Structure and Electronic Configurations of the Intermediates of Water Oxidation in Blue Ruthenium Dimer Catalysis

Pentanuclear iron complex for water oxidation: spectroscopic analysis of reactive intermediates in solution and catalyst immobilization into the MOF-based photoanode

Photoelectrochemical water splitting can produce green hydrogen for industrial use and CO2-neutral transportation, ensuring the transition from fossil fuels to green, renewable energy sources. The iron-based electrocatalyst [FeII4FeIII(μ-3-O)(μ-L)6]3+ (LH = 3,5-bis(2-pyridyl)pyrazole) (1), discovered in 2016, is one of the fastest molecular water oxidation catalysts (WOC) based on earth-abundant elements. However, its water oxidation reaction mechanism has not been yet fully elucidated. Here, we present in situ X-ray spectroscopy and electron paramagnetic resonance (EPR) analysis of electrochemical water oxidation reaction (WOR) promoted by (1) in water-acetonitrile solution. We observed transient reactive intermediates during the in situ electrochemical WOR, consistent with a coordination sphere expansion prior to the onset of catalytic current. At a pre-catalytic (~+1.1 V vs. Ag/AgCl) potential, the distinct g~2.0 EPR signal assigned to FeIII/FeIV interaction was observed. Prolonged bulk electrolysis at catalytic (~+1.6 V vs. Ag/AgCl) potential leads to the further oxidation of Fe centers in (1). At the steady state achieved with such electrolysis, the formation of hypervalent FeV=O and FeIV=O catalytic intermediates was inferred with XANES and EXAFS fitting, detecting a short Fe=O bond at ~1.6 Å. (1) was embedded into MIL-126 MOF with the formation of (1)-MIL-126 composite. The latter was tested in photoelectrochemical WOR and demonstrated an improvement of electrocatalytic current upon visible light irradiation in acidic (pH=2) water solution. The presented spectroscopic analysis gives further insight into the catalytic pathways of multinuclear systems and should help the subsequent development of more energy- and cost-effective catalysts of water splitting based on earth-abundant metals. Photoelectrocatalytic activity of (1)-MIL-126 confirms the possibility of creating an assembly of (1) inside a solid support and boosting it with solar irradiation towards industrial applications of the catalyst.

Atomic-Scale Elucidation of Unusually Distorted Dimeric Complexes Confined in a Zr-Based Metal-Organic Framework

Nanoconfinement in metal-organic framework (MOF) pores can lead to the isolation of unusual or reactive metal complexes. However, MOFs that support the stabilization and precise structural elucidation of metal complexes and small metal clusters are rare. Here, we report a thermally and chemically stable zirconium-based MOF (University of Adelaide Material-1001, UAM-1001) with a high density of free bis-pyrazolyl units that can confine mono- and dinuclear metal complexes. The precursor MOF, UAM-1000, has a high degree of structural flexibility, but post synthetic modification with a bracing linker, biphenyl-4,4'-dicarboxylic acid, partially rigidifies the MOF (UAM-1001). This allows "matrix isolation" and detailed structural elucidation of postsynthetically added dimeric complexes bound within a tetradentate binding site formed by two linkers. Dimeric species [Co2Cl4], [Cu2Cl4], [Ni2Cl3(H2O)2]Cl, and [Rh2(CO)3Cl2] were successfully isolated in UAM-1001 and characterized by single-crystal X-ray diffraction. Comparison of the UAM-1001 isolated species with similar complexes in the solid state reveals that UAM-1001 can significantly distort the structures and enforce notably shorter metal-metal distances. For example, MOF tethering allows isolation of a [Cu2Cl4] complex that rapidly reacts with water in the solid state. The stability, porosity, and modulated flexibility of UAM-1001 provide an ideal platform material for the isolation and study of new dimeric complexes and their reactivity.

Engineering a molecular ruthenium catalyst into three-dimensional metal covalent organic frameworks for efficient water oxidation

The water oxidation reaction plays an important role in clean energy conversion, utilization, and storage, but mimicking the oxygen-evolving complex of photosystem II for designing active and stable water oxidation catalysts (WOCs) is still an appealing challenge. Here, we innovatively engineered a molecular ruthenium WOC as a metal complex building unit to construct a series of three-dimensional metal covalent organic frameworks (3D MCOFs) for realizing efficient oxidation catalysis. The resultant MCOFs possessed rare 3D interlocking structures with inclined interpenetration of two-dimensional covalent rhombic nets, and the Ru sites were periodically arranged in the crystalline porous frameworks. Impressively, these MCOFs showed excellent performance towards water oxidation (the O2 evolution rate is as high as 2830 nmol g-1 s-1) via the water nucleophilic attack pathway. Besides, the MCOFs were also reactive for oxidizing organic substrates. This work highlights the potential of MCOFs as a designable platform in integrating molecular catalysts for various applications.

