X-ray absorption spectroscopic and theoretical studies on (L)2[Cu2(S2)n]2+ complexes: disulfide versus disulfide(*1-) bonding

Sulfur-Containing Analogues of the Reactive [CuOH]2+ Core

With the aim of drawing comparisons to the highly reactive complex LCuOH (L = bis(2,6-diisopropylphenylcarboxamido)pyridine), the complexes [Bu₄N][LCuSR] (R = H or Ph) were prepared, characterized by spectroscopy and X-ray crystallography, and oxidized at low temperature to generate the species assigned as LCuSR on the basis of spectroscopy and theory. Consistent with the smaller electronegativity of S versus O, redox potentials for the LCuSR^-/0 couples were ∼50 mV lower than for LCuOH^-/0, and the rates of the proton-coupled electron transfer reactions of LCuSR with anhydrous 1-hydroxy-2,2,6,6-tetramethyl-piperidine at -80 °C were significantly slower (by more than 100 times) than the same reaction of LCuOH. Density functional theory (DFT) and time-dependent DFT calculations on LCuZ (Z = OH, SH, SPh) revealed subtle differences in structural and UV-visible parameters. Further comparison to complexes with Z = F, Cl, and Br using complete active space (CAS) self-consistent field and localized orbital CAS configuration interaction calculations along with a valence-bond-like interpretation of the wave functions showed differences with previously reported results ( J. Am. Chem. Soc. 2020, 142, 8514), and argue for a consistent electronic structure across the entire series of complexes, rather than a change in the nature of the ligand field arrangement for Z = F.

Impact of Electronic and Steric Changes of Ligands on the Assembly, Stability, and Redox Activity of Cu4(μ4-S) Model Compounds of the CuZ Active Site of Nitrous Oxide Reductase (N2OR)

Model compounds have been widely utilized in understanding the structure and function of the unusual Cu₄(μ₄-S) active site (Cu_Z) of nitrous oxide reductase (N₂OR). However, only a limited number of model compounds that mimic both structural and functional features of Cu_Z are available, limiting insights about Cu_Z that can be gained from model studies. Our aim has been to construct Cu₄(μ₄-S) clusters with tailored redox activity and chemical reactivity via modulating the ligand environment. Our synthetic approach uses dicopper(I) precursor complexes (Cu₂L₂) that assemble into a Cu₄(μ₄-S)L₄ cluster with the addition of an appropriate sulfur source. Here, we summarize the features of the ligands L that stabilize precursor and Cu₄(μ₄-S) clusters, along with the alternative products that form with inappropriate ligands. The precursors are more likely to rearrange to Cu₄(μ₄-S) clusters when the Cu(I) ions are supported by bidentate ligands with 3-atom bridges, but steric and electronic features of the ligand also play crucial roles. Neutral phosphine donors have been found to stabilize Cu₄(μ₄-S) clusters in the 4Cu(I) oxidation state, while neutral nitrogen donors could not stabilize Cu₄(μ₄-S) clusters. Anionic formamidinate ligands have been found to stabilize Cu₄(μ₄-S) clusters in the 2Cu(I):2Cu(II) and 3Cu(I):1Cu(II) states, with both the formation of the dicopper(I) precursors and subsequent assembly of clusters being governed by the steric factor at the ortho positions of the N-aryl substituents. Phosphaamidinates, which combine a neutral phosphine donor and an anionic nitrogen donor in the same ligand, form multinuclear Cu(I) clusters unless the negative charge is valence-trapped on nitrogen, in which case the resulting dicopper precursor is unable to rearrange to a multinuclear cluster. Taken together, the results presented in this study provide design criteria for successful assembly of synthetic model clusters for the Cu_Z active site of N₂OR, which should enable future insights into the chemical behavior of Cu_Z.

XANES and EXAFS of dilute solutions of transition metals at XFELs

This work has demonstrated that X-ray absorption spectroscopy (XAS), both Mn XANES and EXAFS, of solutions with millimolar concentrations of metal is possible using the femtosecond X-ray pulses from XFELs. Mn XAS data were collected using two different sample delivery methods, a Rayleigh jet and a drop-on-demand setup, with varying concentrations of Mn. Here, a new method for normalization of XAS spectra based on solvent scattering that is compatible with data collection from a highly variable pulsed source is described. The measured XANES and EXAFS spectra of such dilute solution samples are in good agreement with data collected at synchrotron sources using traditional scanning protocols. The procedures described here will enable XFEL-based XAS on dilute biological samples, especially metalloproteins, with low sample consumption. Details of the experimental setup and data analysis methods used in this XANES and EXAFS study are presented. This method will also benefit XAS performed at high-repetition-rate XFELs such as the European XFEL, LCLS-II and LCLS-II-HE.

