Electrochemical method for the determination of enantiomeric excess of binol using redox-active boronic acids as chiral sensors

π-π+ Interaction Promoting the Absorption of Electroactive Chiral Selectors into the Cavity of Conductive Covalent Organic Framework for Enantioselective Sensing of Electrochemically Silent Molecules

To date, achieving enantioselective electroanalysis for electrochemically silent chiral molecules is still highly desired. Here, an ionic covalent organic framework (COF) consisting of the pyridinium cation was derived from the tripyridinium Zincke salt and 1,4-phenylenediamine in a one-pot reaction. The electrochemical measurements revealed that the ionic backbone contributed to the electron transfer with a low charge transfer resistance. Besides, the π-π+ interaction between the pyridinium cation and ferrocenyl unit can promote the absorption of electroactive chiral ferrocenyl reagents into the hole of COF, so as to afford the electrochemical signals by themselves, replacing the testing enantiomers. As a result, the electroactive complex used as an electrochemical platform was highly effective at enantiomerically recognizing amino alcohols (prolinol, valinol, leucinol, and alaninol) and amino acids (methionine, serine, and penicillamine), giving the ratios of current intensity between l- and d-enantiomers in the range of 1.46-1.72. Moreover, the density functional theory calculations determined the possible intermolecular interactions between the testing enantiomers and chiral selector: namely, hydrogen bonds and electrostatic attractions. Overall, the present work offers an effective strategy to enlarge the electrochemical scope for chiral recognition based on electroactive chiral COFs.

A Liquid-Liquid Interfacial Strategy for Construction of Electroactive Chiral Covalent-Organic Frameworks with the Aim to Enlarge the Testing Scope of Chiral Electroanalysis

Although electroactive chiral covalent-organic frameworks (CCOFs) are considered an ideal platform for chiral electroanalysis, they are rarely reported due to the difficult selection of suitable precursors. Here, a facile strategy of liquid-liquid interfacial polymerization was carried out to synthesize the target electroactive CCOFs Ph-Py+-(S,S)-DPEA·PF6- and Ph-Py+-(R,R)-DPEA·PF6-. That is, a trivalent Zincke salt (4,4',4″-(benzene-1,3,5-triyl)tris(1-(2,4-dinitrophenyl)pyridin-1-ium)) trichloride (Ph-Py+-NO2) and enantiopure 1,2-diphenylethylenediamine (DPEA) were dissolved in water and chloroform, respectively. The Zincke reaction occurs at the interface, resulting in uniform porosity. As expected, the cyclic voltammetry and differential pulse voltammetry measurements showed that the tripyridinium units of the CCOFs afforded obvious electrochemical responses. When Ph-Py+-(S,S)-DPEA·PF6- was modified onto the surface of a glassy carbon electrode as a chiral sensor, the molecules, which included tryptophan, aspartic acid, serine, tyrosine, glutamic acid, mandelic acid, and malic acid, were enantioselectively recognized in the response of the peak current. Very importantly, the discriminative electrochemical signals were derived from Ph-Py+-(S,S)-DPEA·PF6-. The best peak current ratios between l- and d-enantiomers were in the range of 1.31-2.68. Besides, a good linear relationship between peak currents and enantiomeric excess (ee) values was established, which was successfully harnessed to determine the ee values for unknown samples. In a word, the current work provides new insight and potential of electroactive CCOFs for enantioselective sensing in a broad range.

BINOL as a Chiral Solvating Agent for Sulfiniminoboronic Acids

1H NMR spectroscopic studies using BINOL as a chiral solvating agent (CSA) for a scalemic sulfiniminoboronic acid (SIBA) have revealed concentration- and enantiopurity-dependent variations in the chemical shifts of diagnostic imine protons used to determine enantiopurity levels. 11B/15N NMR spectroscopic studies and X-ray structural investigations revealed that unlike other iminoboronate species, BINOL-SIBA assemblies do not contain N-B coordination bonds, with 1H NMR NOESY experiments indicating that intermolecular H-bonding networks between BINOL and the SIBA analyte are responsible for these variations. These effects can lead to diastereomeric signal overlap at certain er values that could potentially lead to enantiopurity/configuration misassignments. Consequently, it is recommended that hydrogen-bonding-CSA-based 1H NMR protocols should be repeated using both CSA enantiomers to ensure that any concentration- and/or er-dependent variations in diagnostic chemical shifts are accounted for when determining the enantiopurity of a scalemic analyte.