Systematic Influence of Electronic Modification of Ligands on the Catalytic Rate of Water Oxidation by a Single-Site Ru-Based Catalyst

Catalytic water oxidation is an important process for the development of clean energy solutions and energy storage. Despite the significant number of reports on active catalysts, systematic control of the catalytic activity remains elusive. In this study, descriptors are explored that can be correlated with catalytic activity. [Ru(tpy)(pic)₂ (H₂ O)](NO₃ )₂ and [Ru(EtO-tpy)(pic)₂ (H₂ O)](NO₃ )₂ (where tpy=2,2' : 6',2"-terpyridine, EtO-tpy=4'-(ethoxy)-2,2':6',2"-terpyridine, pic=4-picoline) are synthesized and characterized by NMR, UV/Vis, EPR, resonance Raman, and X-ray absorption spectroscopy, and electrochemical analysis. Addition of the ethoxy group increases the catalytic activity in chemically driven and photocatalytic water oxidation. Thus, the effect of the electron-donating group known for the [Ru(tpy)(bpy)(H₂ O)]²⁺ family is transferable to architectures with a tpy ligand trans to the Ru-oxo unit. Under catalytic conditions, [Ru(EtO-tpy)(pic)₂ (H₂ O)](NO₃ )₂ displays new spectroscopic signals tentatively assigned to a peroxo intermediate. Reaction pathways were analyzed by using DFT calculations. [Ru(EtO-tpy)(pic)₂ (H₂ O)](NO₃ )₂ is found to be one of the most active catalysts functioning by a water nucleophilic attack mechanism.

XAS and EPR in Situ Observation of Ru(V) Oxo Intermediate in a Ru Water Oxidation Complex**

In this study, we combine in situ spectroelectrochemistry coupled with electron paramagnetic resonance (EPR) and X‐ray absorption spectroscopies (XAS) to investigate a molecular Ru‐based water oxidation catalyst bearing a polypyridinic backbone [Ru^II(OH₂)(Py₂Metacn)]²⁺. Although high valent key intermediate species arising in catalytic cycles of this family of compounds have remain elusive due to the lack of additional anionic ligands that could potentially stabilize them, mechanistic studies performed on this system proposed a water nucleophilic attack (WNA) mechanism for the O−O bond formation. Employing in situ experimental conditions and complementary spectroscopic techniques allowed to observe intermediates that provide support for a WNA mechanism, including for the first time a Ru(V) oxo intermediate based on the Py₂Metacn ligand, in agreement with the previously proposed mechanism.

Synthesis of Carbonato- and Doubly Oxido-Bridged Diruthenium(III,IV) Complex and Reactions with Cations

Doubly oxido-bridged transition metal moieties, {M₂(μ-O)₂}, play important roles as oxidation reaction centers in nature. This work features a diruthenium(III,IV) complex with a doubly oxido-bridged core {Ru₂^III,IV(μ-O)₂}³⁺ with a carbonato bridged between the two ruthenium centers, M[{Ru^III,IV(ebpma)}₂(μ-O)₂(μ-O₂CO)]₂(PF₆)₃ (M[1_CO3]₂(PF₆)₃; Carbonato complex, ebpma; ethylbis(2-pyridymethyl)amine), and explores the interactions of this complex with cations (H⁺ and M⁺). M[1_CO3]₂(PF₆)₃ was formed via reactions of a singly oxido-bridged complex, [{Ru^III,IVCl₂(ebpma)}₂(μ-O)]PF₆·(CH₃)₂CO, with M₂CO₃ (M = K, Na) or with CO₂(g), adjusted to around pH 12 with NaOH(aq.), in a water-acetone mixed solvent. The Carbonato complex was isolated as a powder in the form of M[1_CO3]₂(PF₆)₃ (M = K, Na), because of the interactions between the carbonato moiety and K⁺ or Na⁺ in the solid structure. In acidic aqueous solutions, unexpectedly, the carbonato ligand remained bound to the doubly bridged core, {Ru₂^III,IV(μ-O)₂}³⁺ or {Ru₂^III,IV(μ-O)(μ-OH)}⁴⁺, without decarboxylation even under pH 1.0. Two-step one-protonation/deprotonation occurred reversibly between pH 1.0 and 13.2 to the bridging oxido and carbonato ligands. The structures of the corresponding one- and two-protonated complexes ([1_CO3H]²⁺ and [1_CO32H]³⁺) were successfully characterized.

Na3[Ru2(µ-CO3)4] as a Homogeneous Catalyst for Water Oxidation; HCO3− as a Co-Catalyst