A Cu4S model for the nitrous oxide reductase active sites supported only by nitrogen ligands

To model the (His)7Cu4Sn (n = 1 or 2) active sites of nitrous oxide reductase, the first Cu4(μ4-S) cluster supported only by nitrogen donors has been prepared using amidinate supporting ligands. Structural, magnetic, spectroscopic, and computational characterization is reported. Electrochemical data indicates that the 2-hole model complex can be reduced reversibly to the 1-hole state and irreversibly to the fully reduced state.

Quantitative X-ray Absorption and Emission Spectroscopies: Electronic Structure Elucidation of Cu2S and CuS

The electronic structures of Cu₂S and CuS have been under intense scrutiny, with the aim of understanding the relationship between their electronic structures and commercially important physical properties. Here, X-ray absorption and emission spectroscopic data have been analyzed using a quantitative, molecular orbital (MO) based approach to understand the electronic structure of these two complex systems. Cu₂S is shown to have a significant amount of Cu²⁺ sites and therefore Cu⁰ centers. The presence of low-valent Cu is correlated with the electrical conductivity of Cu₂S, especially at high temperatures. CuS is shown to have tetrahedral Cu²⁺ and trigonal Cu¹⁺ sites, with crystal planes that have alternating high and low charge on the Cu centers. These alternating charges may contribute to internal energy transitions required for photoluminescence properties. The in-depth electronic structure solutions presented here not only solve a complicated much-debated problem, but also demonstrate the strength of quantitative MO based approach to X-ray spectroscopies.

X-ray absorption near-edge spectroscopy in bioinorganic chemistry: Application to M-O2 systems

Metal K-edge X-ray absorption spectroscopy (XAS) has been extensively applied to bioinorganic chemistry to obtain geometric structure information on metalloprotein and biomimetic model complex active sites by analyzing the higher energy extended X-ray absorption fine structure (EXAFS) region of the spectrum. In recent years, focus has been on developing methodologies to interpret the lower energy K-pre-edge and rising-edge regions (XANES) and using it for electronic structure determination in complex bioinorganic systems. In this review, the evolution and progress of 3d-transition metal K-pre-edge and rising-edge methodology development is presented with particular focus on applications to bioinorganic systems. Applications to biomimetic transition metal-O₂ intermediates (M = Fe, Co, Ni and Cu) are reviewed, which demonstrate the power of the method as an electronic structure determination technique and its impact in understanding the role of supporting ligands in tuning the electronic configuration of transition metal-O₂ systems.

X-ray absorption spectroscopic and computational investigation of a possible S···S interaction in the [Cu3S2]3+ core

The electronic structure of the [Cu(3)S(2)](3+) core of [(LCu)(3)(S)(2)](3+) (L = N,N,N',N'-tetramethyl-2R,3R-cyclohexanediamine) is investigated using a combination of Cu and S K-edge X-ray absorption spectroscopy and calculations at the density functional and multireference second-order perturbation levels of theory. The results show that the [Cu(3)S(2)](3+) core is best described as having all copper centers close to but more oxidized than Cu(2+), while the charge on the S(2) fragment is between that of a sulfide (S(2-)) and a subsulfide (S(2)(3-)) species. The [Cu(3)S(2)](3+) core thus is different from a previously described, analogous [Cu(3)O(2)](3+) core, which has a localized [(Cu(3+)Cu(2+)Cu(2+))(O(2-))(2)](3+) electronic structure. The difference in electronic structure between the two analogues is attributed to increased covalent overlap between the Cu 3d and S 3p orbitals and the increased radial distribution function of the S 3p orbital (relative to O 2p). These features result in donation of electron density from the S-S σ* to the Cu and result in some bonding interaction between the two S atoms at ~2.69 Å in [Cu(3)S(2)](3+), stabilizing a delocalized S = 1 ground state.

