Subcomponent Self-Assembly and Guest-Binding Properties of Face-Capped Fe4L48+ Capsules

Photoresponsive Hydrogen-Bonded Organic Frameworks-Enabled Organic Photoelectrochemical Transistors for Sensitive Bioanalysis

A facile route for exponential magnification of transconductance (gm) in an organic photoelectrochemical transistor (OPECT) is still lacking. Herein, photoresponsive hydrogen-bonded organic frameworks (PR-HOFs) have been shown to be efficient for gm magnification in a typical poly(ethylene dioxythiophene):poly(styrenesulfonate) OPECT. Specifically, 450 nm light stimulation of 1,3,6,8-tetrakis (p-benzoic acid) pyrene (H4TBAPy)-based HOF could efficiently modulate the device characteristics, leading to the considerable gm magnification over 78 times from 0.114 to 8.96 mS at zero Vg. In linkage with a DNA nanomachine-assisted steric hindrance amplification strategy, the system was then interfaced with the microRNA-triggered structural DNA evolution toward the sensitive detection of a model target microRNA down to 0.1 fM. This study first reveals HOFs-enabled efficient gm magnification in organic electronics and its application for sensitive biomolecular detection.

Heterometallic cages: synthesis and applications

High symmetry metallosupramolecular architectures (MSAs) have been exploited for a range of applications including molecular recognition, catalysis and drug delivery. Recently there have been increasing efforts to enhance those applications by generating reduced symmetry MSAs. While there are several emerging methods for generating lower symmetry MSAs, this tutorial review examines the general methods used for synthesizing heterometallic MSAs with a particular focus on heterometallic cages. Additionally, the intrinsic properties of the cages and their potential emerging applications as host-guest systems and reaction catalysts are described.

Anionic Templates Drive Conversion between a ZnII9L6 Tricapped Trigonal Prism and ZnII6L4 Pseudo-Octahedra

This work introduces the use of 8-aminoquinoline subcomponents to generate complex three-dimensional structures. Together with a tris(formylpyridine), 8-aminoquinoline condensed around Zn^II templates to produce a tris(tridentate) ligand. This ligand is incorporated into either a tricapped trigonal prismatic Zn^II₉L₆ structure or a pair of pseudo-octahedral Zn^II₆L₄ diastereomers, with S₄ and D₂ symmetries. Introduction of a methyl group onto the aminoquinoline modulated the coordination sphere of Zn^II, which favored the Zn^II₉L₆ structure and disfavored the Zn^II₆L₄ assembly. The tricapped trigonal prismatic Zn^II₉L₆ architecture converted into a single Zn^II₆L₄ cage diastereomer following the addition of a dianionic 4,4'-dinitrostilbene-2,2'-disulfonate guest. Four of these guests clustered tightly at the four windows of the Zn^II₆L₄ cage, held in place through electrostatic interactions and hydrogen bonding, stabilize a single diastereomeric configuration with S₄ symmetry.

A spin crossover FeII4L6 cage based on pyridyl-hydrazone sites

Reported here is the first Fe^II based supramolecular cage with pyridyl-hydrazone ligand scaffolds that exhibits temperature induced spin crossover behaviour. Density functional theory calculations were employed to investigate the cause of the occurrence of this phenomenon based on the ligand structure. These results indicate that the reported low-spin cages with pyridyl-imine sites could be reconsidered for spin crossover by carefully manipulating the functional groups in the ligand system.

Computational Modeling of Supramolecular Metallo-organic Cages-Challenges and Opportunities

Self-assembled metallo-organic cages have emerged as promising biomimetic platforms that can encapsulate whole substrates akin to an enzyme active site. Extensive experimental work has enabled access to a variety of structures, with a few notable examples showing catalytic behavior. However, computational investigations of metallo-organic cages are scarce, not least due to the challenges associated with their modeling and the lack of accurate and efficient protocols to evaluate these systems. In this review, we discuss key molecular principles governing the design of functional metallo-organic cages, from the assembly of building blocks through binding and catalysis. For each of these processes, computational protocols will be reviewed, considering their inherent strengths and weaknesses. We will demonstrate that while each approach may have its own specific pitfalls, they can be a powerful tool for rationalizing experimental observables and to guide synthetic efforts. To illustrate this point, we present several examples where modeling has helped to elucidate fundamental principles behind molecular recognition and reactivity. We highlight the importance of combining computational and experimental efforts to speed up supramolecular catalyst design while reducing time and resources.

