Highly Active Iridium/Iridium–Tin/Tin Oxide Heterogeneous Nanoparticles as Alternative Electrocatalysts for the Ethanol Oxidation Reaction

Alkali Metal Cation-Sulfate Anion Ion Pairs Promoted the Cleavage of C-C Bond During Ethanol Electrooxidation

Direct ethanol fuel cells show great promise as a means of converting biomass ethanol derived from biomass into electricity. However, the efficiency of complete conversion is hindered by the low selectivity in breaking the C-C bond. This selectivity is determined by factors such as the material structure and reaction conditions, including the nature of the supporting electrolyte. Cations serve not only as facilitators of electricity conduction through ion migration but also as influencers of the reaction pathways. In this study, we utilized differential electrochemical mass spectrometry to track the in situ generation of CO2 during potential scanning. The presence of alkali cations led to an enhancement in the CO2 selectivity. In addition, in situ Raman spectroscopy provided evidence of the formation of alkali metal cation-sulfate anion ion pairs. The catalytic activity and CO2 selectivity were found to be directly correlated to the ionic strength of these ion pairs.

Tin/Tin Oxide Nanostructures: Formation, Application, and Atomic and Electronic Structure Peculiarities

For a very long period, tin was considered one of the most important metals for humans due to its easy access in nature and abundance of sources. In the past, tin was mainly used to make various utensils and weapons. Today, nanostructured tin and especially its oxide materials have been found to possess many characteristic physical and chemical properties that allow their use as functional materials in various fields such as energy storage, photocatalytic process, gas sensors, and solar cells. This review discusses current methods for the synthesis of Sn/SnO2 composite materials in form of powder or thin film, as well as the application of the most advanced characterization tools based on large-scale synchrotron radiation facilities to study their chemical composition and electronic features. In addition, the applications of Sn/SnO2 composites in various fields are presented in detail.

Bimetallic Pt-Hg Aerogels for Electrocatalytic Upgrading of Ethanol to Acetate

Electrochemical upgrading of ethanol to acetic acid provides a promising strategy to couple with the current hydrogen production from water electrolysis. This work reports the design of a series of bimetallic PtHg aerogels, where the PtHg aerogel exhibits a 10.5-times higher mass activity than that of commercial Pt/C toward ethanol oxidation. More impressively, the PtHg aerogel demonstrates nearly 100% selectivity toward the production of acetic acid. The operando infrared spectroscopic studies and nuclear magnetic resonance analysis verify the preferable C2 pathway mechanism during the reaction. This work opens an avenue for the electrochemical synthesis of acetic acid via ethanol electrolysis.

Tuning intermediate adsorption in structurally ordered substituted PdCu3 intermetallic nanoparticles for enhanced ethanol oxidation reaction

Co and Ni-substituted structurally ordered intermetallic PdCu₃ nanoparticles (NPs) synthesized at low temperature exhibit remarkable enhancement of the ethanol electrooxidation (EOR) activity with improved durability. The first-principle calculations suggest that prompted generation of OH and CH₃CO radicals in close proximity and shifting of the d-band center towards the Fermi level boost the EOR efficiency.

Potential-Dependent Mechanistic Study of Ethanol Electro-oxidation on Palladium

We herein used the density functional theory (DFT) method and the implicit continuum solvation model to study the potential-dependent mechanism of ethanol oxidation reaction (EOR) on palladium (Pd). Energy evolutions of the EOR on low-index Pd surfaces, including (111), (110), and (100), were obtained as a function of the electrode potential. Moreover, the onset potentials for key intermediates and products were calculated. In addition, the potential range for adsorbed ethanol as the most stable adsorption state for proceeding the EOR was determined to be between 0.15 and 0.78 V via the calculated Pourbaix diagrams when considering hydrogen underpotential deposition and Pd(II) oxide formation as competing reactions. Specifically, the behavior of Pd(111) as the dominating facet decided the overall activity of the EOR with onset potentials to acidic acid/acetate at 0.40 V, to carbon dioxide at 0.71 V, and to oxide formation at 0.78 V. Pd(110) was predicted to exhibit the optimal activity toward the EOR with the lowest onset potentials to both the first dehydrogenation process and carbon dioxide at 0.08 and 0.60 V, respectively. A computational potential-dependent mechanism of the EOR was proposed, which agrees well with the experimental curve of linear sweeping voltammetry on the commercial Pd/C electrocatalyst. Our study suggests that targeted control of products can be tuned with proper overpotential and thus provides a foundation for the future development of EOR electrocatalysts.

