Combining Light-Harvesting and Charge Separation in a Self-Assembled Artificial Photosynthetic System Based on Perylenediimide Chromophores

Facile Synthesis and Photoluminescent Properties of Asymmetric Perylene Diimides Capable of Tuning Emission Colors in Polymeric Matrices

We report the facile synthesis of asymmetric perylene diimides (asym-PDIs) using readily available reagents, demonstrating their distinct photoluminescent properties. In CHCl3, asym-PDIs exhibit higher solubility compared to traditional perylene dyes, of which solubilities can be varied by substituent selections. Among them, UV-vis absorption spectra of CPE in CHCl3 solution displayed no aggregate peaks in the ground state, maintaining high photoluminescent quantum yields. Also, CPE can be readily dispersed into poly(methyl methacrylate) PMMA (CPE-PMMA), forming thin films without aggregate formation. Importantly, the emission color of CPE-PMMA thin films significantly changes with the addition of polycyclic aromatic hydrocarbons (PAHs). These color changes should be strongly correlated with the HOMO level of the added PAHs.

Structure-enabled long-lived charge separation in single crystals of an asymmetric donor-acceptor perylenediimide cyclophane

We report the synthesis and characterization of a covalently linked asymmetric cyclophane comprising a 1,7-di(pyrrolidin-1'-yl)perylene-3,4,9,10-bis(dicarboximide) (pyrPDI) and 1,6,7,12-tetra(4'-t-butylphenoxy)perylene-3,4,9,10-bis(dicarboximide) (tpPDI), which absorbs light from 400-750 nm. Single crystals of pyrPDI-tpPDI were analyzed by using X-ray diffraction and transient absorption microscopy. The crystal structure contains several types of intermolecular donor-acceptor interactions (pyrPDI-pyrPDI, tpPDI-tpPDI, and pyrPDI-tpPDI) in addition to the covalently installed intramolecular interaction. Following photoexcitation of the pyrPDI-tpPDI single crystal, the transient absorption data show that charge separation occurs in τ = 21 ps, which is about nine times faster than in toluene solution, while charge recombination occurs in τ > 2 μs, which is more than 400 times longer than in solution. The faster charge separation in the single crystals results from the intermolecular donor-acceptor pyrPDI-tpPDI interactions, while the greatly enhanced charge-separated state lifetime is a consequence of charge transport through the intermolecular π-stacks. These results demonstrate the utility of pre-organizing donor-acceptor structural motifs to elicit specific crystal morphologies that can lead to enhanced photogenerated charge carrier lifetimes for solar energy conversion.

A New Series of Sandwich-Type 5,5'-Biterphenylenes: Synthetic Challenge, Structural Uniqueness and Photodynamics

A new series of biaryls, bi-linear-terphenylenes (BLTPs), were prepared using the tert-butyllithium-mediated cyclization as the key synthetic step. The three-dimensional structures of the studied compounds were verified using X-ray crystallography and DFT calculations. Tetraaryl(ethynyl)-substituted BLTPs are highly crowded molecules, and the internal rotation around the central C-C bond is restricted due to a high barrier (>50 kcal/mol). These structures contain several aryl/terphenylenyl/aryl sandwiches, where the through-space π-π (TSPP) interactions are strongly reflected in the shielding of 1 H NMR chemical shifts, reduction of oxidation potentials, increasing aromaticity of the central six-membered ring and decreasing antiaromaticity of the four-membered rings in a terphenylenyl moiety based on NICS(0) and iso-chemical shielding surfaces. Despite the restricted C-C bond associated intramolecular TSPP interactions for BLTPs in the ground state, to our surprise, the electronic coupling between two linear terphenylenes (LTPs) in BLTPs in the excited state is weak, so that the excited-state behavior is dominated by the corresponding monomeric LTPs. In other words, all BLTPs undergo ultrafast relaxation dynamics via strong exciton-vibration coupling, acting as a blue-light absorber with essentially no emission.