In neutral medium (pH 7.0) [RuIIIRuII(µ-CO3)4(OH)]4− undergoes one electron oxidation to form [RuIIIRuIII(µ-CO3)4(OH)2]4− at an E1/2 of 0.85 V vs. NHE followed by electro-catalytic water oxidation at a potential ≥1.5 V. When the same electrochemical measurements are performed in bicarbonate medium (pH 8.3), the complex first undergoes one electron oxidation at an Epa of 0.86 V to form [RuIIIRuIII(µ-CO3)4(OH)2]4−. This complex further undergoes two step one electron oxidations to form RuIVRuIII and RuIVRuIV species at potentials (Epa) 1.18 and 1.35 V, respectively. The RuIVRuIII and RuIVRuIV species in bicarbonate solutions are [RuIVRuIII(µ-CO3)4(OH)(CO3)]4− and [RuIVRuIV(µ-CO3)4(O)(CO3)]4− based on density functional theory (DFT) calculations. The formation of HCO4− in the course of the oxidation has been demonstrated by DFT. The catalyst acts as homogeneous water oxidation catalyst, and after long term chronoamperometry, the absorption spectra does not change significantly. Each step has been found to follow a proton coupled electron transfer process (PCET) as obtained from the pH dependent studies. The catalytic current is found to follow linear relation with the concentration of the catalyst and bicarbonate. Thus, bicarbonate is involved in the catalytic process that is also evident from the generation of higher oxidation peaks in cyclic voltammetry. The detailed mechanism has been derived by DFT. A catalyst with no organic ligands has the advantage of long-time stability.

A Ru diphosphonato complex with a metal-metal bond for water oxidation

Unlike [Ru2(μ-O2CCH3)4], the structurally analogous water-soluble RuII,III2 diphosphonato complex K3[Ru2(hedp)2(H2O)2] (K3·1) is only involved in stoichiometric water oxidation with a maximum 67% O2 yield under CAN/HNO3 solution (pH 1.0) for 2.5 h. The water oxidation mechanism and intermediate products were ascertained by UV-vis, ESI-MS and DFT calculation.

Inhibition of oxygen dimerization by local symmetry tuning in Li-rich layered oxides for improved stability

Li-rich layered oxide cathode materials show high capacities in lithium-ion batteries owing to the contribution of the oxygen redox reaction. However, structural accommodation of this reaction usually results in O–O dimerization, leading to oxygen release and poor electrochemical performance. In this study, we propose a new structural response mechanism inhibiting O–O dimerization for the oxygen redox reaction by tuning the local symmetry around the oxygen ions. Compared with regular Li₂RuO₃, the structural response of the as-prepared local-symmetry-tuned Li₂RuO₃ to the oxygen redox reaction involves the telescopic O–Ru–O configuration rather than O–O dimerization, which inhibits oxygen release, enabling significantly enhanced cycling stability and negligible voltage decay. This discovery of the new structural response mechanism for the oxygen redox reaction will provide a new scope for the strategy of enhancing the anionic redox stability, paving unexplored pathways toward further development of high capacity Li-rich layered oxides.

Li-rich layered oxide cathodes show high capacities in Li-ion batteries but suffer from structural degradation via O–O dimerization. Here, the authors present local-symmetry-tuned Li₂RuO₃ with oxygen redox involving a telescopic O–Ru–O configuration avoiding O₂ release, enhancing cycling stability.

Ruthenium 4d-to-2p X-ray Emission Spectroscopy: A Simultaneous Probe of the Metal and the Bound Ligands

Ruthenium 4d-to-2p X-ray emission spectroscopy (XES) was systematically explored for a series of Ru²⁺ and Ru³⁺ species. Complementary density functional theory calculations were utilized to allow for a detailed assignment of the experimental spectra. The studied complexes have a range of different coordination spheres, which allows the influence of the ligand donor/acceptor properties on the spectra to be assessed. Similarly, the contributions of the site symmetry and the oxidation state of the metal were analyzed. Because the 4d-to-2p emission lines are dipole-allowed, the spectral features are intense. Furthermore, in contrast with K- or L-edge X-ray absorption of 4d transition metals, which probe the unoccupied levels, the observed 4p-to-2p XES arises from electrons in filled-ligand- and filled-metal-based orbitals, thus providing simultaneous access to the ligand and metal contributions to bonding. As such, 4d-to-2p XES should be a promising tool for the study of a wide range of 4d transition-metal compounds.

Ruthenium 4d-to-2p XES was applied to a series of molecular Ru complexes with varied coordination environment, oxidation state and site symmetry. Through correlations to calculations, it is demonstrated the Ru 4d-to-2p XES provides a unique probe of both the filled ligand np and filled metal 4d orbitals, providing a promising new tool for the study of a wide range of 4d transition metals.

In Situ Structural Determination of a Homogeneous Ruthenium Racemization Catalyst and Its Activated Intermediates Using X-Ray Absorption Spectroscopy

The activation process of a known Ru‐catalyst, dicarbonyl(pentaphenylcyclopentadienyl)ruthenium chloride, has been studied in detail using time resolved in situ X‐ray absorption spectroscopy. The data provide bond lengths of the species involved in the process as well as information about bond formation and bond breaking. On addition of potassium tert‐butoxide, the catalyst is activated and an alkoxide complex is formed. The catalyst activation proceeds via a key acyl intermediate, which gives rise to a complete structural change in the coordination environment around the Ru atom. The rate of activation for the different catalysts was found to be highly dependent on the electronic properties of the cyclopentadienyl ligand. During catalytic racemization of 1‐phenylethanol a fast‐dynamic equilibrium was observed.