Mechanistic Insights for Photoelectrochemical Ethanol Oxidation on Black Gold Decorated Monoclinic Zirconia

Surface decoration of metal oxides by metals for enhancing their electrocatalytic properties for organic conversions has attracted a lot of researchers' interest due to their high abundancy, inexpensiveness, and high stability. In the present work, a process for the synthesis of black gold (BG) using a citrate assisted chemical route and m-ZrO₂ by a hydrothermal method at 200 °C has been developed. Further, different concentrations of black gold are being used to decorate the surface of zirconia by exploitation of surface potential of zirconia and gold surfaces. The catalyst having 6 mol % concentration of black gold shows excellent electrocatalytic activity for ethanol oxidation with low oxidation peak potential (1.17 V) and high peak current density (8.54 mA cm^-2). The current density ratio (j_f/j_b) is also high (2.54) for this catalyst indicating its high tolerance toward poisoning by intermediate species generated during the catalytic cycle. The enhanced electrocatalytic activity can be attributed to the high tolerance of gold toward CO poisoning and high stability of the ZrO₂ support. The black gold decorated zirconia catalyst showed enhanced activity during photoelectrochemical studies when the entire spectrum of light falls on the catalyst. Ultrafast transient studies demonstrated plasmonic excitation of metallic free electrons and subsequent charge separation in the black gold-ZrO₂ heterointerface as the key factor for enhanced photoelectrocatalytic activity.

Selective Ethanol Oxidation Reaction at the Rh-SnO2 Interface

Direct ethanol fuel cells (DEFCs) are regarded as an attractive power source with high energy density, bio-renewability, and convenient storage and transportation. However, the anodic reaction of DEFCs, that is, the ethanol oxidation reaction (EOR), suffers from poor efficiency due to the low selectivity to CO₂ (C1 pathway) and high selectivity to CH₃ COOH (C2 pathway). In this study, the selective EOR to CO₂ can be achieved at the Rh-SnO₂ interface in SnO₂ -Rh nanosheets (NSs). The optimized catalyst of 0.2SnO₂ -Rh NSs/C exhibits excellent alkaline EOR performance with a mass activity of 213.2 mA mg_Rh ^-1 and a Faraday efficiency of 72.8% for the C1 pathway, which are 1.7 and 1.9 times higher than those of Rh NSs/C. Mechanism studies indicate that the strong synergy at the Rh-SnO₂ interface significantly promotes the breaking of CC bond of C₂ H₅ OH to form CO₂ , and facilitates oxidation of the poisonous intermediates (^* CO and ^* CH₃ ) to suppress the deactivation of the catalyst. This work not only provides a highly selective, active, and stable catalyst for the EOR, but also promotes fundamental research for the design of efficient catalysts via interface modification.

In Situ/Operando Electrocatalyst Characterization by X-ray Absorption Spectroscopy

During the last decades, X-ray absorption spectroscopy (XAS) has become an indispensable method for probing the structure and composition of heterogeneous catalysts, revealing the nature of the active sites and establishing links between structural motifs in a catalyst, local electronic structure, and catalytic properties. Here we discuss the fundamental principles of the XAS method and describe the progress in the instrumentation and data analysis approaches undertaken for deciphering X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) spectra. Recent usages of XAS in the field of heterogeneous catalysis, with emphasis on examples concerning electrocatalysis, will be presented. The latter is a rapidly developing field with immense industrial applications but also unique challenges in terms of the experimental characterization restrictions and advanced modeling approaches required. This review will highlight the new insight that can be gained with XAS on complex real-world electrocatalysts including their working mechanisms and the dynamic processes taking place in the course of a chemical reaction. More specifically, we will discuss applications of in situ and operando XAS to probe the catalyst's interactions with the environment (support, electrolyte, ligands, adsorbates, reaction products, and intermediates) and its structural, chemical, and electronic transformations as it adapts to the reaction conditions.

