Molybdenum-Catalyzed Transformation of Molecular Dinitrogen into Silylamine: Experimental and DFT Study on the Remarkable Role of Ferrocenyldiphosphine Ligands

Dinitrogen silylation catalyzed by silylene cobalt(I) and silylene iron(I) chlorides

In this contribution, Co(PMe3)3Cl (1), bis(silylene) cobalt chlorides Co(LSi:)2(PMe3)2Cl (LSi: = {PhC(NtBu)2}SiCl (2); {p-CH3C6H4C(NtBu)2}SiCl (3); and {p-tBuC6H4C(NtBu)2}SiCl (4)) and bis(silylene) iron chlorides Fe(LSi:)2(PMe3)2Cl (LSi: = {PhC(NtBu)2}SiCl (5); {p-CH3C6H4C(NtBu)2}SiCl (6); {p-tBuC6H4C(NtBu)2}SiCl (7) and Fe(PMe3)2Cl2 (8)) were synthesized to study the effects of different metals and silylene ligands on the catalytic activity of complexes 1-8 in dinitrogen silylation reaction. The experimental results indicate that there is no substantial difference in catalytic activity between the phosphine cobalt complex 1 and the silylene cobalt chlorides 2-4 although the cobalt silylene complex 2 has slightly better catalytic activity than complexes 1, 3 and 4 in the dinitrogen silylation. Silylene iron complexes 5-7 are more active than the phosphine iron complex 8. Among the three silylene iron(I) chlorides 5-7, complex 5 is the most effective catalyst for dinitrogen silylation and 402 equiv. of N(SiMe3)3 could be obtained per Fe atom. In the dinitrogen silylation reaction catalyzed by iron complexes, the introduction of the silylene ligand made the silylene iron complexes 5-7 more active than the phosphine iron complex 8. In addition, iron chlorides 5-8 are more effective catalysts than cobalt(I) chlorides 1-4 for the dinitrogen silylation reaction. Complexes 3, 4, 6 and 7 were new complexes, and their molecular structures were determined by single crystal X-ray diffraction analysis.

Catalytic Nitrogen Fixation Using Well-Defined Molecular Catalysts under Ambient or Mild Reaction Conditions

Ammonia (NH3) is industrially produced from dinitrogen (N2) and dihydrogen (H2) by the Haber-Bosch process, although H2 is prepared from fossil fuels, and the reaction requires harsh conditions. On the other hand, microorganisms have fixed nitrogen under ambient reaction conditions. Recently, well-defined molecular transition metal complexes have been found to work as catalyst to convert N2 into NH3 by reactions with chemical reductants and proton sources under ambient reaction conditions. Among them, involvement of both N2-splitting pathway and proton-coupled electron transfer is found to be very effective for high catalytic activity. Furthermore, direct electrocatalytic and photocatalytic conversions of N2 into NH3 have been recently achieved. In addition to catalytic formation of NH3, selective catalytic conversion of N2 into hydrazine (NH2NH2) and catalytic silylation of N2 into silylamines have been reported. Catalytic C-N bond formation has been more recently established to afford cyanate anion (NCO-) under ambient reaction conditions. Further development of direct conversion of N2 into nitrogen-containing compounds as well as green ammonia synthesis leading to the use of ammonia as an energy carrier is expected.

Synthesis of Bis(silylene) Iron Chlorides and Their Catalytic Activity for Dinitrogen Silylation

In this study, three tetracoordinated bis(silylene) iron(II) chlorides, namely, [SiCHRSi]FeCl2 (1) (R = H), (2) (R = CH3), and (3) (R = Ph), were synthesized through the reactions of the three different bis(silylene) ligands [LSiCHRSiL] (L = PhC(NtBu)2, L1 (R = H), L2 (R = CH3), L3 (R = Ph)) with FeCl2·(THF)1.5 in THF. The bis(silylene) Fe complexes 1-3 could be used as effective catalysts for dinitrogen silylation, with complex 3 demonstrating the highest turnover number (TON) of 746 equiv among the three complexes. The catalytic mechanism was explored, revealing the involvement of the pentacoordinated bis(dinitrogen) iron(0) complexes [SiCHRSi]Fe(N2)2(THF), (4)-(6), as the active catalysts in the dinitrogen silylation reaction. Additionally, the cyclic silylene compound 10 was obtained from the reaction of L1 with KC8. Single-crystal X-ray diffraction analyses confirmed the molecular structures of complexes 1-3 and 10 in the solid state.

