Dimerization of Alkynes Promoted by a Pincer-Ligated Iridium Complex. C−C Reductive Elimination Inhibited by Steric Crowding

Alkynyl Ligands as Building Blocks for the Preparation of Phosphorescent Iridium(III) Emitters: Alternative Synthetic Precursors and Procedures

Alkynyl ligands stabilize dimers [Ir(μ-X)(3b)₂]₂ with a cis disposition of the heterocycles of the 3b ligands, in contrast to chloride. Thus, the complexes of this class—cis-[Ir(μ₂-η²-C≡CPh){κ²-C,N-(C₆H₄-Isoqui)}₂]₂ (Isoqui = isoquinoline) and cis-[Ir(μ₂-η²-C≡CR){κ²-C,N-(MeC₆H₃-py)}₂]₂ (R = Ph, ^tBu)—have been prepared in high yields, starting from the dihydroxo-bridged dimers trans-[Ir(μ-OH){κ²-C,N-(C₆H₄-Isoqui)}₂]₂ and trans-[Ir(μ-OH){κ²-C,N-(MeC₆H₃-py)}₂]₂ and terminal alkynes. Subsequently, the acetylide ligands have been employed as building blocks to prepare the orange and green iridium(III) phosphorescent emitters, Ir{κ²-C,N-[C(CH₂Ph)Npy]}{κ²-C,N-(C₆H₄-Isoqui)}₂ and Ir{κ²-C,N-[C(CH₂R)Npy]}{κ²-C,N-(MeC₆H₃-py)}₂ (R = Ph, ^tBu), respectively, with an octahedral structure of fac carbon and nitrogen atoms. The green emitter Ir{κ²-C,N-[C(CH₂^tBu)Npy]}{κ²-C,N-(MeC₆H₃-py)}₂ reaches 100% of quantum yield in both the poly(methyl methacrylate) (PMMA) film and 2-MeTHF at room temperature. In organic light-emitting diode (OLED) devices, it demonstrates very saturated green emission at a peak wavelength of 500 nm, with an external quantum efficiency (EQE) of over 12% or luminous efficacy of 30.7 cd/A.

Acetylide ligands have been employed as building blocks to prepare orange and green iridium(III) phosphorescent emitters, with an octahedral structure of fac carbon and nitrogen atoms. In OLED devices, the emitter Ir{κ²-C,N-[C(CH₂^tBu)Npy]}{κ²-C,N-(MeC₆H₃-py)}₂ demonstrates very saturated green emission at a peak wavelength of 500 nm, with a luminous efficacy of 30.7 cd/A.

C-Cl Oxidative Addition and C-C Reductive Elimination Reactions in the Context of the Rhodium-Promoted Direct Arylation

A cycle of stoichiometric elemental reactions defining the direct arylation promoted by a redox-pair Rh(I)-Rh(III) is reported. Starting from the rhodium(I)-aryl complex RhPh{κ3-P,O,P-[xant(PiPr2)2]} (xant(PiPr2)2 = 9,9-dimethyl-4,5-bis(diisopropylphosphino)xanthene), the reactions include C-Cl oxidative addition of organic chlorides, halide abstraction from the resulting six-coordinate rhodium(III) derivatives, C-C reductive coupling between the initial aryl ligand and the added organic group, oxidative addition of a C-H bond of a new arene, and deprotonation of the generated hydride-rhodium(III)-aryl species to form a new rhodium(I)-aryl derivative. In this context, the kinetics of the oxidative additions of 2-chloropyridine, chlorobenzene, benzyl chloride, and dichloromethane to RhPh{κ3-P,O,P-[xant(PiPr2)2]} and the C-C reductive eliminations of biphenyl and benzylbenzene from [RhPh2{κ3-P,O,P-[xant(PiPr2)2]}]BF4 and [RhPh(CH2Ph){κ3-P,O,P-[xant(PiPr2)2]}]BF4, respectively, have been studied. The oxidative additions generally involve the cis addition of the C-Cl bond of the organic chloride to the rhodium(I) complex, being kinetically controlled by the C-Cl bond dissociation energy; the weakest C-Cl bond is faster added. The C-C reductive elimination is kinetically governed by the dissociation energy of the formed bond. The C(sp3)-C(sp2) coupling to give benzylbenzene is faster than the C(sp2)-C(sp2) bond formation to afford biphenyl. In spite of that a most demanding orientation requirement is needed for the C(sp3)-C(sp2) coupling than for the C(sp2)-C(sp2) bond formation, the energetic effort for the pregeneration of the C(sp3)-C(sp2) bond is lower. As a result, the weakest C-C bond is formed faster.

