Self-Assembly of Designed Oligomeric Siloxanes with Alkyl Chains into Silica-Based Hybrid Mesostructures

pH Modulation of Super-Assembled Heteromembranes for Sustainable Chiral Sensing

Enantioselective sensing and separation represent formidable challenges across a diverse range of scientific domains. The advent of hybrid chiral membranes offers a promising avenue to address these challenges, capitalizing on their unique characteristics, including their heterogeneous structure, porosity, and abundance of chiral surfaces. However, the prevailing fabrication methods typically involve the initial preparation of achiral porous membranes followed by subsequent modification with chiral molecules, limiting their synthesis flexibility and controllability. Moreover, existing chiral membranes struggle to achieve coupled-accelerated enantioseparation (CAE). Here, we report a replacement strategy to controllably produce mesoscale and chiral silica-carbon (MCSC) hybrid membranes that comprise chiral pores by interfacial superassembly on a macroporous alumina (AAO) membrane, in which both ion- and enantiomers can be effectively and selectively transported across the membrane. As a result, the heterostructured hybrid membrane (MCSC/AAO) exhibits enhanced selectivity for cations and enantiomers of amino acids, achieving CAE for amino acids with an isoelectric point (pI) exceeding 7. Interestingly, the MCSC/AAO system demonstrates enhanced pH-sensitive enantioseparation compared to chiral mesoporous silica/AAO (CMS/AAO) with significant improvements of 78.14, 65.37, and 14.29% in the separation efficiency, separation factor, and permeate flux, respectively. This work promises to advance the synthesis of two or more component-integrated chiral nanochannels with multifunctional properties and allows a better understanding of the origins of the homochiral hybrid membranes.

A catalyst- and additive-free synthesis of alkoxyhydrosiloxanes from silanols and alkoxyhydrosilanes

A convenient method for the selective synthesis of alkoxyhydrosiloxanes that bear SiH and SiOR² groups on the same silicon atom, R¹₃Si-O-SiR³_2-n(OR²)_nH (n = 0, 1, or 2), via a simple catalyst- and additive-free dealcoholization reaction between silanols and alkoxyhydrosilanes has been developed. These alkoxyhydrosiloxanes can be easily converted into Si(OR²)₃-containing siloxanes by zinc catalyzed alkoxylation and alkoxy-containing silphenylene polymers by platinum catalyzed hydrosilylation.

A catalytic study of water dispersed gold nanoparticles for the hydrolytic oxidation of diorganosilanes – en route formation of a Pickering catalyst and synthesis of tetraorganodisiloxane-1,3-diols

This study unfolds the formation of a AuNP-stabilized Pickering catalyst (PIC) en route to the hydrolytic oxidation of diorganosilanes. The method offers a viable route for the synthesis of disiloxane-1,3-diols.

Synthesis of Polycyclic and Cage Siloxanes by Hydrolysis and Intramolecular Condensation of Alkoxysilylated Cyclosiloxanes

The controlled synthesis of oligosiloxanes with well-defined structures is important for the bottom-up design of siloxane-based nanomaterials. This work reports the synthesis of various polycyclic and cage siloxanes by the hydrolysis and intramolecular condensation of monocyclic tetra- and hexasiloxanes functionalized with various alkoxysilyl groups. An investigation of monoalkoxysilylated cyclosiloxanes revealed that intramolecular condensation occurred preferentially between adjacent alkoxysilyl groups to form new tetrasiloxane rings. The study of dialkoxy- and trialkoxysilylated cyclotetrasiloxanes revealed multistep intramolecular condensation reactions to form cubic octasiloxanes in relatively high yields. Unlike conventional methods starting from organosilane monomers, intramolecular condensation enables the introduction of different organic substituents in controlled arrangements. So-called Janus cubes have been successfully obtained, that is, Ph₄ R₄ Si₈ O₁₂ , in which R=Me, OSiMe₃ , and OSiMe₂ Vi (Vi=vinyl). These findings will enable the creation of siloxane-based materials with diverse functions.

