Unusual non-bulk properties in nanoscale materials: thermal metal-metal bond contraction of gamma-alumina-supported Pt catalysts

The Role of In Situ/Operando IR Spectroscopy in Unraveling Adsorbate-Induced Structural Changes in Heterogeneous Catalysis

Heterogeneous catalysts undergo thermal- and/or adsorbate-induced dynamic changes under reaction conditions, which consequently modify their catalytic behavior. Hence, it is increasingly crucial to characterize the properties of a catalyst under reaction conditions through the so-called "operando" approach. Operando IR spectroscopy is probably one of the most ubiquitous and versatile characterization methods in the field of heterogeneous catalysis, but its potential in identifying adsorbate- and thermal-induced phenomena is often overlooked in favor of other less accessible methods, such as XAS spectroscopy and high-resolution microscopy. Without detracting from these techniques, and while aware of the enormous value of a multitechnique approach, the purpose of this Review is to show that IR spectroscopy alone can provide relevant information in this field. This is done by discussing a few selected case studies from our own research experience, which belong to the categories of both "single-site"- and nanoparticle-based catalysts.

Accelerated discovery of multi-elemental reverse water-gas shift catalysts using extrapolative machine learning approach

Designing novel catalysts is key to solving many energy and environmental challenges. Despite the promise that data science approaches, including machine learning (ML), can accelerate the development of catalysts, truly novel catalysts have rarely been discovered through ML approaches because of one of its most common limitations and criticisms-the assumed inability to extrapolate and identify extraordinary materials. Herein, we demonstrate an extrapolative ML approach to develop new multi-elemental reverse water-gas shift catalysts. Using 45 catalysts as the initial data points and performing 44 cycles of the closed loop discovery system (ML prediction + experiment), we experimentally tested a total of 300 catalysts and identified more than 100 catalysts with superior activity compared to those of the previously reported high-performance catalysts. The composition of the optimal catalyst discovered was Pt(3)/Rb(1)-Ba(1)-Mo(0.6)-Nb(0.2)/TiO2. Notably, niobium (Nb) was not included in the original dataset, and the catalyst composition identified was not predictable even by human experts.

Surface Redox Dynamics in Gold-Zinc CO2 Hydrogenation Catalysts

Au-Zn catalysts have previously been shown to promote the hydrogenation of CO₂ to methanol, but their active state is poorly understood. Here, silica-supported bimetallic Au-Zn alloys, prepared by surface organometallic chemistry (SOMC), are shown to be proficient catalysts for hydrogenation of CO₂ to methanol. In situ X-ray absorption spectroscopy (XAS), in conjunction with gas-switching experiments, is used to amplify subtle changes occurring at the surface of this tailored catalyst during reaction. Consequently, an Au-Zn alloy is identified and is shown to undergo subsequent reversible redox changes under reaction conditions according to multivariate curve resolution alternating least-squares (MCR-ALS) analysis. These results highlight the role of alloying and dealloying in Au-based CO₂ hydrogenation catalysts and illustrate the role of these reversible processes in driving reactivity.

Gas phase vs. liquid phase: monitoring H2 and CO adsorption phenomena on Pt/Al2O3 by IR spectroscopy

The adsorption of H2 and CO over Pt/Al2O3 was studied in gas and in liquid phase by FT-IR and ATR-IR spectroscopies under otherwise similar conditions. The solvent competes with hydrogen and CO for terrace and kink metal sites.

Active Site Fluxional Restructuring as a New Paradigm in Triggering Reaction Activity for Nanocluster Catalysis

