New Light-Harvesting Molecular Systems Constructed with a Ru(II) Complex and a Linear-Shaped Re(I) Oligomer

Unusual Effects of the Metal Center Coordination Mode on the Photophysical Behavior of the Rhenium(I) and Rhenium(I)-Iridium(III) Complexes

Binuclear transition-metal complexes based on conjugated systems containing coordinating functions are potentially suitable for a wide range of applications, including light-emitting materials, sensors, light-harvesting systems, photocatalysts, etc., due to energy-transfer processes between chromophore centers. Herein we report on the synthesis, characterization, photophysical, and theoretical studies of relatively rare rhenium(I) and rhenium(I)-iridium(III) dyads prepared by using the nonsymmetrical polytopic ligands (NN2 and NN3) with the strongly conjugated phenanthroline and imidazole-quinoline/pyridine coordinating fragments. Availability of these different diimine chelating functions and targeted synthetic procedures allowed one to obtain a series of mononuclear (Re and Ir) and binuclear (Re-Re and Re-Ir) metal complexes with various modes of {Re(CO)3Cl} and {Ir(NC)2} metal fragment coordination. The obtained compounds were characterized by 1D 1H and 2D (COSY and NOESY) NMR spectroscopy, mass spectrometry, elemental analysis, and X-ray diffraction crystallography. The photophysical study of the complexes (absorption, excitation and emission spectra, quantum yields, and excited-state lifetimes) showed that their emission parameters display strong dependence on the manner of metal center coordination to the diimine bidentate functions. The mononuclear complexes with an unoccupied imidazole-quinoline/pyridine fragment [Re(NN2), Re(NN3), and Ir(NC2)2(NN2)] or those containing a coordinated {Ir(NC)2} fragment in this position [Ir(NC2)2(NN1) and Re(NN2)Ir(NC1)2-Re(NN2)Ir(NC4)2] exhibit moderate-to-intense phosphorescence (quantum yields vary from 3% to 56% in a degassed solution), whereas the complexes containing a {Re(CO)3Cl} moiety in the imidazole-quinoline/pyridine position [Re2(NN2), Re2(NN3), and Ir(NC2)2(NN2)Re] demonstrate a strong reduction in the phosphorescence efficiency with a quantum yield of ≪0.1%. Quenching of the phosphorescence in the latter types of emitters is discussed in terms of a strong decrease in the radiative rate constants for these complexes compared to their analogues mentioned above, while the nonradiative constants remain nearly unchanged. Theoretical density functional theory (DFT) and time-dependent DFT (TD DFT) calculations, including evaluation of the radiative rate constants for the couple of structurally analogous complexes with and without a {Re(CO)3Cl} moiety coordinated to the imidazole-quinoline/pyridine chelating function, confirmed the observed trend in the variation of the emission intensity.

Enantiomeric Complexes Based on Ruthenium(III) and 2,2'-Biimidazole: X-ray Structure and Magnetic Properties

We have prepared and characterized two Ru(III) compounds based on the 2,2'-biimidazole (H2biim) ligand, namely, a single complex of formula cis-[RuCl2(H2biim)2]Cl·4H2O (1) and a racemic mixture of formula {cis-[RuCl2(H2biim)2]Cl}2·4H2O (2), which contains 50% of Ru(III) complex 1. Both compounds crystallize in the monoclinic system with space groups C2 and P21 for 1 and 2, respectively. These complexes exhibit the metal ion bonded to four nitrogen atoms from two H2biim molecules and two chloride ions, which balance part of the positive charges in a distorted octahedral geometry. Significant differences are observed in their crystal packing, which leads to the observation of differences in their respective magnetic behaviors. Despite having imidazole rings in both compounds, π-π stacking interactions occur only in the crystal structure of 2, and the shortest intermolecular Ru···Ru separation in 2 is consequently shorter than that in 1. Variable-temperature dc magnetic susceptibility measurements performed on polycrystalline samples of 1 and 2 reveal different magnetic behaviors at low temperatures: while 1 behaves pretty much as a magnetically isolated mononuclear Ru(III) complex with S = 1/2, 2 exhibits the behavior of an antiferromagnetically coupled system with S = 0 and a maximum in the magnetic susceptibility curve at approximately 3.0 K.

