Controlled synthesis and self-assembly of CeO2 nanocubes

Investigation of the Dual-Regulatory Mechanism of Zr in MnRE1-xZrxO2+δ Oxide Catalysts for NO Oxidation

Utilizing Diesel Oxidation Catalysts (DOC) to partially oxidize NO to NO2 is a crucial step in controlling NOx emissions from diesel engines. However, enhancing both catalytic activity and hydrothermal stability remains a significant challenge. Benefiting from abundant asymmetric oxygen vacancies and increased Mn4+ content, MnRE0.5Zr0.5 exhibits superior NO oxidation performance (T63 = 337 °C) and hydrothermal aging resistance (T52 = 340 °C) compared to the undoped sample (T53 = 365 °C). XPS, Raman, TPR, and XAS are employed to verify the elevation of oxygen vacancy concentration and Mn valence state modulation due to Zr introduction. Furthermore, compared to MnRE (1.36 eV), the formation energy of oxygen vacancies in MnRE0.5Zr0.5 is significantly reduced (0.17 eV). This work elucidates the dual regulatory role of Zr in the Mn-RE-Zr ternary system, providing theoretical support and guidance for the design of catalysts for atmospheric pollutant purification and industrial catalysis.

Coherent Erbium Spin Defects in Colloidal Nanocrystal Hosts

We demonstrate nearly a microsecond of spin coherence in Er3+ ions doped in cerium dioxide nanocrystal hosts, despite a large gyromagnetic ratio and nanometric proximity of the spin defect to the nanocrystal surface. The long spin coherence is enabled by reducing the dopant density below the instantaneous diffusion limit in a nuclear spin-free host material, reaching the limit of a single erbium spin defect per nanocrystal. We observe a large Orbach energy in a highly symmetric cubic site, further protecting the coherence in a qubit that would otherwise rapidly decohere. Spatially correlated electron spectroscopy measurements reveal the presence of Ce3+ at the nanocrystal surface, which likely acts as extraneous paramagnetic spin noise. Even with these factors, defect-embedded nanocrystal hosts show tremendous promise for quantum sensing and quantum communication applications, with multiple avenues, including core-shell fabrication, redox tuning of oxygen vacancies, and organic surfactant modification, available to further enhance their spin coherence and functionality in the future.

Two decades of ceria nanoparticle research: structure, properties and emerging applications

Cerium oxide nanoparticles (CeNPs) are versatile materials with unique and unusual properties that vary depending on their surface chemistry, size, shape, coating, oxidation states, crystallinity, dopant, and structural and surface defects. This review encompasses advances made over the past twenty years in the development of CeNPs and ceria-based nanostructures, the structural determinants affecting their activity, and translation of these distinct features into applications. The two oxidation states of nanosized CeNPs (Ce3+/Ce4+) coexisting at the nanoscale level facilitate the formation of oxygen vacancies and defect states, which confer extremely high reactivity and oxygen buffering capacity and the ability to act as catalysts for oxidation and reduction reactions. However, the method of synthesis, surface functionalization, surface coating and defects are important factors in determining their properties. This review highlights key properties of CeNPs, their synthesis, interactions, and reaction pathways and provides examples of emerging applications. Due to their unique properties, CeNPs have become quintessential candidates for catalysis, chemical mechanical planarization (CMP), sensing, biomedical applications, and environmental remediation, with tremendous potential to create novel products and translational innovations in a wide range of industries. This review highlights the timely relevance and the transformative potential of these materials in addressing societal challenges and driving technological advancements across these fields.

Unveiling the Function of Oxygen Vacancy on Facet-Dependent CeO2 for the Catalytic Destruction of Monochloromethane: Guidance for Industrial Catalyst Design

Secondary pollution remains a critical challenge for the catalytic destruction of chlorinated volatile organic compounds (CVOCs). By employing experimental studies and theoretical calculations, we provide valuable insights into the catalytic behaviors exhibited by ceria rods, cubes, and octahedra for monochloromethane (MCM) destruction, shedding light on the elementary reactions over facet-dependent CeO2. Our findings demonstrate that CeO2 nanorods with the (110) facet exhibit the best performance in MCM destruction, and the role of vacancies is mainly to form a longer distance (4.63 Å) of frustrated Lewis pairs (FLPs) compared to the stoichiometric surface, thereby enhancing the activation of MCM molecules. Subsequent molecular orbital analysis showed that the adsorption of MCM mainly transferred electrons from the 3σ and 4π* orbitals to the Ce 4f orbitals, and the activation was mainly caused by weakening of the 3σ bonding orbitals. Furthermore, isotopic experiments and theoretical calculations demonstrated that the hydrogen chloride generated is mainly derived from methyl in MCM rather than from water, and the primary function of water is to form excess saturated H on the surface, facilitating the desorption of generated hydrogen chloride.

Heterostructured Co/CeO2-Decorating N-Doped Porous Carbon Nanocubes as Efficient Sulfur Hosts with Enhanced Rate Capability and Cycling Durability toward Room-Temperature Na-S Batteries

Room-temperature sodium-sulfur (RT Na-S) batteries have gained significant interest thanks to their satisfactory energy density and abundant earth resources. Nevertheless, practical implementations of RT Na-S batteries are still impeded by serious shuttle effects of sodium polysulfide (NaPS) intermediates, sluggish redox kinetics of cathodes, and poor electronic conductivity from S-species. To solve these problems, heterostructured Co/CeO2-decorating N-doped porous carbon nanocubes (Co/CeO2-NPC) are constructed as a S support, which integrates the strong adsorption and fast conversion of NaPSs, together with superior electronic conductivity. Consequently, the as-synthesized S@Co/CeO2-NPC cathode for RT Na-S batteries exhibits improved rate performance (1275, 561.1, and 485 mAh g-1 at 0.1, 5, and 10 C, respectively) and superior cyclic durability (capacity degeneration of 0.027% per cycle after 1000 cycles at 5 C). Such a S cathode combining a heterostructure interface, hierarchical porous carbon nanocubes, and polar compositions can considerably increase electronic conductivity and promote NaPS adsorption and conversion, achieving superior performance toward RT Na-S batteries.