The rationale of the catalytic activity observed in experiments is a crucial task in fundamental catalysis studies. Efficient catalyst design relies on an accurate understanding of the origin of the activity at the atomic level. Theoretical studies have been widely developed to reach such a fundamental atomic scale understanding of catalytic activity. Current theories ascribe the catalytic activity to the geometric and electronic structure of the active site, in which the geometrical and electronic structure effects are derived from the equilibrium geometry of active sites characterizing the static property of the catalyst; however catalysts, especially in the form of nanoclusters, may present fluxional and dynamic structure under reaction conditions, and the effect of this fluxional behavior is not yet widely recognized. Therefore, this Account will focus on the fluxionality of the active sites, which is driven by thermal fluctuations under finite temperature.Under reaction conditions, nanocluster catalysts can readily restructure, either being promoted to another metastable isomer (named as plastic fluxionality) or presenting ample deformations around their equilibrium geometry (named as elastic fluxionality). This Account summarizes our recent studies on the fluxionality of the nanoclusters and how plastic and elastic fluxionalities play roles in highly efficient reaction pathways. Our results show that the low energy metastable isomers formed by plastic fluxionality can manifest high reactivity despite their minor occurrence probability in the mixture of catalyst isomers. In the end, the highly active metastable isomer may dominate the total observed reactivity. In addition, the isomerization between the global minimum structure and the highly active metastable isomer can be a central step in catalytic transformations in order to circumvent some difficult reaction steps and may govern the overall mechanism. In addition, the thermal fluctuation driven elastic fluxionality is also found to play a key role, complementary to plastic fluxionality. The elastic fluxionality creates substantial structural deformations of the active site, and these deformed geometries enable low activation energies and high catalytic activity, which cannot be found from the static equilibrium geometry of the catalyst. A dedicated global activity search algorithm is proposed to search for the optimal reaction pathway on fluxional nanoclusters. In summary, our studies demonstrate that thermal-driven fluxionality provides a different paradigm for understanding the high activity of nanoclusters under reaction conditions beyond the static description of geometric and electronic structure. We first summarize our previous results and then provide a perspective for further studies on how to investigate and take the advantage of the fluxional geometry of nanoclusters. We will defend in this Account that the static picture for the active site is not complete and might miss critical reaction pathways that are highly efficient and only open after thermally induced restructuring of the active site.

Tuning Ligand-Coordinated Single Metal Atoms on TiO2 and their Dynamic Response during Hydrogenation Catalysis

Ligand-coordinated supported catalysts (LCSCs) are of growing interest for heterogeneous single-atom catalysis. Here, the effect of the choice of organic ligand on the activity and stability of TiO₂ -supported single-atom Pt-ligand catalysts was investigated for ethylene hydrogenation. The activity of these catalysts showed a significant dependence on the choice of ligand and also correlated with coordination number for Pt-ligand and Pt-Cl^- . Of the three ligands examined in this study, the one with the lowest Pt coordination number, 1,10-phenanthroline-5,6-dione (PDO), showed the lowest reaction temperature and highest reaction rate, likely due to those metal sites being more accessible to reactant adsorption. In-situ X-ray absorption spectroscopy (XAS) experiments showed that the activity also correlated with good heterolytic dissociation of hydrogen, which was supported by OH/OD exchange experiments and was the rate-determining step of the hydrogenation reaction. In these in-situ XAS experiments up to 190 °C, the supported Pt-ligand catalyst showed excellent stability against structural and chemical change. Instead of Pt, the PDO ligand could be coordinated with Ir on TiO₂ to form Ir LCSCs that showed slow activation by loss of Ir-Cl bonds, then excellent stability in the hydrogenation of ethylene. These results provide the chance to engineer ligand-coordinated supported catalysts at the single-atom catalyst level by the choice of ligand and enable new applications at relatively high temperature.

Spherical core-shell alumina support particles for model platinum catalysts

γ- and δ-alumina are popular catalyst support materials. Using a hydrothermal synthesis method starting from aluminum nitrate and urea in diluted solution, spherical core-shell particles with a uniform particle size of about 1 μm were synthesized. Upon calcination at 1000 °C, the particles adopted a core-shell structure with a γ-alumina core and δ-alumina shell as evidenced by 2D and 3D electron microscopy and 27Al magic angle spinning nuclear magnetic resonance spectroscopy. The spherical alumina particles were loaded with Pt nanoparticles with an average size below 1 nm using the strong electrostatic adsorption method. Electron microscopy and energy dispersive X-ray spectroscopy revealed a homogeneous platinum dispersion over the alumina surface. These platinum loaded alumina spheres were used as a model catalyst for bifunctional catalysis. Physical mixtures of Pt/alumina spheres and spherical zeolite particles are equivalent to catalysts with platinum deposited on the zeolite itself facilitating the investigation of the catalyst components individually. The spherical alumina particles are very convenient supports for obtaining a homogeneous distribution of highly dispersed platinum nanoparticles. Obtaining such a small Pt particle size is challenging on other support materials such as zeolites. The here reported and well-characterized Pt/alumina spheres can be combined with any zeolite and used as a bifunctional model catalyst. This is an interesting strategy for the examination of the acid catalytic function without the interference of the supported platinum metal on the investigated acid material.