Incorporation of a Phosphino(pyridine) Subcomponent Enables the Formation of Cages with Homobimetallic and Heterobimetallic Vertices

Biological systems employ multimetallic assemblies to achieve a range of functions. Here we demonstrate the preparation of metal–organic cages that contain either homobimetallic or heterobimetallic vertices. These vertices are constructed using 2-formyl-6-diphenylphosphinopyridine, which forms ligands that readily bridge between a pair of metal centers, thus enforcing the formation of bimetallic coordination motifs. Two pseudo-octahedral homometallic M^I₁₂L₄ cages (M^I = Cu^I or Ag^I) were prepared, with a head-to-head configuration of their vertices confirmed by X-ray crystallography and multinuclear NMR for Ag^I. The phosphino-pyridine subcomponent also enabled the formation of a class of octanuclear Cd^II₄Cu^I₄L₄ tetrahedral cages, representing an initial example of self-assembled cages containing well-defined heterobimetallic vertices.

Beyond Platonic: How to Build Metal-Organic Polyhedra Capable of Binding Low-Symmetry, Information-Rich Molecular Cargoes

The field of metallosupramolecular chemistry has advanced rapidly in recent years. Much work in this area has focused on the formation of hollow self-assembled metal-organic architectures and exploration of the applications of their confined nanospaces. These discrete, soluble structures incorporate metal ions as ‘glue’ to link organic ligands together into polyhedra.Most of the architectures employed thus far have been highly symmetrical, as these have been the easiest to prepare. Such high-symmetry structures contain pseudospherical cavities, and so typically bind roughly spherical guests. Biomolecules and high-value synthetic compounds are rarely isotropic, highly-symmetrical species. To bind, sense, separate, and transform such substrates, new, lower-symmetry, metal-organic cages are needed. Herein we summarize recent approaches, which taken together form the first draft of a handbook for the design of higher-complexity, lower-symmetry, self-assembled metal-organic architectures.

An Adaptable Water-Soluble Molecular Boat for Selective Separation of Phenanthrene from Isomeric Anthracene

Anthracene crude oil is a common source of phenanthrene for its industrial use. The isolation of phenanthrene from this source is a challenging task due to very similar physical properties to its isomer anthracene. We report here a water-soluble Pd(II) molecular boat (MB1) with unusual structural topology that was obtained by assembling a flexible tetrapyridyl donor (L) with a cis-Pd(II) acceptor. The flexible backbone of the boat enabled it to breathe in the presence of a guest optimizing the fit within the cavity. The boat binds phenanthrene more strongly than anthracene, which enabled separation of phenanthrene with an >98% purity from an equimolar mixture of the two isomers using MB1 as an extracting agent. MB1 represents a unique example of a coordination receptor suitable for selective aqueous extraction of phenanthrene from anthracene with reusability of several cycles.

Templation and Concentration Drive Conversion Between a FeII12L12 Pseudoicosahedron, a FeII4L4 Tetrahedron, and a FeII2L3 Helicate

We report the construction of three structurally distinct self-assembled architectures: Fe^II₁₂L₁₂ pseudoicosahedron 1, Fe^II₂L₃ helicate 2, and Fe^II₄L₄ tetrahedron 3, formed from a single triazatriangulenium subcomponent A under different reaction conditions. Pseudoicosahedral capsule 1 is the largest formed through subcomponent self-assembly to date, with an outer-sphere diameter of 5.4 nm and a cavity volume of 15 nm³. The outcome of self-assembly depended upon concentration, where the formation of pseudoicosahedron 1 was favored at higher concentrations, while helicate 2 exclusively formed at lower concentrations. The conversion of pseudoicosahedron 1 or helicate 2 into tetrahedron 3 occurred following the addition of a CB₁₁H₁₂^- or B₁₂F₁₂^2- template.

Permanent Porosity in Hydroxamate Titanium-Organic Polyhedra

Following the synthesis of hydroxamate titanium-organic frameworks, we now extend these siderophore-type linkers to the assembly of the first titanium-organic polyhedra displaying permanent porosity. Mixed-linker versions of this molecular cage (cMUV-11) are also used to demonstrate the effect of pore chemistry in accessing high surface areas of near 1200 m²·g^-1.