Chiral molecular imprinting-based SERS detection strategy for absolute enantiomeric discrimination

Chiral discrimination is critical in environmental and life sciences. However, an ideal chiral discrimination strategy has not yet been developed because of the inevitable nonspecific binding entity of wrong enantiomers or insufficient intrinsic optical activities of chiral molecules. Here, we propose an "inspector" recognition mechanism (IRM), which is implemented on a chiral imprinted polydopamine (PDA) layer coated on surface-enhanced Raman scattering (SERS) tag layer. The IRM works based on the permeability change of the imprinted PDA after the chiral recognition and scrutiny of the permeability by an inspector molecule. Good enantiomer can specifically recognize and fully fill the chiral imprinted cavities, whereas the wrong cannot. Then a linear shape aminothiol molecule, as an inspector of the recognition status is introduced, which can only percolate through the vacant and nonspecifically occupied cavities, inducing the SERS signal to decrease. Accordingly, chirality information exclusively stems from good enantiomer specific binding, while nonspecific recognition of wrong enantiomer is curbed. The IRM benefits from sensitivity and versatility, enabling absolute discrimination of a wide variety of chiral molecules regardless of size, functional groups, polarities, optical activities, Raman scattering, and the number of chiral centers.

Competitive Self-Assembly Interaction between Ferrocenyl Units and Amino Acids for Entry into the Cavity of β-Cyclodextrin for Chiral Electroanalysis

At present, chiral electroanalysis of nonelectroactive chiral compounds still remains a challenge because they cannot provide an electrochemical signal by themselves. Here, a strategy based on a competitive self-assembly interaction of a ferrocene (Fc) unit and the testing isomers entering into the cavity of β-cyclodextrin (β-CD) was carried out for chiral electroanalysis. First of all, the Fc derivative was directly bridged to silica microspheres, followed by inclusion into the cavity of β-CD. As expected, once it was modified onto the surface of a carbon working electrode as an electrochemical sensor, SiO₂@Fc-CD-WE, its differential pulse voltammetry signal would markedly decrease compared with the uncovered Fc. Next, when l- and d-isomers of amino acids that included histidine, threonine, phenylalanine, and glutamic acid were examined using SiO₂@Fc-CD-WE, it showed an enantioselective entry of amino acids into the cavity of β-cyclodextrin instead of Fc, resulting in the release of Fc with signal enhancement. For histidine, glutamic acid, and threonine, l-isomers showed a higher peak current response compared with d-isomers. The peak current ratios between l- and d-isomers were 2.88, 1.21, and 1.40, respectively. At the same time, the opposite phenomenon occurred for phenylalanine with a peak current ratio of 3.19 between d- and l-isomers. In summary, we are assured that the recognition strategy based on the supramolecular interaction can enlarge the detection range of chiral compounds by electrochemical analysis.

A selective electrochemical chiral interface based on a carboxymethyl-β-cyclodextrin/Pd@Au nanoparticles/3D reduced graphene oxide nanocomposite for tyrosine enantiomer recognition

Palladium@gold nanoparticle modified three-dimensional-reduced graphene oxide was coupled with carboxymethyl-β-cyclodextrin to form a novel nanocomposite, which served as an effective chiral sensing interface for electrochemical enantiorecognition.

Estimation of Enantiomeric Excess Based on Rapid Host–Guest Exchange

Chiral molecules possess enantiomers that have non-superimposable chemical structures but exhibit identical nuclear magnetic resonance (NMR) spectra. This feature prevents the use of NMR spectroscopic methods for the determination of enantiomeric excesses (ee) of chiral molecules, using simple mixtures of their enantiomers. Recently, however, it was reported that the addition of a symmetrical prochiral molecule (a reporter or host) into a solution of chiral analyte can lead to estimation of ee through interactions involving rapid exchange of the chiral analyte (guest) in the formed host–guest complex. This is due to the ee-dependent splitting of NMR resonances of the prochiral host molecule based on averaging the chemical shift non-equivalency caused by the presence of a chiral guest. The mechanism is not dependent on diastereomer formation, and 1:1 host–guest complexes can also show ee-dependent NMR peak splitting. Prochiral molecules capable of ee sensing using the NMR technique are now referred to as so-called prochiral solvating agents (pro-CSAs). pro-CSAs represent a family of reagents distinct from the commonly used NMR chiral derivatizing reagents (where chiral auxiliaries are used to derivatize enantiomers to diastereomers) or chiral solvating agents (where chiral auxiliaries interact in an asymmetric manner with analyte enantiomers). pro-CSA methods are unique since neither pro-CSA nor NMR contains chiral factors, making the technique neutral with respect to chirality. Here, we review our recent work on this matter involving several different nominally achiral receptor molecules whose unique guest binding properties and solution characteristics (especially with regard to NMR spectroscopy) allow for the estimation of ee in the corresponding chiral guests.