Reactions of Ph3Sb═S with copper(I) complexes supported by N-donor ligands: formation of stable adducts and S-transfer reactivity

In the exploration of sulfur-delivery reagents useful for synthesizing models of the tetracopper-sulfide cluster of nitrous oxide reductase, reactions of Ph(3)Sb═S with Cu(I) complexes of N,N,N',N'-tetramethyl-2R,3R-cyclohexanediamine (TMCHD) and 1,4,7-trialkyltriazacyclononanes (R(3)tacn; R = Me, Et, iPr) were studied. Treatment of [(R(3)tacn)Cu(NCCH(3))]SbF(6) (R = Me, Et, or iPr) with 1 equiv of S═SbPh(3) in CH(2)Cl(2) yielded adducts [(R(3)tacn)Cu(S═SbPh(3))]SbF(6) (1-3), which were fully characterized, including by X-ray crystallography. The adducts slowly decayed to [(R(3)tacn)(2)Cu(2)(μ-η(2):η(2)-S(2))](2+) species (4-6) and SbPh(3), or more quickly in the presence of additional [(R(3)tacn)Cu(NCCH(3))]SbF(6) to 4-6 and [(R(3)tacn)Cu(SbPh(3))]SbF(6) (7-9). The results of mechanistic studies of the latter process were consistent with rapid intermolecular exchange of S═SbPh(3) between 1-3 and added [(R(3)tacn)Cu(NCCH(3))]SbF(6), followed by conversion to product via a dicopper intermediate formed in a rapid pre-equilibrium step. Key evidence supporting this step came from the observation of saturation behavior in a plot of the initial rate of loss of 1 versus the initial concentration of [(Me(3)tacn)Cu(NCCH(3))]SbF(6). Also, treatment of [(TMCHD)Cu(CH(3)CN)]PF(6) with S═SbPh(3) led to the known tricopper cluster [(TMCHD)(3)Cu(3)(μ(3)-S)(2)](PF(6))(3) in good yield (79%), a synthetic procedure superior to that previously reported (Brown, E. C.; York, J. T.; Antholine, W. E.; Ruiz, E.; Alvarez, S.; Tolman, W. B. J. Am. Chem. Soc. 2005, 127, 13752-13753).

Sulfur donor atom effects on copper(I)/O(2) chemistry with thioanisole containing tetradentate N(3)S ligand leading to μ-1,2-peroxo-dicopper(II) species

To better understand the effect of thioether coordination in copper-O(2) chemistry, the tetradentate N(3)S ligand L(ASM) (2-(methylthio)-N,N-bis((pyridin-2-yl)methyl)benzenamine) and related alkylether ligand L(EOE) (2-ethoxy-N,N-bis((pyridin-2-yl)methyl)ethanamine) have been studied. The corresponding copper(I) complexes, [(L(ASM))Cu(I)](+) (1a) and [(L(EOE))Cu(I)](+) (3a), were studied as were the related compound [(L(ESE))Cu(I)](+) (2a, L(ESE) = (2-ethylthio-N,N-bis((pyridin-2-yl)methyl)ethanamine). The X-ray structure of 1a and its solution conductivity reveal a monomeric molecular structure possessing thioether coordination which persists in solution. In contrast, the C-O stretching frequencies of the derivative Cu(I)-CO complexes reveal that for these complexes, the modulated ligand arms, whether arylthioether, alkylthioether, or ether, are not coordinated to the cuprous ion. Electrochemical data for 1a and 2a in CH(3)CN and N,N-dimethylformamide (DMF) show the thioanisole moiety to be a poor electron donor compared to alkylthioether (1a is ∼200 mV more positive than 2a). The structures of [(L(ASM))Cu(II)(CH(3)OH)](2+) (1c) and [(L(ESE))Cu(II)(CH(3)OH)](2+) (2c) have also been obtained and indicate nearly identical copper coordination environments. Oxygenation of 1a at reduced temperature gives a characteristic deep blue intermediate [{(L(ASM))Cu(II)}(2)(O(2)(2-))](2+) (1b(P)) with absorption features at 442 (1,500 M(-1) cm(-1)), 530 (8,600 M(-1) cm(-1)), and 605 nm (10,400 M(-1) cm(-1)); these values compare well to the ligand-to-metal charge-transfer (LMCT) transitions previously reported for [{(L(ESE))Cu(II)}(2)(O(2)(2-))](2+) (2b(P)). Resonance Raman data for [{(L(ASM))Cu(II)}(2)(O(2)(2-))](2+) (1b(P)) support the formation of μ-1,2-peroxo species ν(O-O) = 828 cm(-1)(Δ((18)O(2)) = 48), ν(sym)(Cu-O) = 547 cm(-1) (Δ((18)O(2)) = 23), and ν(asym)(Cu-O) = 497 cm(-1) (Δ((18)O(2)) = 22) and suggest the L(ASM) ligand is a poorer electron donor to copper than is L(ESE). In contrast, the oxygenation of [(L(EOE))Cu(I)](+) (3a), possessing an ether donor as an analogue of the thioether in L(ESE), led to the formation of a bis(μ-oxo) species [{(L(EOE))Cu(III)}(2)(O(2-))(2)](2+) (3b(O); 380 nm, ε ∼ 10,000 M(-1) cm(-1)). This result provides further support for the sulfur influence in 1b(P) and 2b(P), in particular coordination of the sulfur to the Cu. Thermal decomposition of 1b(P) is accompanied by ligand sulfoxidation. The structure of [{(L(EOE))Cu(II)(Cl)}(2)](+) (3c) generated from the reductive dehalogenation of organic chlorides suggests that the ether moiety is weakly bound to the cupric ion. A detailed discussion of the spectroscopic and structural characteristics of 1b(P), 2b(P), and 3b(O) is presented.