Tetrasubstituted 1,3-Enynes by Gold-Catalyzed Direct C(sp2)-H Alkynylation of Acceptor-Substituted Enamines

A gold-catalyzed synthesis of tetrasubstituted 1,3-enynes from hypervalent iodine(III) reagents and activated alkenes is reported. This reaction involves an in situ formed alkynyl Au(III) species and a subsequent direct C(sp²)-H functionalization of alkenes, offering 26 enynes in 62-92% yield with excellent functional group tolerance.

Synthesis and reactivity of iridium complexes of a macrocyclic PNP pincer ligand

Having recently reported on the synthesis and rhodium complexes of the novel macrocyclic pincer ligand PNP-14, which is derived from lutidine and features terminal phosphine donors trans-substituted with a tetradecamethylene linker (Dalton Trans., 2020, 49, 2077-2086 and Dalton Trans., 2020, 49, 16649-16652), we herein describe our findings critically examining the chemistry of iridium homologues. The five-coordinate iridium(i) and iridium(iii) complexes [Ir(PNP-14)(η2:η2-cyclooctadiene)][BArF4] and [Ir(PNP-14)(2,2'-biphenyl)][BArF4] are readily prepared and shown to be effective precursors for the generation of iridium(iii) dihydride dihydrogen, iridium(i) bis(ethylene), and iridium(i) carbonyl derivatives that highlight important periodic trends by comparison to rhodium counterparts. Reaction of [Ir(PNP-14)H2(H2)][BArF4] with 3,3-dimethylbutene induced triple C-H bond activation of the methylene chain, yielding an iridium(iii) allyl hydride derivative [Ir(PNP-14*)H][BArF4], whilst catalytic homocoupling of 3,3-dimethylbutyne into Z-tBuC[triple bond, length as m-dash]CCHCHtBu could be promoted at RT by [Ir(PNP-14)(η2:η2-cyclooctadiene)][BArF4] (TOFinitial = 28 h-1). The mechanism of the latter is proposed to involve formation and direct reaction of a vinylidene derivative with HC[triple bond, length as m-dash]CtBu outside of the macrocyclic ring and this suggestion is supported experimentally by isolation and crystallographic characterisation of a catalyst deactivation product.

Terminal Alkyne Coupling Reactions Through a Ring: Effect of Ring Size on Rate and Regioselectivity

Terminal alkyne coupling reactions promoted by rhodium(I) complexes of macrocyclic NHC-based pincer ligands-which feature dodecamethylene, tetradecamethylene or hexadecamethylene wingtip linkers viz. [Rh(CNC-n)(C2 H4 )][BArF 4 ] (n=12, 14, 16; ArF =3,5-(CF3 )2 C6 H3 )-have been investigated, using the bulky alkynes HC≡CtBu and HC≡CAr' (Ar'=3,5-tBu2 C6 H3 ) as substrates. These stoichiometric reactions proceed with formation of rhodium(III) alkynyl alkenyl derivatives and produce rhodium(I) complexes of conjugated 1,3-enynes by C-C bond reductive elimination through the annulus of the ancillary ligand. The intermediates are formed with orthogonal regioselectivity, with E-alkenyl complexes derived from HC≡CtBu and gem-alkenyl complexes derived from HC≡CAr', and the reductive elimination step is appreciably affected by the ring size of the macrocycle. For the homocoupling of HC≡CtBu, E-tBuC≡CCH=CHtBu is produced via direct reductive elimination from the corresponding rhodium(III) alkynyl E-alkenyl derivatives with increasing efficacy as the ring is expanded. In contrast, direct reductive elimination of Ar'C≡CC(=CH2 )Ar' is encumbered relative to head-to-head coupling of HC≡CAr' and it is only with the largest macrocyclic ligand studied that the two processes are competitive. These results showcase how macrocyclic ligands can be used to interrogate the mechanism and tune the outcome of terminal alkyne coupling reactions, and are discussed with reference to catalytic reactions mediated by the acyclic homologue [Rh(CNC-Me)(C2 H4 )][BArF 4 ] and solvent effects.