Amphiphilic Oxo-Bridged Ruthenium "Green Dimer" for Water Oxidation

In 1982, an oxo-bridged dinuclear ruthenium(III) complex, known as “blue dimer,” was discovered to be active for water oxidation. In this work, a new amphiphilic ruthenium “green dimer” 2, obtained from an amphiphilic mononuclear Ru(bda) (N-OTEG) (L1) (1; N-OTEG = 4-(2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-pyridine; L1 = vinylpyridine) is reported. An array of mechanistic studies identifies “green dimer” 2 as a mixed valence of Ru^II-O-Ru^III oxo-bridged structure. Bearing the same bda^2- and amphiphilic axial ligands, monomer 1 and green dimer 2 can be reversibly converted by ascorbic acid and oxygen, respectively, in aqueous solution. More importantly, the oxo-bridged “green dimer” 2 was found to take water nucleophilic attack for oxygen evolution, in contrast to monomer 1 via radical coupling pathway for O-O bond formation. This is the first report of an amphiphilic oxo-bridged catalyst, which possesses a new oxygen evolution pathway of Ru-bda catalysts.

•

Green dimer (Ru^II-O-Ru^III), referring to “blue dimer” of Ru^III-O-Ru^III, is disclosed

•

The first amphiphilic μ-oxido-bridged catalyst is reported active for water oxidation

•

The oxo-bridged “green dimer” 2 takes water nucleophilic attack for O-O bond formation

•

This is the first Ru-bda catalyst, which possesses a new oxygen evolution pathway

Isolation and Study of Ruthenium-Cobalt Oxo Cubanes Bearing a High-Valent, Terminal RuV-Oxo with Significant Oxyl Radical Character

High-valent Ru^V-oxo intermediates have long been proposed in catalytic oxidation chemistry, but investigations into their electronic and chemical properties have been limited due to their reactive nature and rarity. The incorporation of Ru into the [Co₃O₄] subcluster via the single-step assembly reaction of Co^II(OAc)₂(H₂O)₄ (OAc = acetate), perruthenate (RuO₄^-), and pyridine (py) yielded an unprecedented Ru(O)Co₃(μ₃-O)₄(OAc)₄(py)₃ cubane featuring an isolable, yet reactive, Ru^V-oxo moiety. EPR, ENDOR, and DFT studies reveal a valence-localized [Ru^V(S = 1/2)Co^III₃(S = 0)O₄] configuration and non-negligible covalency in the cubane core. Significant oxyl radical character in the Ru^V-oxo unit is experimentally demonstrated by radical coupling reactions between the oxo cubane and both 2,4,6-tri-tert-butylphenoxyl and trityl radicals. The oxo cubane oxidizes organic substrates and, notably, reacts with water to form an isolable μ-oxo bis-cubane complex [(py)₃(OAc)₄Co₃(μ₃-O)₄Ru]-O-[RuCo₃(μ₃-O)₄(OAc)₄(py)₃]. Redox activity of the Ru^V-oxo fragment is easily tuned by the electron-donating ability of the distal pyridyl ligand set at the Co sites demonstrating strong electronic communication throughout the entire cubane cluster. Natural bond orbital calculations reveal cooperative orbital interactions of the [Co₃O₄] unit in supporting the Ru^V-oxo moiety via a strong π-electron donation.

Artificial photosynthesis: opportunities and challenges of molecular catalysts

Molecular catalysis plays an essential role in both natural and artificial photosynthesis (AP). However, the field of molecular catalysis for AP has gradually declined in recent years because of doubt about the long-term stability of molecular-catalyst-based devices. This review summarizes the development history of molecular-catalyst-based AP, including the fundamentals of AP, molecular catalysts for water oxidation, proton reduction and CO2 reduction, and molecular-catalyst-based AP devices, and it provides an analysis of the advantages, challenges, and stability of molecular catalysts. With this review, we aim to highlight the following points: (i) an investigation on molecular catalysis is one of the most promising ways to obtain atom-efficient catalysts with outstanding intrinsic activities; (ii) effective heterogenization of molecular catalysts is currently the primary challenge for the application of molecular catalysis in AP devices; (iii) development of molecular catalysts is a promising way to solve the problems of catalysis involved in practical solar fuel production. In molecular-catalysis-based AP, much has been attained, but more challenges remain with regard to long-term stability and heterogenization techniques.

Kinetics and mechanisms of catalytic water oxidation

The kinetics and mechanisms of thermal and photochemical oxidation of water with homogeneous and heterogeneous catalysts, including conversion from homogeneous to heterogeneous catalysts in the course of water oxidation, are discussed in this review article. Molecular and homogeneous catalysts have the advantage to clarify the catalytic mechanisms by detecting active intermediates in catalytic water oxidation. On the other hand, heterogeneous nanoparticle catalysts have advantages for practical applications due to high catalytic activity, robustness and easier separation of catalysts by filtration as compared with molecular homogeneous precursors. Ligand oxidation of homogeneous catalysts sometimes results in the dissociation of ligands to form nanoparticles, which act as much more efficient catalysts for water oxidation. Since it is quite difficult to identify active intermediates on the heterogeneous catalyst surface, the mechanism of water oxidation has hardly been clarified under heterogeneous catalytic conditions. This review focuses on the kinetics and mechanisms of catalytic water oxidation with homogeneous catalysts, which may be converted to heterogeneous nanoparticle catalysts depending on various reaction conditions.