Investigation of the thermal removal steps of capping agents in the synthesis of bimetallic iridium-based catalysts for the ethanol oxidation reaction

Two iridium-based catalysts (namely IrSn and IrNi) are synthesised via a polyol route involving capping agents.

A Phosphorus-Doped Ag@Pd Catalyst for Enhanced CC Bond Cleavage during Ethanol Electrooxidation

Ethanol is preferred to be oxidized into CO₂ for the construction of a high-performance direct ethanol fuel cell since this complete ethanol oxidation reaction (EOR) transfers 12 electrons. However, this EOR is sluggish and has the low activity as well as poor selectivity. To promote such a favorable EOR, more exactly the cleavage selectivity of CC bonds in ethanol, phosphorus-doped silver-core-and-Pd-shell catalysts (denoted as Ag@PdP) are designed and synthesized. In the alkaline media, a Ag@Pd₂ P_0.2 catalyst is superior toward EOR into CO₂ . It exhibits seven times higher mass activity and six times higher selectivity than the benchmark Pd/C catalyst. As confirmed by means of density functional theory calculation and in situ Fourier-transform infrared spectroscopy, such high performance stems from an increased adsorption energy of OH radicals on the Pd active sites. Meanwhile, the tensile strain effect of a core-shell structure of this Ag@Pd₂ P_0.2 catalyst favors the formation of adsorbed CH₃ CO intermediate, the key species for the enhanced C-C cleavage into CO₂ , instead of acetate. The proposed way to design and synthesize such high-performance EOR catalysts will explore the practical applications of direct alkaline ethanol fuel cells.

Promoting Effects of Au Submonolayer Shells on Structure-Designed Cu-Pd/Ir Nanospheres: Greatly Enhanced Activity and Durability for Alkaline Ethanol Electro-Oxidation

Rationally engineering the surface physicochemical properties of nanomaterials can improve their activity and durability for various electrocatalytic and energy conversion applications. Cu-Pd/Ir (CPI) nanospheres (NSs) anchored on N-doped porous graphene (NPG) [(CPI NSs/NPG)] have been recently demonstrated as a promising electrocatalyst for the alkaline ethanol oxidation reaction (EOR); to further enhance their electrocatalytic performance, the NPG-supported CPI NSs are coated with Au submonolayer (SML) shells (SMSs), through which their surface physicochemical properties can be tuned. CPI NSs/NPG is prepared by our previously developed method and possesses the special structures of composition-graded Cu₁Pd₁ and surface-doped Ir_0.03. The Au SMSs with designed surface coverages are formed via an electrochemical technology involving incomplete Cu underpotential deposition (UPD) and Au³⁺ galvanic replacement. A distinctive volcano-type relation between the EOR electrocatalytic activity and the Au-SMS surface coverage for CPI@Au_SML NSs/NPG is revealed, and the optimal CPI@Au_1/6ML NSs/NPG greatly surpasses commercial Pd/C and CPI NSs/NPG in electrocatalytic activity and noble metal utilization. More importantly, its electrocatalytic durability in 1 h chronoamperometric and 500-cycle potential cycling degradation tests is also significantly improved. According to detailed physicochemical characterizations, electrochemical analyses, and density functional theory calculations, the promoting effects of the Au SMS for enhancing the EOR electrocatalytic activity and durability of CPI NSs/NPG can be mainly attributed to the greatly weakened carbonaceous intermediate bonding and properly increased surface oxidation potential. This work also proposes a versatile and effective strategy to tune the surface physicochemical properties of metal-based nanomaterials via incomplete UPD and metal-cation galvanic replacement for advancing their electrocatalytic and energy conversion performance.