Rhodium(I)-NHC Complexes Bearing Bidentate Bis-Heteroatomic Acidato Ligands as gem-Selective Catalysts for Alkyne Dimerization

A series of Rh(κ² -BHetA)(η² -coe)(IPr) complexes bearing 1,3-bis-hetereoatomic acidato ligands (BHetA) including carboxylato (O,O), thioacetato (O,S), amidato (O,N), thioamidato (N,S), and amidinato (N,N), have been prepared by reaction of the dinuclear precursor [Rh(μ-Cl)(IPr)(η² -coe)]₂ with the corresponding anionic BHetA species. The Rh^I -NHC-BHetA compounds catalyze the dimerization of aryl alkynes, showing excellent selectivity for the head-to-tail enynes. Among them, the acetanilidato-based catalyst has shown an outstanding catalytic performance reaching unprecedented TOF levels of 2500 h^-1 with complete selectivity for the gem-isomer. Investigation of the reaction mechanism supports a non-oxidative pathway in which the BHetA ligand behaves as proton shuttle through intermediate κ¹ -HBHetA species. However, in the presence of pyridine as additive, the identification of the common Rh^III H(C≡CPh)₂ (IPr)(py)₂ intermediate gives support for an alternative oxidative route.

Concerted aryl-sulfur reductive elimination from PNP pincer-supported Co(iii) and subsequent Co(i)/Co(iii) comproportionation

This report discloses a combined experimental and computational study aimed at understanding C-S reductive elimination from Co(iii) supported by a diarylamido/bis(phosphine) PNP pincer ligand. Divalent (PNP)Co-aryl complexes could be easily oxidized to five-coordinate Co(iii) derivatives, and anion metathesis provided five-coordinate (PNP)Co(Ar)(SAr') complexes of Co(iii). In contrast to their previously described (POCOP)Co(Ar)(SAr') analogs, but similarly to the (PNP)Rh(Ar)(SAr') and (POCOP)Rh(Ar)(SAr') analogs, (PNP)Co(Ar)(SAr') undergo C-S reductive elimination with the formation of the desired diarylsulfide product ArSAr'. DFT studies and experimental observations are consistent with a concerted process. However, in contrast to the Rh analogs, the immediate product of such reductive elimination, the unobserved Co(i) complex (PNP)Co, un-dergoes rapid comproportionation with the (PNP)Co(Ar)(SAr') starting material to give Co(ii) compounds (PNP)Co-Ar and (PNP)Co-SAr'.

Tailored Palladium Catalysts for Selective Synthesis of Conjugated Enynes by Monocarbonylation of 1,3-Diynes

For the first time, the monoalkoxycarbonylation of easily available 1,3-diynes to give synthetically useful conjugated enynes has been realized. Key to success was the design and utilization of the new ligand 2,2'-bis(tert-butyl(pyridin-2-yl)phosphanyl)-1,1'-binaphthalene (Neolephos), which permits the palladium-catalyzed selective carbonylation under mild conditions, providing a general preparation of functionalized 1,3-enynes in good-to-high yields with excellent chemoselectivities. Synthetic applications that showcase the possibilities of this novel methodology include an efficient one-pot synthesis of 4-aryl-4H-pyrans as well as the rapid construction of various heterocyclic, bicyclic, and polycyclic compounds.

Reactions of Rh(PNP) pincer complexes with terminal alkynes: homocoupling through a ring or not at all

“Switching on” a metal's capacity to promote terminal alkyne coupling reactions using a macrocyclic pincer ligand.

Metal-Free Synthesis of Functionalized Tetrasubstituted Alkenes by Three-Component Reaction of Alkynes, Iodine, and Sodium Sulfinates

An operationally simple, efficient, and metal-/peroxide-free three-component reaction of alkynes, iodine, and sodium sulfinates has been developed for the construction of highly functionalized tetrasubstituted alkenes. Iodo- and sulfonyl-containing tetrasubstituted alkenes, such as vinyl ketones, allylic alcohols, and conjugated enynes, could be obtained regio- and stereoselectively in up to 96% yield.