In Situ/Operando Electrocatalyst Characterization by X-ray Absorption Spectroscopy

During the last decades, X-ray absorption spectroscopy (XAS) has become an indispensable method for probing the structure and composition of heterogeneous catalysts, revealing the nature of the active sites and establishing links between structural motifs in a catalyst, local electronic structure, and catalytic properties. Here we discuss the fundamental principles of the XAS method and describe the progress in the instrumentation and data analysis approaches undertaken for deciphering X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra. Recent usages of XAS in the field of heterogeneous catalysis, with emphasis on examples concerning electrocatalysis, will be presented. The latter is a rapidly developing field with immense industrial applications but also unique challenges in terms of the experimental characterization restrictions and advanced modeling approaches required. This review will highlight the new insight that can be gained with XAS on complex real-world electrocatalysts including their working mechanisms and the dynamic processes taking place in the course of a chemical reaction. More specifically, we will discuss applications of in situ and operando XAS to probe the catalyst's interactions with the environment (support, electrolyte, ligands, adsorbates, reaction products, and intermediates) and its structural, chemical, and electronic transformations as it adapts to the reaction conditions.

γ-Alumina-supported Pt17 cluster: controlled loading, geometrical structure, and size-specific catalytic activity for carbon monoxide and propylene oxidation

Although Pt is extensively used as a catalyst to purify automotive exhaust gas, it is desirable to reduce Pt consumption through size reduction because Pt is a rare element and an expensive noble metal. In this study, we successfully loaded a Pt17 cluster on γ-alumina (γ-Al2O3) (Pt17/γ-Al2O3) using [Pt17(CO)12(PPh3)8]Cl n (n = 1, 2) as a precursor. In addition, we demonstrated that Pt is not present in the form of an oxide in Pt17/γ-Al2O3 but instead has a framework structure as a metal cluster. Moreover, we revealed that Pt17/γ-Al2O3 exhibits higher catalytic activity for carbon monoxide and propylene oxidation than γ-Al2O3-supported larger Pt nanoparticles (PtNP/γ-Al2O3) prepared using the conventional impregnation method. Recently, our group discovered a simple method for synthesizing the precursor [Pt17(CO)12(PPh3)8]Cl n . Furthermore, Pt17 is a Pt cluster within the size range associated with high catalytic activity. By combining our established synthesis and loading methods, other groups can conduct further research on Pt17/γ-Al2O3 to explore its catalytic activities in greater depth.

Pt8 cluster on alumina under a pressure of hydrogen: Support-dependent reconstruction from first-principles global optimization

Alumina supported Pt nanoclusters under a hydrogen environment play a crucial role in many heterogeneous catalysis applications. We conducted grand canonical genetic algorithm simulations for supported Pt₈ clusters in a hydrogen gas environment to study the intracluster, cluster-support, and cluster-adsorbate interactions. Two alumina surfaces, α-Al₂O₃(0001) and γ-Al₂O₃(100), and two conditions, T = 600 °C, p_H2 = 0.1 bar and T = 25 °C, p_H2 = 1.0 bar, were considered corresponding to low and high hydrogen chemical potential μ_H, respectively. The low free energy ensemble of Pt₈ is decorated by a medium (2-12 H), respectively, high (20-30 H), number of hydrogen atoms under equilibrium at low μ_H, respectively, high μ_H, and undergoes different morphological transformations on the two surfaces. On α-Al₂O₃(0001), Pt₈ is mostly 3D but very fluxional in structure at low μ_H and converts to open one-layer 2D structures with minimal fluxionality at high μ_H, whereas on γ-Al₂O₃(100), the exact opposite occurs: Pt₈ clusters present one-layer 2D shapes at low μ_H and switch to compact 3D shapes under high μ_H, during which the Pt₈ cluster preserves moderate fluxionality. Further analysis reveals a similar Pt-Pt bond length increase when switching from low μ_H to high μ_H on both surfaces although morphological transformations are different. Electronic structure analysis shows the existence of bonding interactions between Pt and Lewis acidic Al³⁺ sites along with the Pt-O interaction, which implies the necessity to include Al neighbors to discuss the electronic structure of small Pt clusters.