Protecting and Leaving Functions of Trimethylsilyl Groups in Trimethylsilylated Silicates for the Synthesis of Alkoxysiloxane Oligomers

The concept of protecting groups and leaving groups in organic synthesis was applied to the synthesis of siloxane-based molecules. Alkoxy-functionalized siloxane oligomers composed of SiO₄ , RSiO₃ , or R₂ SiO₂ units were chosen as targets (R: functional groups, such as Me and Ph). Herein we describe a novel synthesis of alkoxysiloxane oligomers based on the substitution reaction of trimethylsilyl (TMS) groups with alkoxysilyl groups. Oligosiloxanes possessing TMS groups were reacted with alkoxychlorosilane in the presence of BiCl₃ as a catalyst. TMS groups were substituted with alkoxysilyl groups, leading to the synthesis of alkoxysiloxane oligomers. Siloxane oligomers composed of RSiO₃ and R₂ SiO₂ units were synthesized more efficiently than those composed of SiO₄ units, suggesting that the steric hindrance around the TMS groups of the oligosiloxanes makes a difference in the degree of substitution. This reaction uses TMS groups as both protecting and leaving groups for SiOH/SiO^- groups.

Hierarchical TiO2 /SnO2 Hollow Spheres Coated with Graphitized Carbon for High-Performance Electrochemical Li-Ion Storage

A self-templated strategy is developed to fabricate hierarchical TiO₂ /SnO₂ hollow spheres coated with graphitized carbon (HTSO/GC-HSs) by combined sol-gel processes with hydrothermal treatment and calcination. The as-prepared mesoporous HTSO/GC-HSs present an approximate yolk-double-shell structure, with high specific area and small nanocrystals of TiO₂ and SnO₂ , and thus exhibit superior electrochemical reactivity and stability when used as anode materials for Li-ion batteries. A high reversible specific capacity of about 310 mAh g^-1 at a high current density of 5 A g^-1 can be achieved over 500 cycles indicating very good cycle stability and rate performance.

The controllable construction and properties characterization of organic–inorganic hybrid materials based on benzoxazine-bridged polysilsesquioxanes

Some controllable morphology organic–inorganic hybrid materials have been prepared via the homopolymerization of benzoxazine-bridged polysilsesquioxanes precursors with different degrees of the triethoxysilane hydrolysis condensation.

Hierarchically porous materials: synthesis strategies and structure design

This review addresses recent advances in synthesis strategies of hierarchically porous materials and their structural design from micro-, meso- to macro-length scale.

β-Peptide bundles: Design. Build. Analyze. Biosynthesize

Peptides containing β-amino acids are unique non-natural polymers known to assemble into protein-like tertiary and quaternary structures. When composed solely of β-amino acids, the structures formed, defined assemblies of 14-helices called β-peptide bundles, fold cooperatively in water solvent into unique and discrete quaternary assemblies that are highly thermostable, bind complex substrates and metal ion cofactors, and, in certain cases, catalyze chemical reactions. In this Perspective, we recount the design and elaboration of β-peptide bundles and provide an outlook on recent, unexpected discoveries that could influence research on β-peptides and β-peptide bundles (and β-amino acid-containing proteins) for decades to come.

Preparation and unique dielectric properties of nanoporous materials with well-controlled closed-nanopores

Although general porous materials have a low dielectric constant, their uncontrollable opened porous structure results in high dielectric loss and poor barrier properties, thus limiting their application as interconnect dielectrics.

Bottom-up Fabrication of Graphene on Silicon/Silica Substrate via a Facile Soft-hard Template Approach

In this work, a novel soft-hard template method towards the direct fabrication of graphene films on silicon/silica substrate is developed via a tri-constituent self-assembly route. Using cetyl trimethyl ammonium bromide (CTAB) as a soft template, silica (SiO₂) from tetramethoxysilane as a hard template, and pyrene as a carbon source, the self-assembly process allows the formation of a sandwich-like SiO₂/CTAB/pyrene composite, which can be further converted to high quantity graphene films with a thickness of ~1 nm and a size of over 5 μm by thermal treatment. The morphology and thickness of the graphene films can be effectively controlled through the adjustment of the ratio of pyrene to CTAB. Furthermore, a high nonlinear refractive index n₂ of ~10⁻¹² m² W⁻¹ is measured from graphene/silica hybrid film, which is six orders of magnitude larger than that of silicon and comparable to the graphene from chemical vapor deposition process.