FeII 4L4 tetrahedron binds and aggregates DNA G-quadruplexes

Since the discovery of the G-quadruplex (G4) structure in telomeres in 1980s, studies have established the role it plays in various biological processes. Here we report binding between DNA G4 and a self-assembled tetrahedral metal-organic cage 1 and consequent formation of aggregates, whereby the cage protects the DNA G4 from cleavage by S1 nuclease. We monitor DNA–cage interaction using fluorescence spectroscopy, firstly by quenching of a fluorescent label appended to the 5′ end of G4. Secondly, we detect the decrease in fluorescence of the G4-selective dyes thioflavin-T and Zn-PPIX bound to various DNA G4 sequences following the addition of cage 1. Our results demonstrate that 1 interacts with a wide range of G4s. Moreover, gel electrophoresis, circular dichroism and dynamic light scattering measurements establish the binding of 1 to G4 and indicate the formation of aggregate structures. Finally, we find that DNA G4 contained in an aggregate of cage 1 is protected from cleavage by S1 nuclease.

We find Fe^II₄L₄ binds to G-quadruplex and forms aggregates. G-quadruplex in the aggregates is protected from digestion by S₁ nuclease.

Recent advances in heteroleptic multiple-stranded metallosupramolecules

Well-ordered combination of defined coordination spheres and multiple types of ligands (heteroleptic) in a given structure can expand the structural complexity and functional diversity of the resulting metallosupramolecules. Such heteroleptic metallosupramolecular architectures are expected to afford advanced utility in a variety of applications. In this concise review article, recent advances in the development of multi-nuclear-cluster-based heteroleptic multiple-stranded (HLMS) metallosupramolecules are summarized and demonstrated. To construct HLMS metallosupramolecules, one type of multitopic ligands can be employed for building up multiple strands, while another type of ligands can be utilized to construct multi-nuclear clusters. Most HLMS metallosupramolecules adopt helical geometries and have high molecular symmetry, which can be key factors for the structural completion. HLMS metallosupramolecules can be used as basic building blocks for the fabrication of higher-order polymeric or discrete assembly architectures with well-defined geometries.

Coordination-driven self-assembly of a series of dinuclear M2L2 mesocates with a bis-bidentate pyridylimine ligand

Four isostructural dinuclear M2L2 mesocates of the general formula [M2(NCS)4(L)2]·4.5MeOH (1M; M = Mn, Fe, Co, Zn) were constructed by using the coordination-driven self-assembly of the [M(NCS)2] precursor and the flexible bis-bidentate pyridylimine Schiff base ligand L (L = 4,4'-(1,4-phenylenebis(oxy))bis(N-(pyridin-2-ylmethylene)aniline). The centrosymmetric M2L2 mesocate forms through the side-by-side coordination of two L ligands to a pair of M(ii) ions. The mesocates exhibit a reversible temperature induced desolvation-solvation behavior without losing their structural integrity. The activated 1Co, as the representative M2L2 mesocate, shows an exceptionally high MeOH vapour uptake capacity of 481.9 cm3 g-1 (68.8 wt%) at STP with good recyclability. Notably, it also exhibits CO2 adsorption with an uptake capacity of 20.2 cm3 g-1 (3.6 wt%) at room temperature and 1 bar.

Synthesis and Characterization of an Isoreticular Family of Calixarene-Capped Porous Coordination Cages

Functionalization of permanently porous coordination cages has been used to tune phase, surface area, stability, and solubility in this promising class of adsorbents. For many cages, however, these properties are intricately tied together, and installation of functional groups, for example, to increase solubility often leads to a decrease in surface area. Calixarene-capped cages offer the advantage in that they are cluster-terminated cages whose solid-state packing, and thus surface area, is typically governed by the nature of the capping ligand rather than the bridging ligand. In this work we investigate the influence of ligand functionalization on two series of isoreticular Ni(II)- and Co(II)-based calixarene-capped cages. The two types of materials described are represented as octahedral and rectangular prismatic coordination cages and can be synthesized in a modular manner, allowing for the substitution of dicarboxylate bridging ligands and the introduction of functional groups in specific locations on the cage. We ultimately show that highly soluble cages can be obtained while still having access to high surface areas for many of the isolated phases.