Investigation of Thermal Stability and Reactivity of Rh Nanoclusters on an Ultrathin Alumina Film

We studied the structural and morphological evolution of Rh clusters on an ordered ultrathin alumina film grown on NiAl(100) in annealing processes, under ultrahigh vacuum conditions and with various surface probe techniques. The Rh clusters, prepared on vapor deposition of Rh onto the alumina film at 300 K, had an fcc phase and grew in the (100) orientation; the annealing altered the cluster structure little—the lattice parameter decreased by a factor <2%—but the cluster morphology significantly. With elevated temperature, small clusters (diameter ≤1.5 nm) decreased little in size; in contrast, large clusters (diameter ≥2.0 nm) varied in a complex manner—their mean diameter decreased to about 1.5 nm on annealing to 450 K, despite their similar height, while it increased to above 2.0 nm at temperature ≥570 K. This atypical decrease in size was governed predominantly by energetics. Such a reduced size enhanced the total surface area as well as the reactivity of the clusters toward methanol decomposition, so increased the production of D2 (H2) and CO from decomposed methanol-d4 (or methanol). The result implies a higher temperature tolerance for Rh clusters on the alumina film and a practical approach to prepare small Rh clusters with high reactivity.

Selective Transformations of Triglycerides into Fatty Amines, Amides, and Nitriles by using Heterogeneous Catalysis

The use of triglycerides as an important class of biomass is an effective strategy to realize a more sustainable society. Herein, three heterogeneous catalytic methods are reported for the selective one-pot transformation of triglycerides into value-added chemicals: i) the reductive amination of triglycerides into fatty amines with aqueous NH₃ under H₂ promoted by ZrO₂ -supported Pt clusters; ii) the amidation of triglycerides under gaseous NH₃ catalyzed by high-silica H-beta (Hβ) zeolite at 180 °C; iii) the Hβ-promoted synthesis of nitriles from triglycerides and gaseous NH₃ at 220 °C. These methods are widely applicable to the transformation of various triglycerides (C₄ -C₁₈ skeletons) into the corresponding amines, amides, and nitriles.

Solving the Structure and Dynamics of Metal Nanoparticles by Combining X-Ray Absorption Fine Structure Spectroscopy and Atomistic Structure Simulations

Extended X-ray absorption fine structure (EXAFS) spectroscopy is a premiere method for analysis of the structure and structural transformation of nanoparticles. Extraction of analytical information about the three-dimensional structure and dynamics of metal-metal bonds from EXAFS spectra requires special care due to their markedly non-bulk-like character. In recent decades, significant progress has been made in the first-principles modeling of structure and properties of nanoparticles. In this review, we summarize new approaches for EXAFS data analysis that incorporate particle structure modeling into the process of structural refinement.

Taming the stability of Pd active phases through a compartmentalizing strategy toward nanostructured catalyst supports

The design and synthesis of robust sintering-resistant nanocatalysts for high-temperature oxidation reactions is ubiquitous in many industrial catalytic processes and still a big challenge in implementing nanostructured metal catalyst systems. Herein, we demonstrate a strategy for designing robust nanocatalysts through a sintering-resistant support via compartmentalization. Ultrafine palladium active phases can be highly dispersed and thermally stabilized by nanosheet-assembled γ-Al₂O₃ (NA-Al₂O₃) architectures. The NA-Al₂O₃ architectures with unique flowerlike morphologies not only efficiently suppress the lamellar aggregation and irreversible phase transformation of γ-Al₂O₃ nanosheets at elevated temperatures to avoid the sintering and encapsulation of metal phases, but also exhibit significant structural advantages for heterogeneous reactions, such as fast mass transport and easy access to active sites. This is a facile stabilization strategy that can be further extended to improve the thermal stability of other Al₂O₃-supported nanocatalysts for industrial catalytic applications, in particular for those involving high-temperature reactions.