Bioinspired Self-Assembly of Metalloporphyrins and Polyelectrolytes into Hierarchical Supramolecular Nanostructures for Enhanced Photocatalytic H2 Production in Water

Polypeptides, as natural polyelectrolytes, are assembled into tailored proteins to integrate chromophores and catalytic sites for photosynthesis. Mimicking nature to create the water-soluble nanoassemblies from synthetic polyelectrolytes and photocatalytic molecular species for artificial photosynthesis is still rare. Here, we report the enhancement of the full-spectrum solar-light-driven H2 production within a supramolecular system built by the co-assembly of anionic metalloporphyrins with cationic polyelectrolytes in water. This supramolecular photocatalytic system achieves a H2 production rate of 793 and 685 μmol h-1  g-1 over 24 h with a combination of Mg or Zn porphyrin as photosensitizers and Cu porphyrin as a catalyst, which is more than 23 times higher than that of free molecular controls. With a photosensitizer to catalyst ratio of 10000 : 1, the highest H2 production rate of >51,700 μmol h-1  g-1 with a turnover number (TON) of >1,290 per molecular catalyst was achieved over 24 h irradiation. The hierarchical self-assembly not only enhances photostability through forming ordered stackings of the metalloporphyrins but also facilitates both energy and electron transfer from antenna molecules to catalysts, and therefore promotes the photocatalysis. This study provides structural and mechanistic insights into the self-assembly enhanced photostability and catalytic performance of supramolecular photocatalytic systems.

Controlling the symmetry breaking charge transfer extent in excited quadrupolar molecules by tuning the locally excited state

The effect of a locally excited state on charge transfer symmetry breaking (SBCT) in excited quadrupolar molecules in solutions has been studied. The interaction of a locally excited state and two zwitterionic states is found to either increase or decrease the degree of SBCT depending on the molecular parameters. A strategy on how to adjust the molecular parameters to control the extent of SBCT is presented. The influence of level degeneracy on SBCT is identified and discussed in detail. The level degeneracy is shown to lead to the existence of a hidden dipole moment in excited quadrupolar molecules. Its manifestations in SBCT are analyzed. The main conclusions are consistent with the available experimental data.

Symmetry breaking charge transfer leading to charge separation in a far-red absorbing bisstyryl-BODIPY dimer

Symmetry breaking charge transfer is one of the important photo-events occurring in photosynthetic reaction centers that is responsible for initiating electron transfer leading to a long-lived charge-separated state and has been successfully employed in light-to-electricity converting optoelectronic devices. In the present study, we report a newly synthesized, far-red absorbing and emitting BODIPY-dimer to undergo symmetry-breaking charge transfer leading to charge-separated states of appreciable lifetimes in polar solvents. Compared to its monomer analog, both steady-state and time-resolved fluorescence originating from the S1 state of the dimer revealed quenching which increased with an increase in solvent polarity. The electrostatic potential map from DFT and the time-dependent DFT calculations suggested the existence of a quadrupolar type charge transfer state in polar solvents, and the singlet excited state to be involved in the charge separation process. The electrochemically determined redox gap being smaller than the energy of the S1 state supported the thermodynamic feasibility of the envisioned symmetry-breaking charge transfer and separation. The spectrum of the charge-separated state arrived from spectroelectrochemical studies, revealing diagnostic peaks helpful for transient spectral interpretation. Finally, ultrafast transient pump-probe spectroscopy provided conclusive evidence of diabatic charge separation in polar solvents by far-red pulsed laser light irradiation. The measured lifetime of the final charge-separated states was found to be 165 ps in dichlorobenzene, 140 ps in benzonitrile, and 43 ps in dimethyl sulfoxide, revealing their significance in light energy harvesting, especially from the less-explored far-red region.

High-Efficiency Photoinduced Charge Separation in Fe(III)carbene Thin Films

Symmetry-breaking charge separation in molecular materials has attracted increasing attention for optoelectronics based on single-material active layers. To this end, Fe(III) complexes with particularly electron-donating N-heterocyclic carbene ligands offer interesting properties with a 2LMCT excited state capable of oxidizing or reducing the complex in its ground state. In this Communication, we show that the corresponding symmetry-breaking charge separation occurs in amorphous films of pristine [Fe(III)L2]PF6 (L = [phenyl(tris(3-methylimidazol-2-ylidene))borate]-). Excitation of the solid material with visible light leads to ultrafast electron transfer quenching of the 2LMCT excited state, generating Fe(II) and Fe(IV) products with high efficiency. Sub-picosecond charge separation followed by recombination in about 1 ns could be monitored by transient absorption spectroscopy. Photoconductivity measurements of films deposited on microelectrode arrays demonstrated that photogenerated charge carriers can be collected at external contacts.

