On-Demand Electrochemical Activation of the Click Reaction on Self-Assembled Monolayers on Gold Presenting Masked Acetylene Groups

Electrochemical Activation of Self-Assembled Monolayers for the Binding of Effectors

A self-assembled monolayer (SAM) on gold was prepared from a diaminoterephthalate (DAT) derivative as functional molecule and 1-decanthiol as a backfiller. The DAT derivative is N-protected by a tert-butyloxycarbonyl (Boc) group and is anchored to the gold surface via a liponic acid as a stable anchor group. The terminal DAT moiety exhibits interesting effector properties such as fluorescence and electrochemical activity. Irreversible oxidation of the monolayer at 0.4 V (Hg|Hg₂SO₄) in 0.1 M HClO₄ triggers deprotection of the DAT group and subsequent chemical reactions, during which 10% of the DAT groups of the original SAM are transformed to a new surface-bound, quasi-reversible redox couple with a formal potential of 0.0 V (Hg|Hg₂SO₄) and a standard rate constant of 8 s^-1 in 0.1 M HClO₄. Immersion of the mixed SAM in 0.1 M HClO₄ at open circuit potential or oxidation in 0.1 M H₂SO₄ did not produce this surface-bound redox couple. The monolayers were thoroughly characterized by X-ray photoelectron spectroscopy (XPS) and polarization modulation infrared reflection absorption spectroscopy (PM IRRAS) after the different preparation steps indicating only minor changes in the overall composition of the monolayer, in particular, the preservation of the heteroatoms. The new redox couple is likely a diimine, in agreement with its ability to bind nucleophiles such as anilines by conjugate addition that could be followed by multicycle voltammetry and XPS. The DAT effector group is especially interesting because it can also report the binding reaction by changed electrochemical and fluorescence signals.

Investigation of Au SAMs Photoclick Derivatization by PM-IRRAS

In this work, we present a clean one-step process for modifying headgroups of self-assembled monolayers (SAMs) on gold using photo-enabled click chemistry. A thiolated, cyclopropenone-caged strained alkyne precursor was first functionalized onto a flat gold substrate through self-assembly. Exposure of the cyclopropenone SAM to UVA light initiated the efficient photochemical decarbonylation of the cyclopropenone moiety, revealing the strained alkyne capable of undergoing the interfacial strain-promoted alkyne-azide cycloaddition (SPAAC). Irradiated SAMs were derivatized with a series of model azides with varied hydrophobicity to demonstrate the generality of this chemical system for the modification and fine-tuning of the surface chemistry on gold substrates. SAMs were characterized at each step with polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) to confirm the successful functionalization and reactivity. Furthermore, to showcase the compatibility of this approach with biochemical applications, cyclopropenone SAMs were irradiated and modified with azide-bearing cell adhesion peptides to promote human fibroblast cell adhesion, and then imaged by live-cell fluorescence microscopy. Thus, the "photoclick" methodology reported here represents an improved, versatile, catalyst-free protocol that allows for a high degree of control over the modification of material surfaces, with applicability in materials science as well as biochemistry.

Electrochemical synthesis of copper(i) acetylides via simultaneous copper ion and catalytic base electrogeneration for use in click chemistry

We report an efficient and sustainable electrochemical synthesis of copper(i) acetylides using simultaneous copper oxidation and Hofmann elimination of quaternary ammonium salts.

Robust Surface Plasmon Resonance Chips for Repetitive and Accurate Analysis of Lignin-Peptide Interactions

We have developed novel surface plasmon resonance (SPR) sensor chips whose surfaces bear newly synthesized functional self-assembled monolayer (SAM) anchoring lignin through covalent chemical bonds. The SPR sensor chips are remarkably robust and suitable for repetitive and accurate measurement of noncovalent lignin-peptide interactions, which is of significant interest in the chemical or biochemical conversion of renewable woody biomass to valuable chemical feedstocks. The lignin-anchored SAMs were prepared for the first time by click chemistry based on an azide-alkyne Huisgen cycloaddition: mixed SAMs are fabricated on gold thin film using a mixture of alkynyl and methyl thioalkyloligo(ethylene oxide) disulfides and then reacted with azidated milled wood lignins to furnish the functional SAMs anchoring lignins covalently. The resulting SAMs were characterized using infrared reflection-absorption, Raman, and X-ray photoelectron spectroscopies to confirm covalent immobilization of the lignins to the SAMs via triazole linkages and also to reveal that the SAM formation induces a helical conformation of the ethylene oxide chains. Further, SPR measurements of the noncovalent lignin-peptide interactions using lignin-binding peptides have demonstrated high reproducibility and durability of the prepared lignin-anchored sensor chips.

