Mimicking the Silicon Surface: Reactivity of Silyl Radical Cations toward Nucleophiles

Anti-Adhesion Behavior from Ring-Strain Amine Cyclic Monolayers Grafted on Silicon (111) Surfaces

In this manuscript, a series of amine tagged short cyclic molecules (cyclopropylamine, cyclobutylamine, cyclopentylamine and cyclohexylamine) were thermally grafted onto p-type silicon (111) hydride surfaces via nucleophilic addition. The chemistries of these grafting were verified via XPS, AFM and sessile droplet measurements. Confocal microscopy and cell viability assay was performed on these surfaces incubated for 24 hours with triple negative breast cancer cells (MDA-MB 231), gastric adenocarcinoma cells (AGS) endometrial adenocarcinoma (Hec1A). All cell types had shown a significant reduction when incubated on these ring-strain cyclic monolayer surfaces than compared to standard controls. The expression level of focal adhesion proteins (vinculin, paxilin, talin and zyxin) were subsequently quantified for all three cell types via qPCR analysis. Cells incubate on these surface grafting were observed to have reduced levels of adhesion protein expression than compared to positive controls (collagen coating and APTES). A potential application of these anti-adhesive surfaces is the maintenance of the chondrocyte phenotype during in-vitro cell expansion. Articular chondrocytes cultured for 6 days on ring strained cyclopropane-modified surfaces was able to proliferate but had maintained a spheroid/aggregated phenotype with higher COL2A1 and ACAN gene expression. Herein, these findings had help promote grafting of cyclic monolayers as an viable alternative for producing antifouling surfaces.

Functionalized Self-Assembled Monolayers Bearing Diiminate Complexes Immobilized through Covalently Anchored Ligands

The application of synthetic organic chemistry to the surface chemistry of monolayer arrays adds a novel dimension to the power of these systems for surface modification. This paper describes the elaboration of simple functionalized monolayers into dialdimine and dialdiminate ligands tethered to the monolayer surface. These ligands are then used to coordinate metal ions in an effort to form diiminate complexes with control over their environment and orientation. Ligand anchoring is best achieved through either thiol-ene photochemistry or azide-acetylene "click" chemistry. There is an influence of ligand bulk on some surface transformations, and in some cases reactions that have been reported to be effective on simple, homogeneous monolayer surfaces are not applicable to a more complex monolayer environment. The large excess of solution reagents relative to monolayer surface functionality adds another measure of difficulty to the control of interfacial reactions. In instances where the anchoring chain includes functional groups that can directly interact with metal ions, the metalation of ligand-bearing surfaces resulted in a higher metal ion content than would have been expected from binding only to the diimine ligands.

High-Density Modification of H-Terminated Si(111) Surfaces Using Short-Chain Alkynes

H-Si(111)-terminated surfaces were alkenylated via two routes: through a novel one-step gas-phase hydrosilylation reaction with short alkynes (C₃ to C₆) and for comparison via a two-step chlorination and Grignard alkenylation process. All modified surfaces were characterized by static water contact angles and X-ray photoelectron spectroscopy (XPS). Propenyl- and butenyl-coated Si(111) surfaces display a significantly higher packing density than conventional C₁₀-C₁₈ alkyne-derived monolayers, showing the potential of this approach. In addition, propyne chemisorption proceeds via either of two approaches: the standard hydrosilylation at the terminal carbon (lin) at temperatures above 90 °C and an unprecedented reaction at the second carbon (iso) at temperatures below 90 °C. Molecular modeling revealed that the packing energy of a monolayer bonded at the second carbon is significantly more favorable, which drives iso-attachment, with a dense packing of surface-bound iso-propenyl chains at 40% surface coverage, in line with the experiments at <90 °C. The highest density monolayers are obtained at 130 °C and show a linear attachment of 1-propenyl chains with 92% surface coverage.

Stereochemistry of Nucleophilic Substitutions on Benzyl-silane and -germane Cation Radicals: Application of the Endocyclic Restriction Test

Benzyltrialkylgermane cation radicals were generated and spectroscopically characterized by nanosecond transient absorption spectroscopy. The germane cation radicals were found to rapidly react with nucleophiles (e.g., alcohols) in reactions that were first-order in cation radical and first-order in nucleophile. The geometries of the transition states for nucleophilic substitutions on benzyl-silane and -germane cation radicals were investigated by using the endocyclic restriction test. Cation radicals containing tethered nucleophiles that required endocyclic transition states with small angles between the bond being formed to the nucleophilic atom and the bond to the leaving group reacted ∼250 times more slowly than cation radicals with tethered nucleophiles where a large bond angle can be accommodated. The results are consistent with the nucleophile-assisted fragmentations proceeding through an inversion transition state.

Single-molecule electrical contacts on silicon electrodes under ambient conditions

The ultimate goal in molecular electronics is to use individual molecules as the active electronic component of a real-world sturdy device. For this concept to become reality, it will require the field of single-molecule electronics to shift towards the semiconducting platform of the current microelectronics industry. Here, we report silicon-based single-molecule contacts that are mechanically and electrically stable under ambient conditions. The single-molecule contacts are prepared on silicon electrodes using the scanning tunnelling microscopy break-junction approach using a top metallic probe. The molecular wires show remarkable current–voltage reproducibility, as compared to an open silicon/nano-gap/metal junction, with current rectification ratios exceeding 4,000 when a low-doped silicon is used. The extension of the single-molecule junction approach to a silicon substrate contributes to the next level of miniaturization of electronic components and it is anticipated it will pave the way to a new class of robust single-molecule circuits.