Ethanol Electrooxidation at Platinum-Rare Earth (RE = Ce, Sm, Ho, Dy) Binary Alloys

Proton exchange membrane fuel cells and direct alcohol fuel cells have been extensively studied over the last three decades or so. They have emerged as potential systems to power portable applications, providing clean energy, and offering good commercial viability. Ethanol is considered one of the most interesting fuels in this field. Herein, platinum-rare earth (Pt-RE) binary alloys (RE = Ce, Sm, Ho, Dy, nominal composition 50 at.% Pt) were produced and studied as anodes for ethanol oxidation reaction (EOR) in alkaline medium. A Pt-Dy alloy with nominal composition 40 at.% Pt was also tested. Their electrocatalytic performance was evaluated by voltammetric and chronoamperometric measurements in 2 M NaOH solution with different ethanol concentrations (0.2–0.8 M) in the 25–45 °C temperature range. Several EOR kinetic parameters were determined for the Pt-RE alloys, namely the charge transfer and diffusion coefficients, and the number of exchanged electrons. Charge transfer coefficients ranging from 0.60 to 0.69 and n values as high as 0.7 were obtained for the Pt0.5Sm0.5 electrode. The EOR reaction order at the Pt-RE alloys was found to vary between 0.4 and 0.9. The Pt-RE electrodes displayed superior performance for EOR than bare Pt, with Pt0.5Sm0.5 exhibiting the highest electrocatalytic activity. The improved electrocatalytic activity in all of the evaluated Pt-RE binary alloys suggests a strategy for the solution of the existing anode issues due to the structure-sensitive EOR.

Manipulation of Neighboring Palladium and Mercury Atoms for Efficient *OH Transformation in Anodic Alcohol Oxidation and Cathodic Oxygen Reduction Reactions

The synergetic effect of neighboring heterogeneous atoms is capable of enabling unexpected catalytic performance, and the design of a well-ordered atomic structure and elaborating the underlying interactions are crucial for the development of superior electrocatalysts in fuel cells. We demonstrate here that an ordered Pd-Hg intermetallic alloy with dimensions of several nanometers can be subtly manipulated using a mild wet-chemical reduction approach. On the basis of combined results of XPS and HAADF-STEM analysis, the adjacent regions of metallic atoms were found to be evenly occupied by heterogeneous elements from the distribution features of the surface structure. Due to charge transfer from Hg to neighboring Pd, the down-shift of the d-band center in PdHg alloys was theoretically beneficial for desorption of crucial intermediates (*OH), both in anodic ethanol oxidation reaction (EOR) and in cathodic oxygen reduction reaction (ORR). In the presence of Hg atoms with lower *OH desorption energy, the rapid dissociation of *OH from Pd facilitated the final H₂O formation, with superior ORR efficiency comparable to Pt/C catalysts. Remarkably, the rapid combination of *OH on Hg atoms with CH₃CO* on neighboring Pd atoms unambiguously favored generation of acetate ions (rate-determining) in the catalytic EOR process, resulting in a high mass activity (7.68 A per mgPd). This well-ordered atomic structure also shows excellent long-term stability in ethylene glycol oxidation reaction and ORR.

Ultra-small iridium nanoparticles as active catalysts for the selective and efficient reduction of nitroarenes

The ultra-small noble metal iridium nanoparticles (IrNPs) possessing super catalytic activity can be applied in the efficient and selective catalytic reduction of nitroarenes under mild reaction conditions for the first time.

Ir3Pb alloy nanodendrites with high performance for ethanol electrooxidation and their enhanced durability by alloying trace Au

Porous Ir₃Pb nanodendrites exhibit excellent activity and superior CO₂ selectivity for the EOR under acidic conditions, and their durability can be enhanced dramatically by alloying trace Au.