Unequal Perylene Diimide Twins in a Quadruple Assembly

Natural light-harvesting (LH) systems can divide identical dyes into unequal aggregate states, thereby achieving intelligent "allocation of labor". From a synthetic point of view, the construction of such kinds of unequal and integrated systems without the help of proteinaceous scaffolding is challenging. Here, we show that four octatetrayne-bridged ortho-perylene diimide (PDI) dyads (POPs) self-assemble into a quadruple assembly (POP)₄ both in solution and in the solid state. The two identical PDI units in each POP are compartmentalized into weakly coupled PDIs (P520) and closely stacked PDIs (P550) in (POP)₄ . The two extreme pools of PDI chromophores were unambiguously confirmed by single-crystal X-ray crystallography and NMR spectroscopy. To interpret the formation of the discrete quadruple assembly, we also developed a two-step cooperative model. Quantum-chemical calculations indicate the existence of multiple couplings within and across P520 and P550, which can satisfactorily describe the photophysical properties of the unequal quadruple assembly_. This finding is expected to help advance the rational design of dye stacks to emulate functions of natural LH systems.

Aromatic-bridged and meso-meso-linked BF2-smaragdyrin dimers exhibit fast decays in polar solvents by symmetry-breaking charge transfer

Symmetry-breaking charge transfer is one of the key process in photosynthetic reaction centers and specific artificial optoelectronic devices such as dye-sensitized solar cells. Here we report the synthesis of aromatic-bridged BF₂-smaragdyrin dimers, meso-free BF₂-smaragdyrin, and its meso-meso-linked BF₂-smaragdyrin dimer. The decays of S₁-states of these dimers are accelerated with an increase in solvent polarity and a decrease in the distance between the two BF₂-smaragdyrin units, suggesting symmetry-breaking charge transfer. The fluorescence lifetimes of the dimers become shortened in polar solvents. However, ultrafast transient absorption spectroscopy do not detect charge-separated ion pairs. On the basis of these results, we conclude that the decays of the excited states of the BF₂-smaragdyrin dimers are accelerated by solvation-induced symmetry-breaking charge transfer, depending on the degree of the electronic interaction between the smaragdryin units as a rare case for porphyrinoids. The degree of charge transfer is larger for dimers with larger electronic interactions.

Self-assembled systems for artificial photosynthesis

The last few decades have seen an impressive development in molecular-based artificial photosynthesis, thanks to the design of integrated light-harvesting antennae, charge separation systems, and catalysts for water oxidation or hydrogen production based on covalently linked subunits. However, in recent years, self-assembly and spontaneous aggregation of components emerged - sometimes also through serendipity - for the preparation of multicomponent systems aimed to perform the basic processes needed for artificial photosynthesis. Here we critically discuss some key articles that have recently shown the potential of self-assembly for artificial photosynthesis, ranging from self-assembly of antennae and charge separation systems to integrated antenna/catalyst assemblies, to planned co-localization of various components into restricted environments. It is evident that self-assembly can generate emerging properties with respect to the non-aggregated species, and such emerging properties can be quite convenient for designing efficient photocatalytic systems.

Fullerene-Perylenediimide (C60-PDI) Based Systems: An Overview and Synthesis of a Versatile Platform for Their Anchor Engineering