Determining Excited-State Structures and Photophysical Properties in Phenylphosphine Rhenium(I) Diimine Biscarbonyl Complexes Using Time-Resolved Infrared and X-ray Absorption Spectroscopies

We have explored the structural factors on the photophysical properties in two rhenium(I) diimine complexes in acetonitrile solution, cis,trans-[Re(dmb)(CO)₂(PPh₂Et)₂]⁺ (Et(2,2)) and cis,trans-[Re(dmb)(CO)₂(PPh₃)₂]⁺ ((3,3)) (dmb = 4,4'-dimethyl-2,2'-bipyridine, Ph = phenyl, Et = ethyl) using the combination method of time-resolved infrared spectroscopy, time-resolved extended X-ray absorption fine structure, and quantum chemical calculations. The difference between these complexes is the number of phenyl groups in the phosphine ligand, and this only indirectly affects the central Re(I). Despite this minor difference, the complexes exhibit large differences in emission wavelength and excited-state lifetime. Upon photoexcitation, the bond length of Re-P and angle of P-Re-P are significantly changed in both complexes, while the phenyl groups are largely rotated by ∼20° only in (3,3). In contrast, there is little change in charge distribution on the phenyl groups when Re to dmb charge transfer occurs upon photoexcitation. We concluded that the instability from steric effects of phenyl groups and diimine leads to a smaller Stokes shift of the lowest excited triplet state (T₁) in (3,3). The large structural change between the ground and excited states causes the longer lifetime of T₁ in (3,3).

Synthesis and Light-Harvesting Functions of Ring-Shaped Re(I) Trinuclear Complexes Connected with an Emissive Ru(II) Complex

Ring-shaped Re(I) multinuclear complexes (Re(I) rings) in which Re(I)-diimine-biscarbonyl complexes are connected to each other through bisphosphine bridging ligands exhibit very suitable photophysical and electrochemical properties as redox photosensitizers. We developed two approaches for synthesizing Re(I) rings connected with a Ru(II) complex: cyclization of a linear Re(I) trinuclear complex connected with a Ru(II) complex and Mizoroki-Heck coupling of a ring-shaped Re(I) trinuclear complex and a Ru(II) complex. Photophysical measurements of these heteromultinuclear complexes and comparisons with their model complexes indicated that they exhibit efficient light-harvesting abilities, where energy transfer from the excited ring-shaped Re(I) trinuclear complex unit to the Ru(II) complex unit proceeds efficiently.

Aerobically stable and substitutionally labile α-diimine rhenium dicarbonyl complexes

New synthetic routes to aerobically stable and substitutionally labile α-diimine rhenium(i) dicarbonyl complexes are described. The molecules are prepared in high yield from the cis–cis–trans-[Re(CO)₂(^tBu₂bpy)Br₂]⁻ anion (2, where ^tBu₂bpy is 4,4′-di-tert-butyl-2,2′-bipyridine), which can be isolated from the one electron reduction of the corresponding 17-electron complex (1). Compound 2 is stable in the solid state, but in solution it is oxidized by molecular oxygen back to 1. Replacement of a single bromide of 2 by σ-donor monodentate ligands (Ls) yields stable neutral 18-electron cis–cis–trans-[Re(CO)₂(^tBu₂bpy)Br(L)] species. In coordinating solvents like methanol the halide is replaced giving the corresponding solvated cations. [Re(CO)₂(^tBu₂bpy)Br(L)] species can be further reacted with Ls to prepare stable cis–cis–trans-[Re(CO)₂(^tBu₂bpy)(L)₂]⁺ complexes in good yield. Ligand substitution of Re(i) complexes proceeds via pentacoordinate intermediates capable of Berry pseudorotation. In addition to the cis–cis–trans-complexes, cis–cis–cis- (all cis) isomers are also formed. In particular, cis–cis–trans-[Re(CO)₂(^tBu₂bpy)(L)₂]⁺ complexes establish an equilibrium with all cis isomers in solution. The solid state crystal structure of nearly all molecules presented could be elucidated. The molecules adopt a slightly distorted octahedral geometry. In comparison to similar fac-[Re(CO)₃]⁺complexes, Re(i) diacarbonyl species are characterized by a bend (ca. 7°) of the axial ligands towards the α-diimine unit. [Re(CO)₂(^tBu₂bpy)Br₂]⁻ and [Re(CO)₂(^tBu₂bpy)Br(L)] complexes may be considered as synthons for the preparation of a variety of new stable diamagnetic dicarbonyl rhenium cis-[Re(CO)₂]⁺ complexes, offering a convenient entry in the chemistry of the core.