The next level of miniaturization of electronic circuits calls for a connection between current single-molecule and traditional semiconductor processing technologies. Here, the authors show a method to prepare metal/molecule/silicon diodes that present high current rectification ratios exceeding 4,000.

Colloidal silicon quantum dots: synthesis and luminescence tuning from the near-UV to the near-IR range

This review describes a series of representative synthesis processes, which have been developed in the last two decades to prepare silicon quantum dots (QDs). The methods include both top-down and bottom-up approaches, and their methodological advantages and disadvantages are presented. Considerable efforts in surface functionalization of QDs have categorized it into (i) a two-step process and (ii) in situ surface derivatization. Photophysical properties of QDs are summarized to highlight the continuous tuning of photoluminescence color from the near-UV through visible to the near-IR range. The emission features strongly depend on the silicon nanostructures including QD surface configurations. Possible mechanisms of photoluminescence have been summarized to ascertain the future challenges toward industrial use of silicon-based light emitters.

The rapid formation of functional monolayers on silicon under mild conditions

Rapid grafting of aromatic-conjugated acetylenes on non-oxidized Si(100) electrodes and the importance of the interplay between the solvent's dielectric constant and the adsorbate's electron-scavenging ability.

Efficient functionalization of oxide-free silicon(111) surfaces: thiol-yne versus thiol-ene click chemistry

Thiol-yne click (TYC) chemistry was utilized as a copper-free click reaction for the modification of alkyne-terminated monolayers on oxide-free Si(111) surfaces, and the results were compared with the analogous thiol-ene click (TEC) chemistry. A wide range of thiols such as 9-fluorenylmethoxy-carbonyl cysteine, thio-β-d-glucose tetraacetate, thioacetic acid, thioglycerol, thioglycolic acid, and 1H,1H,2H,2H-perfluorodecanethiol was immobilized using TYC under photochemical conditions, and all modified surfaces were characterized by static water contact angle measurements, X-ray photoelectron spectroscopy (including a simulation thereof by density functional calculations), and infrared absorption reflection spectroscopy. Surface-bound TYC proceeds with an efficiency of up to 1.5 thiols per alkyne group. This high surface coverage proceeds without oxidizing the Si surface. TYC yielded consistently higher surface coverages than TEC, due to double addition of thiols to alkyne-terminated monolayers. This also allows for the sequential and highly efficient attachment of two different thiols onto an alkyne-terminated monolayer.

Ultralow adhesion and friction of fluoro-hydro alkyne-derived self-assembled monolayers on H-terminated Si(111)

New fluorine-containing terminal alkynes were synthesized and self-assembled onto Si(111) substrates to obtain fluorine-containing organic monolayers. The monolayers were analyzed in detail by ellipsometry, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared reflection absorption spectroscopy (FT-IRRAS), static water contact angle measurements (CA), and atomic force microscopy (AFM). The SAMs exhibit excellent hydrophobicity, with static water contact angles of up to 119° and low critical surface tensions of 5-20 mN/m depending on the number of F atoms per molecule. IRRAS confirmed the formation of highly ordered monolayers, as indicated by the antisymmetric and symmetric stretching vibrations of the CH(2) moieties at 2918-2920 and 2850-2851 cm(-1), respectively. Upon increasing the number of fluorine atoms in the alkyne chains from 0 to 17, the adhesion of bare silica probes to the SAMs in air decreases from 11.6 ± 0.20 mJ/m(2) for fluorine-free (F0) alkyne monolayers to as low as 3.2 ± 0.03 mJ/m(2) for a heptadecafluoro-hexadecyne (F17)-based monolayer. Likewise, the friction coefficient decreases from 5.7 × 10(-2) to 1.2 × 10(-2). The combination of high ordering, excellent hydrophobicity, low adhesion, and low friction makes these fluoro-hydro alkyne-derived monolayers highly promising candidates for use in high-performance microelectronic devices.

Hybrids of organic molecules and flat, oxide-free silicon: high-density monolayers, electronic properties, and functionalization

Since the first report of Si-C bound organic monolayers on oxide-free Si almost two decades ago, a substantial amount of research has focused on studying the fundamental mechanical and electronic properties of these Si/molecule surfaces and interfaces. This feature article covers three closely related topics, including recent advances in achieving high-density organic monolayers (i.e., atomic coverage >55%) on oxide-free Si(111) substrates, an overview of progress in the fundamental understanding of the energetics and electronic properties of hybrid Si/molecule systems, and a brief summary of recent examples of subsequent functionalization on these high-density monolayers, which can significantly expand the range of applicability. Taken together, these topics provide an overview of the present status of this active area of research.

Recent applications of the (TMS)3SiH radical-based reagent

This review article focuses on the recent applications of tris(trimethylsilyl)silane as a radical-based reagent in organic chemistry. Numerous examples of the successful use of (TMS)(3)SiH in radical reductions, hydrosilylation and consecutive radical reactions are given. The use of (TMS)(3)SiH allows reactions to be carried out under mild conditions with excellent yields of products and remarkable chemo-, regio-, and stereoselectivity. The strategic role of (TMS)(3)SiH in polymerization is underlined with emphasis on the photo-induced radical polymerization of olefins and photo-promoted cationic polymerization of epoxides.