An overview of the different covalent bonding synthetic strategies of two electron acceptors leading to fullerene-perylenediimide (C₆₀-PDI)-based systems, essentially dyads and triads, is presented, as well as their more important applications. To go further in the development of such electron and photoactive assemblies, an original aromatic platform 5-benzyloxy-3-formylbenzoic acid was synthesized to graft both the PDI dye and the fullerene C₆₀. This new C₆₀-PDI dyad exhibits a free anchoring phenolic function that could be used to attach a third electro- and photoactive unit to study cascade electron and/or energy transfer processes or to obtain unprecedented side-chain polymers in which the C₆₀-PDI dyads are attached as pendant moieties onto the main polymer chain. This C₆₀-PDI dyad was fully characterized, and cyclic voltammetry showed the concomitant reduction process onto both C₆₀ and PDI moieties at identical potential. A quasi-quantitative quenching of fluorescence was demonstrated in this C₆₀-PDI dyad, and an intramolecular energy transfer was suggested between these two units. After deprotection of the benzyloxy group, the free hydroxyl functional group of the platform was used as an anchor to reach a new side-chain methyl methacrylate-based polymer in which the PDI-C₆₀ dyad units are located as pendants of the main polymer chain. Such polymer which associates two complementary acceptors could find interesting applications in optoelectronics and in particular in organic solar cells.

Substituent-dependent absorption and fluorescence properties of perylene bisimide radical anions and dianions

Perylene-3,4:9,10-bis(dicarboximides) (PBIs) rank among the most important functional dyes and organic semiconductors, but only recently have their radical anions and dianions attracted interest for a variety of applications. Here, we systematically elucidate the functional properties (redox, absorption, and emission) of five PBI anions and dianions bearing different bay-substituents attached to the chromophore core. Cyclic voltammetry measurements reveal the influence of the substituents ranging from electron-withdrawing cyano to electron-donating phenoxy groups on the oxidation and reduction potentials that relate to the HOMO and LUMO levels ranging from -7.07 eV to -6.05 eV and -5.01 eV to -4.05 eV, respectively. Spectroelectrochemical studies reveal a significant number of intense absorption bands in the NIR-spectral range (750-1400 nm) for the radical anions, whereas the dianionic species are characterized by similar spectra to those for the neutral dyes, however being bathochromically shifted and with increased molar extinction coefficients of approximately 100 000 M^-1 cm^-1. The increase of the transition dipole moment is up to 56% and accompanied by an almost cyanine-like red-shifted (by 300 nm) absorption spectrum for the most electron-poor tetracyanotetrachloro PBI. Whilst the outstanding fluorescence properties of the neutral PBIs are lost for the radical anions, an appreciable near-infrared (NIR) fluorescence with a quantum yield of up to 18% is revealed for the dianions by utilizing a custom-built flow-cell spectroelectrochemistry setup. Time-dependent density functional theory calculations help to assign the absorption bands to the respective electronic transitions.

Bimetallic Copper/Ruthenium/Osmium Complexes: Observation of Conformational Differences Between the Solution Phase and Solid State by Atomic Pair Distribution Function Analysis

High-energy X-ray scattering and pair distribution function analysis (HEXS/PDF) is a powerful method to reveal the structure of materials lacking long-range order, but is underutilized for molecular complexes in solution. We demonstrate the application of HEXS/PDF with 0.26 Å resolution to uncover the solution structure of five bimetallic Cu^I /Ru^II /Os^II complexes. HEXS/PDF of each complex in acetonitrile solution confirms the pairwise distances in the local coordination sphere of each metal center as well as the metal⋅⋅⋅metal distances separated by over 12 Å. The metal⋅⋅⋅metal distance detected in solution is compared with that from the crystal structure and molecular models to confirm that distortions to the metal bridging ligand are unique to the solid state. This work presents the first example of observing sub-Ångström conformational differences by direct comparison of solution phase and solid-state structures and shows the potential for HEXS/PDF in the determination of solution structure of single molecules.

Hybrid Tetrameric Perylene Diimide Assemblies

Organic photovoltaics have found utility as indoor light recycling devices providing an opportunity for the sustainable powering of IoT sensors and related smart electronics. In the report, two organic π-conjugated molecules consisting of four perylene diimide (PDI) chromophores each are presented and used as non-fullerene acceptors in indoor photovoltaic devices. The new materials consist of a dimeric N-annulated PDI core with single PDIs grafted onto the pyrrolic N-atom positions of the core. Compounds PDI₄ e and PDI₄ i are PDI tetramers and differ with PDI₄ e having the terminal N-annulated PDI with pyrrolic N-atom distal to the core and PDI₄ i having the terminal N-annulated PDI with pyrrolic N-atom proximal to the core. The structural and optoelectronic properties were investigated using NMR spectroscopy, optical absorption and emission spectroscopy, and cyclic voltammetry. The compounds exhibit typical optical signatures for PDIs but notable is that the addition of grafted PDI molecules prevents significant aggregation of the dimeric PDI core, as compared to a reference dimer. Use as non-fullerene acceptors in ternary bulk-heterojunction blends with the polymer FBT and fullerene PC₆₁ BM lead to increased open-circuit voltages and power conversion efficiencies upwards of 13.7 % at 2000 lux light intensity.