Controlled PtIr nanoalloy as an electro-oxidation platform for methanol reaction and ammonia detection

Herein, a surfactant-free, ethylene glycol-mediated synthesis of PtIr nanoalloys was optimized. In particular, a post-synthesis treatment was identified as the key step in order to determine the nanoparticles size and their organization in the nanostructure, depending on the presence of a reducing agent and on pressure conditions. After synthesis, the as-obtained nanomaterials were broadly characterized: SEM and TEM images, EDX maps and XRD spectra showed the formation of nanorods with a few nanometers size and similar quantitative compositions of platinum and iridium. Afterward, the electrocatalytic activity towards the methanol oxidation reaction of the synthesized nanomaterials was tested and the best sample, treated under a hydrogen/nitrogen flow at 10 bar, exhibits a negligible onset potential (0.058 V) and a very high If/Ib ratio (2.5). Moreover, the aforementioned sample was tested as an electrochemical sensor for the detection of small traces of ammonia in an aqueous solution with a limit of detection of 4.88 μM. The sensor was tested also in simulated wastewater coming from the fertilizer industry, showing proper operation and excellent selectivity.

A review of the antimicrobial potential of precious metal derived nanoparticle constructs

The field of nanotechnology is rapidly growing. The promise of pharmacotherapeutics emerging from this vast field has drawn the attention of many researchers. However, with the increase in the prevalence of antibiotic resistant microorganisms, the manifestations of these promises are needed now more than ever. Many have postulated the antimicrobial potential of nanoparticle constructs derived from precious metals/noble metals nanoparticles (NMNPs), such as silver nanoparticles that show activity against multidrug resistant bacteria. In this review we will evaluate the current studies and explore the data to obtain a clear picture of the potential of these particles and the validity of the claims of drug resistant treatments with NMNPs.

Spectroscopy Identification of the Bimetallic Surface of Metal-Organic Framework-Confined Pt-Sn Nanoclusters with Enhanced Chemoselectivity in Furfural Hydrogenation

Research and development in bimetallic nanoparticles have gained great interest over their monometallic counterparts because of their distinct and unique properties in a wide range of applications such as catalysis, energy storage, and bio/plasmonic imaging. Identification and characterization of these bimetallic surfaces for application in heterogeneous catalysis remain a challenge and heavily rely on advanced characterization techniques such as aberration-corrected electron microscopy and synchrotron X-ray absorption studies. In this article, we have reported a strategy to prepare sub-2 nm bimetallic Pt-Sn nanoclusters confined in the pores of a Zr-based metal-organic framework (MOF). The Pt-Sn nanoclusters encapsulated in the Zr-MOF pores show enhanced chemoselectivity from 51 to 93% in an industrially relevant reaction, furfural hydrogenation to furfuryl alcohol. The presence of bimetallic Pt-Sn surfaces was investigated by a surface-sensitive characterization technique utilizing diffuse reflectance infrared Fourier transform spectroscopy of adsorbed CO to probe the bimetallic surface of the encapsulated ultrafine Pt-Sn nanocluster. Complementary techniques such as aberration-corrected high-angle annular dark-field scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy were also used to characterize the Pt-Sn nanoclusters.

Nanocatalysts for Electrocatalytic Oxidation of Ethanol

The use of ethanol as a fuel in direct alcohol fuel cells depends not only on its ease of production from renewable sources, but also on overcoming the challenges of storage and transportation. In an ethanol-based fuel cell, highly active electrocatalysts are required to break the C-C bond in ethanol for its complete oxidation at lower overpotentials, with the aim of increasing the cell performance, ethanol conversion rates, and fuel efficiency. In recent decades, the development of wet-chemistry methods has stimulated research into catalyst design, reactivity tailoring, and mechanistic investigations, and thus, created great opportunities to achieve efficient oxidation of ethanol. In this Minireview, the nanomaterials tested as electrocatalysts for the ethanol oxidation reaction in acid or alkaline environments are summarized. The focus is mainly on nanomaterials synthesized by using wet-chemistry methods, with particular attention on the relationship between the chemical and physical characteristics of the catalysts, for example, catalyst composition, morphology, structure, degree of alloying, presence of oxides or supports, and their activity for ethanol electro-oxidation. As potential alternatives to noble metals, non-noble-metal catalysts for ethanol oxidation are also briefly reviewed. Insights into further enhancing the catalytic performance through the design of efficient electrocatalysts are also provided.