Using Ex Situ and In Situ HERFD-XANES to Reveal the Superior Oxidation and Reduction Cycling of Ceria Nanocubes Dispersed in Silica Aerogel

The oxygen storage capacity of ceria-based catalytic materials is influenced by their size, morphology, and surface structure, which can be tuned using surfactant-mediated synthesis. In particular, the cuboidal morphology exposes the most reactive surfaces; however, when the capping agent is removed, the nanocubes can agglomerate and limit the available reactive surface. Here, we study ceria nanocubes, lanthanum-doped ceria nanocubes, and ceria nanocubes embedded inside a highly porous silica aerogel by high-energy resolution fluorescence detection-X-ray absorption near edge spectroscopy at the Ce L3 edge. In situ measurements showed an increased reversibility of redox cycles in ceria nanocubes when embedded in the aerogel, demonstrating enhanced reactivity due to the retention of reactive surfaces. These aerogel nanocomposites show greater improvement in the redox capacity and increased thermal stability of this catalytic material compared to the surfactant-capped nanocubes. Ex situ measurements were also performed to study the effect of lanthanum doping on the cerium oxidation state in the nanocubes, indicating a higher proportion of Ce4+ compared to that of the undoped ceria nanocubes.

Intrinsic Strain-Mediated Ultrathin Ceria Nanoantioxidant

Metal oxide nanozymes have emerged as the most efficient and promising candidates to mimic antioxidant enzymes for treatment of oxidative stress-mediated pathophysiological disorders, but the current effectiveness is unsatisfactory due to insufficient catalytic performance. Here, we report for the first time an intrinsic strain-mediated ultrathin ceria nanoantioxidant. Surface strain in ceria with variable thicknesses and coordinatively unsaturated Ce sites was investigated by theoretical calculation analysis and then was validated by preparing ∼1.2 nm ultrathin nanoplates with ∼3.0% tensile strain in plane/∼10.0% tensile strain out of plane. Compared with nanocubes, surface strain in ultrathin nanoplates could enhance the covalency of the Ce-O bond, leading to increasing superoxide dismutase (SOD)-mimetic activity by ∼2.6-fold (1533 U/mg, in close proximity to that of natural SOD) and total antioxidant activity by ∼2.5-fold. As a proof of concept, intrinsic strain-mediated ultrathin ceria nanoplates could boost antioxidation for improved ischemic stroke treatment in vivo, significantly better than edaravone, a commonly used clinical drug.

Nanoparticle Imprint Lithography: From Nanoscale Metrology to Printable Metallic Grids

Large scale and low-cost nanopatterning of materials is of tremendous interest for optoelectronic devices. Nanoimprint lithography has emerged in recent years as a nanofabrication strategy that is high-throughput and has a resolution comparable to that of electron-beam lithography (EBL). It is enabled by pattern replication of an EBL master into polydimethylsiloxane (PDMS), that is then used to pattern a resist for further processing, or a sol-gel that could be calcinated into a solid material. Although the sol-gel chemistry offers a wide spectrum of material compositions, metals are still difficult to achieve. This gap could be bridged by using colloidal nanoparticles as resist, but deep understanding of the key parameters is still lacking. Here, we use supported metallic nanocubes as a model resist to gain fundamental insights into nanoparticle imprinting. We uncover the major role played by the surfactant layer trapped between nanocubes and substrate, and measure its thickness with subnanometer resolution by using gap plasmon spectroscopy as a metrology platform. This enables us to quantify the van der Waals (VDW) interactions responsible for the friction opposing the nanocube motion, and we find that these are almost in quantitative agreement with the Stokes drag acting on the nanocubes during nanoimprint, that is estimated with a simplified fluid mechanics model. These results reveal that a minimum thickness of surfactant is required, acting as a spacer layer mitigating van der Waals forces between nanocubes and the substrate. In the light of these findings we propose a general method for resist preparation to achieve optimal nanoparticle mobility and show the assembly of printable Ag and Au nanocube grids, that could enable the fabrication of low-cost transparent electrodes of high material quality upon nanocube epitaxy.

Facet-Controlled Synthesis of CeO2 Nanoparticles for High-Performance CeO2 Nanoparticle/SnO2 Nanosheet Hybrid Gas Sensors

CeO2 nanocubes with metastable {100} facets and CeO2 nanooctahedrons with the most stable {111} facets are herein fabricated by controlling the morphology and facets of CeO2 nanoparticles. SnO2 nanosheet-based assembled films coated with these CeO2 nanocubes or CeO2 nanooctahedrons yield {100} CeO2 nanocubes/SnO2 nanosheets and {111} CeO2 nanooctahedron/SnO2 nanosheet hybrid gas sensors, respectively. The hybrid sensors with CeO2 nanoparticles exhibited enhanced sensing responses to numerous chemical species relative to a pristine SnO2 nanosheet gas sensor, including acetone, hydrogen, ethanol, ammonia, acetaldehyde, and allyl mercaptan. In particular, the responses of {100} CeO2 nanocubes/SnO2 nanosheets and {111} CeO2 nanooctahedron/SnO2 nanosheet gas sensors to acetone or allyl mercaptan were 6.8 and 10.3 times higher, respectively, than that of the pristine SnO2 nanosheet gas sensor. Furthermore, the sensor response to ammonia was 2.5 times higher than that of a commercial volatile organic compound (VOC) gas sensor (TGS2602, Figaro Engineering Inc.). The CeO2 nanocube-based sensor with exposed metastable {100} facets promotes the adsorption and oxidation of VOCs owing to the higher surface energy of the metastable {100} facets and therefore exhibits a higher sensing performance than the CeO2 nanooctahedron-based sensor with an exposed {111} facet. The developed sensors show excellent potential for the detection of gas markers in human breath and perspiration for disease diagnosis.