Multifunctional Electrochemical Platforms Based on the Michael Addition/Schiff Base Reaction of Polydopamine Modified Reduced Graphene Oxide: Construction and Application

In this paper, a new strategy for the construction of multifunctional electrochemical detection platforms based on the Michael addition/Schiff base reaction of polydopamine modified reduced graphene oxide was first proposed. Inspired by the mussel adhesion proteins, 3,4-dihydroxyphenylalanine (DA) was selected as a reducing agent to simultaneously reduce graphene oxide and self-polymerize to obtain the polydopamine-reduced graphene oxide (PDA-rGO). The PDA-rGO was then functionalized with thiols and amines by the reaction of thiol/amino groups with quinine groups of PDA-rGO via the Michael addition/Schiff base reaction. Several typical compounds containing thiol and/or amino groups such as 1-[(4-amino)phenylethynyl] ferrocene (Fc-NH2), cysteine (cys), and glucose oxidase (GOx) were selected as the model molecules to anchor on the surface of PDA-rGO using the strategy for construction of multifunctional electrochemical platforms. The experiments revealed that the composite grafted with ferrocene derivative shows excellent catalysis activity toward many electroactive molecules and could be used for individual or simultaneous detection of dopamine hydrochloride (DA) and uric acid (UA), or hydroquinone (HQ) and catechol (CC), while, after grafting of cysteine on PDA-rGO, simultaneous discrimination detection of Pb(2+) and Cd(2+) was realized on the composite modified electrode. In addition, direct electron transfer of GOx can be observed when GOx-PDA-rGO was immobilized on glassy carbon electrode (GCE). When glucose was added into the system, the modified electrode showed excellent electric current response toward glucose. These results inferred that the proposed multifunctional electrochemical platforms could be simply, conveniently, and effectively regulated through changing the anchored recognition or reaction groups. This study would provide a versatile method to design more detection or biosensing platforms through a chemical reaction strategy in the future.

Synthesis, self-assembly, and degradation of amphiphilic triblock copolymers with fully photodegradable hydrophobic blocks

The development of stimuli-responsive materials is of significant interest for many applications including drug delivery, medical imaging, sensors, and microfluidic devices. Among the available stimuli, light is particularly attractive as it can be applied with high spatial and temporal resolution. We describe here the synthesis of amphiphilic triblock copolymers composed of poly(ethylene glycol) and a hydrophobic block containing o-nitrobenzyl esters throughout the backbone using copper-catalyzed azide–alkyne cycloaddition chemistry. These materials were designed to have a high weight fraction of the hydrophobic block to favour nonmicellar aggregates. The self-assembly in water was studied using nanoprecipitation and the resulting assemblies were characterized by dynamic light scattering and transmission electron microscopy. Under optimized conditions, it was possible to prepare polymer vesicles, commonly referred to as polymersomes, with diameters of approximately 100 nm. The degradation of these materials in response to UV light was studied by spectroscopy, light scattering, and electron microscopy, demonstrating that the vesicles were broken down. These results suggest the potential of these materials for applications such as encapsulation and release.

Determination of self-exchange rate of alkanethiolates in self-assembled monolayers on gold using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In this paper, we describe a new method for determining the exchange rates of alkanethiolates in self-assembled monolayers (SAMs) on gold using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) to analyze the compositions of the alkanethiolate in SAMs rapidly and directly. In particular, to investigate the self-exchange of alkanethiols, we prepared a deuterated alkanethiol that has the same molecular properties as the non-deuterated alkanethiol but a different molecular weight. SAMs consisting of deuterated alkanethiolates were immersed in a solution of the non-deuterated alkanethiol, and the influences of the immersion time, temperature, concentration, and solvent on the self-exchange rates were investigated. Furthermore, we assessed the exchange rates among alkanethiols with different carbon chain lengths and different size of ethylene glycol units. In addition, we performed molecular dynamics simulations using a model SAM system in order to understand the molecular mechanism of the exchange process.

Are glycan biosensors an alternative to glycan microarrays?

Complex carbohydrates (glycans) play an important role in nature and study of their interaction with proteins or intact cells can be useful for understanding many physiological and pathological processes. Such interactions have been successfully interrogated in a highly parallel way using glycan microarrays, but this technique has some limitations. Thus, in recent years glycan biosensors in numerous progressive configurations have been developed offering distinct advantages compared to glycan microarrays. Thus, in this review advances achieved in the field of label-free glycan biosensors are discussed.

Nanoscale controlled architecture for development of ultrasensitive lectin biosensors applicable in glycomics

In this Minireview the most advanced patterning protocols and transducing schemes for development of ultrasensitive label-free and label-based lectin biosensors for glycoprofiling of disease markers and some cancerous cells are described. Performance of such lectin biosensors with interfacial properties tuned at a nanoscale are critically compared to the most sensitive immunoassay format of analysis and challenges ahead in the field are discussed. Moreover, key elements for future advances of such devices on the way to enhance robustness and practical applicability of lectin biosensors are revealed.