Reduction of nitrous oxide to dinitrogen by a mixed valent tricopper-disulfido cluster

The greenhouse gas N(2)O is converted to N(2) by a mu-sulfido-tetracopper active site in the enzyme nitrous oxide reductase (N(2)OR) via a process postulated to involve mu-1,3 coordination of N(2)O to two Cu(I) ions. In efforts to develop synthetic models of the site with which to test mechanistic hypotheses, we have prepared a localized mixed valent Cu(II)Cu(I)(2) cluster bridged in a mu-eta(2):eta(1):eta(1) fashion by disulfide, [L(3)Cu(3)(mu(3)-S(2))]X(2) (L = 1,4,7-trimethyl-triazacyclononane, X = O(3)SCF(3)(-) or SbF(6)(-)). This cluster exhibits spectroscopic features superficially similar to those of the active site in N(2)OR and reacts with N(2)O to yield N(2) in a reaction that models the function of the enzyme. Computations implicate a transition state structure that features mu-1,1-bridging of N(2)O via its O-atom to a [L(2)Cu(2)(mu-S(2))](+) fragment and provide chemical precedence for an alternative pathway for N(2)O reduction by N(2)OR.

Binding and activation of N2O at transition-metal centers: recent mechanistic insights

No laughing matter, nitrous oxide's role in stratospheric ozone depletion and as a greenhouse gas has stimulated great interest in developing and understanding its decomposition, particularly through the use of transition-metal promoters. Recent advances in our understanding of the reaction pathways for N(2)O reduction by metal ions in the gas phase and in heterogeneous, homogeneous, and biological catalytic systems have provided provocative ideas about the structure and properties of metal N(2)O adducts and derived intermediates. These ideas are likely to inform efforts to design more effective catalysts for N(2)O remediation.

S-S bond reactivity in metal-perthiocarboxylato compounds

While M-percarboxylato species are elusive intermediates, their sulfur containing analogues are known in some cases. The feasibility of isolation of M-perthioacetato compounds allowed, in this work, to obtain new insights into the pathways that follow the reactivity of M-E-ER (E = O, S) fragments. Herein we report on the isolation of two new M-perthioacetato compounds: trans-[Pt(CH(3)CS(2)S)(2)] () and [Ni(CH(3)CSS)(CH(3)CS(2)S)] (), which have been fully characterized, including X-ray structures. Reactivity of these compounds towards PPh(3) has been studied combining UV-vis monitorization and NMR measurements. Overall the accumulated data suggest that the evolution of the perthioacetato ligand in complexes and by reaction with PPh(3) consists of a complex multistep pathway in which the sulfur transfer is preceded by electron transfer. Cyclic voltammetry measurements indicate that the transference of two electrons from the phosphorus to the sulfur atom is not concerted, suggesting that the first step of the reaction with PPh(3) is the monoelectronic electron transfer followed by P-S bond formation. The results presented here show a novel pathway in the field of S-S bond reactivity processes relevant in biological, synthetic systems and in hydrocarbon desulfurization processes.

Density functional theory for transition metals and transition metal chemistry

We introduce density functional theory and review recent progress in its application to transition metal chemistry. Topics covered include local, meta, hybrid, hybrid meta, and range-separated functionals, band theory, software, validation tests, and applications to spin states, magnetic exchange coupling, spectra, structure, reactivity, and catalysis, including molecules, clusters, nanoparticles, surfaces, and solids.