Supramolecular and suprabiomolecular photochemistry: a perspective overview

In this perspective review article, we have attempted to bring out the important current trends of research in the areas of supramolecular and suprabiomolecular photochemistry. Since the spans of the subject areas are very vast, it is impossible to cover all the aspects within the limited space of this review article. Nevertheless, efforts have been made to assimilate the basic understanding of how supramolecular interactions can significantly change the photophysical and other related physiochemical properties of chromophoric dyes and drugs, which have enormous academic and practical implications. We have discussed with reference to relevant chemical systems where supramolecularly assisted modulations in the properties of chromophoric dyes and drugs can be used or have already been used in different areas like sensing, dye/drug stabilization, drug delivery, functional materials, and aqueous dye laser systems. In supramolecular assemblies, along with their conventional photophysical properties, the acid-base properties of prototropic dyes, as well as the excited state prototautomerization and related proton transfer behavior of proton donor/acceptor dye molecules, are also largely modulated due to supramolecular interactions, which are often reflected very explicitly through changes in their absorption and fluorescence characteristics, providing us many useful insights into these chemical systems and bringing out intriguing applications of such changes in different applied areas. Another interesting research area in supramolecular photochemistry is the excitation energy transfer from the donor to acceptor moieties in self-assembled systems which have immense importance in light harvesting applications, mimicking natural photosynthetic systems. In this review article, we have discussed varieties of these aspects, highlighting their academic and applied implications. We have tried to emphasize the progress made so far and thus to bring out future research perspectives in the subject areas concerned, which are anticipated to find many useful applications in areas like sensors, catalysis, electronic devices, pharmaceuticals, drug formulations, nanomedicine, light harvesting, and smart materials.

Functionalized naphthalenediimide based supramolecular charge-transfer complexes via self-assembly and their photophysical properties

Two new intermolecular CT complexes having large Stokes shift (>170 nm) and significant fluorescence life-time (∼1.55 ns) have been prepared and exploited for cell imaging application.

Tuning the Triplet Excited State of Bis(dipyrrin) Zinc(II) Complexes: Symmetry Breaking Charge Transfer Architecture with Exceptionally Long Lived Triplet State for Upconversion

Zinc(II) bis(dipyrrin) complexes, which feature intense visible absorption and efficient symmetry breaking charge transfer (SBCT) are outstanding candidates for photovoltaics but their short lived triplet states limit applications in several areas. Herein we demonstrate that triplet excited state dynamics of bis(dipyrrin) complexes can be efficiently tuned by attaching electron donating aryl moieties at the 5,5'-position of the complexes. For the first time, a long lived triplet excited state (τ_T =296 μs) along with efficient ISC ability (Φ_Δ =71 %) was observed for zinc(II) bis(dipyrrin) complexes, formed via SBCT. The results revealed that molecular geometry and energy gap between the charge transfer (CT) state and triplet energy levels strongly control the triplet excited state properties of the complexes. An efficient triplet-triplet annihilation upconversion system was devised for the first time using a SBCT architecture as triplet photosensitizer, reaching a high upconversion quantum yield of 6.2 %. Our findings provide a blueprint for the development of triplet photosensitizers based on earth abundant metal complexes with long lived triplet state for revolutionary photochemical applications.

Symmetry-Breaking Charge-Transfer Chromophore Interactions Supported by Carbon Nanodots

Carbon dots (CDs) and their derivatives are useful platforms for studying electron-donor/acceptor interactions and dynamics therein. Herein, we couple amorphous CDs with phthalocyanines (Pcs) that act as electron donors with a large extended π-surface and intense absorption across the visible range of the solar spectrum. Investigations of the intercomponent interactions by means of steady-state and pump-probe transient absorption spectroscopy reveal symmetry-breaking charge transfer/separation and recombination dynamics within pairs of phthalocyanines. The CDs facilitate the electronic interactions between the phthalocyanines. Thus, our findings suggest that CDs could be used to support electronic couplings in multichromophoric systems and further increase their applicability in organic electronics, photonics, and artificial photosynthesis.