Synthesis of lanthanide-based SBA-15 mesoporous hybrids by a novel route

The ligand N

Ordered hybrids from template-free organosilane self-assembly

Despite considerable achievements over the last two decades, nonporous organic-inorganic hybrid materials are mostly amorphous, especially in the absence of solvothermal processes. The organosilane self-assembly approach is one of the few opportunities for creating a regular assembly of organic and inorganic moieties. Additionally, well-established organosilicon chemistry enables the introduction of numerous organic functionalities. The synthesis of periodically ordered hybrids relies on mono-, bis-, or multisilylated organosilane building blocks self-assembling into hybrid mesostructures or superstructures, subsequently cross-linked by siloxane Si-O-Si condensation. The general synthesis procedure is template-free and one-step. However, three concurrent processes underlie the generation of self-organized hybrid networks: thermodynamics of amphiphilic aggregation, dynamic self-assembly, and kinetically controlled sol-gel chemistry. Hence, the set of experimental conditions and the precursor structure are of paramount importance in achieving long-range order. Since the first developments in the mid-1990s, the subject has seen considerable progress leading to many innovative advanced nanomaterials providing promising applications in membranes, pollutant remediation, catalysis, conductive coatings, and optoelectronics. This work reviews, comprehensively, the primary evolution of this expanding field of research.

Synthesis of a multifunctional alkoxysiloxane oligomer

The siloxane bonds of oligomer 1 were not cleaved by hydrolysis, indicating the suitability of 1 for controlled hybrid preparation.

Soft templating strategies for the synthesis of mesoporous materials: inorganic, organic-inorganic hybrid and purely organic solids

With the discovery of MCM-41 by Mobil researchers in 1992 the journey of the research on mesoporous materials started and in the 21st century this area of scientific investigation have extended into numerous branches, many of which contribute significantly in emerging areas like catalysis, energy, environment and biomedical research. As a consequence thousands of publications came out in large varieties of national and international journals. In this review, we have tried to summarize the published works on various synthetic pathways and formation mechanisms of different mesoporous materials viz. inorganic, organic-inorganic hybrid and purely organic solids via soft templating pathways. Generation of nanoscale porosity in a solid material usually requires participation of organic template (more specifically surfactants and their supramolecular assemblies) called structure-directing agent (SDA) in the bottom-up chemical reaction process. Different techniques employed for the syntheses of inorganic mesoporous solids, like silicas, metal doped silicas, transition and non-transition metal oxides, mixed oxides, metallophosphates, organic-inorganic hybrids as well as purely organic mesoporous materials like carbons, polymers etc. using surfactants are depicted schematically and elaborately in this paper. Moreover, some of the frontline applications of these mesoporous solids, which are directly related to their functionality, composition and surface properties are discussed at the appropriate places.

Integrative and intermediate self-assembly of multi-walled hybrid nanotubes for catanionic biomimetics

Hollow cylindrical multi-walled hybrid nanotubes go through dynamic growth and subsequent disappearance during the biomimetic fabrication of hexagonal calcite platelets, simulating the in vivo purpose-driven self-assembly of tubular plasma-membrane calcium-ion channels for biomaterials to adapt, respond and repair.

Deposition of dense siloxane monolayers from water and trimethoxyorganosilane vapor

A convenient, laboratory-scale method for the vapor deposition of dense siloxane monolayers onto oxide substrates was demonstrated. This method was studied and optimized at 110 °C under reduced pressure with the vapor of tetradecyltris(deuteromethoxy)silane, (CD(3)O)(3)Si(CH(2))(13)CH(3), and water from the dehydration of MgSO(4)·7H(2)O. Ellipsometric thicknesses, water contact angles, Fourier transform infrared (FTIR) spectroscopy, and electrochemical capacitance measurements were used to probe monolayer densification. The CD(3) stretching mode in the FTIR spectrum was monitored as a function of the deposition time and amounts of silane and water reactants. This method probed the unhydrolyzed methoxy groups on adsorbed silanes. Excess silane and water were necessary to achieve dense, completely hydrolyzed monolayers. In the presence of sufficient silane, an excess of water above the calculated stoichiometric amount was necessary to hydrolyze all methoxy groups and achieve dense monolayers. The excess water was partially attributed to the reversibility of the hydrolysis of the methoxy groups.

