Finite Size Effect of Proton-Conductivity of Amorphous Silicate Thin Films Based on Mesoscopic Fluctuation of Glass Network

Preparation of silicate nanosheets by delaminating RUB-18 for transparent, proton conducting membranes

The present study demonstrated delamination of the layered silicate RUB-18 with no organo-modification of the silanol group. The obtained nanosheets showed a homogeneous thickness. A sponge-like material and a free-standing transparent, dense membrane were reconstructed using the nanosheets.

Proton-Conductivity Enhancement in Polymer Thin Films

Highly proton conductive polymers have long attracted the attention of researchers for use in energy conversion, sensors, catalysts, and other applications. From the viewpoint of the scientific history of the creation of highly proton conductive polymers, one fundamental approach is based on the strategy of phase-segregated structures with strong acid groups. This Feature Article presents a new approach to enhancing the proton conductivity of the polymer thin films using an interface that can modify the degrees of freedom for a polymer structure through interaction between the substrate surface and polymers. I introduce suppressed proton conductivity into Nafion thin films and then specifically examine the enhancement in proton conductivity by the molecular orientation of the polymers. As the last topic, a highly proton conductive organized polyimide thin film is demonstrated using the lyotropic liquid-crystal property. Both molecular ordering and the in-plane oriented structure can enhance proton conductivity. Moreover, the optical domain and degree of molecular ordering derived from the molecular weight can contribute strongly to the proton transport property.

Development of an All Solid State Battery Incorporating Graphene Oxide as Proton Conductor

Graphene oxide (GO) shows high proton conductivity (≈10-4 Scm-1), excellent mechanical stability, and electrical insulation property, which makes it an ideal candidate for use as a proton conducting solid state electrolyte. The prospects of using GO as single phase solid electrolyte in an all solid battery is presented herein. A battery with the cell configuration: Zn + ZnSO4•7H2O + graphite (anode) || GO (electrolyte) || MnO2 + graphite (cathode) is fabricated. Cyclic voltammetry confirms its rechargeable nature. The respective discharge capacity and power density of the cell are 360 μAh and 19.5 mW kg-1 at a constant current drain of 3 μA under the experimental conditions employed. GO based proton conductors are cleaner and cheaper than other solid electrolytes. The current study strongly suggests that GO can be used as a practical and beneficial component in solid state battery applications with low energy feedback.

Role of hydrophilic groups in acid intercalated graphene oxide as a superionic conductor

The role of hydrophilic groups in acid intercalated GO for proton conduction has been justified. The higher extents of adsorbed water due to the presence of hydrophilic groups are primarily responsible for offering enhanced proton conductivity.

Thermally Stable Super Ionic Conductor from Carbon Sphere Oxide

A highly stable proton conductor has been developed from carbon sphere oxide (CSO). Carbon sphere (CS) generated from sucrose was oxidized successfully to CSO using Hummers' graphite oxidation technique. At room temperature and 90 % relative humidity, the proton conductivity of thin layer CSO on microsized comb electrode was found to be 8.7×10(-3)  S cm(-1) , which is higher than that for a similar graphene oxide (GO) sample (3.4×10(-3)  S cm(-1) ). The activation energy (Ea ) of 0.258 eV suggests that the proton is conducted through the Grotthuss mechanism. The carboxyl functional groups on the CSO surface are primarily responsible for transporting protons. In contrast to conventional carbon-based proton conductors, in which the functional groups decompose around 80 °C, CSO has a stable morphology and functional groups with reproducible proton conductivity up to 400 °C. Even once annealed at different temperatures at high relative humidity, the proton conductivity of CSO remains almost unchanged, whereas significant change is seen with a similar GO sample. After annealing at 100 and 200 °C, the respective proton conductivity of CSO was almost the same, and was about ∼50 % of the proton conductivity at room temperature. Carbon-based solid electrolyte with such high thermal stability and reproducible proton conductivity is desired for practical applications. We expect that a CSO-based proton conductor would be applicable for fuel cells and sensing devices operating under high temperatures.

Coupling carbon dioxide reduction with water oxidation in nanoscale photocatalytic assemblies

Closing the photosynthetic cycle on the nanometer scale under membrane separation of the half reactions for developing scalable artificial photosystems.