Kinetics of Toehold-Mediated DNA Strand Displacement Depend on FeII4L4 Tetrahedron Concentration

The toehold-mediated strand displacement reaction (SDR) is a powerful enzyme-free tool for molecular manipulation, DNA computing, signal amplification, etc. However, precise modulation of SDR kinetics without changing the original design remains a significant challenge. We introduce a new means of modulating SDR kinetics using an external stimulus: a water-soluble Fe^II₄L₄ tetrahedral cage. Our results show that the presence of a flexible phosphate group and a minimum toehold segment length are essential for Fe^II₄L₄ binding to DNA. SDRs mediated by toehold ends in different lengths (3-5) were investigated as a function of cage concentration. Their reaction rates all first increased and then decreased as cage concentration increased. We infer that cage binding on the toehold end slows SDR, whereas the stabilization of intermediates that contain two overhangs accelerates SDR. The tetrahedral cage thus serves as a versatile tool for modulation of SDR kinetics.

Synthetic Approaches to Metallo-Supramolecular CoII Polygons and Potential Use for H2O Oxidation

Metal-directed self-assembly has been applied to prepare supramolecular coordination polygons which adopt tetrahedral (1) or trigonal disklike topologies (2). In the solid state, 2 assembles into a stable halide-metal-organic material (Hal-MOM-2), which catalyzes H₂O oxidation under photo- and electrocatalytic conditions, operating with a maximum TON = 78 and TOF = 1.26 s^-1. DFT calculations attribute the activity to a Co^III-oxyl species. This study provides the first account of how Co^II imine based supramolecules can be employed as H₂O oxidation catalysts.

Guest Binding Drives Host Redistribution in Libraries of CoII 4 L4 Cages

Two CoII 4 L4 tetrahedral cages prepared from similar building blocks showed contrasting host-guest properties. One cage did not bind guests, whereas the second encapsulated a series of anions, due to electronic and geometric effects. When the building blocks of both cages were present during self-assembly, a library of five CoII LA x LB 4-x cages was formed in a statistical ratio in the absence of guests. Upon incorporation of anions able to interact preferentially with some library members, the products obtained were redistributed in favor of the best anion binders. To quantify the magnitudes of these templation effects, ESI-MS was used to gauge the effect of each template upon library redistribution.

No, Not That Way, the Other Way: Creating Active Sites in Self-Assembled Host Molecules

This Account describes our efforts over the last decade to synthesize self-assembled metal–ligand cage complexes that display reactive functional groups on their interiors. This journey has taken us down a variety of research avenues, including studying the mechanism of reversible self-assembly, analyzing ligand self-sorting properties, post-assembly reactivity, molecular recognition, and binding studies, and finally reactivity and catalysis. Each of these individual topics are discussed here, as are the lessons learned along the way and the future research outlook. These self-assembled hosts are the closest mimics of enzymes to date, as they are capable of size- and shape-selective molecular recognition, substrate activation and turnover, as well as showing less common ‘biomimetic’ properties such as the ability to employ cofactors in reactivity, and alter the prevailing mechanism of the catalyzed reactions.

1 Introduction

2 Paddlewheels and Self-Sorting Behavior

3 First-Row Transition-Metal-Mediated Assembly: Sorting and Stereochemical Control

4 Post-Assembly Reactivity

5 Molecular Recognition and Catalysis

6 Conclusions and Outlook

Dynamic Complex-to-Complex Transformations of Heterobimetallic Systems Influence the Cage Structure or Spin State of Iron(II) Ions

Two new heterobimetallic cages, a trigonal‐bipyramidal and a cubic one, were assembled from the same mononuclear metalloligand by adopting the molecular library approach, using iron(II) and palladium(II) building blocks. The ligand system was designed to readily assemble through subcomponent self‐assembly. It allowed the introduction of steric strain at the iron(II) centres, which stabilizes its paramagnetic high‐spin state. This steric strain was utilized to drive dynamic complex‐to‐complex transformations with both the metalloligand and heterobimetallic cages. Addition of sterically less crowded subcomponents as a chemical stimulus transformed all complexes to their previously reported low‐spin analogues. The metalloligand and bipyramid incorporated the new building block more readily than the cubic cage, probably because the geometric structure of the sterically crowded metalloligand favours the cube formation. Furthermore it was possible to provoke structural transformations upon addition of more favourable chelating ligands, converting the cubic structures into bipyramidal ones.