Proton exchange membranes for application in fuel cells: grafted silica/SPEEK nanocomposite elaboration and characterization

Hydrogen technologies and especially fuel cells are key components in the battle to find alternate sources of energy to the highly polluting and economically constraining fossil fuels in an aim to preserve the environment. The present paper shows the synthesis of surface functionalized silica nanoparticles, which are used to prepare grafted silica/SPEEK nanocomposite membranes. The nanoparticles are grafted either with hexadecylsilyl or aminopropyldimethylsilyl moieties or both. The synthesized particles are analyzed using XRD, NMR, TEM, and DLS to collect information on the nature of the particles and the functional groups, on the particle sizes, and on the hydrophilic/hydrophobic character. The composite membranes prepared using the synthesized particles and two SPEEK polymers with sulfonation degrees of 69.4% and 85.0% are characterized for their proton conductivity and water uptake properties. The corresponding curves are very similar for the composites prepared with both polymers and the nanoparticles bearing the two functional groups. The composites prepared with the nanoparticles bearing solely the aminopropyldimethylsilyl moiety exhibit lower conductivity and water uptake, possibly due to higher interaction of the polymer sulfonic acid sites with the amine groups. The composites prepared with the nanoparticles bearing solely the hexadecylsilyl moiety were not further investigated because of very high particles segregation. A study of the proton conductivity as a function of temperature was performed on selected membranes and showed that nanocomposites made with nanoparticles bearing both functional moieties have a higher conductivity at higher temperatures.

Alignment control of self-assembled organosiloxane films derived from alkyloligosiloxane amphiphiles

Transparent and continuous organosiloxane films with macroscopically oriented mesostructures were prepared by dip-coating a substrate, on which a rubbing-treated polyimide film is formed, with hydrolyzed solutions of oligosiloxane precursors (C(n)H(2n+1)Si(OSi(OMe)(3))(3)). The structure of the films depends on the alkyl chain length of the precursors such that films with two-dimensional (2D) hexagonal and lamellar structures are obtained when n = 10 and 16, respectively. In the 2D hexagonal film, the cylindrical organic moieties are aligned perpendicular to the rubbing direction in the plane of the film over the whole film thickness. On the other hand, the lamellar film changes its orientation with increased distance from the substrate surface. While the orientation of the lamellae at the surface of the film is parallel to the film-air interface, they are perpendicularly aligned in the vicinity of the substrate with the layer normal parallel to the rubbing direction. The observed unique orientation of the mesostructures is attributed to the anisotropic hydrophobic interactions between the alkyl chains of the hydrolyzed oligosiloxane molecules and the polymer chains of the polyimide layer oriented by the rubbing treatment.

Sol-gel synthesis of rodlike polysilsesquioxanes forming regular higher-ordered nanostructure

Rodlike polysilsesquioxanes forming regular higher-ordered nanostructure such as hexagonal phase were prepared by sol-gel reaction of organotrimethoxysilanes having amino groups in aqueous solutions of inorganic strong acids. The XRD profiles of the resulting polysilsesquioxanes showed three peaks with the d-value ratio of 1 : 1/√3 : ½, indicating that these polysilsesquioxanes have hexagonal phase. The diffraction peaks shifted by changing the humidity. In addition, the d-values of diffraction peaks increased by ion-exchange reaction with organic compounds such as fatty acid salt and anionic polymer. Therefore, this hexagonal phase originated from the stacking of rodlike polysilsesquioxanes with Si–O–Si framework at the core and ammonium groups extruding outside. This Si–O–Si framework probably formed a ladder or ladder-related structure, which was characterized by solid-state 29Si NMR and IR spectrometries.