Mechanism of Nitrogen-Carbon Bond Formation from Iron(IV) Disilylhydrazido Intermediates during N2 Reduction

We recently reported a reaction sequence that activates C-H bonds in simple arenes as well as the N-N triple bond in N₂, delivering the aryl group to N₂ to form a new N-C bond (Nature 2020, 584, 221). This enables the transformation of abundant feedstocks (arenes and N₂) into N-containing organic compounds. The key N-C bond forming step occurs upon partial silylation of N₂. However, the pathway through which reduction, silylation, and migration occurred was unknown. Here, we describe synthetic, structural, magnetic, spectroscopic, kinetic, and computational studies that elucidate the steps of this transformation. N₂ must be silylated twice at the distal N atom before aryl migration can occur, and sequential silyl radical and silyl cation addition is a kinetically competent pathway to a formally iron(IV)-NN(SiMe₃)₂ intermediate that can be isolated at low temperature. Kinetic studies show its first-order conversion to the migrated product, and DFT calculations indicate a concerted transition state for migration. The electronic structure of the formally iron(IV) intermediate is examined using DFT and CASSCF calculations, which reveal contributions from iron(II) and iron(III) resonance forms with oxidized NNSi₂ ligands. The depletion of electron density from the Fe-coordinated N atom makes it electrophilic enough to accept the incoming aryl group. This new pathway for the N-C bond formation offers a method for functionalizing N₂ using organometallic chemistry.

Nitrogen reduction by the Fe sites of synthetic [Mo3S4Fe] cubes

Nitrogen (N₂) fixation by nature, which is a crucial process for the supply of bio-available forms of nitrogen, is performed by nitrogenase. This enzyme uses a unique transition-metal-sulfur-carbon cluster as its active-site co-factor ([(R-homocitrate)MoFe₇S₉C], FeMoco)^1,2, and the sulfur-surrounded iron (Fe) atoms have been postulated to capture and reduce N₂ (refs. ^3-6). Although there are a few examples of synthetic counterparts of the FeMoco, metal-sulfur cluster, which have shown binding of N₂ (refs. ^7-9), the reduction of N₂ by any synthetic metal-sulfur cluster or by the extracted form of FeMoco¹⁰ has remained elusive, despite nearly 50 years of research. Here we show that the Fe atoms in our synthetic [Mo₃S₄Fe] cubes^11,12 can capture a N₂ molecule and catalyse N₂ silylation to form N(SiMe₃)₃ under treatment with excess sodium and trimethylsilyl chloride. These results exemplify the catalytic silylation of N₂ by a synthetic metal-sulfur cluster and demonstrate the N₂-reduction capability of Fe atoms in a sulfur-rich environment, which is reminiscent of the ability of FeMoco to bind and activate N₂.

Synthesis and Reactivity of Manganese Complexes Bearing Anionic PNP- and PCP-Type Pincer Ligands toward Nitrogen Fixation

A series of manganese complexes bearing an anionic pyrrole-based PNP-type pincer ligand and an anionic benzene-based PCP-type pincer ligand is synthesized and characterized. The reactivity of these complexes toward ammonia formation and silylamine formation from dinitrogen under mild conditions is evaluated to produce only stoichiometric amounts of ammonia and silylamine, probably because the manganese pincer complexes are unstable under reducing conditions.

Synthesis and Reactivity of Cobalt-Dinitrogen Complexes Bearing Anionic PCP-Type Pincer Ligands toward Catalytic Silylamine Formation from Dinitrogen

A series of cobalt(I)-dinitrogen complexes bearing anionic 4-substituted benzene-based PCP-type pincer ligands are synthesized and characterized. These complexes work as highly efficient catalysts for the formation of silylamine from dinitrogen under ambient reaction conditions to produce up to 371 equiv of silylamine based on the cobalt atom of the catalyst.