Characterization of a trinuclear ruthenium species in catalytic water oxidation by Ru(bda)(pic)2 in neutral media

A Ru(III)-O-Ru(IV)-O-Ru(III) type trinuclear species was crystallographically characterized in water oxidation by Ru(bda)(pic)2 (H2bda = 2,2'-bipyridine-6,6'-dicarboxylic acid; pic = 4-picoline) under neutral conditions. The formation of a ruthenium trimer due to the reaction of Ru(IV)[double bond, length as m-dash]O with Ru(II)-OH2 was fully confirmed by chemical, electrochemical and photochemical methods. Since the oxidation of the trimer was proposed to lead to catalyst decomposition, the photocatalytic water oxidation activity was rationally improved by the suppression of the formation of the trimer.

Insight into Metal-Organic Framework Reactivity: Chemical Water Oxidation Catalyzed by a [Ru(tpy)(dcbpy)(OH2 )]2+ -Modified UiO-67

Investigation of chemical water oxidation was conducted on [Ru(tpy)(dcbpy)(OH₂ )]²⁺ (tpy=2,2':6',2''-terpyridine, dcbpy=5,5'-dicarboxy-2,2'-bipyridine)-doped UiO-67 metal-organic framework (MOF). The MOF catalyst exhibited a single-site reaction pathway with kinetic behavior similar to that of a homogeneous Ru complex. The reaction was first order with respect to both the concentration of the Ru catalyst and ceric ammonium nitrate (CAN), with k_cat =3(±2)×10^-3  m^-1  s^-1 in HNO₃ (pH 0.5). The common degradation pathways of ligand dissociation and dimerization were precluded by MOF incorporation, which led to sustained catalysis and greater reusability as opposed to the molecular catalyst in homogeneous solution. Lastly, at the same loading (ca. 97 nmol mg^-1 ), samples of different particle sizes generated the same amount of oxygen (ca. 100 nmol), indicative of in-MOF reactivity. The results suggest that the rate of redox-hopping charge transport is sufficient to promote chemistry throughout the MOF particulates.

The Key RuV=O Intermediate of Site-Isolated Mononuclear Water Oxidation Catalyst Detected by in Situ X-ray Absorption Spectroscopy

Improvement of the oxygen evolution reaction (OER) is a challenging step toward the development of sustainable energy technologies. Enhancing the OER rate and efficiency relies on understanding the water oxidation mechanism, which entails the characterization of the reaction intermediates. Very active Ru-bda type (bda is 2,2'-bipyridine-6,6'-dicarboxylate) molecular OER catalysts are proposed to operate via a transient 7-coordinate Ru^V═O intermediate, which so far has never been detected due to its high reactivity. Here we prepare and characterize a well-defined supported Ru(bda) catalyst on porous indium tin oxide (ITO) electrode. Site isolation of the catalyst molecules on the electrode surface allows trapping of the key 7-coordinate Ru^V═O intermediate at potentials above 1.34 V vs NHE at pH 1, which is characterized by electron paramagnetic resonance and in situ X-ray absorption spectroscopies. The in situ extended X-ray absorption fine structure analysis shows a Ru═O bond distance of 1.75 ± 0.02 Å, consistent with computational results. Electrochemical studies and density functional theory calculations suggest that the water nucleophilic attack on the surface-bound Ru^V═O intermediate (O-O bond formation) is the rate limiting step for OER catalysis at low pH.

Electrochemical and Resonance Raman Spectroscopic Studies of Water-Oxidizing Ruthenium Terpyridyl-Bipyridyl Complexes

The irreversible conversion of single-site water-oxidation catalysts (WOC) into more rugged catalysts structurally related to [(trpy)(5,5'-X₂ -bpy)Ru^IV (μ-O)Ru^IV (trpy)(O)(H₂ O)]⁴⁺ (X=H, 1-dn⁴⁺ ; X=F, 2-dn⁴⁺ ; bpy=2,2'-bipyridine; trpy=2,2':6',2"-terpyridine) represents a critical issue in the development of active and durable WOCs. In this work, the electrochemical and acid-base properties of 1-dn⁴⁺ and 2-dn⁴⁺ were evaluated. In situ resonance Raman spectroscopy was employed to characterize the species formed upon the stoichiometric oxidation of the single-site catalysts and demonstrated the formation of high-oxidation-state mononuclear Ru=O and RuO-O complexes. Under turnover conditions, the dinuclear intermediates, 1-dn⁴⁺ and 2-dn⁴⁺ as well as the previously proposed [Ru^VI (trpy)(O)₂ (H₂ O)]²⁺ complex (3²⁺ ) are formed. Complex 3²⁺ is a pivotal intermediate that provides access to the formation of dinuclear species. Single-crystal X-ray diffraction analysis of the isolated complex [Ru^IV (O)(trpy)(5,5'-F₂ -bpy)]²⁺ reveals a clear elongation of the Ru-N bond trans to the oxido ligand that documents the weakness of this bond, which promotes the release of the bpy ligand and the subsequent formation of 3²⁺ .