Metal and Organic Templates Together Control the Size of Covalent Macrocycles and Cages

Covalent macrocycles and three-dimensional cages were prepared by the self-assembly of di- or tritopic anilines and 2,6-diformylpyridine subcomponents around palladium(II) templates. The resulting 2,6-bis(imino)pyridyl-Pd^II motif contains a tridentate ligand, leaving a free coordination site on the Pd^II centers, which points inward. The binding of ligands to the free coordination sites in these assemblies was found to alter the product stability, and multitopic ligands could be used to control product size. Multitopic ligands also bridged metallomacrocycles to form higher-order supramolecular assemblies, which were characterized via NMR spectroscopy, mass spectrometry, and X-ray crystallography. An efficient method was developed to reduce the imine bonds to secondary amines, leading to fully organic covalent macrocycles and cages that were inaccessible through other means.

FeII4L4 Tetrahedron Binds to Nonpaired DNA Bases

A water-soluble self-assembled supramolecular Fe^II₄L₄ tetrahedron binds to single stranded DNA, mismatched DNA base pairs, and three-way DNA junctions. Binding of the coordination cage quenches fluorescent labels on the DNA strand, which provides an optical means to detect the interaction and allows the position of the binding site to be gauged with respect to the fluorescent label. Utilizing the quenching and binding properties of the coordination cage, we developed a simple and rapid detection method based on fluorescence quenching to detect unpaired bases in double-stranded DNA.

Diastereoselective Control of Tetraphenylethene Reactivity by Metal Template Self-Assembly

The reaction of 4,4',4'',4'''-(ethene-1,1,2,2-tetrayl)tetraaniline with 2-pyridinecarboxaldehyde and iron(II) chloride resulted, after aqueous workup, in the diastereoselective formation of an [Fe₂ L₃ ]⁴⁺ triple-stranded helicate structure, irrespective of the stoichiometry employed. The helicate structure was characterized in solution by multinuclear NMR spectroscopy, and in the solid state by single-crystal X-ray crystallography. The reaction of iron(II) tetrafluoroborate or iron(II) bistriflimide with the tetraaniline and 2-pyridinecarboxaldehyde allowed the formation of an [Fe₈ L₆ ]¹⁶⁺ cube when the appropriate stoichiometry was used, but these structures were unstable with respect to hydrolysis. The pendant amine groups on the helicate can be functionalized by reaction with acid chlorides or anhydrides, and the resulting functionalized tetraphenylethene (TPE) units were isolated by the reaction of the helicate with tris(2-aminoethyl)amine. The emission properties of the TPE units were studied in THF/water mixtures, and they were found by dynamic light scattering to self-assemble into large (av. diameter 250 nm) structures.

Open versus Closed Polyaromatic Nanocavity: Enhanced Host Abilities toward Large Dyes and Pigments

Host functions of polyaromatic nanocavities were revealed by using an M₂ L₄ molecular cage and capsule. On the basis of the previously reported M₂ L₄ capsule with a closed polyaromatic cavity, a new M₂ L₄ cage (as a mixture of the isomers) was prepared by the quantitative assembly of two metal ions and four desymmetrized bispyridine ligands with a single polyaromatic panel. The obtained, open nanocavity of the cage exhibited enhanced binding abilities toward large dyes and pigments in water. For example, two molecules of coumarin dyes were bound in the nanocavity and showed strong whitish emission (up to Φ_F =34 %). Furthermore, metallopigments, the sizes of which are larger than the inner cavities of the cage and capsule, were bound only in the open polyaromatic nanocavity of the cage to give water-soluble 1:1 host-guest complexes.

Reversible multi-electron storage in dual-site redox-active supramolecular cages

Redox-active M₆L₄ cages display multiple reversible redox-events, enabling switching from overall +12 to −4 charged species with reversible storage of 16 electrons.

A Co8 metallacycle stabilized by double anion–π interactions

The syntheses, crystal structures and magnetic studies of two new Co^II 2,2′-bipyrimidine bridged complexes stabilized by hydrogen bonding versus anion–π interactions are reported.

Recent developments in the construction of metallacycle/metallacage-cored supramolecular polymers via hierarchical self-assembly

Supramolecular polymers have received considerable attention during the last few decades due to their scientific value in polymer chemistry and profound implications for future developments of advanced materials. Discrete supramolecular coordination complexes (SCCs) with well-defined size, shape, and geometry have been widely employed to construct hierarchical systems by coordination-driven self-assembly with the spontaneous formation of metal-ligand bonds, which results in the formation of well-defined two-dimensional (2D) metallacycles or three-dimensional (3D) metallacages with high functionalities. The incorporation of discrete SCCs into supramolecular polymers by the orthogonal combination of metal-ligand coordination and other noncovalent interactions or covalent bonding could further facilitate the construction of novel supramolecular polymers with hierarchical architectures and multiple functions including controllable uptake and release of guest molecules, providing a flexible platform for the development of smart materials. In this review, the recent progress in metallacycle/metallacage-cored supramolecular polymers that were constructed by the combination of metal-ligand interactions and other orthogonal interactions (including hydrophobic or hydrophilic interactions, hydrogen bonding, van der Waals forces, π-π stacking, electrostatic interactions, host-guest interactions and covalent bonding) has been discussed. In addition, the potential applications of metallacycle/metallacage-cored supramolecular polymers in the areas of light emitting, sensing, bio-imaging, delivery and release, etc., are also presented.