Pt-Based Catalysts for Electrochemical Oxidation of Ethanol

Despite its attractive features as a power source for direct alcohol fuel cells, utilization of ethanol is still hampered by both fundamental and technical challenges. The rationale behind the slow and incomplete ethanol oxidation reaction (EOR) with low selectivity towards CO₂ on most Pt-based catalysts is still far from being understood, and a number of practical problems need to be addressed before an efficient and low-cost catalyst is designed. Some recent achievements towards solving these problems are presented. Pt film electrodes and Pt monolayer (Pt_ML) electrodes on various single crystal substrates showed that EOR follows the partial oxidation pathway without C-C bond cleavage, with acetic acid and acetaldehyde as the final products. The role of the substrate lattice on the catalytic properties of Pt_ML was proven by the choice of appropriate M(111) structure (M = Pd, Ir, Rh, Ru and Au) showing enhanced kinetics when Pt_ML is under tensile strain on Au(111) electrode. Nanostructured electrocatalysts containing Pt-Rh solid solution on SnO₂ and Pt monolayer on non-noble metals are shown, optimized, and characterized by in situ methods. Electrochemical, in situ Fourier transform infrared (FTIR) and X-ray absorption spectroscopy (XAS) techniques highlighted the effect of Rh in facilitating C-C bond splitting in the ternary PtRh/SnO₂ catalyst. In situ FTIR proved quantitatively the enhancement in the total oxidation pathway to CO₂, and in situ XAS confirmed that Pt and Rh form a solid solution that remains in metallic form through a wide range of potentials due to the presence of SnO₂. Combination of these findings with density functional theory calculations revealed the EOR reaction pathway and the role of each constituent of the ternary PtRh/SnO₂ catalyst. The optimal Pt:Rh:Sn atomic ratio was found by the two in situ techniques. Attempts to replace Rh with cost-effective alternatives for commercially viable catalysts has shown that Ir can also split the C-C bond in ethanol, but the performance of optimized Pt-Rh-SnO₂ is still higher than that of the Pt-Ir-SnO₂ catalyst.

Monodisperse ordered indium-palladium nanoparticles: synthesis and role of indium for boosting superior electrocatalytic activity for ethanol oxidation reaction

The slow kinetics of ethanol oxidation reaction (EOR) has limited its widespread use for fuel cells. Bimetallic catalysts with optimized surface compositions can considerably govern rate-determining steps through selectivity for CH3COOH formation or by facilitating the adsorption of OHadsvia the bifunctional effect of an alloy to increase the EOR's kinetic rates. Here, we reported monodisperse ordered In-Pd nanoparticles as new bimetallic high-performance catalysts for EOR. In-Pd nanoparticles, i.e., In3Pd2 and In3Pd5 were prepared using arrested precipitation in solution, and their composition, structures, phase and crystallinity were confirmed using a variety of analyses including TEM, XPS, EDS and XRD. In-Pd nanoparticles were loaded on carbon black (Vulcan XC-72) as electrocatalysts for EOR in alkaline media. In3Pd2 and In3Pd5 nanoparticles exhibited 5.8 times and 4.0 times higher mass activities than commercial Pd/C, which showed that the presence of indium greatly boosts electrocatalytic reactivity for EOR of Pd catalysts. This performance is the best among those of bimetallic nanoparticles reported to date. Such high performance of In-Pd nanoparticles may be attributed to the following two reasons. First, In-Pd nanoparticles exhibited excellent CO anti-poison ability, as confirmed by CO striping experiments. Second, as revealed by DFT calculations of metals with OHads adsorption, In atoms on In3Pd2 surface exhibited the lowest energy (-1.659 eV) for OHads adsorption as compared to other common oxophilic metals including Sn, SnPt, Ag, Ge, Co, Pb, and Cu. We propose that the presence of indium sites promoted efficient free OH radical adsorption on indium sites and resulted in a faster reaction rate of acetate formation from acetaldehyde (the rate determining step for EOR on Pd sites). Finally, a single direct ethanol fuel cell (DEFC) with Pd/C anode was prepared. Compared to the results for a commercial Pd/C anode, the open circuit voltage (OCV) of In3Pd2/C improved by 0.25 V (from 0.64 to 0.89 V) and the power density improved by ∼80% (from 3.7 to 6.7 mW cm-2), demonstrating its practical uses as Pt or Pd catalyst alternatives for DEFC.

