Highly Oxidizing Excited States of Re and Tc Complexes

Enter MnIV-NHC: A Dark Photooxidant with a Long-Lived Charge-Transfer Excited State

Detailed photophysical investigation of a Mn(IV)-carbene complex has revealed that excitation into its lowest-energy absorption band (∼500 nm) results in the formation of an energetic ligand-to-metal charge-transfer (LMCT) state with a lifetime of 15 ns. To the best of our knowledge, this is the longest lifetime reported for charge-transfer states of first-row-based transition metal complexes in solution, barring those based on Cu, with a d10 configuration. A so-called superoxidant, Mn(IV)-carbene exhibits an excited state potential typically only harnessed via excited states of reactive organic radical species. Furthermore, the long-lived excited state in this case is found to be a dark doublet, with its transition to the quartet ground state being spin-forbidden, a contrast to most first-row literature examples, and a possible cause of the long lifetime. Showcasing excited state properties which in some cases exceed those of complexes based on precious metals, these findings not only advance the library of earth-abundant photosensitizers but also shed general insight into the photophysics of d3 and related Mn complexes.

Application of first-row transition metal complexes bearing 1,2,3-triazolylidene ligands in catalysis and beyond

Triazole-derived N-heterocyclic carbenes, triazolylidenes (trz) have become an interesting alternative to the ubiquitous Arduengo-type imidazole-derived carbenes, in part because they are stronger donors, and in other parts due to their versatile synthesis through different types of click reactions. While the use of trz ligands has initially focused on their coordination to precious metals for catalytic applications, the recent past has seen a growing interest in their impact on first-row transition metals. Coordination of trz ligands to such 3d metals is more challenging due to the orbital mismatch between the carbene and the 3d metal center, which also affects the stability of such complexes. Here we summarize the strategies that have been employed so far to overcome these challenges and to prepare first-row transition metal complexes containing at least one trz ligand. Both properties and reactivities of these trz complexes are comprehensively compiled, with a focus on photophysical properties and, in particular, on the application of these complexes in homogeneous catalysis. The diversity of catalytic transformations entailed with these trz 3d metal complexes as well as the record-high performance in some of the reactions underpins the benefits imparted by trz ligands.

A new era of LMCT: leveraging ligand-to-metal charge transfer excited states for photochemical reactions

Ligand-to-metal charge transfer (LMCT) excited states are capable of undergoing a wide array of photochemical reactions, yet receive minimal attention compared to other charge transfer excited states. This work provides general criteria for designing transition metal complexes that exhibit low energy LMCT excited states and routes to drive photochemistry from these excited states. General design principles regarding metal identity, oxidation state, geometry, and ligand sets are summarized. Fundamental photoreactions from these states including visible light-induced homolysis, excited state electron transfer, and other photoinduced chemical transformations are discussed and key design principles for enabling these photochemical reactions are further highlighted. Guided by these fundamentals, this review outlines critical considerations for the future design and application of coordination complexes with LMCT excited states.

Doublet-emissive materials for organic light-emitting diodes: exciton formation and emission processes

Doublet-emission is mainly discovered in stable radicals, lanthanide-metal complexes with an f¹ electron configuration and transition-metal complexes with a low-spin d⁵ electron configuration, and has a distinct radiation mechanism from closed-shell luminescent molecules and thus technology opportunities. There exists an unpaired electron in the frontier molecular orbitals which enables efficient nanosecond-scale luminescence in these materials due to the spin-allowed transitions between doublet-spin states. In this review, we summarize recent advances in these materials and their application in organic light emitting diodes (OLEDs). The photoluminescence and electroluminescence mechanisms of different doublet-emissive molecular systems are discussed, in addition to the photophysical phenomena arising from doublet states. We also outline the current challenges faced by each molecular system, and the potential outlook on the future research trends in this field.