Tuning the coordination environment of Fe atoms enables 3D porous Fe/N-doped carbons as bifunctional electrocatalyst for rechargeable zinc-air battery

As one of the most promising candidates for power sources, the rechargeable Zn-air batteries have attracted much attention due to their high energy density. However, Zn-air batteries suffer from sluggish kinetics of oxygen reduction (ORR) and oxygen evolution reaction (OER) during the discharge and charge process. Herein, a FeN₂-doped carbon with a unique three-dimensional (3D) porous structure (CeO₂-FeNC-5) was synthesized as an electrocatalyst for Zn-air batteries by one-step pyrolysis and introducing CeO₂ to tune the coordination environment of Fe atoms. Extended X-ray absorption fine structure (EXAFS) results indicate that the introduction of CeO₂ can convert FeN₃ moieties into FeN₂ moieties. The CeO₂-FeNC-5 exhibits a more positive half-wave potential of 0.902 V for ORR, and a low overpotential of 0.327 V at 10 mA cm^-2 for OER. Furthermore, the Zn-air battery with CeO₂-FeNC-5 achieve a maximum power density (169 mW cm^-2), a high open voltage platform (1.47 V) and superior cycling stability (200 h). The unique 3D porous structure provides channels for mass transport and exposes sufficient active sites to facilitate the ORR and OER processes. Calculations prove that FeN₂ moieties are beneficial to O₂ adsorption on Fe/N-doped carbon surface. This work provides an effective strategy for designing and synthesizing FeN_x-doped carbon matrix electrocatalysts for sustainable metal-air batteries.

Deciphering the Molecular Mechanism of Substrate-Induced Assembly of Gold Nanocube Arrays toward an Accelerated Electrocatalytic Effect Employing Heterogeneous Diffusion Field Confinement

The complex electrocatalytic performance of gold nanocubes (AuNCs) is the focus of this work. The faceted shapes of AuNCs and the individual assembly processes at the electrode surfaces define the heterogeneous conditions for the purpose of electrocatalytic processes. Topographic and electron imaging demonstrated slightly rounded AuNC (average of 38 nm) assemblies with sizes of ≤1 μm, where the dominating patterns are (111) and (200) crystallographic planes. The AuNCs significantly impact the electrochemical performance of the investigated electrode [indium-tin oxide (ITO), glassy carbon (GC), and bulk gold] systems driven by surface electrons promoting the catalytic effect. Cyclic voltammetry in combination with scanning electrochemical microscopy allowed us to decipher the molecular mechanism of substrate-induced electrostatic assembly of gold nanocube arrays, revealing that the accelerated electrocatalytic effect should be attributed to the confinement of the heterogeneous diffusion fields with tremendous electrochemically active surface area variations. AuNC drop-casting at ITO, GC, and Au led to various mechanisms of heterogeneous charge transfer; only in the case of GC did the decoration significantly increase the electrochemically active surface area (EASA) and ferrocyanide redox kinetics. For ITO and Au substrates, AuNC drop-casting decreases system dimensionality rather than increasing the EASA, where Au-Au self-diffusion was also observed. Interactions of the gold, ITO, and GC surfaces with themselves and with surfactant CTAB and ferrocyanide molecules were investigated using density functional theory.

Green Route Synthesis and Characterization Techniques of Silver Nanoparticles and Their Biological Adeptness

The development of the most reliable and green techniques for nanoparticle synthesis is an emerging step in the area of green nanotechnology. Many conventional approaches used for nanoparticle (NP) synthesis are expensive, deadly, and nonenvironmental. In this new era of nanotechnology, to overcome such concerns, natural sources which work as capping and reducing agents, including bacteria, fungi, biopolymers, and plants, are suitable candidates for synthesizing AgNPs. The surface morphology and applications of AgNPs are significantly pretentious to the experimental conditions by which they are synthesized. Available scattered information on the synthesis of AgNPs comprises the influence of altered constraints and characterization methods such as FTIR, UV-vis, DLS, SEM, TEM, XRD, EDX, etc. and their properties and applications. This review focuses on all the above-mentioned natural sources that have been used for AgNP synthesis recently. The green routes to synthesize AgNPs have established effective applications in various areas, including biosensors, magnetic resonance imaging (MRI), cancer treatment, surface-enhanced Raman spectroscopy (SERS), antimicrobial agents, drug delivery, gene therapy, DNA analysis, etc. The existing boundaries and prospects for metal nanoparticle synthesis by the green route are also discussed herein.