New synthetic routes to aerobically stable and substitutionally labile α-diimine rhenium(i) dicarbonyl complexes offer a convenient entry in the chemistry of the cis-[Re(CO)₂]⁺ core.

Targeted Synthesis of NIR Luminescent Rhenium Diimine cis,trans-[Re( N N )(CO)2 (L)2 ]n+ Complexes Containing N-Donor Axial Ligands: Photophysical, Electrochemical, and Theoretical Studies

The combined action of ultraviolet irradiation and microwave heating onto acetonitrile solution of [Re( N N )(CO)₃ (NCMe)]OTf ( N N =phenantroline and neocuproine) afforded cis,trans-Re( N N )(CO)₂ (NCMe)₂ ]⁺ acetonitrile derivatives. Substitution of relatively labile NCMe with a series of aromatic N-donor ligands (pyridine, pyrazine, 4,4'-bipyridine, N-methyl-4,4'-bipyridine) gave a novel family of the diimine cis,trans-[Re( N N )(CO)₂ (L)₂ ]⁺ complexes. Photophysical studies of the obtained compounds in solution revealed unusually high absorption across the visible region and NIR phosphorescence with emission band maxima ranging from 711 to 805 nm. The nature of emissive excited states was studied using DFT calculations to show dominant contribution of ³ MLCT (dπ(Re)→π*( N N )) character. Electrochemical (CV and DPV) studies of the monocationic diimine complexes revealed one reduction and one oxidation wave assigned to reduction of the diimine moiety and oxidation of the rhenium center, respectively.

Wave-Function Symmetry Control of Electron-Transfer Pathways within a Charge-Transfer Chromophore

Despite a diverse manifold of excited states available, it is generally accepted that the photoinduced reactivity of charge-transfer chromophores involves only the lowest-energy excited state. Shining a visible-light laser pulse on an aqueous solution of the chromophore-quencher [Ru(tpy)(bpy)(μNC)Os^III(CN)₅]^- assembly (tpy = 2,2';6,2''-terpyridine and bpy = 2,2'-bipyridine), we prepared a mixture of two charge-transfer excited states with different wave-function symmetry. We were able to follow, in real time, how these states undergo separate electron-transfer reaction pathways. As a consequence, their lifetimes differ in 3 orders of magnitude. Implicit are energy barriers high enough to prevent internal conversion within early excited-state populations, shaping isolated electron-transfer channels in the excited-state potential energy surface. This is relevant not only for supramolecular donor/acceptor chemistry with restricted donor/acceptor relative orientations. These energy barriers provide a means to avoid chemical potential dissipation upon light absorption in any molecular energy conversion scheme, and our observations invite to explore wave-function symmetry-based strategies to engineer these barriers.