N2 Cleavage on d4/d4 Molybdenum Centers and Its Further Conversion into Iminophosphorane under Mild Conditions

The synthesis of N-containing organophosphine compounds using N₂ as the nitrogen source under mild conditions has attracted much attention. Herein, the conversion of N₂ into iminophosphorane was reported. By visible light irradiation, N₂ was split on a Mo^II complex bearing a PNCNP ligand, directly forming the Mo^V nitride. After the N-P bond formation on the terminal nitride, the N atom from N₂ was ultimately transferred into iminophosphorane. Key intermediates were characterized.

Amorphization and defect engineering in constructing ternary composite Ag/PW10V2/am-TiO2−x for enhanced photocatalytic nitrogen fixation

Ag/PW10V2/am-TiO2−x was designed by decorating OVs-enriched am-TiO2−x with Ag NPs and PW10V2. The formed Z-scheme heterojunction, Ag–am-TiO2−x interface and plentiful surface OVs account for its high photocatalytic efficiency in nitrogen fixation.

Reduction of highly bulky triphenolamine molybdenum nitrido and chloride complexes

Transition metal nitrides are key intermediates in the catalytic reduction of dinitrogen to ammonia. To date, transition metal nitride complexes with the triphenolamine (TPA) ligand have not been reported and the system with the ligand has been much less studied for ammonia formation compared with other systems. Herein, we report a series of molybdenum complexes supported by a sterically demanding TPA ligand, including a nitrido complex NMo(TPA). We achieved the stoichiometric conversion of the nitride moiety into ammonia under ambient conditions by adding proton and electron sources to NMo(TPA). However, the catalytic turnover for N₂ reduction to ammonia was not observed in the triphenolamine ligand system unlike the Schrock system-triamidoamine ligand. Density functional theory calculation revealed that the molybdenum center favors binding NH₃ over N₂ by 16.9 kcal mol^-1 and the structural lability of the trigonal bipyramidal (TBP) molybdenum complex seems to prevent catalytic turnover. Our systematic study showed that the electronegativity and bond length of ancillary ligands determine the preference between N₂ and NH₃, suggesting a systematic design strategy for improvement.

Fixation of Dinitrogen at an Asymmetric Binuclear Titanium Complex

A new type of dititanium dinitrogen complex supported by a triphenolamine (TPA) ligand is reported. Analysis by single-crystal X-ray diffraction and Raman and NMR spectroscopy reveals different coordination geometries for the two titanium centers. Hence, coordination of TPA and a nitrogen ligand results in trigonal-bipyramidal geometry, while an octahedral titanium center is obtained upon additional coordination of an ethoxide generated upon C-O bond cleavage in a diethyl ether solvent molecule. The titanium complex successfully generates ammonia in the presence of an excess amount of PCy₃HI and KC₈ in 154% yield (per titanium atom). A titanium complex with a bulkier TPA does not form a dinitrogen complex, and mononuclear titanium dinitrogen complexes were not accessible, presumably because of the high tendency of early transition metals to form binuclear dinitrogen complexes.

Catalytic Reduction of N2 to Borylamine at a Molybdenum Complex

Catalytic formation of borylamines from atmospheric N₂ is achieved for the first time using a series of homogenous (triphosphine)Mo complexes. Stepwise functionalization of the (triphosphine)Mo-nitrido complex with chloroborane led to the synthesis of the imido complex. Electrochemical characterization of the (PPP)Mo-nitrido and (PPP)Mo-borylimido complexes showed that the latter is much more easily reduced.

Merging Pincer Motifs and Potential Metal-Metal Cooperativity in Cobalt Dinitrogen Chemistry: Efficient Catalytic Silylation of N2 to N(SiMe3 )3

Using a pyrazolate-bridged dinucleating ligand that provides two proximate pincer-type PNN binding sites ("two-in-one pincer"), different synthetic routes have been developed towards its dicobalt(I) complex 2 that features a twice deprotonated ligand backbone and two weakly activated terminal N2 substrate ligands directed into the bimetallic pocket. Protonation of 2 is shown to occur at the ligand scaffold and to trigger conversion to a tetracobalt(I) complex 4 with two end-on μ1,2 -bridging N2 ; in THF 4 is labile and undergoes temperature-dependent N2 /triflate ligand exchange. These pyrazolate-based systems combine the potential of exhibiting both metal-metal and metal-ligand cooperativity, viz. two concepts that have emerged as promising design motifs for molecular N2 fixation catalysts. Complex 2 serves as an efficient (pre)catalyst for the reductive silylation of N2 into N(SiMe3 )3 (using KC8 and Me3 SiCl), yielding up to 240 equiv N(SiMe3 )3 per catalyst.