The design and synthesis of robust sintering-resistant nanocatalysts for high-temperature oxidation reactions remains challenging, even though the strategy of metal-support interactions has been extensively used. Here, the authors demonstrate an alternative strategy for designing robust nanocatalysts through a sintering-resistant support.

Metal Catalysts for Heterogeneous Catalysis: From Single Atoms to Nanoclusters and Nanoparticles

Metal species with different size (single atoms, nanoclusters, and nanoparticles) show different catalytic behavior for various heterogeneous catalytic reactions. It has been shown in the literature that many factors including the particle size, shape, chemical composition, metal-support interaction, and metal-reactant/solvent interaction can have significant influences on the catalytic properties of metal catalysts. The recent developments of well-controlled synthesis methodologies and advanced characterization tools allow one to correlate the relationships at the molecular level. In this Review, the electronic and geometric structures of single atoms, nanoclusters, and nanoparticles will be discussed. Furthermore, we will summarize the catalytic applications of single atoms, nanoclusters, and nanoparticles for different types of reactions, including CO oxidation, selective oxidation, selective hydrogenation, organic reactions, electrocatalytic, and photocatalytic reactions. We will compare the results obtained from different systems and try to give a picture on how different types of metal species work in different reactions and give perspectives on the future directions toward better understanding of the catalytic behavior of different metal entities (single atoms, nanoclusters, and nanoparticles) in a unifying manner.

Selective hydrogenation of unsaturated aldehydes over Pt nanoparticles promoted by the cooperation of steric and electronic effects

The selective hydrogenation of α,β-unsaturated aldehydes to unsaturated alcohols can reach high selectivity and activity at room temperature using Pt nanoparticles immobilized on a non-porous Al₂O₃ support stabilized by aspartic acid.

Looking for the active hydrogen species in a 5 wt% Pt/C catalyst: a challenge for inelastic neutron scattering

We looked at the active hydrogen species in a highly dispersed and very homogeneous 5 wt% Pt/C industrial catalyst (Pt particle mean diameter of 2.0 ± 0.5 nm) for hydrogenation reactions, by coupling H₂ adsorption measurements with Inelastic Neutron Scattering (INS).

An in situ XAS study of the activation of precursor-dependent Pd nanoparticles

The activation of precursor-dependent Pd nanoparticles was comprehensively followed by in situ X-ray absorption spectroscopy on two inorganic supports for rationalizing the final catalytic activity.

Anomalous Structural Disorder in Supported Pt Nanoparticles

Supported Pt nanocatalysts generally exhibit anomalous behavior, including negative thermal expansion and large structural disorder. Finite temperature DFT/MD simulations reproduce these properties, showing that they are largely explained by a combination of thermal vibrations and low-frequency disorder. We show here that a full interpretation is more complex and that the DFT/MD mean-square relative displacements (MSRD) can be further separated into vibrational disorder, "dynamic structural disorder" (DSD), and long-time equilibrium fluctuations of the structure dubbed "anomalous structural disorder" (ASD). We find that the vibrational and DSD components behave normally, increasing linearly with temperature while the ASD decreases, reflecting the evolution of mean nanoparticle geometry. As a consequence the usual procedure of fitting the MSRD to normal vibrations plus temperature-independent static disorder results in unphysical bond strengths and Grüneisen parameters.

Peptide-Directed PdAu Nanoscale Surface Segregation: Toward Controlled Bimetallic Architecture for Catalytic Materials