A Hole Delocalization Strategy: Photoinduced Mixed-Valence MLCT States Featuring Extended Lifetimes

Bimetallic trans-[Ru^II(tpm)(bpy)(μNC)Ru^II(L)₄(CN)]²⁺, where bpy is 2,2'-bipyridine, tpm is tris(1-pyrazolyl)methane and L = 4-methoxypyridine (MeOpy) or pyridine (py), was examined using ultrafast vis-NIR transient absorption spectroscopy. Of great relevance are the longest-lived excited states in the form of strongly coupled photoinduced mixed-valence systems, which exhibit intense photoinduced absorptions in the NIR and are freely tunable by the judicious choice of the coordination spheres of the metallic ions. Using the latter strategy, we succeeded in tailoring the excited state lifetimes of bimetallic complexes and, in turn, achieving significantly longer values relative to related monometallic complexes. Notable is the success in extending the lifetimes, when considering the higher density of vibrational states, as they are expected to facilitate nonradiative ground-state recovery.

Synthesis of Re(I) Rings Comprising Different Re(I) Units and Their Light-Harvesting Abilities

Trimethylamine N-oxide (Me₃NO) could selectively remove only one CO ligand from fac-[Re(N^N)(CO)₃(PR₂R')]⁺ (N^N = diimine ligand), whereby only the CO ligand in the trans position to the phosphorus ligand was selectively removed to give cis,trans-[Re^I(N^N)(CO)₂(PR₂R')(L)] ⁿ⁺ in good yields. This decarbonylation reaction using Me₃NO was found to be especially useful for synthesizing biscarbonyl Re(I) complexes with electron-withdrawing groups in the diimine ligand, which could not be synthesized or were obtained only in low yields by the photochemical method. Me₃NO also selectively removed the carbonyl ligands in the trans position to the phosphorus ligands from the edge Re(I) complex units, which have the fac-[Re(N^N)(CO)₃(PR₂R')]⁺ structure, in linear-shaped Re(I) multinuclear complexes. This reaction was successfully applied to synthesize a novel precursor with ring-shaped multinuclear Re complexes (Re-rings) comprising different kinds of Re(I) units. The newly synthesized Re-rings, which consist of one Re unit with a 4,4'-bis(trifluoromethyl)-2,2'-bipyridine (CF₃bpy) ligand and one or two Re unit(s) with a 2,2'-bipyridine (bpy) ligand, showed almost quantitative excitation-energy harvesting ability from the Re unit(s) with bpy to that with CF₃bpy.

Phosphine oxide-based tricarbonylrhenium(i) complexes from phosphine/phosphine oxide and dihydroxybenzoquinones

Neutral phosphine oxide (P[double bond, length as m-dash]O) donor-based organometallic complexes [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-DHBQ}{Re(CO)3O[double bond, length as m-dash]PCy3}] (1), [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-DHBQ}{Re(CO)3O[double bond, length as m-dash]PPh3}] (2), [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-THQ}{Re(CO)3O[double bond, length as m-dash]PCy3}] (3), [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-THQ}{Re(CO)3O[double bond, length as m-dash]PPh3}] (4), [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-CA}{Re(CO)3O[double bond, length as m-dash]PCy3}] (5), and [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-CA}{Re(CO)3O[double bond, length as m-dash]PPh3}] (6) were assembled from phosphine/phosphine oxide, a dihydroxybenzoquinone donor and Re2(CO)10via a one-pot solvothermal approach. The soft phosphine donor was transformed into a hard phosphine oxide donor during the formation of 1, 3, 4, 5, and 6. The complexes 1-6 were air and moisture stable and were soluble in polar organic solvents. The complexes were characterized by elemental analysis, FT-IR, and NMR spectroscopic methods. The molecular structures of 1, 2, 4, and 6 were analyzed by single-crystal X-ray diffraction analysis. The UV-Visible absorption studies indicated that 1-6 in THF display strong visible light absorption in the range of ∼350-700 nm.