Ammonia Formation Catalyzed by a Dinitrogen-Bridged Dirhenium Complex Bearing PNP-Pincer Ligands under Mild Reaction Conditions*

A series of rhenium complexes bearing a pyridine-based PNP-type pincer ligand are synthesized from rhenium phosphine complexes as precursors. A dinitrogen-bridged dirhenium complex bearing the PNP-type pincer ligands catalytically converts dinitrogen into ammonia during the reaction with KC₈ as a reductant and [HPCy₃ ]BAr^F ₄ (Cy=cyclohexyl, Ar^F =3,5-(CF₃ )₂ C₆ H₃ ) as a proton source at -78 °C to afford 8.4 equiv of ammonia based on the rhenium atom of the catalyst. The rhenium-dinitrogen complex also catalyzes silylation of dinitrogen in the reaction with KC₈ as a reductant and Me₃ SiCl as a silylating reagent under ambient reaction conditions to afford 11.7 equiv of tris(trimethylsilyl)amine based on the rhenium atom of the catalyst. These results demonstrate the first successful example of catalytic nitrogen fixation under mild reaction conditions using rhenium-dinitrogen complexes as catalysts.

Comprehensive insights into synthetic nitrogen fixation assisted by molecular catalysts under ambient or mild conditions

N2 is fixed as NH3 industrially by the Haber-Bosch process under harsh conditions, whereas biological nitrogen fixation is achieved under ambient conditions, which has prompted development of alternative methods to fix N2 catalyzed by transition metal molecular complexes. Since the early 21st century, catalytic conversion of N2 into NH3 under ambient conditions has been achieved by using molecular catalysts, and now H2O has been utilized as a proton source with turnover frequencies reaching the values found for biological nitrogen fixation. In this review, recent advances in the development of molecular catalysts for synthetic N2 fixation under ambient or mild conditions are summarized, and potential directions for future research are also discussed.

Dinitrogen Fixation: Rationalizing Strategies Utilizing Molecular Complexes

Dinitrogen (N2 ) is the most abundant gas in Earth's atmosphere, but its inertness hinders its use as a nitrogen source in the biosphere and in industry. Efficient catalysts are hence required to ov. ercome the high kinetic barriers associated to N2 transformation. In that respect, molecular complexes have demonstrated strong potential to mediate N2 functionalization reactions under mild conditions while providing a straightforward understanding of the reaction mechanisms. This Review emphasizes the strategies for N2 reduction and functionalization using molecular transition metal and actinide complexes according to their proposed reaction mechanisms, distinguishing complexes inducing cleavage of the N≡N bond before (dissociative mechanism) or concomitantly with functionalization (associative mechanism). We present here the main examples of stoichiometric and catalytic N2 functionalization reactions following these strategies.

Molybdenum-Containing Metalloenzymes and Synthetic Catalysts for Conversion of Small Molecules

The energy deficiency and environmental problems have motivated researchers to develop energy conversion systems into a sustainable pathway, and the development of catalysts holds the center of the research endeavors. Natural catalysts such as metalloenzymes have maintained energy cycles on Earth, thus proving themselves the optimal catalysts. In the previous research results, the structural and functional analogs of enzymes and nano-sized electrocatalysts have shown promising activities in energy conversion reactions. Mo ion plays essential roles in natural and artificial catalysts, and the unique electrochemical properties render its versatile utilization as an electrocatalyst. In this review paper, we show the current understandings of the Mo-enzyme active sites and the recent advances in the synthesis of Mo-catalysts aiming for high-performing catalysts.

Coupling dinitrogen and hydrocarbons through aryl migration

A persistent challenge in chemistry is to activate abundant, yet inert molecules such as hydrocarbons and atmospheric N₂. In particular, forming C–N bonds from N₂ typically requires a reactive organic precursor¹, which limits the ability to design catalytic cycles. Here, we report an diketiminate-supported iron system that is able to sequentially activate benzene and N₂ to form aniline derivatives. The key to this new coupling reaction is the partial silylation of a reduced iron-N₂ complex, which is followed by migratory insertion of a benzene-derived phenyl group to the nitrogen. Further reduction releases the nitrogen products, and the resulting iron species can re-enter the cyclic pathway. Using a mixture of sodium powder, crown ether, and trimethylsilyl bromide, an easily prepared diketiminate iron bromide complex² can mediate the one-pot conversion of several petroleum-derived compounds into the corresponding silylated aniline derivatives using N₂ as the nitrogen source. Numerous compounds along the cyclic pathway have been isolated and crystallographically characterized; their reactivity outlines the mechanism including the hydrocarbon activation step and the N₂ functionalization step. This strategy incorporates nitrogen atoms from N₂ directly into abundant hydrocarbons.