Nanocube Epitaxy for the Realization of Printable Monocrystalline Nanophotonic Surfaces

Plasmonic nanoparticles of the highest quality can be obtained via colloidal synthesis at low-cost. Despite the strong potential for integration in nanophotonic devices, the geometry of colloidal plasmonic nanoparticles is mostly limited to that of platonic solids. This is in stark contrast to nanostructures obtained by top-down methods that offer unlimited capability for plasmon resonance engineering, but present poor material quality and have doubtful perspectives for scalability. Here, an approach that combines the best of the two worlds by transforming assemblies of single-crystal gold nanocube building blocks into continuous monocrystalline plasmonic nanostructures with an arbitrary shape, via epitaxy in solution at near ambient temperature, is introduced. Nanocube dimers are used as a nanoreactor model system to investigate the mechanism in operando, revealing competitive redox processes of oxidative etching at the nanocube corners and simultaneous heterogeneous nucleation at their surface, that ensure filling of the sub-nanometer gap in a self-limited manner. Applying this procedure to nanocube arrays assembled in a patterned poly(dimethylsiloxane) (PDMS) substrate, it is able to obtain printable monocrystalline nanoantenna arrays that can be swiftly integrated in devices. This may lead to the implementation of low-cost nanophotonic surfaces of the highest quality in industrial products.

Recent advances in hydrothermal synthesis of facet-controlled CeO2-based nanomaterials

CeO₂-based nanomaterials have received tremendous attention due to their variety of applications. This paper is focused on the recent advances in facet-controlled CeO₂-based nanomaterials by the hydrothermal method. CeO₂-based nanomaterials with controllable size and exposed facets can be prepared by adjusting the reaction parameters. Moreover, doping and loading metals can improve the oxygen storage capacity (OSC) of CeO₂ and its catalytic activity. Various research studies on catalytic applications such as CO oxidation, water-gas shift reaction (WGSR), decomposition of hydrocarbons, and photocatalytic reaction have been carried out to exhibit the high potential of facet-controlled CeO₂ nanomaterials. This review will provide readers with various ideas for facet-controlled CeO₂-based nanomaterials.

Role of Anions in the Synthesis and Crystal Growth of Selected Semiconductors

The ideal methods for the preparation of semiconductors should be reproducible and possess the ability to control the morphology of the particles with monodispersity yields. Apart from that, it is also crucial to synthesize a large quantity of desired materials with good control of size, shape, morphology, crystallinity, composition, and surface chemistry at a reasonably low production cost. Metal oxides and chalcogenides with various morphologies and crystal structures have been obtained using different anion metal precursors (and/or different sulfur sources for chalcogenides in particular) through typical synthesis methods. Generally, spherical particles are obtained as it is thermodynamically favorable. However, by changing the anion precursor salts, the morphology of a semiconductor is influenced. Therefore, precursors having different anions show some effects on the final forms of a semiconductor. This review compiled and discussed the effects of anions (NO₃⁻, Cl⁻, SO₄^2-, CH₃COO⁻, CH(CH₃)O⁻, etc.) and different sources of S^2- on the morphology and crystal structure of selected metal oxides and chalcogenides respectively.

High-throughput synthesis of CeO2 nanoparticles for transparent nanocomposites repelling Pseudomonas aeruginosa biofilms

Preventing bacteria from adhering to material surfaces is an important technical problem and a major cause of infection. One of nature's defense strategies against bacterial colonization is based on the biohalogenation of signal substances that interfere with bacterial communication. Biohalogenation is catalyzed by haloperoxidases, a class of metal-dependent enzymes whose activity can be mimicked by ceria nanoparticles. Transparent CeO2/polycarbonate surfaces that prevent adhesion, proliferation, and spread of Pseudomonas aeruginosa PA14 were manufactured. Large amounts of monodisperse CeO2 nanoparticles were synthesized in segmented flow using a high-throughput microfluidic benchtop system using water/benzyl alcohol mixtures and oleylamine as capping agent. This reduced the reaction time for nanoceria by more than one order of magnitude compared to conventional batch methods. Ceria nanoparticles prepared by segmented flow showed high catalytic activity in halogenation reactions, which makes them highly efficient functional mimics of haloperoxidase enzymes. Haloperoxidases are used in nature by macroalgae to prevent formation of biofilms via halogenation of signaling compounds that interfere with bacterial cell-cell communication ("quorum sensing"). CeO2/polycarbonate nanocomposites were prepared by dip-coating plasma-treated polycarbonate panels in CeO2 dispersions. These showed a reduction in bacterial biofilm formation of up to 85% using P. aeruginosa PA14 as model organism. Besides biofilm formation, also the production of the virulence factor pyocyanin in is under control of the entire quorum sensing systems P. aeruginosa. CeO2/PC showed a decrease of up to 55% in pyocyanin production, whereas no effect on bacterial growth in liquid culture was observed. This indicates that CeO2 nanoparticles affect quorum sensing and inhibit biofilm formation in a non-biocidal manner.

A Label-Free Colorimetric Assay Based on Gold Nanoparticles for the Detection of H2O2 and Glucose

The significance of sensing hydrogen peroxide (H2O2) is due to its ubiquity, being a potential biomarker as well as an end-product of several oxidation reactions. Herein, based on gold nanoparticles (AuNPs) and coupled with single-stranded DNA (ssDNA) and ceria nanoparticles (CeO2), we developed a novel colorimetric method to detect H2O2 and glucose in NaCl solutions. In the presence of H2O2, ssDNA adsorbed on the surface of CeO2 could be released and subsequently decorated AuNPs, resulting in a distinct color change of the aqueous solution from purple to red, which could be observed by the naked eye. Since H2O2 can be produced in the process of glucose oxidation by glucose oxidase (GOx), this approach can also be employed to detect glucose. By employing this sensing system, the detection limits for H2O2 and glucose are about 0.21 μM and 3.01 µM, respectively. Additionally, monitoring the content of glucose in blood serum samples was successfully achieved by the proposed strategy. This work opens a potential avenue for the quantitative detection of H2O2 and glucose in clinical diagnostics.