The ligand-to-metal charge transfer excited state of [Re(dmpe)3]2

The ligand-to-metal charge transfer (LMCT) transitions of [Re(dmpe)₃]²⁺ (dmpe = bis-1,2-(dimethylphosphino)ethane) were interrogated using UV/Vis absorbance spectroscopy, photoluminescence spectroscopy, and time-dependent density functional theory. The solvent dependence of the lowest energy charge transfer transition was quantified; no solvatochromism was observed. TD-DFT calculations reveal the dominant LMCT transition is highly symmetric and delocalized involving all phopshine ligand donors in the charge transfer, providing an understanding for the absence of solvatochromism of [Re(dmpe)₃]²⁺.

Redox-Based Electrochemical Affinity Sensor for Detection of Aqueous Pertechnetate Anion

Rapid, selective, and in situ detection of pertechnetate (TcO₄^-) in multicomponent matrices consisting of interfering anions such as the ubiquitous NO₃^- and Cl^- or the isostructural CrO₄^2- is challenging. Present sensors lack the selectivities to exclude these interferences or the sensitivities to meet detection limits that are lower than the drinking water standards across the globe. This work presents an affinity-based electrochemical sensor for TcO₄^- detection that relies on selective reductive precipitation of aqueous TcO₄^- induced by a 1,4-benzenedimethanethiol capture probe immobilized on an electrode platform. This results in a direct decrease in the electron transfer current, the magnitude of the decrease being proportional to the amount of TcO₄^- added. Using this approach, a detection limit of 1 × 10^-10 M was achieved, which is lower than the drinking water standard of 5.2 × 10^-10 M set by United States Environmental Protection Agency. The proposed approach shows selectivity to the TcO₄^- anion, allowing detection of TcO₄^- from a multicomponent groundwater sample obtained from a well at the Hanford site in Washington (well 299-W19-36) that also contained NO₃^-, Cl^-, and CrO₄^2-, without discernably affecting the detection limits.

Photophysics and Photochemistry of Iron Carbene Complexes for Solar Energy Conversion and Photocatalysis

Earth-abundant first row transition metal complexes are important for the development of large-scale photocatalytic and solar energy conversion applications. Coordination compounds based on iron are especially interesting, as iron is the most common transition metal element in the Earth’s crust. Unfortunately, iron-polypyridyl and related traditional iron-based complexes generally suffer from poor excited state properties, including short excited-state lifetimes, that make them unsuitable for most light-driven applications. Iron carbene complexes have emerged in the last decade as a new class of coordination compounds with significantly improved photophysical and photochemical properties, that make them attractive candidates for a range of light-driven applications. Specific aspects of the photophysics and photochemistry of these iron carbenes discussed here include long-lived excited state lifetimes of charge transfer excited states, capabilities to act as photosensitizers in solar energy conversion applications like dye-sensitized solar cells, as well as recent demonstrations of promising progress towards driving photoredox and photocatalytic processes. Complementary advances towards photofunctional systems with both Fe(II) complexes featuring metal-to-ligand charge transfer excited states, and Fe(III) complexes displaying ligand-to-metal charge transfer excited states are discussed. Finally, we outline emerging opportunities to utilize the improved photochemical properties of iron carbenes and related complexes for photovoltaic, photoelectrochemical and photocatalytic applications.

Band-selective dynamics in charge-transfer excited iron carbene complexes

A combination of ultrafast spectroscopy and DFT/TD-DFT calculations of a recently synthesised iron carbene complex elucidates the ultrafast excited state evolution processes in these systems.

In Situ Spectroscopic Analysis and Quantification of [Tc(CO)3]+ in Hanford Tank Waste

The quantitative conversion of nonpertechnetate [Tc(CO)₃]⁺ species in nuclear waste storage tank 241-AN-102 at the Hanford Site is demonstrated. A waste sample containing the [Tc(CO)₃]⁺ species is added to a developer solution that rapidly converts the nonemissive species into a luminescent complex, which is detected spectroscopically. This method was first demonstrated using a [Tc(CO)₃]⁺ sample of nonwaste containing matrix to determine a detection limit (LOD), resulting in a [Tc(CO)₃]⁺ LOD of 2.20 × 10^-7 M, very near the LOD of the independently synthesized standard (2.10 × 10^-7 M). The method was then used to detect [Tc(CO)₃]⁺ in a simulated waste using the standard addition method, resulting in a [Tc(CO)₃]⁺ concentration of 1.89 × 10^-5 M (within 27.7% of the concentration determined by β liquid scintillation counting). Three samples from 241-AN-102 were tested by the standard addition method: (1) a 5 M Na adjusted fraction, (2) a fraction depleted of ¹³⁷Cs, and (3) an acid-stripped eluate. The concentrations of [Tc(CO)₃]⁺ in these fractions were determined to be 9.90 × 10^-6 M (1), 0 M (2), and 2.46 × 10^-6 M (3), respectively. The concentration of [Tc(CO)₃]⁺ in the as-received AN-102 tank waste supernatant was determined to be 1.84 × 10^-5 M.