Synthesis of Dinuclear Mo-Fe Hydride Complexes and Catalytic Silylation of N2

Two transition-metal atoms bridged by hydrides may represent a useful structural motif for N₂ activation by molecular complexes and the enzyme active site. In this study, dinuclear Mo^IV -Fe^II complexes with bridging hydrides, Cp^R Mo(PMe₃ )(H)(μ-H)₃ FeCp* (2 a; Cp^R =Cp*=C₅ Me₅ , 2 b; Cp^R =C₅ Me₄ H), were synthesized via deprotonation of Cp^R Mo(PMe₃ )H₅ (1 a; Cp^R =Cp*, 1 b; Cp^R =C₅ Me₄ H) by Cp*FeN(SiMe₃ )₂ , and they were characterized by spectroscopy and crystallography. These Mo-Fe complexes reveal the shortest Mo-Fe distances ever reported (2.4005(3) Å for 2 a and 2.3952(3) Å for 2 b), and the Mo-Fe interactions were analyzed by computational studies. Removal of the terminal Mo-H hydride in 2 a-2 b by [Ph₃ C]⁺ in THF led to the formation of cationic THF adducts [Cp^R Mo(PMe₃ )(THF)(μ-H)₃ FeCp*]⁺ (3 a; Cp^R =Cp*, 3 b; Cp^R =C₅ Me₄ H). Further reaction of 3 a with LiPPh₂ gave rise to a phosphido-bridged complex Cp*Mo(PMe₃ )(μ-H)(μ-PPh₂ )FeCp* (4). A series of Mo-Fe complexes were subjected to catalytic silylation of N₂ in the presence of Na and Me₃ SiCl, furnishing up to 129±20 equiv of N(SiMe₃ )₃ per molecule of 2 b. Mechanism of the catalytic cycle was analyzed by DFT calculations.

Recent Progress with Pincer Transition Metal Catalysts for Sustainability

Our planet urgently needs sustainable solutions to alleviate the anthropogenic global warming and climate change. Homogeneous catalysis has the potential to play a fundamental role in this process, providing novel, efficient, and at the same time eco-friendly routes for both chemicals and energy production. In particular, pincer-type ligation shows promising properties in terms of long-term stability and selectivity, as well as allowing for mild reaction conditions and low catalyst loading. Indeed, pincer complexes have been applied to a plethora of sustainable chemical processes, such as hydrogen release, CO2 capture and conversion, N2 fixation, and biomass valorization for the synthesis of high-value chemicals and fuels. In this work, we show the main advances of the last five years in the use of pincer transition metal complexes in key catalytic processes aiming for a more sustainable chemical and energy production.

Evaluating Metal Ion Identity on Catalytic Silylation of Dinitrogen Using a Series of Trimetallic Complexes

We report catalytic silylation of dinitrogen to tris(trimethylsilyl)amine by a series of trinuclear first row transition metal complexes (M = Cr, Mn, Fe, Co, Ni) housed in our tris(β-diketiminate) cyclophane (L ^3- ). Yields are expectedly dependent on metal ion type ranging from 14 to 199 equiv NH₄ ⁺/complex after protonolysis for the Mn to Co congeners, respectively. For the series of complexes, the number of turnovers trend observed is Co > Fe > Cr > Ni > Mn, consistent with prior reports of greater efficacy of Co over Fe in other ligand systems for this reaction.