Bimetallic nanoparticles are of immense scientific and technological interest given the synergistic properties observed when two different metallic species are mixed at the nanoscale. This is particularly prevalent in catalysis, where bimetallic nanoparticles often exhibit improved catalytic activity and durability over their monometallic counterparts. Yet despite intense research efforts, little is understood regarding how to optimize bimetallic surface composition and structure synthetically using rational design principles. Recently, it has been demonstrated that peptide-enabled routes for nanoparticle synthesis result in materials with sequence-dependent catalytic properties, providing an opportunity for rational design through sequence manipulation. In this study, bimetallic PdAu nanoparticles are synthesized with a small set of peptides containing known Pd and Au binding motifs. The resulting nanoparticles were extensively characterized using high-resolution scanning transmission electron microscopy, X-ray absorption spectroscopy, and high-energy X-ray diffraction coupled to atomic pair distribution function analysis. Structural information obtained from synchrotron radiation methods was then used to generate model nanoparticle configurations using reverse Monte Carlo simulations, which illustrate sequence dependence in both surface structure and surface composition. Replica exchange with solute tempering molecular dynamics simulations were also used to predict the modes of peptide binding on monometallic surfaces, indicating that different sequences bind to the metal interfaces via different mechanisms. As a testbed reaction, electrocatalytic methanol oxidation experiments were performed, wherein differences in catalytic activity are clearly observed in materials with identical bimetallic composition. Taken together, this study indicates that peptides could be used to arrive at bimetallic surfaces with enhanced catalytic properties, which could be leveraged for rational bimetallic nanoparticle design using peptide-enabled approaches.

Design of Highly Selective Platinum Nanoparticle Catalysts for the Aerobic Oxidation of KA-Oil using Continuous-Flow Chemistry

Highly active and selective aerobic oxidation of KA-oil to cyclohexanone (precursor for adipic acid and ɛ-caprolactam) has been achieved in high yields using continuous-flow chemistry by utilizing uncapped noble-metal (Au, Pt & Pd) nanoparticle catalysts. These are prepared using a one-step in situ methodology, within three-dimensional porous molecular architectures, to afford robust heterogeneous catalysts. Detailed spectroscopic characterization of the nature of the active sites at the molecular level, coupled with aberration-corrected scanning transmission electron microscopy, reveals that the synthetic methodology and associated activation procedures play a vital role in regulating the morphology, shape and size of the metal nanoparticles. These active centers have a profound influence on the activation of molecular oxygen for selective catalytic oxidations.

Hierarchy of bond stiffnesses within icosahedral-based gold clusters protected by thiolates

Unique thermal properties of metal clusters are believed to originate from the hierarchy of the bonding. However, an atomic-level understanding of how the bond stiffnesses are affected by the atomic packing of a metal cluster and the interfacial structure with the surrounding environment has not been attained to date. Here we elucidate the hierarchy in the bond stiffness in thiolate-protected, icosahedral-based gold clusters Au₂₅(SC₂H₄Ph)₁₈, Au₃₈(SC₂H₄Ph)₂₄ and Au₁₄₄(SC₂H₄Ph)₆₀ by analysing Au L₃-edge extended X-ray absorption fine structure data. The Au–Au bonds have different stiffnesses depending on their lengths. The long Au–Au bonds, which are more flexible than those in the bulk metal, are located at the icosahedral-based gold core surface. The short Au–Au bonds, which are stiffer than those in the bulk metal, are mainly distributed along the radial direction and form a cyclic structural backbone with the rigid Au–SR oligomers.

The hierarchy of bond stiffness may contribute to the thermal properties of metal clusters. Here, the authors use X-ray absorption spectroscopy to study the stiffness of the gold–gold and gold–sulfur bonds in a series of thiolate-protected, icosahedral-based gold clusters.

Porous Ru/RuOx/LDH as highly active heterogeneous catalysts for the aerobic oxidation of alcohols

Porous LDH supported Ru/RuO_x nanocatalysts exhibited much better catalytic activity and stability than conventional Ru-based catalysts for alcohol oxidation.

Surface Tension Effects on the Reactivity of Metal Nanoparticles

We present calculated adsorption energies of oxygen on gold and platinum clusters with up to 923 atoms (3 nm diameter) using density functional theory. We find that surface tension of the clusters induces a compression, which weakens the bonding of adsorbates compared with the bonding on extended surfaces. The effect is largest for close-packed surfaces and almost nonexistent on the more reactive steps and edges. The effect is largest at low coverage and decreases, even changing sign, at higher coverages where the strain changes from compressive to tensile. Quantum size effects also influence adsorption energies but only below a critical size of 1.5 nm for platinum and 2.5 nm for gold. We develop a model to describe the strain-induced size effects on adsorption energies, which is able to describe the influence of surface structure, adsorbate, metal, and coverage.

Exceptional activity of sub-nm Pt clusters on CdS for photocatalytic hydrogen production: a combined experimental and first-principles study

Here we report the first ever observation of outstanding photocatalytic hydrogen production activity of sub-nm Pt cluster modified CdS nanocatalysts.