Morphology effect of ceria supports on gold nanocluster catalyzed CO oxidation

The interfacial perimeter is generally viewed as the catalytically active site for a number of chemical reactions over oxide-supported nanogold catalysts. Here, well-defined CeO₂ nanocubes, nanorods and nanopolyhedra are chosen to accommodate atomically precise clusters (e.g. Au₂₅(PET)₁₈) to give different Au cluster-CeO₂ interfaces. TEM images show that Au particles of ∼1.3 nm are uniformly anchored on the ceria surface after annealing in air at 120 °C, which can rule out the size hierarchy of nanogold in CO oxidation studies. The gold nanoclusters are only immobilized on the CeO₂(200) facet in Au₂₅/CeO₂-C, while they are selectively loaded on CeO₂(002) and (111) in the Au₂₅/CeO₂-R and Au₂₅/CeO₂-P catalysts. X-ray photoelectron spectroscopy (XPS) and in situ infrared CO adsorption experiments clearly demonstrate that the gold species in the Au₂₅/CeO₂ samples are similar and partially charged (Au ^δ+, where 0 < δ < 1). It is observed that the catalytic activity decreases in the order of Au/CeO₂-R ≈ Au/CeO₂-P > Au/CeO₄-C in the CO oxidation. And the apparent activation energy over Au₂₅/CeO₂-C (60.5 kJ mol^-1) is calculated to be about two-fold of that over the Au₂₅/CeO₂-R (28.6 kJ mol^-1) and Au₂₅/CeO₂-P (31.3 kJ mol^-1) catalysts. It is mainly tailored by the adsorbed [O] species on the ceria surface, namely, Au₂₅/CeO₂(002) and Au₂₅/CeO₂(111) which were more active than the Au₂₅/CeO₂(200) system in the CO oxidation. These insights at the molecular level may provide guidelines for the design of new oxide-supported nanogold catalysts for aerobic oxidations.

Radiation Chemistry Provides Nanoscopic Insights into the Role of Intermediate Phases in CeO2 Mesocrystal Formation

The role of intermediate phases in CeO₂ mesocrystal formation from aqueous Ce^III solutions subjected to γ‐radiation was studied. Radiolytically formed hydroxyl radicals convert soluble Ce^III into less soluble Ce^IV. Transmission electron microscopy (TEM) and X‐ray diffraction studies of samples from different stages of the process allowed the identification of several stages in CeO₂ mesocrystal evolution following the oxidation to Ce^IV: (1) formation of hydrated Ce^IV hydroxides, serving as intermediates in the liquid‐to‐solid phase transformation; (2) CeO₂ primary particle growth inside the intermediate phase; (3) alignment of the primary particles into “pre‐mesocrystals” and subsequently to mesocrystals, guided by confinement of the amorphous intermediate phase and accompanied by the formation of “mineral bridges”. Further alignment of the obtained mesocrystals into supracrystals occurs upon slow drying, making it possible to form complex hierarchical architectures.

Growth of CeO2 nanocubes showing size-dependent optical and oxygen evolution reaction behaviors

CeO₂ nanocubes with average sizes of 9, 13, and 18 nm have been synthesized by preparing a slightly basic aqueous mixture of Ce(NO₃)₃, Na₂SO₄, and NH₄OH and heating the solution to 100 to 150 °C in 4 or 9 h. The nanocubes possess high crystalline quality. Their band gaps decrease gradually beyond the quantum confinement regime from 3.57 eV to 3.45 eV with increasing particle sizes. The 9 nm CeO₂ nanocubes have the most positive valence band energy and correspondingly they exhibit the best electrochemical oxygen evolution reaction activity. Since band gaps of semiconductor nanocrystals can be tuned substantially through particle size control to yield different band energies, this fact can be utilized to enhance the electrochemical and photocatalytic properties.

Kinetics studies on free radical scavenging property of ceria in polysulfone–ceria radiation resistant mixed-matrix membrane

Cerium oxide (ceria) contains two stable states of cerium ions (Ce3+ and Ce4+). The presence of these two states and the ability to swap from one state to another (Ce3+ ↔ Ce4+) by scavenging the highly reactive oxygen species (ROS) generated from radiolysis of water, ensure the enhanced stability of polysulfone (Psf) membranes in the γ-radiation environment. In this study, the ROS scavenging ability of ceria was studied. Ceria nanoparticles were found to scavenge ROS like hydroxyl radicals and hydrogen peroxide (H2O2). The H2O2 scavenging is due to the peroxidase-like catalytic activity of ceria nanoparticles. The ROS scavenging is responsible for offering protection to the Psf host matrix and in turn the stability to the Psf-ceria mixed-matrix membranes (MMMs) in γ-radiation environment. Thus, presence of ceria nanoparticles provides an opportunity for utilizing Psf-ceria MMMs in ionizing radiation environment with increased life span, without compromise in the performance.