Self-recoverable Pd-Ru/TiO2 nanocatalysts with ultrastability towards ethanol electrooxidation

Self-recoverable Pd-Ru/TiO2 nanocatalysts have been prepared by electrochemical stripping of Pd-Ru/TiO2 precursors. For the ethanol oxidation reaction (EOR), these Pd-Ru/TiO2 nanocatalysts are used as an anode catalyst. The characterization of catalysts via chronoamperometry has been repeated 15 times. After 15 stability tests, the Pd1Ru0.69/TiO2 nanocatalysts still achieve a factor of 9.4 enhancement at the residual current density (309.42 mA mgPd-1) for the EOR over commercial Pd/C catalysts (33.01 mA mgPd-1). From the 5th to 15th test, when each 10 000 s stability test is performed in a fresh ethanol electrolyte, the initial and residual current density of the catalysts could recover to the original or even better value in a few hours before performing another 10 000 s stability test. Herein, these Pd-Ru/TiO2 nanocatalysts with ultrastability towards ethanol electrooxidation are self-recoverable. Density functional theory calculations reveal that the introduction of oxophilic metal Ru and a TiO2 support into Pd-based catalysts and the synergistic effects between Ru and TiO2 have led to the ultrastability towards the EOR. The introduction of oxophilic metal Ru and a TiO2 support into catalysts can reduce the adsorption energy of OHads on the Pd-Ru/TiO2 nanocatalysts, and it will inhibit the COads produced and adsorbed on the Pd surface.

Black Phosphorus-Graphene Heterostructure-Supported Pd Nanoparticles with Superior Activity and Stability for Ethanol Electro-oxidation

Rational design supporting material for palladium (Pd)-based catalyst can maximize its electrocatalytic performance for ethanol oxidation reaction (EOR) catalyst in alkaline condition. Utilizing the unique two-dimensional structures and outstanding physicochemical property of graphene and black phosphorus (BP), herein, we proposed and designed a black phosphorus-graphene heterostructure for supporting Pd nanoparticles. Through merely ball-milling of activated graphene (AG) and black phosphorus (BP), the AG-BP hybrid with a linkage of P-C bonding is used as supports of Pd. The obtained Pd/AG-BP hybrid exhibits ultrahigh electrochemical activity toward EOR. Remarkably, it can achieve a high mass peak current density of ∼6004.53 and ∼712.03 mA mg_Pd^-1 before and after the durability tests of 20 000s on EOR, which are ∼7.19 and 80 times higher than those of commercial Pd/C. The experimental analysis and density-functional-theory calculation show that Pd becomes more positive with electrons transfer from Pd to AG-BP supports and is liable to absorb the OH radicals for removing CO_ads intermediate to release active sites on EOR, together with the excellent ability to generate additional OH militants after combining with the AG-BP heterostructure.

Understanding small-molecule electro-oxidation on palladium based compounds – a feature on experimental and theoretical approaches

Electrochemical oxidation of small molecules such as ethanol, methanol and formic acid on Pd based compounds has a great impact on green energy production in fuel cells.

Ultrathin Vein-Like Iridium-Tin Nanowires with Abundant Oxidized Tin as High-Performance Ethanol Oxidation Electrocatalysts

Iridium (Ir) holds great promise for ethanol oxidation reaction (EOR), while its practical applications suffer from the limited shape-controlled synthesis due to its low-energy barrier for nucleation. To overcome this limitation, the preparation of a new class of ultrathin vein-like Ir-tin nanowires (IrSn NWs) with abundant oxidized Sn is reported. By tuning the ratio of Ir to Sn, the optimized Ir₆₇ Sn₃₃ /C exhibits the highest mass density of 95.6 mA mg^-1 Ir for EOR at low potential (0.04 V), which is 4.1-fold and 20-fold higher than that of Ir/C and the commercial Pt/C, respectively. It also exhibits the smallest Tafel slope of 153 mV dec^-1 and superior stability after 2 h chronoamperometric measurement. Electrochemical measurements and X-ray photoelectron spectra results confirm that the abundant oxidized Sn promotes a complete oxidization of ethanol into CO₂ at low potential. This work highlights the importance of non-noble metal on enhancing the EOR performance.