Electronic Energy Transduction from {Ru(py)4} Chromophores to Cr(III) Luminophores

Despite the large body of work on {Ru(bpy)₂} sensitizer fragments, the same attention has not been devoted to their {Ru(py)₄} analogues. In this context, we explored the donor-acceptor trans-[Ru(L)₄{(μ-NC)Cr(CN)₅}₂]^4-, where L = pyridine, 4-methoxypyridine, 4-dimethylaminopyridine. We report on the synthesis and the crystal structure as well as the electrochemical, spectroscopical, and photophysical properties of these trimetallic complexes, including transient absorption measurements. We observed emission from chromium-centered d-d states upon illuminating into either MLCT or MM'CT absorptions of {Ru(L)₄} or {Ru-Cr}, respectively. The underlying energy transfer is as fast as 600 fs with quantum efficiencies ranging from 10% to 100%. These results document that {Ru(py)₄} sensitizer fragments are as efficient as {Ru(bpy)₂} in short-range energy transfer scenarios.

Synthesis of Os(ii)-Re(i)-Ru(ii) hetero-trinuclear complexes and their photophysical properties and photocatalytic abilities

Novel Os(ii)–Re(i)–Ru(ii) hetero-trinuclear complexes, which can absorb a wide range of visible light and induce durable CO₂ reduction, were synthesised.

Photofunctional trinuclear complexes containing three different central metals, i.e. Os(ii), Re(i) and Ru(ii), were synthesised for the first time using stepwise Mizoroki–Heck reactions. The vinylene groups in the bridging ligands of the Os(ii)–Re(i)–Ru(ii) trinuclear complexes were selectively reduced by photochemical hydrogenation in moderate yield, affording novel supramolecular photocatalysts which can absorb a wide range of visible light up to 730 nm and induce CO₂ reduction with high selectivity and durability. The turnover numbers of CO formation were over 4300. Details of the photophysical properties of these new trinuclear complexes, especially their intramolecular excitation-energy transfer phenomena, are also reported.

Modulation of the Photophysical, Photochemical, and Electrochemical Properties of Re(I) Diimine Complexes by Interligand Interactions

The photophysical and photochemical properties of transition metal complexes have attracted considerable attention because of their recent applications as photocatalysts in artificial photosynthesis and organic synthesis, as light emitters in electroluminescent (EL) devices, and as dyes in solar cells. The general control methods cannot be always used to obtain transition metal complexes with photochemical properties that are suitable for the above-mentioned applications. In the fields of solar energy conversion, strong metal-to-ligand charge-transfer (MLCT) absorption of redox photosensitizers and/or photocatalysts in the visible region with long wavelength is essential. However, the usual methods, i.e., introduction of electron-withdrawing groups into the electron-accepting ligand and/or weak-field ligands into the central metal, have several drawbacks, including shorter excited-state lifetime, lower emission efficiency, and lower oxidation and reduction power. Herein we describe a new method to control the photophysical, photochemical, and electrochemical properties of Re(I) diimine carbonyl complexes that have been widely used in various fields such as photocatalysts for CO₂ reduction and emitters in EL devices and sensors. This method involves the introduction of interligand interactions (π-π and CH-π interactions) into the Re(I) complexes; the aromatic diimine ligand coordinating to the Re center approaches the aryl groups on the phosphine ligand or ligands at the cis position, which "compulsorily" induces a weak interaction between these aromatic groups. As a result of this interligand interaction, the Re complexes with the aromatic diimine ligand and the arylphosphine ligand(s) exhibit red-shifted ¹MLCT absorption but afford blue-shifted emission from the triplet metal-to-ligand charge-transfer (³MLCT) excited state. This increases the oxidation power and lifetime of the ³MLCT excited state. These unique property changes are favorable, particularly for redox photosensitizers. The interligand interaction is strongly expressed by the ring-shaped multinuclear Re(I) complexes (Re-rings). In the case of Re-rings with high steric hindrance due to a small inner cavity, the lifetime of the ³MLCT excited state is up to 8 μs and the emission quantum yield is up to 70%. These properties cannot be obtained by the corresponding mononuclear Re(I) complexes, which generally exhibit shorter lifetimes (<1 μs) and lower emission quantum yields (<10%). Some of the Re-rings could be successfully applied as efficient photosensitizers in photocatalytic systems for CO₂ reduction; the highest quantum yields for CO₂ reduction were achieved by using photocatalytic systems composed of Re-rings as the photosensitizers and Re(I) (82%), Ru(II) (58%), and Mn(I) (48%) complexes as catalysts. This interligand interaction potentially provides unique and useful methods for controlling the photophysical, photochemical, and electrochemical functions of various metal complexes, paving the way to create new functions for metal complexes.