Waterproof architectures through subcomponent self-assembly

Construction of metal–organic containers that are soluble and stable in water can be challenging – we present diverse strategies that allow the synthesis of kinetically robust water-soluble architectures via subcomponent self-assembly.

Metal–organic containers are readily prepared through self-assembly, but achieving solubility and stability in water remains challenging due to ligand insolubility and the reversible nature of the self-assembly process. Here we have developed conditions for preparing a broad range of architectures that are both soluble and kinetically stable in water through metal(ii)-templated (M^II = Co^II, Ni^II, Zn^II, Cd^II) subcomponent self-assembly. Although these structures are composed of hydrophobic and poorly-soluble subcomponents, sulfate counterions render them water-soluble, and they remain intact indefinitely in aqueous solution. Two strategies are presented. Firstly, stability increased with metal–ligand bond strength, maximising when Ni^II was used as a template. Architectures that disassembled when Co^II, Zn^II and Cd^II templates were employed could be directly prepared from NiSO₄ in water. Secondly, a higher density of connections between metals and ligands within a structure, considering both ligand topicity and degree of metal chelation, led to increased stability. When tritopic amines were used to build highly chelating ligands around Zn^II and Cd^II templates, cryptate-like water-soluble structures were formed using these labile ions. Our synthetic platform provides a unified understanding of the elements of aqueous stability, allowing predictions of the stability of metal–organic cages that have not yet been prepared.

Investigating Subcellular Compartment Targeting Effect of Porous Coordination Cages for Enhancing Cancer Nanotherapy

Understanding the key factors for successful subcellular compartment targeting for cargo delivery systems is of great interest in a variety of fields such as bionanotechnology, cell biology, and nanotherapies. However, the fundamental basis for intracellular transportation with these systems has thus far rarely been discussed. As a cargo vector, porous coordination cages (PCCs) have great potential for use in cancer nanotherapy and to elucidate fundamental insight regarding subcellular compartment targeting. Herein, it is shown that the transportation of PCC cargo vectors though various subcellular barriers of the mammalian cell can be manipulated by tuning the vector's electronic property and surface affinity. It is found that the PCCs become selectively aggregated at the cell membrane, the cytoplasm, or the nucleus, respectively. When a DNA topoisomerase inhibitor is delivered into the nucleus by a neutral and lipophilic PCC, the anticancer efficacy is dramatically improved. The findings shed light to tune the interactions at the "bio-nano" interface. This study provides a key strategy for future work in targeting specific cell organelles for cell imaging, cargo delivery, and therapy. This research also offers key insight into the engineering of nanoscopic materials for furnishing cell organelle-specificity.

Luminescent Tetrahedral Molecular Cages Containing Ruthenium(II) Chromophores

We have designed linear metalloligands which contain a central photoactive [Ru(N^∧N)₃]²⁺ unit bordered by peripheral metal binding sites. The combination of these metalloligands with Zn(II) and Fe(II) ions leads to heterometallic tetrahedral cages, which were studied by NMR spectroscopy, mass spectrometry, and photophysical methods. Like the parent metalloligands, the cages remain emissive in solution. This approach allows direct incorporation of the favorable properties of ruthenium(II) polypyridyl complexes into larger self-assembled structures.

Cascade covalent and coordination bond formation for Ti-based cage assembly: catalysis and coordination bifunctionality of TiCl4

The metallosupramolecular Ti-based M₄L₄ cage of [Ti₄O₂L₄Cl₈] (L = 4-acetamidobenzoic acid) is synthesized via the one-pot solvothermal reaction of 4-aminobenzoic acid, acetic acid and TiCl₄. The Ti(iv) ion functions as a Lewis acid catalyst for acylation condensation, and then coordinates with the resultant 4-acetamidobenzoic acid to afford Ti-based cage formation in a cascade fashion.