Improved ethanol electrooxidation performance by shortening Pd-Ni active site distance in Pd-Ni-P nanocatalysts

Incorporating oxophilic metals into noble metal-based catalysts represents an emerging strategy to improve the catalytic performance of electrocatalysts in fuel cells. However, effects of the distance between the noble metal and oxophilic metal active sites on the catalytic performance have rarely been investigated. Herein, we report on ultrasmall (∼5 nm) Pd–Ni–P ternary nanoparticles for ethanol electrooxidation. The activity is improved up to 4.95 A per mg_Pd, which is 6.88 times higher than commercial Pd/C (0.72 A per mg_Pd), by shortening the distance between Pd and Ni active sites, achieved through shape transformation from Pd/Ni–P heterodimers into Pd–Ni–P nanoparticles and tuning the Ni/Pd atomic ratio to 1:1. Density functional theory calculations reveal that the improved activity and stability stems from the promoted production of free OH radicals (on Ni active sites) which facilitate the oxidative removal of carbonaceous poison and combination with CH₃CO radicals on adjacent Pd active sites.

Incorporating oxophilic metals into noble metal catalysts can improve electrocatalytic performance; however, the influence of the distance between noble metal and oxophilic metal active site is not well understood. Here the authors make Pd–Ni–P nanocatalysts for ethanol oxidation, with improved performance achieved by shortening the Pd–Ni distance.

Single-Step Electrophoretic Deposition of Non-noble Metal Catalyst Layer with Low Onset Voltage for Ethanol Electro-oxidation

A single-step electrophoretic deposition (EPD) process is used to fabricate catalyst layers which consist of nickel oxide nanoparticles attached on the surface of nanographitic flakes. Magnesium ions present in the colloid charge positively the flake's surface as they attach on it and are also used to bind nanographitic flakes together. The fabricated catalyst layers showed a very low onset voltage (-0.2 V vs Ag/AgCl) in the electro-oxidation of ethanol. To clarify the occurring catalytic mechanism, we performed annealing treatment to produce samples having a different electrochemical behavior with a large onset voltage. Temperature dependence measurements of the layer conductivity pointed toward a charge transport mechanism based on hopping for the nonannealed layers, while the drift transport is observed in the annealed layers. The hopping charge transport is responsible for the appearance of the low onset voltage in ethanol electro-oxidation.

Core-shell nanoparticles: synthesis and applications in catalysis and electrocatalysis

Core-shell nanoparticles (CSNs) are a class of nanostructured materials that have recently received increased attention owing to their interesting properties and broad range of applications in catalysis, biology, materials chemistry and sensors. By rationally tuning the cores as well as the shells of such materials, a range of core-shell nanoparticles can be produced with tailorable properties that can play important roles in various catalytic processes and offer sustainable solutions to current energy problems. Various synthetic methods for preparing different classes of CSNs, including the Stöber method, solvothermal method, one-pot synthetic method involving surfactants, etc., are briefly mentioned here. The roles of various classes of CSNs are exemplified for both catalytic and electrocatalytic applications, including oxidation, reduction, coupling reactions, etc.

Understanding Au∼98Ag∼46(SR)60 nanoclusters through investigation of their electronic and local structure by X-ray absorption fine structure

Synchrotron radiation-based X-ray absorption fine structure (XAFS) of thiol-stabilized Au_∼98Ag_∼46(SR)₆₀ nanoclusters suggests that Au atoms preferred to occupy the metal core sites while the Ag atoms were mainly on the surface.