Linking ReI and PtII Chromophores with Aminopyridines: A Simple Route to Achieve a Complicated Photophysical Behavior

The bifunctional aminopyridine ligands H₂ N-(CH₂ )_n -4-C₅ H₄ N (n=0, L1; 1, L2; 2, L3) have been utilized for the preparation of the rhenium complexes [Re(phen)(CO)₃ (L1-L3)]⁺ (1-3; phen=phenanthroline). Complexes 2 and 3 with NH₂ -coordinated L2 and L3, respectively, were coupled with cycloplatinated motifs {Pt(ppy)Cl} and {Pt(dpyb)}⁺ (ppy=2-phenylpyridine, dpyb=dipyridylbenzene) to give the bimetallic species [Re(phen)(CO)₃ (μ-L2/L3)Pt(ppy)Cl]⁺ (4, 6) and [Re(phen)(CO)₃ (μ-L2/L3)Pt(dpyb)]²⁺ (5, 7). In solution, complexes 4 and 6 show ³ MLCT {Re}-based emission at 298 K, which changes to the ³ IL(ppy) state at 77 K. The photophysical properties of compounds 5 and 7 display a pronounced concentration dependence, presumably due to the formation of bimolecular aggregates. Analysis of the spectroscopic data, combined with TD-DFT simulations, suggest that unconventional heteroleptic {Re(phen)}⋅⋅⋅{Pt(dpyb)} π-π stacking operates as the driving force for ground-state association. The latter, together with intra- and intermolecular energy-transfer processes, determines the appearance of multiple emission bands and results in nonlinear relaxation kinetics of the excited states.

Photochemical Processes in a Rhenium(I) Tricarbonyl N-Heterocyclic Carbene Complex Studied by Time-Resolved Measurements

We carried out time-resolved infrared (TR-IR) and emission lifetime measurements on a Re(I) carbonyl complex having an N-heterocyclic carbene ligand, namely, fac-[Re(CO)₃(PyImPh)Br], under photochemically reactive (in solution in acetonitrile) and nonreactive (in solution in dichloromethane) conditions to investigate the mechanism of photochemical ligand substitution reactions. The TR-IR measurements revealed that no reaction occurs on a picosecond time scale and the cationic product, namely, fac-[Re(CO)₃(PyImPh)(MeCN)]⁺, is produced on a nanosecond time scale only in solution in acetonitrile, which indicates that the reaction proceeds thermally from the excited state. Because no other products were observed by TR-IR, we concluded that this cationic product is an intermediate species for further reactions. The measurements of the temperature-dependent emission lifetime and analysis using transition-state theory revealed that the photochemical substitution reaction proceeds from a metal-to-ligand charge transfer excited state, the structure of which allows the potential coordination of a solvent molecule. Thus, the coordinating capacity of the solvent determines whether the reaction proceeds or not. This mechanism is different from those of photochemical reactions of other types of Re(I) carbonyl complexes owing to the unique characteristics of the carbene ligand.