About supramolecular systems for dynamically probing cells

This article reviews the state of the art in the development of strategies for generating supramolecular systems for dynamic cell studies. Dynamic systems are crucial to further our understanding of cell biology and are consequently at the heart of many medical applications. Increasing interest has therefore been focused recently on rendering systems bioactive and dynamic that can subsequently be employed to engage with cells. Different approaches using supramolecular chemistry are reviewed with particular emphasis on their application in cell studies. We conclude with an outlook on future challenges for dynamic cell research and applications.

“Click” reactions: a versatile toolbox for the synthesis of peptide-conjugates

Peptides that comprise the functional subunits of proteins have been conjugated to versatile materials (biomolecules, polymers, surfaces and nanoparticles) in an effort to modulate cell responses, specific binding affinity and/or self-assembly behavior.

Switchable substrates for analyzing and engineering cellular functions

Cellular activity is highly dependent on the extracellular environment, which is composed of surrounding cells and extracellular matrices. This focus review summarizes recent advances in chemically and physically engineered switchable substrates designed to control such cellular microenvironments by application of an external stimulus. Special attention is given to their molecular design, switching strategies, and representative examples for bioanalytical and biomedical applications.

Structure-activity relationships for biodistribution, pharmacokinetics, and excretion of atomically precise nanoclusters in a murine model

The absorption, distribution, metabolism and excretion (ADME) and pharmacokinetic (PK) properties of inorganic nanoparticles with hydrodynamic diameters between 2 and 20 nm are presently unpredictable. It is unclear whether unpredictable in vivo properties and effects arise from a subset of molecules in a nanomaterials preparation, or if the ADME/PK properties are ensemble properties of an entire preparation. Here we characterize the ADME/PK properties of atomically precise preparations of ligand protected gold nanoclusters in a murine model system. We constructed atomistic models and tested in vivo properties for five well defined compounds, based on crystallographically resolved Au25(SR)18 and Au102(SR)44 nanoclusters with different (SR) ligand shells. To rationalize unexpected distribution and excretion properties observed for several clusters in this study and others, we defined a set of atomistic structure-activity relationships (SAR) for nanoparticles, which includes previously investigated parameters such as particle hydrodynamic diameter and net charge, and new parameters such as hydrophobic surface area and surface charge density. Overall we find that small changes in particle formulation can provoke dramatic yet potentially predictable changes in ADME/PK.

Investigation of an electrochemically switched heterocyclization reaction on gold surface

We report an investigation of an electrochemically switched heterocyclization reaction on hydroquinone-terminated self-assembled monolayers (SAMs). This reaction involves an electrochemically modulated hydroquinone/benzoquinone transformation step in the SAMs and a subsequent heterocyclization step taking place between the electrochemically generated benzoquinone moieties in SAMs and l-cysteine in solution. The reaction process was monitored by XPS and electrochemical surface-enhanced Raman spectroscopy (EC-SERS). The surface reaction proceeds as a two-step reaction to give a benzothiazine product, which is in contrast to the much more complicated multiple step reactions in solution. This result suggests that the tight molecular packing in the SAMs does not hinder the intramolecular heterocylization reaction, but prevents the intermolecular coupling reaction from happening. This work provides insights to the control and detection of biomolecule related multistep reactions occurring at solid-liquid interface.

Preparation of gradient surfaces by using a simple chemical reaction and investigation of cell adhesion on a two-component gradient

This article describes a simple method for the generation of multicomponent gradient surfaces on self-assembled monolayers (SAMs) on gold in a precise and predictable manner, by harnessing a chemical reaction on the monolayer, and their applications. A quinone derivative on a monolayer was converted to an amine through spontaneous intramolecular cyclization following first-order reaction kinetics. An amine gradient on the surface on a scale of centimeters was realized by modulating the exposure time of the quinone-presenting monolayer to the chemical reagent. The resulting amine was used as a chemical handle to attach various molecules to the monolayer with formation of multicomponent gradient surfaces. The effectiveness of this strategy was verified by cyclic voltammetry (CV), matrix assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry (MS), MS imaging, and contact-angle measurements. As a practical application, cell adhesion was investigated on RGD/PHSRN peptide/peptide gradient surfaces. Peptide PHSRN was found to synergistically enhance cell adhesion at the position where these two ligands are presented in equal amounts, while these peptide ligands were competitively involved in cell adhesion at other positions. This strategy of generating a gradient may be further expandable to the development of functional gradient surfaces of various molecules and materials, such as DNA, proteins, growth factors, and nanoparticles, and could therefore be useful in many fields of research and practical applications.