Cubes to Cubes: Organization of MgO Particles into One-Dimensional and Two-Dimensional Nanostructures

Developing simple, inexpensive, and environmentally benign approaches to integrate morphologically well-defined nanoscale building blocks into larger high surface area materials is a key challenge in materials design and processing. In this work, we investigate the fundamental surface phenomena between MgO and water (both adsorption and desorption) with particles prepared via a vapor-phase process (MgO nanocubes) and a modified aerogel process (MgO(111) nanosheets). Through these studies, we unravel a strategy to assemble individual MgO nanoparticles into extended faceted single-crystalline MgO nanosheets and nanorods with well-defined exposed surfaces and edges. This reorganization can be triggered by the presence of H2O vapor or bulk liquid water. Water adsorption and the progressive conversion of vapor-phase grown oxide particles into hydroxides give rise to either one-dimensional or two-dimensional (1D or 2D) structures of high dispersion and surface area. The resulting Mg(OH)2 lamella with a predominant (001) surface termination are well-suited precursor structures for their topotactic conversion into laterally extended and uniform MgO(111) grain surface configurations. To understand the potential of polar (111) surfaces for faceting and surface reconstruction effects associated with water desorption, we investigated the stability of MgO(111) nanosheets during vacuum annealing and electron beam exposure. The significant surface reconstruction of the MgO(111) surfaces observed shows that adsorbate-free (111)-terminated surfaces of unsupported MgO nanostructures reconstruct rather than remain as charged planes of either three-fold coordinated O2- ion or Mg2+ ions. Thus, here we demonstrate the role water can play in surface formation and reconstruction by bridging wet chemical and surface science inspired approaches.

Morphology-dependent fluorescence of europium-doped cerium oxide nanomaterials

Europium-doped CeO2 nanomaterials have been investigated for a variety of sensing and biological applications, as doping enhances the catalytic activity of CeO2 and contributes visible fluorescence to the nanomaterial. However, scant evidence is available that directly compares Eu3+ fluorescence from multiple morphologies establishing useful correlation(s) between physical and optical trends in such structures. To address this shortcoming, Eu3+-doped CeO2 nanorods, nanowires, nanocubes, and annealed nanorods were synthesized and characterized, representing a range of crystalline defect sizes, defect concentrations, and surface moieties. Morphologies rich with oxygen defects and hydroxyl groups (assessed via X-ray photoelectron spectroscopy) quenched the Eu3+ fluorescence, while samples with larger crystalline domains and lower Ce3+ concentrations have relatively stronger emission intensities. Of the four morphologies, nanocubes exhibit the strongest emission, as each structure is monocrystalline with few oxygen defects and associated quenching sites. Furthermore, the Eu3+ hypersensitive transition is more responsive to the dopant concentration in the nanocubes, as defects induced by the dopant are not removed by thermal annealing.

Evaluation of size, shape, and charge effect on the biological interaction and cellular uptake of cerium oxide nanostructures

Cerium oxide (CeO₂) at the nanoscale has prolifically attracted the immense interest of researchers due to its switchable oxidation states (Ce³⁺/Ce⁴⁺) that play a crucial role in many biological activities. The present work reports the evaluation of size, shape, and charge effect on the biological interaction with RAW 264.7 cells for three nanostructures of CeO₂(CeO₂NS) namely nanocubes (NCs), nanorods (NRs), and nanoparticles (NPs). These NS exhibits similar composition and have average diameter values in the order of NCs < NRs ≅ NPs. The values of zeta potential revealed the anionic nature of NS with surface charge in order of NCs < NPs < NRs. The cellular interaction of CeO₂NS was analyzed for cytotoxicity, cellular uptake, and morphological studies. Quantitative determination of the uptake of CeO₂NS exhibited concentration-dependent uptake in the order as NCs > NPs > NRs. The proposed possible mechanisms of cellular uptake revealed that different structures tended to use the various endocytosis pathways in different proportions.

Deactivation-free ethanol steam reforming at nickel-tipped carbon filaments

Ni based catalysts have been widely studied for H2 production due to the ability of Ni to break C-C and C-H bonds. In this work, we study inverse catalysts prepared by well-controlled sub-monolayer deposition of CeO2 nanocubes onto Ni thin films for ethanol steam reforming (ESR). Results show that controlling the coverage of CeO2 nanocubes on Ni enhances H2 production by more than an order of magnitude compared to pure Ni. Contrary to the idea that C deposits must be continuously oxidized for sustained H2 production, the surface of the most active catalysts show significant C deposition, yet no deactivation is observed. HAADF-STEM analysis reveals the formation of carbon filaments (CFILs), which propel Ni particles upward at the filament tips via a catalytic tip growth mechanism, resulting in a Ni@CFIL active phase for ESR. Near-ambient pressure XPS indicates that the Ni@CFIL active phase forms as a result of C gradients at the interface between regions of pure Ni metal and domains of closely packed CeO2 nanocubes. These results show that the mesoscale morphology of deposited CeO2 nanocubes is responsible for templating the formation of a Ni@CFIL catalyst, which resists deactivation leading to highly active and stable H2 production from ethanol.

How the Morphology of NiOx-Decorated CeO2 Nanostructures Affects Catalytic Properties in CO2 Methanation

Effects of morphology and exposed crystal planes of NiO_x-decorated CeO₂ (NiCeO₂) nanostructured catalysts on activity during CO₂ methanation were examined, using nanorod (NR), nanocube (NC), and nanooctahedron (NO) structures. The NiCeO₂ nanorods (NiCeO₂-NR) showed superior activity to NiCeO₂-NC and NiCeO₂-NO along with excellent selectivity for CH₄. This material also demonstrated exceptional durability, with no significant loss of catalytic activity or structural change after use. Comprehensive physicochemical characterization as well as density functional theory calculations determined that the high performance of the NiCeO₂-NR was closely related to the large quantity of surface oxygen vacancies and the high degree of reversibility associated with the Ce⁴⁺ ↔ Ce³⁺ redox cycle of the support. These effects originate from the enhanced reactivity of oxygen atoms on the (110) surfaces of the oxide compared with the (100) and (111) surfaces. This information is expected to assist in the rational design of practical catalysts for the activation of CO₂ molecules and other important transformations.

