Highly Enantioselective Separation Using a Supported Liquid Membrane Encapsulating Surfactant−Enzyme Complex

A polymer inclusion membrane composed of the binary carrier PC-88A and Versatic 10 for the selective separation and recovery of Sc

This study reports on the selective separation of scandium (Sc) from other rare earth metals (REMs) using a polymer inclusion membrane (PIM). The PIM prepared with PC-88A (2-ethylhexyl hydrogen-2-ethylhexylphosphonate) alone as the carrier showed high extractability but the poor back-extraction of the extracted Sc³⁺ ions did not allow the transport of these ions to the receiving solution of a membrane transport system. To overcome this problem, a novel approach was introduced using a mixture of carriers that allowed Sc³⁺ transport into the receiving solution. A cellulose triacetate (CTA) based PIM containing both PC-88A and Versatic 10 (decanoic acid) as carriers and dioctyl phthalate (DOP) as a plasticizer was prepared for the selective separation of Sc³⁺ from other REM ions in nitrate media. The membrane composition was optimized and the effect of operational parameters such as pH of the feed solution and composition of the receiving solution was explored. The flux at the membrane/feed solution interface was found to depend significantly on the carrier concentration in the PIM, pH of the feed solution and the receiving solution acidity. The newly developed PIM allowed quantitative and selective transport of Sc³⁺ thus demonstrating its suitability for the selective recovery of this metal.

This study reports on the selective separation of scandium (Sc) from other rare earth metals (REMs) using a polymer inclusion membrane (PIM).

Solid-in-oil dispersion: a novel core technology for drug delivery systems

Drug delivery systems using a solid-in-oil (S/O) dispersion as a core technology have advanced significantly over the past ten years. A novel, effective and practical preparation method for a S/O dispersion was originally established in 1997 as a tool for enzymatic catalysis in organic media. This oil-based dispersion containing proteins in non-aqueous media had great potential for applications to other research with one of the most successful being its adaptation as a drug delivery system. The history and features of novel processes for preparing S/O dispersions are presented in this article. In addition, recent research into the use of S/O dispersions for innovative oral and skin drug delivery systems is discussed.

Enantioselective separations using chiral supported liquid crystalline membranes

Porous and nonporous supported liquid crystalline membranes were produced by impregnating porous cellulose nitrate supports with cholesteric liquid crystal (LC) materials consisting of 4-cyano-4'-pentylbiphenyl (5CB) mixed with a cholesterol-based dopant (cholesteryl oleyl carbonate [COC], cholesteryl nonanoate [CN], or cholesteryl chloride [CC]). The membranes exhibit selectivity for R-phenylglycine and R-1-phenylethanol because of increased interactions between the S enantiomers and the left-handed cholesteric phase. The selectivity of both phenylglycine and 1-phenylethanol in 5CB/CN membranes decreases with effective pore diameter while the permeabilities increase, as expected. Phenylglycine, which is insoluble in the LC phase, exhibits no transport in the nonporous (completely filled) membranes; however, 1-phenylethanol, which is soluble in the LC phase, exhibits transport but negligible enantioselectivity. The enantioselectivity for 1-phenylethanol was higher (1.20 in 5CB/COC and 5CB/CN membranes) and the permeability was lower in the cholesteric phase than in the isotropic phase. Enantioselectivity was also higher in the 5CB/COC cholesteric phase than in the nematic phase of undoped 5CB (1.03). Enantioselectivity in the cholesteric phase of 5CB doped with CC (1.1), a dopant lacking hydrogen bonding groups, was lower than in the 5CB/COC phases. Finally, enantioselectivity increases with the dopant concentration up to a plateau value at approximately 17 mol%.

Molecularly imprinted thin film self-assembled on piezoelectric quartz crystal surface by the sol–gel process for protein recognition

A novel method of combining sol-gel and self-assembly technology to prepare a human serum albumin (HSA)-imprinted film on the surface of piezoelectric quartz crystal (PQC) Au-electrode modified with thioglycolic acid was described in this paper. The imprinting process was characterized by using the piezoelectric quartz crystal impedance (PQCI) technique and electrochemical impedance technique. Scanning electron microscope (SEM) was employed to characterize the surface morphology of the resultant imprinted film. The piezoelectric technique and electrochemical impedance technique were also employed to investigate the binding performance of the sol-gel-imprinted film with the template protein. The results showed that the imprinted PQC film can give selective recognition to the template protein. The effects of salts and solvents on the binding capacity of the imprinted film with protein were discussed in detail. Other influencing factors (temperature and pH) have also been investigated. This self-assembly sol-gel imprinting technique was proved to be an alternative method for the preparation of biomacromolecule-imprinted thin film.

Recent advances in analytical chemistry--a material approach

Advancements of materials research have profound direct impacts on developments in analytical chemistry and may hold the key to improvement of existing or new techniques at present times and near future. Applications of materials in analytical chemistry are reviewed, with focus on sensors, separations and extraction techniques. This review aims to survey examples of interesting works carried out in the last five years over a broad spectrum of materials classified as hybrids, nanomaterials and biomolecular materials.

Optical resolution of various amino acids using a supported liquid membrane encapsulating a surfactant-protease complex

We have encapsulated a surfactant-protease complex (the main protease used being alpha-chymotrypsin) in an organic phase of a supported liquid membrane (SLM) for the optical resolution of various amino acids. L-Isomers of amino acids were enantioselectively permeated through the SLM. The mechanism of the amino acid permeation through the SLM was considered to be as follows; an L-amino acid was enantioselectively esterified with ethanol by a surfactant-protease complex encapsulated in the SLM, and the resulting L-amino acid ethyl ester dissolved into the organic phase of the SLM and diffused across the SLM. Another surfactant-alpha-chymotrypsin complex in the receiving phase catalyzed ester hydrolysis to produce the initial L-amino acid and ethanol, which are water-soluble. Thus, the L-amino acid was selectively transported to the receiving phase through the SLM on the basis of the molecular recognition of the surfactant-protease complex in the SLM. It was found that the catalytic activity and enantioselectivity of the surfactant-protease complex governed the permeate flux of amino acids and the enantiomeric excess in the membrane separation.

A Supported Liquid Membrane Encapsulating a Surfactant-Lipase Complex for the Selective Separation of Organic Acids

We have developed a novel, lipase-facilitated, supported liquid membrane (SLM) for the selective separation of organic acids by encapsulating a surfactant-lipase complex in the liquid membrane phase. This system exhibited a high transport efficiency for 3-phenoxypropionic acid and enabled the selective separation of organic acids due to the different solubilities of the acids in the organic phase and the variable substrate specificity of the surfactant-lipase complex in the liquid membrane phase. We found that various parameters, such as the amount of surfactant-lipase complex in the SLM, the lipase concentration in the receiving phase, and the ethanol concentration in the feed phase, affected the transport behavior of organic acids. The optimum conditions were 5 g L(-1) of the surfactant-CRL complex in the SLM (CRL=lipase from Candida rugosa), 8 g L(-1) of PPL in the receiving phase (PPL=lipase from porcine pancreas), and an ethanol concentration of 50 vol %. Furthermore, we achieved high enantioselective transport of (S)-ibuprofen attributable to the enantioselectivity of the surfactant-CRL complex.