Optical monitoring of polymerizations in droplets with high temporal dynamic range

The ability to optically monitor a chemical reaction and generate an in situ readout is an important enabling technology, with applications ranging from the monitoring of reactions in flow, to the critical assessment step for combinatorial screening, to mechanistic studies on single reactant and catalyst molecules. Ideally, such a method would be applicable to many polymers and not require only a specific monomer for readout. It should also be applicable if the reactions are carried out in microdroplet chemical reactors, which offer a route to massive scalability in combinatorial searches. We describe a convenient optical method for monitoring polymerization reactions, fluorescence polarization anisotropy monitoring, and show that it can be applied in a robotically generated microdroplet. Further, we compare our method to an established optical reaction monitoring scheme, the use of Aggregation-Induced Emission (AIE) dyes, and find the two monitoring schemes offer sensitivity to different temporal regimes of the polymerization, meaning that the combination of the two provides an increased temporal dynamic range. Anisotropy is sensitive at early times, suggesting it will be useful for detecting new polymerization "hits" in searches for new reactivity, while the AIE dye responds at longer times, suggesting it will be useful for detecting reactions capable of reaching higher molecular weights.

Steric Interactions Impact Vibronic and Vibrational Coherences in Perylenediimide Cyclophanes

Designing molecular systems that exploit vibronic coherence to improve light harvesting efficiencies relies on understanding how interchromophoric interactions, such as van der Waals forces and dipolar coupling, influence these coherences in multichromophoric arrays. However, disentangling these interactions requires studies of molecular systems with tunable structural relationships. Here, we use a combination of two-dimensional electronic spectroscopy and femtosecond stimulated Raman spectroscopy to investigate the role of steric hindrance between chromophores in driving changes to vibronic and vibrational coherences in a series of substituted perylenediimide (PDI) cyclophane dimers. We report significant differences in the frequency power spectra from the cyclophane dimers versus the corresponding monomer reference. We attribute these differences to distortion of the PDI cores from steric interactions between the substituents. These results highlight the importance of considering structural changes when rationalizing vibronic coupling in multichromophoric systems.

Photophysical, electrochemical, self-assembly, and molecular packing properties of a sulfur-decorated perylene derivative

A sulfur-decorated perylene derivative, 1-propanethiol-N,N′-dicyclohexyl perylene-3,4,9,10 tetracarboxylic diimide (PTPDI), was synthesized and fully characterized by 1H NMR, 13C NMR, FTIR, HRMS, UV–vis absorption, fluorescence, fluorescence lifetime, fluorescence quantum yield, cyclic voltammetry, and thermogravimetric techniques. The optical, fluorescence, and scanning electron microscopies were employed to study its self-assembly process. The photophysical properties were affected strongly by modifying the propanethiol unit linking to the perylene core. Furthermore, the chromophore showed two irreversible oxidations and two quasi-reversible reductions in dichloromethane at modest potential. The optical properties of PTPDI in various conditions and complementary density functional theory calculations were reported. Due to steric hindrance of the bulky n-propyl mercaptan substituent, PTPDI molecules are arranged in slipped face-to-face fashion to form J-aggregates. Thus, the intermolecular π–π actions of the molecule are weak, causing its high luminescence efficiency. In the meantime, the space between perylene cores is very short (3.45 Å), which is favorable for the hopping transportation of charge carrier from one molecule to an adjacent one. PTPDI could be a candidate material for acquiring a well-defined organic nanostructure with excellent charge-transporting and light-emitting capabilities.