In situ diffraction of highly dispersed supported platinum nanoparticles

In situ synchrotron diffraction in H₂ reveals structural and microstructural details of supported 1–2 nm Pt nanoparticles.

Pt-Au alloying at the nanoscale

The formation of nanosized alloys between a pair of elements, which are largely immiscible in bulk, is examined in the archetypical case of Pt and Au. Element specific resonant high-energy X-ray diffraction experiments coupled to atomic pair distribution functions analysis and computer simulations prove the formation of Pt-Au alloys in particles less than 10 nm in size. In the alloys, Au-Au and Pt-Pt bond lengths differing in 0.1 Å are present leading to extra structural distortions as compared to pure Pt and Au particles. The alloys are found to be stable over a wide range of Pt-Au compositions and temperatures contrary to what current theory predicts. The alloy-type structure of Pt-Au nanoparticles comes along with a high catalytic activity for electrooxidation of methanol making an excellent example of the synergistic effect of alloying at the nanoscale on functional properties.

In situ coarsening study of inverse micelle-prepared Pt nanoparticles supported on γ-Al2O3: pretreatment and environmental effects

The thermal stability of inverse micelle prepared Pt nanoparticles (NPs) supported on nanocrystalline γ-Al(2)O(3) was monitored in situ under different chemical environments (H(2), O(2), H(2)O) via extended X-ray absorption fine-structure spectroscopy (EXAFS) and ex situ via scanning transmission electron microscopy (STEM). Drastic differences in the stability of identically synthesized NP samples were observed upon exposure to two different pre-treatments. In particular, exposure to O(2) at 400 °C before high temperature annealing in H(2) (800 °C) was found to result in the stabilization of the inverse micelle prepared Pt NPs, reaching a maximum overall size after moderate coarsening of ∼1 nm. Interestingly, when an analogous sample was pre-treated in H(2) at ∼400 °C, a final size of ∼5 nm was reached at 800 °C. The beneficial role of oxygen in the stabilization of small Pt NPs was also observed in situ during annealing treatments in O(2) at 450 °C for several hours. In particular, while NPs of 0.5 ± 0.1 nm initial average size did not display any significant sintering (0.6 ± 0.2 nm final size), an analogous thermal treatment in hydrogen leads to NP coarsening (1.2 ± 0.3 nm). The same sample pre-dosed and annealed in an atmosphere containing water only displayed moderate sintering (0.8 ± 0.3 nm). Our data suggest that PtO(x) species, possibly modifying the NP/support interface, play a role in the stabilization of small Pt NPs. Our study reveals the enhanced thermal stability of inverse micelle prepared Pt NPs and the importance of the sample pre-treatment and annealing environment in the minimization of undesired sintering processes affecting the catalytic performance of nanosized particles.

Influence of adsorbates on the electronic structure, bond strain, and thermal properties of an alumina-supported Pt catalyst

We describe the results of an X-ray absorption spectroscopy (XAS) study of adsorbate and temperature-dependent alterations of the atomic level structure of a prototypical, noble metal hydrogenation and reforming catalyst: ∼1.0 nm Pt clusters supported on gamma alumina (Pt/γ-Al(2)O(3)). This work demonstrates that the metal-metal (M-M) bonding in these small clusters is responsive to the presence of adsorbates, exhibiting pronounced coverage-dependent strains in the clusters' M-M bonding, with concomitant modifications of their electronic structures. Hydrogen and CO adsorbates demonstrate coverage-dependent bonding that leads to relaxation of the M-M bond strains within the clusters. These influences are partially compensated, and variably mediated, by the temperature-dependent electronic perturbations that arise from cluster-support and adsorbate-support interactions. Taken together, the data reveal a strikingly fluxional system with implications for understanding the energetics of catalysis. We estimate that a 9.1 ± 1.1 kJ/mol strain exists for these clusters under H(2) and that this strain increases to 12.8 ± 1.7 kJ/mol under CO. This change in the energy of the particle is in addition to the different heats of adsorption for each gas (64 ± 3 and 126 ± 2 kJ/mol for H(2) and CO, respectively).