Chitosan-based nanocomposites: preparation and characterization for food packing industry

In the present work, Cerium (IV)-Zirconium (IV) oxide nanoparticles (CeO4ZrNPs) was successfully dispersed into Chitosan/15Gelatin nanocomposites with different quantities. The obtained chitosan-based nanocomposites represented remarkable improvements in structural, morphological, mechanical, and thermal properties. Roughness increased from 74 nm to 6.4 nm, Young’s Modulus enhanced from 1.36 GPa to 2.99 GPa. The influence of dispersed CeO4ZrNPs contents on the phase transition temperature (T g) and the non-isothermal degradation processes of chitosan-based nanocomposites were examined using Differential Scanning Galorimetry (DSC) with different heating rates. Kinetic parameters of the thermal degradation for chitosan-based nanocomposites were evaluated using Kissinger-Akahira-Sunose (KAS) and Kissenger (KIS) procedures. Chitosan-based nanocomposites showed an increase in the thermal degradation temperature with higher activation energies, indicating improved thermal stability. Thermal analysis demonstrated that chitosan-based nanocomposites became more ordered by increasing CeO4ZrNPs as inferred from the negative entropy increase. Moreover, the degradation of chitosan-based nanocomposites has been described as a non-spontaneous process. The resulting information is particularly important in applications in which there is a need to obtain chitosan nanocomposites with improved mechanical and thermal properties such as food packing industry.

Thermally stable surfactant-free ceria nanocubes in silica aerogel

Surfactant-mediated chemical routes allow one to synthesize highly engineered shape- and size-controlled nanocrystals. However, the occurrence of capping agents on the surface of the nanocrystals is undesirable for selected applications. Here, a novel approach to the production of shape-controlled nanocrystals which exhibit high thermal stability is demonstrated. Ceria nanocubes obtained by surfactant-mediated synthesis are embedded inside a highly porous silica aerogel and thermally treated to remove the capping agent. Powder X-ray Diffraction and Scanning Transmission Electron Microscopy show the homogeneous dispersion of the nanocubes within the aerogel matrix. Remarkably, both the size and the shape of the ceria nanocubes are retained not only throughout the aerogel syntheses but also upon thermal treatments up to 900 °C, while avoiding their agglomeration. The reactivity of ceria is measured by in situ High-Energy Resolution Fluorescence Detected - X-ray Absorption Near Edge Spectroscopy at the Ce L₃ edge, and shows the reversibility of redox cycles of ceria nanocubes when they are embedded in the aerogel. This demonstrates that the enhanced reactivity due to their prominent {100} crystal facets is preserved. In contrast, unsupported ceria nanocubes begin to agglomerate as soon as the capping agent decomposes, leading to a degradation of their reactivity already at 275 °C.

Palladium supported on mixed-metal-organic framework (Co-Mn-MOF-74) for efficient catalytic oxidation of CO

Successful monometallic and bimetallic metal-organic frameworks with different Co/Mn ratios have been synthesized under solvothermal conditions. The as-synthesized MOFs followed by deposition of Pd nanoparticles with 0.5 to 7 wt%. The XRD, BET, SEM, TEM, EDAX and FT-IR characterization results reveal that bimetallic MOFs and Pd nanoparticles were finely dispersed on the prepared MOFs surfaces. XRD results confirm the formation of the desire MOFs and show the high degree of dispersion of Pd nanoparticles. TEM images show that Pd nanoparticles are nano-sized with almost uniform shape. EDAX shows that Pd nanoparticles successfully loaded on Co0.5-Mn0.5-MOF-74 catalyst. CO oxidation as a model reaction was then used to assess the catalytic performance of the prepared catalysts. The catalytic activity results show enhancement in the catalytic activities of monometallic MOFs after introducing another metal in the same framework and show an excellent improvement in CO conversion after loading with Pd nanoparticles. Furthermore, the samples that contain Pd nanoparticles exhibits higher catalytic activities which raised with increasing the content of Pd nanoparticles.

Design strategies for ceria nanomaterials: untangling key mechanistic concepts

The morphologies of ceria nanocrystals play an essential role in determining their redox and catalytic performances in many applications, yet the effects of synthesis variables on the formation of ceria nanoparticles of different morphologies and their related growth mechanisms have not been systematised. The design of these morphologies is underpinned by a range of fundamental parameters, including crystallography, optical mineralogy, the stabilities of exposed crystallographic planes, CeO_2-x stoichiometry, phase equilibria, thermodynamics, defect equilibria, and the crystal growth mechanisms. These features are formalised and the key analytical methods used for analysing defects, particularly the critical oxygen vacancies, are surveyed, with the aim of providing a source of design parameters for the synthesis of nanocrystals, specifically CeO_2-x. However, the most important aspect in the design of CeO_2-x nanocrystals is an understanding of the roles of the main variables used for synthesis. While there is a substantial body of data on CeO_2-x morphologies fabricated using low cerium concentrations ([Ce]) under different experimental conditions, the present work fully maps the effects of the relevant variables on the resultant CeO_2-x morphologies in terms of the commonly used raw materials [Ce] (and [NO₃^-] in Ce(NO₃)₃·6H₂O) as feedstock, [NaOH] as precipitating agent, temperature, and time (as well as the complementary vapour pressure). Through the combination of consideration of the published literature and the generation of key experimental data to fill in the gaps, a complete mechanistic description of the development of the main CeO_2-x morphologies is illustrated. Further, the mechanisms of the conversion of nanochains into the two variants of nanorods, square and hexagonal, have been elucidated through crystallographic reasoning. Other key conclusions for the crystal growth process are the critical roles of (1) the formation of Ce(OH)₄ crystallite nanochains as the precursors of nanorods and (2) the disassembly of the nanorods into Ce(OH)₄ crystallites and NO₃^--assisted reassembly into nanocubes (and nanospheres) as an unrecognised intermediate stage of crystal growth.