Pseudo-tetrahedral Rhodium and Iridium Complexes: Catalytic Synthesis of E-Enynes

The reactions of the rhodium(I) and iridium(I) complexes [M(PhBP₃ )(C₂ H₄ )(NCMe)] (PhBP₃ =PhB(CH₂ PPh₂ )₃ ^- ) with alkynes have resulted in the synthesis of a new family of pseudo-tetrahedral complexes, [M(PhBP₃ )(RC≡CR')] (M=Rh, Ir), which contain the alkyne as a four-electron donor. The reactions of these unusual compounds with two-electron donors (L=PMe₃ , CNtBu) produced a change in the "donicity" of the alkyne from a 4e^- to a 2e^- donor to give five-coordinate complexes. These were the final products with the iridium complexes, whereas further reactions took place with the rhodium complexes. In particular, C(sp)-H bond activation of the alkyne occurred leading to hydrido alkynyl complexes. This process is essential for the further reactivity of the alkynes, and if the alkyne itself was used as reagent, E-enyne complexes were obtained. As a consequence of this chemistry, we show that the complex [Rh(PhBP₃ )(C₂ H₄ )(NCMe)] is a very efficient pre-catalyst for the regioselective di- and trimerization of terminal alkynes to E-enynes and benzene derivatives, respectively. Interestingly, acetonitrile significantly enhanced the catalytic activity by facilitating the C(sp)-H bond activation step. A hydrometalation mechanism to account for these experimental observations is proposed.

H2 addition to (Me4PCP)Ir(CO): studies of the isomerization mechanism

Reduced steric demand of the Me4PCP pincer ligand (PCP = κ3-C6H4-1,3-[CH2PR2]2, R = Me), allows for a more open metal center. This is evident through structure and reactivity comparisons between (Me4PCP)Ir derivatives and other (R4PCP)Ir complexes (R = tBu, iPr, CF3). In particular, isomerization from cis-(R4PCP)Ir(H)2(CO) to trans-(R4PCP)Ir(H)2(CO) is more facile when R = Me than when R = iPr. Deuterium incorporation in the hydride ligands from solvent C6D6 was observed during this isomerization when R = Me. This deuterium exchange has not been observed for other analogous R4PCP iridium complexes. A kinetic study of the cis/trans isomerization combined with computational studies suggests that the cis/trans isomerization proceeds through a migratory-insertion pathway involving a formyl intermediate.

Rh(DPEPhos)-Catalyzed Alkyne Hydroacylation Using β-Carbonyl-Substituted Aldehydes: Mechanistic Insight Leads to Low Catalyst Loadings that Enables Selective Catalysis on Gram-Scale

The detailed mechanism of the hydroacylation of β-amido-aldehyde, 2,2-dimethyl-3-morpholino-3-oxopropanal, with 1-octyne using [Rh( cis-κ²-_P,P-DPEPhos)(acetone)₂][BAr^F₄]-based catalysts, is described [Ar^F = (CF₃)₂C₆H₃]. A rich mechanistic landscape of competing and interconnected hydroacylation and cyclotrimerization processes is revealed. An acyl-hydride complex, arising from oxidative addition of aldehyde, is the persistent resting state during hydroacylation, and quaternary substitution at the β-amido-aldehyde strongly disfavors decarbonylation. Initial rate, KIE, and labeling studies suggest that the migratory insertion is turnover-limiting as well as selectivity determining for linear/branched products. When the concentration of free aldehyde approaches zero at the later stages of catalysis alkyne cyclotrimerization becomes competitive, to form trisubstituted hexylarenes. At this point, the remaining acyl-hydride turns over in hydroacylation and the free alkyne is now effectively in excess, and the resting state moves to a metallacyclopentadiene and eventually to a dormant α-pyran-bound catalyst complex. Cyclotrimerization thus only becomes competitive when there is no aldehyde present in solution, and as aldehyde binds so strongly to form acyl-hydride when this happens will directly correlate to catalyst loading: with low loadings allowing for free aldehyde to be present for longer, and thus higher selectivites to be obtained. Reducing the catalyst loading from 20 mol % to 0.5 mol % thus leads to a selectivity increase from 96% to ∼100%. An optimized hydroacylation reaction is described that delivers gram scale of product, at essentially quantitative levels, using no excess of either reagent, at very low catalyst loadings, using minimal solvent, with virtually no workup.

Formal oxidative addition of a C–H bond by a 16e iridium(i) complex involves metal–ligand cooperation

Metal–ligand cooperation through aromatization–dearomatization of the pyridine backbone enables the facile oxidative addition of a C–H bond by a 16e (PNP)Iridium(i) complex.

