamino-substituted derivative N1 and nonsubstituted derivative N0 have been studied. The quantum yields of the fluorescence and photosensitization of singlet oxygen by N1 were very low in the neutral condition (OFF state), but these quantum yields were recovered by adding acid (ON state). These changes were not observed for N0; therefore, N1 is expected to be applicable as a pH-activatable photosensitizer. The ON/OFF switching mechanism of N1 has also been clarified. To optimize the pH response, tri- and tetraamino-substituted derivatives (N3 and N4) have also been explored. The pH response intensified as the number of amino groups increased. Furthermore, the ON/OFF switching ratio of N3 was 100, which is quite high.

Encapsulation of photoactive porphyrinoids in polyelectrolyte hollow microcapsules viewed by fluorescence lifetime imaging microscopy (FLIM)

Fluorescence Lifetime Imaging Microscopy (FLIM) was used to investigate the encapsulation of porphyrinoids in multilayer hollow microcapsules assembled layer by layer with poly(styrene sulfonate) (PSS) and poly(allylamine hydrochloride) (PAH).

Mechanism and application of halogen bond induced fluorescence enhancement and iodine molecule cleavage in solution

Halogen bonding between iodine and ciprofloxacin (I⋯N XB) induces I–I cleavage with fluorescence enhancement.

The absorption and fluorescence emission spectra of meso-tetra(aryl)porphyrin dications with weak and strong carboxylic acids: a comparative study

The absorption and emission spectra, natural radiative lifetime, radiative rate constant (k_r) and the non-radiative one (k_nr) of the dications of a series of meso-tetra(aryl)porphyrins with CF₃COOH and HCOOH were studied and compared.

Mitochondrial metals as a potential therapeutic target in neurodegeneration

Transition metals are critical for enzyme function and protein folding, but in excess can mediate neurotoxic oxidative processes. As mitochondria are particularly vulnerable to oxidative damage due to radicals generated during ATP production, mitochondrial biometal homeostasis must therefore be tightly controlled to safely harness the redox potential of metal enzyme cofactors. Dysregulation of metal functions is evident in numerous neurological disorders including Alzheimer's disease, stroke, Parkinson's disease, Huntington's disease, amyotrophic lateral sclerosis and Friedrich's ataxia. This review describes the mitochondrial metal defects in these disorders and highlights novel metal-based therapeutic approaches that target mitochondrial metal homeostasis in neurological disorders.

Theoretical model for optical properties of porphyrin

We propose a simple model to interpret the optical absorption spectra of porphyrin in different solvents. Our model successfully explains the decrease in the intensity of optical absorption at maxima of increased wavelengths. We also prove the dependence of the intensity and peak positions in the absorption spectra on the environment. The nature of the Soret band is supposed to derive from π plasmon. Our theoretical calculations are consistent with previous experimental studies.

Design, synthesis and photophysical studies of dipyrromethene-based materials: insights into their applications in organic photovoltaic devices

This review article presents the most recent developments in the use of materials based on dipyrromethene (DPM) and azadipyrromethenes (ADPM) for organic photovoltaic (OPV) applications. These chromophores and their corresponding BF2-chelated derivatives BODIPY and aza-BODIPY, respectively, are well known for fluorescence-based applications but are relatively new in the field of photovoltaic research. This review examines the variety of relevant designs, synthetic methodologies and photophysical studies related to materials that incorporate these porphyrinoid-related dyes in their architecture. The main idea is to inspire readers to explore new avenues in the design of next generation small-molecule and bulk-heterojunction solar cell (BHJSC) OPV materials based on DPM chromophores. The main concepts are briefly explained, along with the main challenges that are to be resolved in order to take full advantage of solar energy.

Spectroelectrochemical characterization of dendrimer-porphyrin associates at polarized liquid|liquid interfaces

Molecular encapsulation of anionic porphyrins in NH2-terminated polyamidoamine (PAMAM) dendrimers and the interfacial behavior of the dendrimer-porphyrin associates were studied at the polarized water|1,2-dichloroethane (DCE) interface. Formation of the ion associates was significantly dependent on the pH condition and on generation of dendrimers. 5,10,15,20-Tetrakis(4-sulfonatophenyl)porphyrin (ZnTPPS(4-)) associated with the positively charged fourth-generation (G4) PAMAM dendrimer was highly stabilized in acidic aqueous solution without protolytic demetalation in a wide range of pH values (pH > 2). In contrast to the zinc(II) complex, the free base porphyrin (H2TPPS(4-)) was readily protonated under acidic conditions even in the presence of the dendrimers. In addition, the J-aggregates of diprotonated species, (H4TPPS(2-))n, were preferably formed on the dendrimer. The interfacial mechanism of the dendrimer-porphyrin associates was analyzed in detail by potential-modulated fluorescence (PMF) spectroscopy. PMF results indicated that the dendrimers incorporating porphyrin molecules were transferred across the positively polarized water|DCE interface via adsorption step, whereas the transfer responses of the porphyrin ions released from the dendrimers were observed at negatively polarized conditions. A negative shift of the transfer potential of porphyrin ions compared to the intrinsic transfer potential was apparently observed for each ion association system. The ion association stability between the dendrimer and the porphyrin molecules could be estimated from a negative shift of the transfer potential. ZnTPPS(4-) exhibited relatively strong interaction with the higher generation dendrimer, whereas H2TPPS(4-) was less effectively associated with the dendrimers.

Surfactant-assisted porphyrin based hierarchical nano/micro assemblies and their efficient photocatalytic behavior

In this report, we have demonstrated the synthesis of surfactant-assisted different morphologies of meso-tetra(4-carboxyphenyl)porphyrin assemblies (spherical to flower shaped). These nano/micro assemblies are well characterized by scanning electron microscopy and X-ray diffraction. The formation of assemblies is driven by noncovalent interactions such as hydrophobic-hydrophobic and aromatic π-π stacking between the molecules. The steady state and time-resolved spectroscopic investigation reveal that different assemblies are formed by virtue of special supramolecular organizations. The photocatalytic activities of different assemblies have been demonstrated with an organic pollutant Rhodamine B dye under the visible light irradiation. Such porphyrin based assemblies could pave the way for designing new optical based materials for the applications in photocatalytic, photovoltaic, and light harvesting system.

Spectroscopic and photophysical study of the demetallation of a zinc porphyrin and the aggregation of its free base in a tetraalkylphosphonium ionic liquid

Dissolving zinc tetraphenylporphyrin in the tetraalkylphosphonium chloride ionic liquid P4448Cl results in progressive demetallation of the solute and quantitative production of the free base porphyrin.

A distinct reversible colorimetric and fluorescent low pH response on a water-stable zirconium–porphyrin metal–organic framework

A conceptual drawing of PCN-222 showing the reversible color change from purple to green (and corresponding reversal) upon protonation (and subsequent deprotonation) from within the pores.

Aggregation of a model porphyrin within poly(ethylene glycol) (PEG): effect of water, PEG molecular weight, ionic liquids, salts, and temperature

Porphyrin J-aggregation is facilitated in 10 wt% water-added PEGs at pH 1; it increases with PEG MW and is controlled by RTILs.