Self-assembly of multi-stranded perylene dye J-aggregates in columnar liquid-crystalline phases

Many discoid dyes self-assemble into columnar liquid-crystalline (LC) phases with packing arrangements that are undesired for photonic applications due to H-type exciton coupling. Here, we report a series of crystalline and LC perylene bisimides (PBIs) self-assembling into single or multi-stranded (two, three, and four strands) aggregates with predominant J-type exciton coupling. These differences in the supramolecular packing and optical properties are achieved by molecular design variations of tetra-bay phenoxy-dendronized PBIs with two N–H groups at the imide positions. The self-assembly is driven by hydrogen bonding, slipped π–π stacking, nanosegregation, and steric requirements of the peripheral building blocks. We could determine the impact of the packing motifs on the spectroscopic properties and demonstrate different J- and H-type coupling contributions between the chromophores. Our findings on structure–property relationships and strong J-couplings in bulk LC materials open a new avenue in the molecular engineering of PBI J-aggregates with prospective applications in photonics.

Perylene bisimides (PBI) exhibit interesting photophysical and self-assembly properties but detailed understanding of the correlation between packing motif and spectroscopic properties is lacking. Here the authors report on self-assembling of PBIs in liquid crystalline phases to give aggregates with J- and H-type coupling contribution between the chromophores.

Visible-light-mediated dehydrogenative cross-coupling between terminal alkynes and aldehydes by employing a supramolecular polymeric ensemble of PBI derivative

A supramolecular polymer of PBI derivative and ZnO NPs exhibits remarkable efficiency in direct dehydrogenative cross-coupling reaction for the synthesis of ynones under photocatalytic conditions.

Synthesis, characterization and photophysical properties of ferrocenyl and mixed sandwich cobaltocenyl ester linked meso-triaryl corrole dyads

We report here the design and synthesis of corrole-metallocene dyads consisting of a metallocene (either ferrocene (Dyad 1) or mixed sandwich [Formula: see text]-[C[Formula: see text]H[Formula: see text](COOH)]Co([Formula: see text]-C[Formula: see text]Ph[Formula: see text] (Dyad 2)) connected via an ester linkage at meso phenyl position. Both the dyads were characterized by [Formula: see text]H NMR, MALDI-TOF, UV-visible, fluorescence spectroscopies (steady-state, picosecond time-resolved), femtosecond transient absorption spectroscopy (fs-TA) and electrochemical methods. The absorption spectra of these dyads showed slight broadening and splitting of the Soret band that indicates a weak ground state interaction between the corrole macrocycle and metallocene part of the present donor–acceptor (D–A) system. However, in both the dyad systems, fluorescence emission of the corrole was quenched in polar solvents as compared to its parent compound 10-(4-hydroxyphenyl)-5,15-bis-(pentafluorophenyl ) corrole (Ph-Corr). The quenching was more pronounced in ferrocene derivatives than in cobaltocenyl derivatives. Transient absorption studies confirm the absence of photoinduced electron transfer from metallocene to correl for these dyad systems and the quenching of singlet state of corrole is found to enhance intersystem crossing due to heavy atom effect.

Lighting up long-range charge-transfer states by a localized plasmonic field

The long-range charge-transfer states in a donor-acceptor system exhibit well separated electron-hole pairs, but are often difficult to achieve by optical means owing to a very small overlap between the wave functions of the donor and acceptor. We have found that the introduction of a spatially confined plasmon can enhance the transition probability to the long-range charge-transfer states as it can effectively break the intrinsic symmetry selection rule imposed on the system. Meanwhile, the intensity borrowed from local excitations could also be selectively promoted, allowing the manipulation of the excited quantum states. In addition, our calculations reveal that the donor and acceptor moieties can be unambiguously visualized in real space by tip-enhanced resonance Raman images. These findings can benefit light-harvesting and also be readily extended to diverse optical processes.

Pillararene-based fluorescent chemosensors: recent advances and perspectives

This feature article summarizes recent research in the pillararene-based fluorescent chemosensor field in terms of ion sensing, small molecule recognition, biomolecule detection, fluorescent supramolecular aggregates, and biomedical imaging.