MOF Induces 2D GO to Assemble into 3D Accordion-Like Composites for Tunable and Optimized Microwave Absorption Performance

Three-dimensional (3D) materials assembled by 2D layered lamella can provide abundant interfaces which are greatly advantageous for high-performance microwave absorbers. Herein, accordion-like CeO_{2- x} /reduced graphene oxide (CeO_{2- x} /RGO) hybrid materials can be successfully synthesized by a solvothermal and hydrothermal method, which are composed of laminated RGO sheets and confined CeO_{2- x} nanoparticles (NPs). The multilayer structure is attributed to the process of Ce-MOF dissolving into NPs, then the NPs combining with graphene oxide (GO) to induce the 2D GO assembled into 3D accordion-like composites. The 3D accordion-like CeO_{2- x} /RGO simultaneously utilizes the insulated CeO_{2- x} and highly conductive RGO to assemble into the laminated structure with moderate electromagnetic parameters. The 3D-laminated lightweight CeO_{2- x} /RGO composite exhibits excellent attenuation ability of an ultrabroad bandwidth (5.84 GHz) and a maximum reflection loss (-50.6 dB) which can be ascribed from the glorious impedance matching, synergistic effect between RGO sheets and the embedded CeO_{2- x} NPs. An off-axis electron holography is carried out to visualize the spatial electrical potential and charge distribution around the CeO_{2- x} /RGO heterojunction, which clarifies the dipole polarization and interfacial polarization. This work enlightens a simple strategy to fabricate an excellent 3D laminated RGO-based microwave absorber.

Nanocube Imprint Lithography

In recent years, imprint lithography has emerged as a promising patterning technique capable of high-speed and volume production. In this work, we report highly reproducible one-step printing of metal nanocubes. A dried film of monocrystalline silver cubes serves as the resist, and a soft polydimethylsiloxane stamp directly imprints the final pattern. The use of atomically smooth and sharp faceted nanocubes facilitates the printing of high-resolution and well-defined patterns with face-to-face alignment between adjacent cubes. It also permits digital control over the line width of patterns such as straight lines, curves, and complex junctions over an area of several square millimeters. Single-particle lattices as well as three-dimensional nanopatterns are also demonstrated with an aspect ratio up to 5 in the vertical direction. The high-fidelity nanocube patterning combined with the previously demonstrated epitaxial overgrowth can enable curved (single) crystals from solution at room temperature or highly efficient transparent conductors.

Cerium-zirconium mixed oxide nanostructures for diesel soot oxidation: synthesis and effect of structure

Nanostructured materials have been used in several branches of science and technology. Particulate matter is one of the major air pollution concerns. In this work, nanorods and nanoparticles of Ce_0.8Zr_0.2O₂ (CZ) mixed oxides were prepared by different routes, and the use of an organic template was evaluated in diesel soot oxidation. The catalysts were characterized by several techniques including structural analysis (XRD, TEM, N₂ adsorption–desorption) and activity (TPR/MS, TPO/MS). A fast TPR/MS method is proposed to calculate hydrogen consumption that can be correlated to the oxygen storage capacity (OSC). It was demonstrated that CZ-nanorods with twice the amount of template in the syntheses (CZ-NRs-2X) were very active for soot oxidation with T_50% at 351 °C, and CO₂ and H₂O were the only oxidation products from Printex®-U (Evonik). This catalyst, reported for the first time, was subjected to up to three cycles and it showed fair activity, proving that this morphology is one of the best mixed oxides of CZ for oxidation.

Nanorods and nanoparticles of Ce_0.8Zr_0.2O₂ (CZ) mixed oxides were prepared by different routes and showed good activity for diesel soot oxidation.

Engineered defects in cerium oxides: tuning chemical reactivity for biomedical, environmental, & energy applications

Nanocrystalline cerium oxide (nanoceria) is a rare earth oxide with a complex surface chemistry. This material has seen substantial investigation in recent years in both fundamental and applied studies due largely to more precise characterization of the unique surface structures, which mediate its pronounced redox activity. In particular, oxygen storage/buffering capacities have been thoroughly correlated with synthesis and processing condition effects on other material features such as surface (micro-) faceting, reconstruction, and (extent of) hydration. Key material features such as these modulate nanoceria redox performance by changing the crystal microenvironment. In this review, we present nanoengineering methods, which have produced increased nanoceria performance in biomedical, energy, and catalysis applications. The impact of combined/cooperative theoretical and experimental studies are highlighted throughout.

CeO2-x quantum dots with massive oxygen vacancies as efficient catalysts for the synthesis of dimethyl carbonate

CeO2-x quantum dots with massive oxygen vacancies are obtained by a one-step single molecular synthesis strategy. The yield of dimethyl carbonate from CO2 and methanol is more than 5 times that for commercial CeO2 nanoparticles.

Formation mechanism and size control of ceria nanocubes

Ceria nanocubes of 10–20 nm were hydrothermally synthesized, involving Ce(OH)₃ rods and small-sized CeO₂ polyhedra/cubes as building blocks.