Moderate oxidation levels of Ru nanoparticles enhance molecular oxygen activation for cross-dehydrogenative-coupling reactions via single electron transfer

Ruthenium nanoparticles with altered surface oxidation states showed a volcano shaped relationship in molecular oxygen activation via single electron transfer for cross-dehydrogenative-coupling reactions.

Uncovering the Role of Oxygen Atom Transfer in Ru-Based Catalytic Water Oxidation

The realization of artificial photosynthesis carries the promise of cheap and abundant energy, however, significant advances in the rational design of water oxidation catalysts are required. Detailed information on the structure of the catalyst under reaction conditions and mechanisms of O-O bond formation should be obtained. Here, we used a combination of electron paramagnetic resonance (EPR), stopped flow freeze quench on a millisecond-second time scale, X-ray absorption (XAS), resonance Raman (RR) spectroscopy, and density functional theory (DFT) to follow the dynamics of the Ru-based single site catalyst, [Ru^II(NPM)(4-pic)₂(H₂O)]²⁺ (NPM = 4-t-butyl-2,6-di(1',8'-naphthyrid-2'-yl)pyridine, pic = 4-picoline), under the water oxidation conditions. We report a unique EPR signal with g-tensor, g_x = 2.30, g_y = 2.18, and g_z = 1.83 which allowed us to observe fast dynamics of oxygen atom transfer from the Ru^IV═O oxo species to the uncoordinated nitrogen of the NPM ligand. In few seconds, the NPM ligand modification results in [Ru^III(NPM-NO)(4-pic)₂(H₂O)]³⁺ and [Ru^III(NPM-NO,NO)(4-pic)₂]³⁺ complexes. A proposed [Ru^V(NPM)(4-pic)₂═O]³⁺ intermediate was not detected under the tested conditions. We demonstrate that while the proximal base might be beneficial in O-O bond formation via nucleophilic water attack on an oxo species as shown by DFT, the noncoordinating nitrogen is impractical as a base in water oxidation catalysts due to its facile conversion to the N-O group. This study opens new horizons for understanding the real structure of Ru catalysts under water oxidation conditions and points toward the need to further investigate the role of the N-O ligand in promoting water oxidation catalysis.

Quantum molecular motion in the mixed ion-radical complex, [(H2O)(H2S)]. Phys Chem Chem Phys 2016;18:27450-27459. [PMID: 27711703 DOI: 10.1039/c6cp05299a]

The cation dimer of water and hydrogen sulfide, [(H₂O)(H₂S)]⁺, serves as a fundamental model for the oxidation chemistry of H₂S. The known oxidative metabolism of H₂S by biological species in sulfur-rich environments has motivated the study of the inherent properties of this benchmark complex, with possible mechanistic implications for modern water oxidation chemistry. The low-energy isomer of this open-shell ion is a proton-transferred (PT) structure, H₃O⁺SH˙. An alternative PT structure, H₃S⁺OH˙, and a hemibonded (HB) isomer, [H₂O·SH₂]⁺, are also stable isomers, placing this complex intermediate to known (H₂O)₂⁺ (PT) and (H₂S)₂⁺ (HB) limiting regimes. This intermediate character suggested the possibility of unique molecular motion, even in the vibrational ground state. Path integral molecular dynamics and anharmonic vibrational spectroscopy simulations have been performed in this study, in order to understand the inherent quantum molecular motion of this complex. The resulting structural distributions were found to deviate significantly from both classical and harmonic analyses, including the observation of large-amplitude anharmonic motion of the central proton and nearly free rotation of the terminal hydrogens. The predicted vibrational spectra are particularly unique and suggest characteristic signatures of the strong electronic interactions and anharmonic vibrational mode couplings in this radical cation.

Synergistic oxygen atom transfer by ruthenium complexes with non-redox metal ions

Non-redox metal ions can affect the reactivity of active redox metal ions in versatile biological and heterogeneous oxidation processes; however, the intrinsic roles of these non-redox ions still remain elusive. This work demonstrates the first example of the use of non-redox metal ions as Lewis acids to sharply improve the catalytic oxygen atom transfer efficiency of a ruthenium complex bearing the classic 2,2'-bipyridine ligand. In the absence of Lewis acid, the oxidation of ruthenium(ii) complex by PhI(OAc)2 generates the Ru(iv)[double bond, length as m-dash]O species, which is very sluggish for olefin epoxidation. When Ru(bpy)2Cl2 was tested as a catalyst alone, only 21.2% of cyclooctene was converted, and the yield of 1,2-epoxycyclooctane was only 6.7%. As evidenced by electronic absorption spectra and EPR studies, both the oxidation of Ru(ii) by PhI(OAc)2 and the reduction of Ru(iv)[double bond, length as m-dash]O by olefin are kinetically slow. However, adding non-redox metal ions such as Al(iii) can sharply improve the oxygen transfer efficiency of the catalyst to 100% conversion with 89.9% yield of epoxide under identical conditions. Through various spectroscopic characterizations, an adduct of Ru(iv)[double bond, length as m-dash]O with Al(iii), Ru(iv)[double bond, length as m-dash]O/Al(iii), was proposed to serve as the active species for epoxidation, which in turn generated a Ru(iii)-O-Ru(iii) dimer as the reduced form. In particular, both the oxygen transfer from Ru(iv)[double bond, length as m-dash]O/Al(iii) to olefin and the oxidation of Ru(iii)-O-Ru(iii) back to the active Ru(iv)[double bond, length as m-dash]O/Al(iii) species in the catalytic cycle can be remarkably accelerated by adding a non-redox metal, such as Al(iii). These results have important implications for the role played by non-redox metal ions in catalytic oxidation at redox metal centers as well as for the understanding of the redox mechanism of ruthenium catalysts in the oxygen atom transfer reaction.