Strategies to Achieve a Ferrocene-Based Polymer with Reversible Redox Activity for Chiral Electroanalysis of Nonelectroactive Amino Acids

In the past, various chiral isomers accompanied by electroactive units have been distinguished using electrochemical techniques, which can produce electrochemical signals by themselves. However, it is still difficult to use an electrochemical technique to detect nonelectroactive samples. To address this bottleneck, an electroactive chiral polymer (S,S)-p-CVB-Fc that contains one redox-active ferrocene unit was designed and synthesized in this study. The electroactive polymer can give electrochemical signals as an alternative to the tested chiral samples, regardless of whether the isomers have electroactive units. Then, it was fixed on the surface of a glassy carbon electrode as an electrochemical chiral sensor. When nonelectroactive amino acids including proline, threonine, and alanine were examined by the sensor, clear discrimination in the response of peak current could be observed toward l- and d-isomers at pH 6.5. The peak current ratios (I_L/I_D) for proline and alanine were 1.47 and 1.48, respectively. In contrast, for threonine, the d-isomer exhibited a higher peak current than the l -isomer with a ratio of 2.59. In summary, the results ensure that the current work can enlarge the testing scope of chiral samples in the field of chiral electroanalysis using an electroactive sensor.

A biomolecule chiral interface base on BSA for electrochemical recognition of amine enantiomers

A composite chiral interface (BSA-MB-MWCNTs) was prepared from bovine serum albumin (BSA), methylene blue (MB), and multi-walled carbon nanotubes (MWCNTs) for chiral recognition of amine enantiomers (1S, 2S)-N,N'-dimethyl-1,2-cyclohexanediamine and (1R, 2R)-N,N'-dimethyl-1,2-cyclohexanediamine. The BSA-based composite was characterized by field emission scanning electron microscopy (FESEM) and ultraviolet-visible spectroscopy (UV-Vis). The electrochemical responses towards the two enantiomers were analyzed via cyclic voltammetry (CV), electrochemical AC impedance method (EIS), and differential-pulse voltammetry (DPV). The experimental results showed that the combination of MWCNTs and BSA could effectively improve the overall identification efficiency, and the peak current displayed by the S-enantiomer is larger, indicating that the prepared chiral surface has stronger interaction with the R-enantiomer. Under optimized condition, the current value of the oxidation peak of the chiral modified electrode showed a good linear relationship towards the amine concentration in the range of 5.0 × 10-3 to 5.0 × 10-5  mmol·L-1 . The proposed electrochemical chiral interface is easy to handle and provides a promising electrochemical sensing platform that can be used to identify chiral amine enantiomers.

Synthesis, structures and catalytic activity of some BINOL based boronates and boronium salts

The BINOL supported chiral boronate ester [C₁₀H₁₂O₂BC₆F₅(THF)] [(R)-1], [C₁₀H₁₂O₂BC₆F₅(O[double bond, length as m-dash]PEt₃)] [(R)-3] and [C₁₀H₁₂O₂BC₆F₅]₂ [(R,R)-2] as well as the chiral boronium salts [C₁₀H₁₂O₂B(O[double bond, length as m-dash]PEt₃)₂]⁺[B(O₂C₁₀H₁₂)₂]^-, [(R)-6] and [C₁₀H₁₂O₂B(O[double bond, length as m-dash]SMe₂)₂]⁺[B(O₂C₁₀H₁₂)₂]^- [(R)-7] have been synthesized, characterized by NMR spectroscopy, and the solid state structures of [(R)-1], [(R,R)-2] and [(R)-3] determined. Chiral ester [(R)-1] was found to be a potent Lewis acid, similar to B(C₆F₅)₃, and capable of rapidly catalyzing the annulation of (R)-, (S)- and rac-styrene oxide with nitrone PhCH[double bond, length as m-dash]N(O)Me to trans-2-methyl-3,6-diphenyl-1,4,2-dioxazine (trans-11) with high regio- and diastereoslectivities.