Highly efficient FRET from aggregation-induced emission to BODIPY emission based on host–guest interaction for mimicking the light-harvesting system

A novel highly efficient FRET system from aggregation-induced emission to BODIPY emission based on the host–guest interaction for mimicking a light harvesting system was disclosed with a FRET efficiency up to 93%

Screening Libraries of Semifluorinated Arylene Bisimides to Discover and Predict Thermodynamically Controlled Helical Crystallization

Synthesis, structural, and retrostructural analysis of a library containing 16 self-assembling perylene (PBI), 1,6,7,12-tetrachloroperylene (Cl₄PBI), naphthalene (NBI), and pyromellitic (PMBI) bisimides functionalized with environmentally friendly AB₃ chiral racemic semifluorinated minidendrons at their imide groups via m = 0, 1, 2, and 3 methylene units is reported. These semifluorinated compounds melt at lower temperatures than homologous hydrogenated compounds, permitting screening of all their thermotropic phases via structural analysis to discover thermodynamically controlled helical crystallization from propeller-like, cogwheel, and tilted molecules as well as lamellar-like structures. Thermodynamically controlled helical crystallization was discovered for propeller-like PBI, Cl₄PBI and NBI with m = 0. Unexpectedly, assemblies of twisted Cl₄PBIs exhibit higher order than those of planar PBIs. PBI with m = 1, 2, and 3 form a thermodynamically controlled columnar hexagonal 2D lattice of tilted helical columns with intracolumnar order. PBI and Cl₄PBI with m = 1 crystallize via a recently discovered helical cogwheel mechanism, while NBI and PMBI with m = 1 form tilted helical columns. PBI, NBI and PMBI with m = 2 generate lamellar-like structures. 3D and 2D assemblies of PBI with m = 1, 2, and 3, NBI with m = 1 and PMBI with m = 2 exhibit 3.4 Å π-π stacking. The library approach applied here and in previous work enabled the discovery of six assemblies which self-organize via thermodynamic control into 3D and 2D periodic arrays, and provides molecular principles to predict the supramolecular structure of electronically active components.

Cell membrane permeable fluorescent perylene bisimide derivatives for cell lysosome imaging

The cellular uptake of Lyso-APBIprobes is improved by PEG chains, and the double morpholine moieties make Lyso-APBI probes have higher acid activation ratio and better cell lysosome specificity.

The synthesis and structural characterization of twin liquid crystalline perylenebisimides

A smectic to nematic LC phase switch is achieved by changing one methylene unit in the central spacer segment.

Arylmercapto Substituted Tetraazaperopyrene Derivatives and Their Oxidation to Tetrasulfones: Photophysics and Electrochemistry

Fourfold arylmercapto substituted tetraazaperopyrene (TAPP) derivatives were obtained by direct nucleophilic substitution of the tetrabrominated TAPP or via Cu-catalyzed S-C coupling. These new materials display a characteristic bathochromic shift of their visible absorption and emission bands by ca. 200 nm compared to the unsubstituted parent compound. Two of the sulfide derivatives were oxidized with periodate to give their corresponding sulfones.

1,6- and 1,7-Regioisomers of Highly Soluble Amino-Substituted Perylene Tetracarboxylic Dianhydrides: Synthesis, Optical and Electrochemical Properties

1,6- and 1,7-regioisomers of diamino-substituted perylene tetracarboxylic dianhydrides (PTCDs) with different n-alkyl chain lengths (n = 6, 12 or 18) were synthesized and characterized by NMR spectroscopy and high-resolution mass spectrometry. These dyes are highly soluble in most organic solvents and even in nonpolar solvents, such as hexane. To the best of our knowledge, this is the first time the 1,6-diamino-substituted PTCDs (2a-2c) have been obtained in pure form. The regioisomers 1a-1c (1,7-) and 2a-2c (1,6-) exhibit significant differences in their optical characteristics. In addition to the longest wavelength absorption band at around 674 nm, 2a-2c exhibit another shoulder band at ca. 600 nm, and consequently, cover a large part of the visible region relative to those of 1a-1c. Upon excitation, 2a-2c also show larger dipole moment changes than those of 1a-1c; the dipole moments of all compounds have been estimated using Lippert-Mataga equation. Moreover, all the dyes show a unique charge transfer emission in the near-infrared region, of which the peak wavelengths exhibit strong solvatochromism. They all exhibit one irreversible one-electron oxidation and two quasi-reversible one-electron reductions in dichloromethane at modest potentials. Complementary density functional theory calculations performed on these chromophores are reported in order to rationalize their electronic structure and optical properties.