Manganese Compounds as Water-Oxidizing Catalysts: From the Natural Water-Oxidizing Complex to Nanosized Manganese Oxide Structures

All cyanobacteria, algae, and plants use a similar water-oxidizing catalyst for water oxidation. This catalyst is housed in Photosystem II, a membrane-protein complex that functions as a light-driven water oxidase in oxygenic photosynthesis. Water oxidation is also an important reaction in artificial photosynthesis because it has the potential to provide cheap electrons from water for hydrogen production or for the reduction of carbon dioxide on an industrial scale. The water-oxidizing complex of Photosystem II is a Mn-Ca cluster that oxidizes water with a low overpotential and high turnover frequency number of up to 25-90 molecules of O2 released per second. In this Review, we discuss the atomic structure of the Mn-Ca cluster of the Photosystem II water-oxidizing complex from the viewpoint that the underlying mechanism can be informative when designing artificial water-oxidizing catalysts. This is followed by consideration of functional Mn-based model complexes for water oxidation and the issue of Mn complexes decomposing to Mn oxide. We then provide a detailed assessment of the chemistry of Mn oxides by considering how their bulk and nanoscale properties contribute to their effectiveness as water-oxidizing catalysts.

Cooperative effects in homogenous water oxidation catalysis by mononuclear ruthenium complexes

The homogenous water oxidation catalysis by [Ru(terpy)(bipy)Cl](+) (1) and [Ru(terpy)(Me2bipy)Cl](+) (2) (terpy = 2,2':6',2''-terpyridine, bipy = 2,2'-bipyridine, Me2bipy = 4,4'-dimethyl-2,2'-bipyridine) under the influence of two redox mediators [Ru(bipy)3](2+) (3) and [Ru(phen)2(Me2bipy)](2+) (4) (phen = 1,10-phenanthroline) was investigated using Ce(4+) as sacrificial oxidant. Oxygen evolution experiments revealed that mixtures of both 2-4 and 2-3 produced more molecular oxygen than catalyst 2 alone. In contrast, the combination of mediator 4 and catalyst 1 resulted in a lower catalytic performance of 1. Measurements of the temporal change in the intensity of a UV transition at 261 nm caused by the addition of four equivalents of Ce(4+) to 2 revealed three distinctive regions-suggested to correspond to the stepwise processes: (i) [Ru(IV)=O](2+) → [Ru(V)=O](3+); (ii) [Ru(V)=O](3+) → [Ru(III)-(OOH)](2+); and (iii) [Ru(III)-(OOH)](2+) → [Ru(II)-OH2](2+). UV-Visible spectrophotometric experiments on the 1-4 and 2-4 mixtures, also carried out with four equivalents of Ce(4+), demonstrated a faster [Ru(phen)2(Me2bipy)](3+) → [Ru(phen)2(Me2bipy)](2+) reduction rate in 2-4 than that observed for the 1-4 combination. Cyclic voltammetry data measured for the catalysts and the mixtures revealed a coincidence in the potentials of the Ru(II)/Ru(III) redox process of mediators 3 and 4 and the predicted [Ru(IV)=O](2+)/[Ru(V)=O](3+) potential of catalyst 2. In contrast, the [Ru(IV)=O](2+)/[Ru(V)=O](3+) process for catalyst 1 was found to occur at a higher potential than the Ru(II)/Ru(III) redox process for 4. Both the spectroscopic and electrochemical experiments provide evidence that the interplay between the mediator and the catalyst is an important determinant of the catalytic activity.

Spectroscopic analysis of catalytic water oxidation by [Ru(II)(bpy)(tpy)H2O]2+ suggests that Ru(V)═O is not a rate-limiting intermediate