Is 2.07 A a record for the shortest Pt-S distance? Revision of two reported X-ray structures

The comparison of the very similar compounds (Ph(3)P)(2)Pt(mu-S)(2)Pt(PPh(3))(2) (1) and (Ph(2)PyP)(2)Pt(mu-S)(2)Pt(PPh(2)Py)(2) (2) raises intriguing questions about the reliability of the reported Pt(2)S(2) core in 1, where the Pt-S bonds are the shortest ever reported. Also, the trans-annular S...S separation of 2.69 A is surprisingly shorter in 1 than in 2 (3.01 A), but no incipient coupling between two S(2-) bridges seems reasonable in this case. Various considerations lead to reformulate 1 as [(Ph(3)P)(2)Pt(mu-OH)(2)Pt(PPh(3))(2)](BF(4))(2), 3. The sets of cell parameters for 1 and 3 are not equal but two axes match, and the volume of 1 is exactly double. Simple matrices may be constructed to interconvert the direct and reciprocal crystalline cells, thus corroborating their identity of the compounds. It is concluded that, in the structure solution of 1, some atoms were either neglected (BF(4)(-) counterions) or ill identified (sulfido in place of hydroxo bridges), while the structure of 3 was solved by collecting only one-half of the possible reflections (hence, also the different space groups). A new preparation, crystallization and X-ray structure of 3 confirms the above points and dismisses any other theoretical conjecture about two electronically different Pt(2)S(2) cores in 1 and 2.

X-X through-cage bonding in Cu, Ni, and Cr complexes with M3X2 cores (X=S, As)

Density functional calculations on trinuclear complexes bridged by two sulfur atoms, [(tmeda)(3)Cu(3)(mu-S)(2)](3+), [(tmeda)(3)Ni(3)(mu-S)(2)](2+), and [(tmeda)(3)Ni(3)(mu-S(2))](4+), as well as on the formation of [(tmeda)(3)Cu(3)(mu-S)(2)](3+) from a dinuclear [(tmeda)(2)Cu(2)(mu-S(2))](2+) complex and a mononuclear [(tmeda)Cu(eta(2)-S(2))](+) fragment, are reported. A qualitative orbital analysis of the M(3)X(2) framework bonding is presented for the case in which each metal atom M has a square planar coordination sphere completed by one bidentate or two monodentate ligands (that is, [(L(2)M)(3)X(2)] compounds). It is concluded that a framework electron count (FEC) of 12 corresponds to systems with six M-X bonds but no X-X bond through the cage, while an FEC of 10 favors the formation of an X-X bond. Framework electron counting rules are also presented for related M(3)X(2) cores in [(L(5)M)(3)X(2)] complexes, based on a qualitative molecular orbital (MO) analysis supported by DFT calculations on [(OC)(15)Cr(3)(mu-As(2))].

Copper-Carbon Bonds in Mechanistic and Structural Probing of Proteins as well as in Situations where Copper is a Catalytic or Receptor Site

While copper-carbon bonds are well appreciated in organometallic synthetic chemistry, such occurrences are less known in biological settings. By far, the greatest incidence of copper-carbon moieties is in bioinorganic research aimed at probing copper protein active site structure and mechanism; for example, carbon monoxide (CO) binding as a surrogate for O2. Using infrared (IR) spectroscopy, CO coordination to cuprous sites has proven to be an extremely useful tool for determining active site copper ligation (e.g., donor atom number and type). The coupled (hemocyanin, tyrosinase, catechol oxidase) and non-coupled (peptidylglycine α-hydroxylating monooxygenase, dopamine β-monooxygenase) binuclear copper proteins as well as the heme-copper oxidases (HCOs) have been studied extensively via this method. In addition, environmental changes within the vicinity of the active site have been determined based on shifts in the CO stretching frequencies, such as for copper amine oxidases, nitrite reductases and again in the binuclear proteins and HCOs. In many situations, spectroscopic monitoring has provided kinetic and thermodynamic data on CuI-CO formation and CO dissociation from copper(I); recently, processes occurring on a femtosecond timescale have been reported. Copper-cyano moieties have also been useful for obtaining insights into the active site structure and mechanisms of copper-zinc superoxide dismutase, azurin, nitrous oxide reductase, and multi-copper oxidases. Cyanide is a good ligand for both copper(I) and copper(II), therefore multiple physical-spectroscopic techniques can be applied. A more obvious occurrence of a “Cu-C” moiety was recently described for a CO dehydrogenase which contains a novel molybdenum-copper catalytic site. A bacterial copper chaperone (CusF) was recently established to have a novel d-π interaction comprised of copper(I) with the arene containing side-chain of a tryptophan amino acid residue. Meanwhile, good evidence exists that a plant receptor site (ETR1) utilizes copper(I) to sense ethylene, a growth hormone. A copper olfactory receptor has also been suggested. All of the above mentioned occurrences or uses of carbon-containing substrates and/or probes are reviewed and discussed within the framework of copper proteins and other relevant systems.