In Situ Quantification of [Re(CO)3]+ by Fluorescence Spectroscopy in Simulated Hanford Tank Waste

A pretreatment protocol is presented that allows for the quantitative conversion and subsequent in situ spectroscopic analysis of [Re(CO)₃]⁺ species in simulated Hanford tank waste. In this test case, the nonradioactive metal rhenium is substituted for technetium (Tc-99), a weak beta emitter, to demonstrate proof of concept for a method to measure a nonpertechnetate form of technetium in Hanford tank waste. The protocol encompasses adding a simulated waste sample containing the nonemissive [Re(CO)₃]⁺ species to a developer solution that enables the rapid, quantitative conversion of the nonemissive species to a luminescent species which can then be detected spectroscopically. The [Re(CO)₃]⁺ species concentration in an alkaline, simulated Hanford tank waste supernatant can be quantified by the standard addition method. In a test case, the [Re(CO)₃]⁺ species was measured to be at a concentration of 38.9 μM, which was a difference of 2.01% from the actual concentration of 39.7 μM.

A low-spin Fe(iii) complex with 100-ps ligand-to-metal charge transfer photoluminescence

Transition-metal complexes are used as photosensitizers, in light-emitting diodes, for biosensing and in photocatalysis. A key feature in these applications is excitation from the ground state to a charge-transfer state; the long charge-transfer-state lifetimes typical for complexes of ruthenium and other precious metals are often essential to ensure high performance. There is much interest in replacing these scarce elements with Earth-abundant metals, with iron and copper being particularly attractive owing to their low cost and non-toxicity. But despite the exploration of innovative molecular designs, it remains a formidable scientific challenge to access Earth-abundant transition-metal complexes with long-lived charge-transfer excited states. No known iron complexes are considered photoluminescent at room temperature, and their rapid excited-state deactivation precludes their use as photosensitizers. Here we present the iron complex [Fe(btz)₃]³⁺ (where btz is 3,3'-dimethyl-1,1'-bis(p-tolyl)-4,4'-bis(1,2,3-triazol-5-ylidene)), and show that the superior σ-donor and π-acceptor electron properties of the ligand stabilize the excited state sufficiently to realize a long charge-transfer lifetime of 100 picoseconds (ps) and room-temperature photoluminescence. This species is a low-spin Fe(iii) d⁵ complex, and emission occurs from a long-lived doublet ligand-to-metal charge-transfer (²LMCT) state that is rarely seen for transition-metal complexes. The absence of intersystem crossing, which often gives rise to large excited-state energy losses in transition-metal complexes, enables the observation of spin-allowed emission directly to the ground state and could be exploited as an increased driving force in photochemical reactions on surfaces. These findings suggest that appropriate design strategies can deliver new iron-based materials for use as light emitters and photosensitizers.

Bimolecular photoinduced electron transfer beyond the diffusion limit: the Rehm-Weller experiment revisited with femtosecond time resolution

To access the intrinsic, diffusion free, rate constant of bimolecular photoinduced electron transfer reactions, fluorescence quenching experiments have been performed with 14 donor/acceptor pairs, covering a driving-force range going from 0.6 to 2.4 eV, using steady-state and femtosecond time-resolved emission, and applying a diffusion-reaction model that accounts for the static and transient stages of the quenching for the analysis. The intrinsic electron transfer rate constants are up to 2 orders of magnitude larger than the diffusion rate constant in acetonitrile. Above ∼1.5 eV, a slight decrease of the rate constant is observed, pointing to a much weaker Marcus inverted region than those reported for other types of electron transfer reactions, such as charge recombination. Despite this, the driving force dependence can be rationalized in terms of Marcus theory.