Modern chemistry's grand challenge is to significantly improve catalysts for water splitting. Further progress requires detailed spectroscopic and computational characterization of catalytic mechanisms. We analyzed one of the most studied homogeneous single-site Ru catalysts, [Ru(II)(bpy)(tpy)H2O](2+) (where bpy = 2,2'-bipyridine, tpy = 2,2';6',2″-terpyridine). Our results reveal that the [Ru(V)(bpy)(tpy)═O](3+) intermediate, reportedly detected in catalytic mixtures as a rate-limiting intermediate in water activation, is not present as such. Using a combination of electron paramagnetic resonance (EPR) and X-ray absorption spectroscopy, we demonstrate that 95% of the Ru complex in the catalytic steady state is of the form [Ru(IV)(bpy)(tpy)═O](2+). [Ru(V)(bpy)(tpy)═O](3+) was not observed, and according to density functional theory (DFT) analysis, it might be thermodynamically inaccessible at our experimental conditions. A reaction product with unique EPR spectrum was detected in reaction mixtures at about 5% and assigned to Ru(III)-peroxo species with (-OOH or -OO- ligands). We also analyzed the [Ru(II)(bpy)(tpy)Cl](+) catalyst precursor and confirmed that this molecule is not a catalyst and its oxidation past Ru(III) state is impeded by a lack of proton-coupled electron transfer. Ru-Cl exchange with water is required to form active catalysts with the Ru-H2O fragment. [Ru(II)(bpy)(tpy)H2O](2+) is the simplest representative of a larger class of water oxidation catalysts with neutral, nitrogen containing heterocycles. We expect this class of catalysts to work mechanistically in a similar fashion via [Ru(IV)(bpy)(tpy)═O](2+) intermediate unless more electronegative (oxygen containing) ligands are introduced in the Ru coordination sphere, allowing the formation of more oxidized Ru(V) intermediate.

Surface immobilization of a tetra-ruthenium substituted polyoxometalate water oxidation catalyst through the employment of conducting polypyrrole and the layer-by-layer (LBL) technique

A tetra Ru-substituted polyoxometalate Na10[{Ru4O4(OH)2(H2O)4}(γ-SiW10O36)2] (Ru4POM) has been successfully immobilised onto glassy carbon electrodes and indium tin oxide (ITO) coated glass slides through the employment of a conducting polypyrrole matrix and the layer-by-layer (LBL) technique. The resulting Ru4POM doped polypyrrole films showed stable redox behavior associated with the Ru centres within the Ru4POM, whereas, the POM's tungsten-oxo redox centres were not accessible. The films showed pH dependent redox behavior within the pH range 2-5 whilst exhibiting excellent stability towards redox cycling. The layer-by-layer assembly was constructed onto poly(diallyldimethylammonium chloride) (PDDA) modified carbon electrodes by alternate depositions of Ru4POM and a Ru(II) metallodendrimer. The resulting Ru4POM assemblies showed stable redox behavior for the redox processes associated with Ru4POM in the pH range 2-5. The charge transfer resistance of the LBL films was calculated through AC-Impedance. Surface characterization of both the polymer and LBL Ru4POM films was carried out using atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). Initial investigations into the ability of the Ru4POM LBL films to electrocatalytically oxidise water at pH 7 have also been conducted.

Competitive oxygen-18 kinetic isotope effects expose O–O bond formation in water oxidation catalysis by monomeric and dimeric ruthenium complexes

Competitive ¹⁸O KIEs on water oxidation catalysis provide a probe of transition states for O–O bond formation.

The electronic nature of terminal oxo ligands in transition-metal complexes: ambiphilic reactivity of oxorhenium species

The synthesis of the Lewis acid-base adducts of B(C6F5)3 and BF3 with [DAAmRe(O)(X)] DAAm = N,N-bis(2-arylaminoethyl)methylamine; aryl = C6F5 (X = Me, 1, COCH3, 2, Cl, 3) as well as their diamidopyridine (DAP) (DAP=(2,6-bis((mesitylamino)methyl)pyridine) analogues, [DAPRe(O)(X)] (X = Me, 4, Cl, 5, I, 6, and COCH3,7), are described. In these complexes the terminal oxo ligands act as nucleophiles. In addition we also show that stoichiometric reactions between 3 and triarylphosphine (PAr3) result in the formation of triarylphosphine oxide (OPAr3). The electronic dependence of this reaction was studied by comparing the rates of oxygen atom transfer for various para-substituted triaryl phosphines in the presence of CO. From these experiments a reaction constant ρ = -0.29 was obtained from the Hammett plot. This suggests that the oxygen atom transfer reaction is consistent with nucleophilic attack of phosphorus on an electrophilic metal oxo. To the best of our knowledge, these are the first examples of mono-oxo d(2) metal complexes in which the oxo ligand exhibits ambiphilic reactivity.

Experimental demonstration of radicaloid character in a Ru(V)=O intermediate in catalytic water oxidation

Water oxidation is the key half reaction in artificial photosynthesis. An absence of detailed mechanistic insight impedes design of new catalysts that are more reactive and more robust. A proposed paradigm leading to enhanced reactivity is the existence of oxyl radical intermediates capable of rapid water activation, but there is a dearth of experimental validation. Here, we show the radicaloid nature of an intermediate reactive toward formation of the O-O bond by assessing the spin density on the oxyl group by Electron Paramagnetic Resonance (EPR). In the study, an (17)O-labeled form of a highly oxidized, short-lived intermediate in the catalytic cycle of the water oxidation catalyst cis,cis-[(2,2-bipyridine)2(H2O)Ru(III)ORu(III)(OH2)(bpy)2](4+) was investigated. It contains Ru centers in oxidation states [4,5], has at least one Ru(V) = O unit, and shows