Reversible C-C bond formation at a triply cyclometallated platinum(iv) centre

The oxidation of the tribenzylphosphine derivative of the doubly cylcometallated platinum(ii) complex of diphenylpyridine, 1, with PhICl2 led, as a first step, to the formation of a highly electrophilic metal centre which attacked the benzyl phosphine to give a triply cyclometallated species as the arenium ion. The highly acidic arenium ion protonated unreacted starting 1, a reaction that could be supressed by the addition of water, and gave the neutral species 2(t). Octahedral complex 2(t) was induced to reductively couple, with two five-membered rings coupling to give square planar complex 5 containing a nine-membered ring. The crystal structure of 5 showed the nine-membered ring to span trans across the square planar metal accompanied by considerable distortion: the P-Pt-N bond angle is 155.48(5)°. Oxidation of 5 with PhICl2 resulted in the addition of two chlorides and a change of the nine-membered ring ligand coordination to cis at an octahedral centre, still with considerable distortions: the P-Pt-N bond angle in the crystal structure of 6 is 99.46(5)°. Treatment of 2(t) with AgBF4 also induced a coupling to give a nine-membered ring, and the fluxional three coordinate complex 7. A mono-methylated version of 1, Me-1, was prepared and similar reactions were observed. The presence of the methyl group allowed us to observe selectivity in the coupling reaction to give the nine-membered ring, with two products (a-Me-7 and b-Me7) being initially formed in the ratio 7 : 1. The concentrations of two products changed with time giving a final ratio of 1 : 8 at room temperature (half-life 48 hours), the equilibration being made possible by a reversible C-C bond forming reaction. Reaction of complexes 7 with CO or hydrogen left the nine-membered ring intact, though oxidative degradation resulted in decomplexation of the phosphine donor, accompanied by formation of a P[double bond, length as m-dash]O group.

Organometallic chemistry using partially fluorinated benzenes

Fluorobenzenes, in particular fluorobenzene (FB) and 1,2-difluorobenzene (1,2-DiFB), are versatile solvents for conducting organometallic chemistry and transition-metal-based catalysis.

UV-light promoted C–H bond activation of benzene and fluorobenzenes by an iridium(i) pincer complex

UV irradiation of [Ir(2,6-(P^tBu₂CH₂)₂C₆H₃)(CO)] generates the transient and reactive 14 VE Ir(i) fragment {Ir(2,6-(P^tBu₂CH₂)₂C₆H₃)}, which subsequently undergoes C–H bond activation of benzene and fluorobenzenes.

Ligand survey results in identification of PNP pincer complexes of iridium as long-lived and chemoselective catalysts for dehydrogenative borylation of terminal alkynes

Following the report on the successful use of SiNN pincer complexes of iridium as catalysts for dehydrogenative borylation of terminal alkynes (DHBTA) to alkynylboronates, this work examined a wide variety of related pincer ligands in the supporting role in DHBTA. The ligand selection included both new and previously reported ligands and was developed to explore systematic changes to the SiNN framework (the 8-(2-diisopropylsilylphenyl)aminoquinoline). Surprisingly, only the diarylamido/bis(phosphine) PNP system showed any DHBTA reactivity. The specific PNP ligand (bearing two diisopropylphosphino side donors) used in the screen showed DHBTA activity inferior to SiNN. However, taking advantage of the ligand optimization opportunities presented by the PNP system via the changes in the substitution at phosphorus led to the discovery of a catalyst whose activity, longevity, and scope far exceeded that of the original SiNN archetype. Several Ir complexes were prepared in a model PNP system and evaluated as potential intermediates in the catalytic cycle. Among them, the (PNP)Ir diboryl complex and the borylvinylidene complex were shown to be less competent in catalysis and thus likely not part of the catalytic cycle.

Mechanistic studies on C–C reductive coupling of five-coordinate Rh(iii) complexes

C–C reductive coupling of rare five-coordinate rhodium(iii) complexes has been studied in detail.

Computational insight into the mechanism of the Pd(0)–Brønsted acid cooperatively catalysed head-to-tail dimerization of terminal alkynes

The Pd(0)–Brønsted acid cooperatively catalysed head-to-tail dimerization of terminal alkynes was computationally studied to gain a mechanistic insight.