A MoN nanosheet array supported on carbon cloth as an efficient electrochemical sensor for nitrite detection

Nitrite, widely found in the environment and the food industry, poses a great threat to human health because of its potential toxicity, and its detection is highly important. We report that a MoN nanosheet array on carbon cloth (MoN NA/CC) behaves as an efficient catalyst for nitrite reduction in neutral solution. As a nitrite sensor, this MoN NA/CC offers a wide linear range from 1 μM to 5 mM and a low detection limit of 3 nM (S/N = 3), with a high sensitivity of 4319 μA mM^-1 cm^-2 and long-term stability and reproducibility.

Visual and Colorimetric High-Throughput Analysis of Chiral Carboxylic Acids Based on Enantioselective Charge Shielding of Gold Nanoparticles

Because chiral carboxylic acids (CCAs) are a class of important biological molecules and common functional moieties found in pharmaceutical molecules, the chiral analysis of CCAs has received much attention. Herein, we developed a simple, rapid, and cost-effective method for visual and colorimetric high-throughput analysis of CCAs using chiral di-imine structure-modified gold nanoparticles (C-AuNPs) as the probe. The C-AuNPs are positively charged in the presence of zinc ion, and they can be enantioselectively shielded by the negatively charged CCA enantiomers. Therefore, upon the addition of different concentrations and enantiomeric excess (ee) of CCAs, the C-AuNP-based sensor shows the different levels of aggregation along with the visual changes in solution color, which can achieve simultaneous analysis of the concentration and ee of CCAs. The chiral recognition mechanism based on C-AuNPs was investigated by the determination of binding constants ( K) and molecular simulation methods. Our approach is expected to have the wide-ranging applications in the developing region for enantio-sensing of various chiral drugs and biomolecules.

The Bull-James assembly as a chiral auxiliary and shift reagent in kinetic resolution of alkyne amines by the CuAAC reaction

The Bull-James boronic acid assembly is used simultaneously as a chiral auxiliary for kinetic resolution and as a chiral shift reagent for in situ enantiomeric excess (ee) determination by ¹H NMR spectroscopy. Chiral terminal alkyne-containing amines, and their corresponding chiral triazoles formed via CuAAC, were probed in situ. Selectivity factors of up to s = 4 were imparted and measured, accurate to within ±3% when compared to chiral GC.

MnO2 nanoarrays: an efficient catalyst electrode for nitrite electroreduction toward sensing and NH3 synthesis applications

A MnO₂ nanoarray on titanium mesh (MnO₂ NA/TM) is shown to be an efficient catalyst electrode for the electroreduction of nitrite.

Highly efficient electrochemical recognition and quantification of amine enantiomers based on a guest-free homochiral MOF

A novel homochiral MOF was facilely synthesized, its nanocrystals exhibit rapid discrimination of α-methylbenzylamine enantiomers and quantitative determination of enantiomeric excess.

Chiroptical Asymmetric Reaction Screening via Multicomponent Self-Assembly

Self-assembly of a stereodynamic phosphine ligand, Pd(II), and a chiral amine, amino alcohol, or amino acid generates characteristic UV and CD signals that can be used for quantitative stereochemical analysis of the bound substrate. A robust mix-and-measure chiroptical sensing protocol has been developed and used to determine the absolute configuration, ee, and yield of an amine produced by Ir-catalyzed asymmetric hydrogenation of an iminium salt. The analysis requires only 1 mg of the crude reaction mixture and minimizes cost, labor, time, and waste.