Terminal uranium(V)-nitride hydrogenations involving direct addition or Frustrated Lewis Pair mechanisms

Despite their importance as mechanistic models for heterogeneous Haber Bosch ammonia synthesis from dinitrogen and dihydrogen, homogeneous molecular terminal metal-nitrides are notoriously unreactive towards dihydrogen, and only a few electron-rich, low-coordinate variants demonstrate any hydrogenolysis chemistry. Here, we report hydrogenolysis of a terminal uranium(V)-nitride under mild conditions even though it is electron-poor and not low-coordinate. Two divergent hydrogenolysis mechanisms are found; direct 1,2-dihydrogen addition across the uranium(V)-nitride then H-atom 1,1-migratory insertion to give a uranium(III)-amide, or with trimesitylborane a Frustrated Lewis Pair (FLP) route that produces a uranium(IV)-amide with sacrificial trimesitylborane radical anion. An isostructural uranium(VI)-nitride is inert to hydrogenolysis, suggesting the 5f¹ electron of the uranium(V)-nitride is not purely non-bonding. Further FLP reactivity between the uranium(IV)-amide, dihydrogen, and triphenylborane is suggested by the formation of ammonia-triphenylborane. A reactivity cycle for ammonia synthesis is demonstrated, and this work establishes a unique marriage of actinide and FLP chemistries.

Despite their importance as mechanistic models for Haber Bosch ammonia synthesis from N₂ and H₂, high oxidation state terminal metal-nitrides are notoriously unreactive towards H₂. Here, the authors report hydrogenolysis of a uranium(V)-nitride, which can occur directly or by Frustrated Lewis Pair chemistry with a borane ancillary.

Dinitrogen activation by a penta-pyridyl molybdenum complex

A new dinitrogen (N₂) molybdenum(0) complex supported exclusively by pyridine ligands was synthesized.

Catalytic reduction of dinitrogen to tris(trimethylsilyl)amine using rhodium complexes with a pyrrole-based PNP-type pincer ligand

Rhodium complexes bearing an anionic pyrrole-based PNP-type pincer ligand are synthesised and found to work as effective catalysts for the transformation of molecular dinitrogen into tris(trimethylsilyl)amine under mild reaction conditions. This is the first successful example of rhodium-catalysed dinitrogen reduction under mild reaction conditions.

Conversion of dinitrogen to tris(trimethylsilyl)amine catalyzed by titanium triamido-amine complexes

By using a triaryl-Tren ligated titanium dinitrogen complex, K2[{(Xy-N3N)Ti}2(μ2-N2)] (3), prepared by two-electron reduction of [TiCl(Xy-N3N)] (1-Cl) under N2 atmosphere, catalytic fixation of molecular nitrogen to form tris(trimethylsilyl)amine was achieved under ambient conditions with a turnover number (TON) of up to 16.5 per titanium atom.

Development of catalytic nitrogen fixation using transition metal-dinitrogen complexes under mild reaction conditions

This paper describes our recent progress in catalytic nitrogen fixation using transition metal-dinitrogen complexes as catalysts. Our research group has recently developed novel reaction systems for the catalytic transformation of molecular dinitrogen into ammonia and hydrazine using molybdenum-, iron-, cobalt- and vanadium-dinitrogen complexes under mild reaction conditions. The new findings presented in this paper may provide a new approach to the development of economical nitrogen fixation to replace the energy-consuming Haber-Bosch process.

Fe-Catalyzed Conversion of N2 to N(SiMe3)3 via an Fe-Hydrazido Resting State

The catalytic conversion of N₂ to N(SiMe₃)₃ by homogeneous transition metal compounds is a rapidly developing field, yet few mechanistic details have been experimentally elucidated for 3 d element catalysts. Herein we show that Fe(PP)₂(N₂) (PP = R₂PCH₂CH₂PR₂; R = Me, 1^Me; R = Et, 1^Et) are highly effective for the catalytic production of N(SiMe₃)₃ from N₂ (using KC₈/Me₃SiCl), with the yields being the highest reported to date for Fe-based catalysts. We propose that N₂ fixation proceeds via electrophilic N_β silylation and 1e^- reduction to form unstable Fe^I(NN-SiMe₃) intermediates, which disproportionate to 1^Me/Et and hydrazido Fe^II[N-N(SiMe₃)₂] species (3^Me/Et); the latter act as resting states on the catalytic cycle. Subsequent 2e^- reduction of 3^Me/Et leads to N-N scission and formation of [N(SiMe₃)₂]^- and putative anionic Fe imido products. These mechanistic results are supported by both experiment and DFT calculations.