Excited-state characteristics of tetracyanidonitridorhenium(V) and -technetium(V) complexes with N-heteroaromatic ligands

Six-coordinate tetracyanidonitridorhenium(V) and -technetium(V) with axial N-heteroaromatic ligands, (PPh4)2[MN(CN)4L] [M = Re, L = 4-(dimethylamino)pyridine (dmap), 3,5-lutidine (lut), 4-picoline (pic), 4-phenylpyridine (ppy), pyridine (py), 3-benzoylpyridine (3bzpy), 4,4'-bipyridine (bpy), pyrazine (pz), 4-cyanopyridine (cpy), or 4-benzoylpyridine (4bzpy); M = Tc, L = dmap, lut, pic, py, pz, or cpy] were synthesized and characterized. The crystal structures of 11 complexes were determined by single-crystal X-ray analysis. All of the complexes showed photoluminescence in the crystalline phase at room temperature. The emission maximum wavelengths (λ(em)) of the rhenium complexes with dmap, lut, pic, ppy, or py were similar to one another with a quite high emission quantum yield (Φ(em)): λ(em) = 539-545 nm, Φ(em) = 0.39-0.93, and emission lifetime (τ(em)) = 10-45 μs at 296 K. The emission spectra at 77 K exhibited vibronic progressions, and the emissive excited state is characterized as (3)[(d(xy))(1)(dπ*)(1)] (dπ* = d(xz), d(yz)). On the other hand, the emission maximum wavelength of the rhenium complex with 3bzpy, bpy, pz, cpy, or 4bzpy was significantly dependent on the nature of the axial ligand in the crystalline phase: λ(em) = 564-669 nm, Φ(em) ≤ 0.01-0.36, and τ(em) = 0.03-13.3 μs at 296 K. The emission spectra at 77 K in the crystalline phase did not show vibronic progressions. The emissive excited state of the rhenium complex with bpy, pz, cpy, or 4bzpy is assignable to originate from the metal-to-N-heteroaromatic ligand charge-transfer (MLCT)-type emission with a spin-triplet type. The change in the excited-state characteristics of rhenium complexes by the N-heteroaromatic ligand is a result of stabilization of the π* orbital of the N- heteroaromatic ligand to a lower energy level than the dπ* orbitals. The emission spectral shapes of technetium complexes were almost independent of the nature of the N-heteroaromatic ligand with λ(em) = 574-581 nm at room temperature. The different emission characteristics between the pz and cpy coordinate rhenium complexes and the technetium analogues would be due to stabilization of technetium-centered orbitals compared with the rhenium ones in energy.

Multimodal radio- (PET/SPECT) and fluorescence imaging agents based on metallo-radioisotopes: current applications and prospects for development of new agents

This perspective focuses on complexes of radioactive metal ions applied in multimodal radio- and optical imaging. The application of metal ions in radioimaging techniques such as Positron Emission Tomography (PET) and Single Photon Emission Computed Tomography (SPECT) has advantages over lighter nuclei in terms of half-life, but there are particular issues related to their speciation (particularly leaching from complexes) and with the combination of certain ions with fluorescent systems. The basic coordination chemistry of the ions involved and issues relating to biological conditions and their compatibility with optical imaging techniques are reviewed, the current literature presented in context, and the prospect of exploiting the intrinsic luminescence of certain metal-ligand complexes is discussed.

trans-K(3)[TcO(2)(CN)(4)]

The structure of the title compound, tripotassium trans-tetra-cyanidodioxidotechnetate(V), is isotypic with its Re analogue. The [TcO(2)(CN)(4)](3-)trans-tetra-cyanido-dioxido-technetate anion has a slightly distorted octa-hedral configuration. The Tc atom is located on a center of inversion and is bound to two O atoms in axial and to four cyanide ligands in equatorial positions. The Tc-O distance is consistent with a double-bond character. The two potassium cations, one located on a center of inversion and one in a general position, reside in octa-hedral or tetra-hedral environments, respectively. K⋯O and K⋯N inter-actions occur in the 2.7877 (19)-2.8598 (15) Å range.