Photofunctional multinuclear rhenium(i) diimine carbonyl complexes

In this review, we summarize the synthesis, photophysical properties and applications of a wide variety of multinuclear complexes consisting of Re(i)-diimine-carbonyl units.

pH luminescence switching, dihydrogen phosphate sensing, and cellular uptake of a heterobimetallic ruthenium(II)-rhenium(I) complex

A new heterobimetallic ruthenium(II)-rhenium(I) complex of [Ru(bpy)2(HL)Re(CO)3Cl](ClO4)2·6H2O (RuHLRe) {bpy = 2,2'-bipyridine and HL = 2-(4-(2,6-di(pyridin-2-yl)pyridin-4-yl)phenyl)-1H-imidazo[4,5-f][1,10]phenanthroline} was synthesised and characterised by elemental analysis, proton nuclear magnetic resonance spectroscopy, and mass spectrometry. The ground- and excited-state acid-base properties of RuHLRe were studied using UV-Vis absorption spectrophotometric and spectrofluorimetric titrations in a 100 : 1 (v/v) Britton-Robinson buffer-CH3CN solution combined with luminescence lifetime measurements. The complex exhibited two-step separate protonation-deprotonation processes in both the ground and excited states. The complex acted as pH-induced "off-on-off" luminescence switches (I(on)/I(off) = 31.0 and 14.6), with one of the switching actions being driven by pH variations over the physiological pH range (5.3-8.0). Importantly, cellular imaging and cytotoxicity experiments demonstrated that RuHLRe rapidly and selectively illuminated the membrane of HeLa cells over fixed cells and exhibited reduced cytotoxicity at the imaging concentration compared to the Re(I)-free parent Ru(II) complex. In addition, RuHLRe acted as an efficient "turn on" emission sensor for H2PO4(-) and "turn off" emission sensor for F(-) and OAc(-).

Dinuclear pyridine-4-thiolate-bridged rhodium and iridium complexes as ditopic building blocks in molecular architecture

A series of dinuclear pyridine-4-thiolate (4-Spy)-bridged rhodium and iridium compounds [M(μ-4-Spy)(diolef)]2 [diolef = 1,5-cyclooctadiene (cod), M = Rh (1), Ir (2); diolef = 2,5-norbornadiene (nbd), M = Rh (3)] were prepared by the reaction of Li(4-Spy) with the appropriate compound [M(μ-Cl)(diolef)]2 (M = Rh, Ir). The dinuclear compound [Rh(μ-4-Spy)(CO)(PPh3)]2 (4) was obtained by the reaction of [Rh(acac)(CO)(PPh3)] (acac = acetylacetonate) with 4-pySH. Compounds 1-4 were assessed as metalloligands in self-assembly reactions with the cis-blocked acceptors [M(cod)(NCCH3)2](BF4) [M = Rh (a), Ir (b)] and [M(H2O)2(dppp)](OTf)2 [M = Pd (c), Pt (d); dppp = 1,3-bis(diphenylphosphino)propane]. The homometallic hexanuclear metallomacrocycles [{M2(μ-4-Spy)2(cod)2}2{M(cod)}2](BF4)2 (M = Rh [(1a)2], Ir [(2b)2]) and the heterometallic hexanuclear metallomacrocycles [{Rh2(μ-4-Spy)2(cod)2}2{Ir(cod)}2](BF4)2 [(1b)2], [{Rh2(μ-4-Spy)2(cod)2}2{M'(dppp)}2](OTf)4 (M' = Pd [(1c)2], Pt [(1d)2]), and [{Ir2(μ-4-Spy)2(cod)2}2{M'(dppp)}2](OTf)4 (M' = Pd [(2c)2], Pt [(2d)2]) were obtained. NMR spectroscopy in combination with electrospray ionization mass spectrometry was used to elucidate the nature of the metalloligands and their respective supramolecular assemblies. Most of the synthesized species were found to be nonrigid in solution, and their fluxional behavior was studied by variable-temperature (1)H NMR spectroscopy. An X-ray diffraction study of the assemblies (1a)2 and (1d)2 revealed the formation of rectangular (9.6 Å × 6.6 Å) hexanuclear metallomacrocycles with alternating dinuclear (Rh2) and mononuclear (Rh or Pt) corners. The hexanuclear core is supported by four pyridine-4-thiolate linkers, which are bonded through the thiolate moieties to the dinuclear rhodium units, exhibiting a bent-anti arrangement, and through the peripheral pyridinic nitrogen atoms to the mononuclear corners.