A colour-tunable chiral AIEgen: reversible coordination, enantiomer discrimination and morphology visualization

We present a conceptually new approach to synthesise a boron-containing Aggregation-Induced Emissive Luminogen (AIEgen) with a chiral chromophore. An intramolecular N-B coordinating bond results in a low-energy transition that renders the material red-emissive in a solid state. By competitive binding of nucleophiles to the boron atom, this bond is replaced in favour of an intermolecular coordinating bond, which results in a tremendous blue-shift in both the absorption and emission. A supportive DFT computation elucidates that a breakage of the intramolecular N-B coordinating bond causes a tremendous loss of conjugation in the LUMO, resulting in a larger energy gap. Owing to the fact that our scaffold is intrinsically chiral and Lewis-acidic, we demonstrate how our AIEgen discriminates between two pairs of enantiomers in a simple UV-vis measurement. Furthermore, the binding capabilities are exploited to stain polymer blends that comprised a non-coordinating and a Lewis-basic polymer. The red fluorescence that originates only from domains of the non-coordinating polymer is conveniently detected by a fluorescence microscope. Thus, compared to current analytical methods, we present a cheaper and faster methodology to study the micro-morphologies of certain polymer blends.

Self and directed assembly: people and molecules

Self-assembly and directed-assembly are two very important aspects of supramolecular chemistry. As a young postgraduate student working in Canada with Tom Fyles my introduction to Supramolecular Chemistry was through the self-assembly of phospholipid membranes to form vesicles for which we were developing unimolecular and self-assembling transporter molecules. The next stage of my development as a scientist was in Japan with Seiji Shinkai where in a “Eureka” moment, the boronic acid templating unit (directed-assembly) of Wulff was combined with photoinduced electron transfer systems pioneered by De Silva. The result was a turn-on fluorescence sensor for saccharides; this simple result has continued to fuel my research to the present day. Throughout my career as well as assembling molecules, I have enjoyed bringing together researchers in order to develop collaborative networks. This is where molecules meet people resulting in assemblies worth more than the individual “molecule” or “researcher”. My role in developing networks with Japan was rewarded by the award of a Daiwa-Adrian Prize in 2013 and I was recently rewarded for developing networks with China with an Inaugural CASE Prize in 2015.

Enhancing the enantioselective recognition and sensing of chiral anions by halogen bonding

Novel halogen bonding chiral (S)-1,1′-bi-2-naphthol-based receptor molecules significantly enhance enantioselective anion recognition and electrochemical sensing compared to their hydrogen bonding analogues.

Boronic acid and boronic ester containing polyoxometalates

Three organoboron functionalized polyoxometalates have been synthesized using Schiff base chemistry including a boronic acid, its methyl ester and its trimethylene glycol ester.

Determination of enantiomeric excess in amine derivatives with molecular self-assemblies

We report the first fluorescence-based assay for the rapid determination of the ee value of amines, amino alcohols, and amino acid esters. The method uses the self-assembly of 2-formylphenylboronic acid with a chiral diol and a chiral amine or derivatives (of unknown chirality) to produce two diastereomeric iminoboronates that differ in their fluorescence intensity and polarization. The approach allows for the accurate determination of the ee value of chiral amines with errors of just 1-2%. We believe that this application of orthogonal dynamic covalent self-assembly in the determination of the enantioselectivity will lead to the development of high-throughput procedures for the determination of chirality.

Electrochemical sensing using boronic acids

Boronic acids can bind with 1,2- or 1,3-diols to form five or six-membered cyclic complexes and also can interact with Lewis bases to generate boronate anions, making them suitable for the electrochemical sensing of these species

The effect of central and planar chirality on the electrochemical and chiral sensing properties of ferrocenyl urea H-bonding receptors

Ferrocenyl urea receptors containing planar and central chirality electrochemically sense carboxylate anions via formation of H-bonded complexes.

Hierarchical supramolecules and organization using boronic acid building blocks

Current progress on hierarchical supramolecules using boronic acids has been highlighted in this feature article. The feasibility of the structure-directing ability is fully discussed from the standpoint of the generation of new smart materials.

Reagentless polyol detection by conductivity increase in the course of self-doping of boronate-substituted polyaniline

We report on the novel reagentless and label-free detection principle based on electroactive (conducting) polymers considering sensors for polyols, particularly, saccharides and hydroxy acids. Unlike the majority of impedimetric and conductometric (bio)sensors, which specific and unspecific signals are directed in the same way (resistance increase), making doubtful their real applications, the response of the reported system results in resistance decrease, which is directed oppositely to the background. The mechanism of the resistance decrease is the polyaniline self-doping, i.e., as an alternative to proton doping, an appearance of the negatively charged aromatic ring substituents in polymer chain. Negative charge "freezing" at the boron atom is indeed a result of complex formation with di- and polyols, specific binding. Changes in Raman spectra of boronate-substituted polyaniline after addition of glucose are similar to those caused by proton doping of the polymer. Thermodynamic data on interaction of the electropolymerized 3-aminophenylboronic acid with saccharides and hydroxy acids also confirm that the observed resistance decrease is due to polymer interaction with polyols. The first reported conductivity increase as a specific signal opens new horizons for reagentless affinity sensors, allowing the discrimination of specific affinity bindings from nonspecific interactions.

Electrochemical biosensors based on ferroceneboronic Acid and its derivatives: a review

We review recent progress in the development of electrochemical biosensors based on ferroceneboronic acid (FcBA) and ferrocene (Fc)-modified boronic acids. These compounds can be used to construct electrochemical biosensors because they consist of a binding site (i.e., a boronic acid moiety) and an electrochemically active part (i.e., an Fc residue). By taking advantage of the unique properties of FcBA and its derivatives, electrochemical sensors sensitive to sugars, glycated hemoglobin (HbA1c), fluoride (F(-)) ions, and so forth have been widely studied. FcBA-based sugar sensors rely on the selective binding of FcBA to 1,2- or 1,3-diol residues of sugars through the formation of cyclic boronate ester bonds. The redox properties of FcBA-sugar adduct differ from those of free FcBA, which forms the basis of the electrochemical determination of sugars. Thus, non-enzymatic glucose sensors are now being actively studied using FcBA and Fc-modified boronic acids as redox markers. Using a similar principle, HbA1c can be detected by FcBA-based electrochemical systems because it contains hydrocarbon chains on the polypeptide chain. HbA1c sensors are useful for monitoring blood glucose levels over the preceding 8-12 weeks. In addition, FcBA and Fc-modified boronic acids have been used for the detection of F(-) ions due to the selective binding of boronic acid to F(-) ions. F(-)-ion sensors may be useful alternatives to conventional ion-selective electrodes sensitive to F(-) ion. Furthermore, FcBA derivatives have been studied to construct lectin; steroids; nucleotides; salicylic acid; and bacteria sensors. One of the limitations of FcBA-based sensors comes from the fact that FcBA derivatives are added in sample solutions as reagents. FcBA derivatives should be immobilized on the surface of electrodes for developing reagentless sensors.

Calixarene-based chemosensors by means of click chemistry

Click chemistry, a new strategy for organic chemistry, has been widely used in the chemical modification of calixarenes because of its reliability, specificity, biocompatibility, and efficiency. Click-derived triazoles also play a critical role in sensing ions and molecules. This in-depth review provides an overview of calixarene-based chemosensors that incorporate click-derived triazoles, and their three characteristics (chromogenic, fluorescence, and wettability) are reviewed.

Ferrocene-modified carbon nitride for direct oxidation of benzene to phenol with visible light

Ferrocene moieties were heterogenized onto carbon nitride polymers by a covalent -C=N- linkage bridging the two conjugation systems, enabling the merging of the redox function of ferrocene with carbon nitride photocatalysis to construct a heterogeneous Photo-Fenton system for green organocatalysis at neutral conditions. The synergistic donor-acceptor interaction between the carbon nitride matrix and ferrocene group, improved exciton splitting, and coupled photocatalytic performance allowed the direct synthesis of phenol from benzene in the presence of H2 O2 under visible light irradiation. This innovative modification method will offer an avenue to construct functionalized two-dimensional polymers useful also for other green synthesis processes using solar irradiation.

Fine-tuning of ferrocene redox potentials towards multiplex DNA detection

Rational tuning of ferrocene redox potential is achieved by modulation of the hydrophobicity and correlated to c log P.

Chirality sensing of amines, diamines, amino acids, amino alcohols, and α-hydroxy acids with a single probe

A stereodynamic probe for determination of the absolute configuration and enantiomeric composition of chiral amines, diamines, amino alcohols, amino acids, and α-hydroxy carboxylic acids is described. The chirality sensing is based on spontaneous asymmetric transformation of the first kind with stereolabile binaphtholate boron and zinc complexes. The substrate binding and chiral amplification processes yield a distinctive chiroptical sensor output at high wavelength that can be used for rapid and accurate ee detection of minute sample amounts.