Organometallic macromolecules with piano stool coordination repeating units: chain configuration and stimulated solution behaviour

PFpP with piano stool coordination repeating units (Fe-acyl complex) adopts linear chain configuration with a P–Fe–C backbone surrounded by aromatic groups, exhibiting stimulated solution behaviour in DMSO.

Ring-shaped Re(I) multinuclear complexes with unique photofunctional properties

We synthesized for the first time a series of emissive ring-shaped Re(I) complexes (Re-rings) with various numbers of Re(I) units and various lengths of bridge ligands. The photophysical properties of the Re-rings could be varied widely through changes in the size of the central cavity. A smaller central cavity of the Re-rings induced intramolecular π-π interactions between the ligands and consequently caused a stronger emission and a longer lifetime of the excited state. The Re-rings can function as efficient and durable photosensitizers. The combination of a trinuclear Re-ring photosensitizer with fac-[Re(bpy)(CO)3(MeCN)](+) (bpy = 2,2'-bipyridine) as a catalyst photocatalyzed CO2 reduction with the highest quantum yield of 82%.

Photochemistry of fac-[Re(bpy)(CO)3Cl]

The photochemistry of fac-[Re(bpy)(CO)₃Cl] (1 a; bpy=2,2′-bipyridine) initiated by irradiation using <330 nm light has been investigated. Isomerization proceeded in THF to give the corresponding mer-isomer 1 b. However, in the presence of a small amount of MeCN, the main product was the CO-ligand-substituted complex (OC-6-24)-[Re(bpy)(CO)₂Cl(MeCN)] (2 c; bpy=2,2′-bipyridine). In MeCN, two isomers, 2 c and its (OC-6-34) form (2 a), were produced. Only 2 c thermally isomerized to produce the (OC-6-44) form 2 b. A detailed investigation led to the conclusion that both 1 b and 2 c are produced by a dissociative mechanism, whereas 2 a forms by an associative mechanism. A comparison of the ultrafast transient UV-visible absorption, emission, and IR spectra of 1 a acquired by excitation using higher-energy light (e.g., 270 nm) and lower-energy light (e.g., 400 nm) gave detailed information about the excited states, intermediates, and kinetics of the photochemical reactions and photophysical processes of 1 a. Irradiation of 1 a using the higher-energy light resulted in the generation of the higher singlet excited state with τ≤25 fs, from which intersystem crossing proceeded to give the higher triplet state (³HES(1)). In THF, ³HES(1) was competitively converted to both the triplet ligand field (³LF) and metal-to-ligand charge transfer (³mLCT) with lifetimes of 200 fs, in which the former is a reactive state that converts to [Re(bpy)(CO)₂Cl(thf)]⁺ (1 c) within 10 ps by means of a dissociative mechanism. Re-coordination of CO to 1 c gives both 1 a and 1 b. In MeCN, irradiation of 1 a by using high-energy light gives the coordinatively unsaturated complex, which rapidly converted to 2 c. A seven-coordinate complex is also produced within several hundred femtoseconds, which is converted to 2 a within several hundred picoseconds.

Development of highly efficient supramolecular CO2 reduction photocatalysts with high turnover frequency and durability

New Ru(II)-Re(I) supramolecular photocatalysts with a rhenium(I) biscarbonyl complex as a catalyst unit were synthesized. They photocatalyzed CO2 reduction to CO using a wide-range of visible light, and their photocatalytic abilities were strongly affected by the phosphorus ligands on the Re site. Especially, Ru-Re(FPh), with two P(p-FPh)3 ligands, exhibited tremendous photocatalytic properties, i.e. TN(CO) = 207 and phi(CO) = 0.15, and, in addition, this is one of the fastest-operating photocatalysts for CO2 reduction to CO, with TF(CO) = 281 h(-1). We also clarified a balance of transferred electrons in this photocatalytic reaction and found that the two electrons necessary for CO formation were provided by two sequential reductive quenching processes of the excited Ru photosensitizer unit by the reductant BNAH.