Carbon Monoxide-Assisted Synthesis of Single-Crystalline Pd Tetrapod Nanocrystals through Hydride Formation

Amorphization Activated Multimetallic Pd Alloys for Boosting Oxygen Reduction Catalysis

Amorphous nanomaterials have drawn extensive attention owing to their unique features, while amorphization on noble metal nanomaterials still remains formidably challenging. Herein, we demonstrate a universal strategy to synthesize amorphous Pd-based nanomaterials from unary to quinary metals through the introduction of phosphorus (P). The amorphous Pd-based nanoparticles (NPs) exhibit generally promoted oxygen reduction reaction (ORR) activity and durability compared with their crystalline counterparts. Significantly, the quinary P-PdCuNiInSn NPs, benefiting from the amorphous structure and multimetallic component effect, exhibit mass activities as high as 1.04 A mgPd-1 and negligible activity decays of 1.8% among the stability tests, which are much better than values for original Pd NPs (0.134 A mgPd-1 and 28.4%). Experimental and theoretical analyses collectively reveal that the synergy of P-induced amorphization and the expansion of metallic components can considerably lower the free energy changes in the rate-determined step, thereby explaining the positive correlation with the catalytic activity.

The role of crystallinity of palladium nanocrystals in ROS generation and cytotoxicity induction

Palladium (Pd) nanocrystals with different crystalline forms exhibit distinct enzyme-like activities in generating reactive oxygen species (ROS). How such crystallinity-dependent catalytic activity regulates potential cytotoxicity remains to be elucidated. In the present work, Pd nanocrystals with four different crystalline forms were synthesized, and the underlying mechanisms involved in ROS-mediated cytotoxicity were systematically revealed. Pd nanocrystals with the {100} (nanocubes) and {111} (nanooctahedrons and nanotetrahedrons) facets triggered cytotoxicity by generating singlet oxygen (¹O₂) and hydroxyl radicals (OH˙), respectively. Meanwhile, Pd nanoconcave-tetrahedrons, which had both the {110} and {111} facets, induced ROS-mediated cytotoxicity via activating the superoxide (O₂˙^-) pathway. Consumption of protons and generation of hydroxide during intracellular ROS conversion resulted in pH alkalization, eventually leading to cell death. Our findings emphasize the importance of facet-dependent ROS generation promoted by Pd nanocrystals. Furthermore, alkalization is identified as a new biomarker for analyzing ROS-mediated cytotoxicity.

Single-Site vs. Cluster Catalysis in High Temperature Oxidations

The behavior of single Pt atoms and small Pt clusters was investigated for high-temperature oxidations. The high stability of these molecular sites in CHA is a key to intrinsic structure-performance descriptions of elemental steps such as O₂ dissociation, and subsequent oxidation catalysis. Subtle changes in the atomic structure of Pt are responsible for drastic changes in performance driven by specific gas/metal/support interactions. Whereas single Pt atoms and Pt clusters (> ca. 1 nm) are unable to activate, scramble, and desorb two O₂ molecules at moderate T (200 °C), clusters <1 nm do so catalytically, but undergo oxidative fragmentation. Oxidation of alkanes at high T is attributed to stable single Pt atoms, and the C-H cleavage is inferred to be rate-determining and less sensitive to changes in metal nuclearity compared to its effect on O₂ scrambling. In contrast, when combustion involves CO, catalysis is dominated by metal clusters, not single Pt atoms.

Phase-Controlled Synthesis of Pd-Se Nanocrystals for Phase-Dependent Oxygen Reduction Catalysis

Searching for highly efficient oxygen reduction reaction (ORR) electrocatalysts for fuel cell technology, in which the crystal structure plays a powerful role in regulating the electrocatalysis, is urgent yet challenging. Herein, we have explored the active and stable Pd-Se alloy electrocatalysts with controlled phase toward alkaline ORR. The phase-controlled Pd-Se nanoparticles (NPs) show interesting phase-dependent electrocatalytic performance, in which the Pd₁₇Se₁₅ NPs/C exhibits much better ORR performance than its counterpart, Pd₇Se₄ NPs/C, and the commercial Pd/C and Pt/C. Based on the detailed analysis, Pd in Pd₁₇Se₁₅ possesses more Se atom coordination and a higher valence state, thus providing a stronger capacity for the absorption of oxygenated species. DFT further reveals more charge transfer from the Pd₁₇Se₁₅ surface to the *OOH intermediate, which is the reason for the activity enhancement.

Pd nanoparticle growth monitored by DRIFT spectroscopy of adsorbed CO

Synchrotron-based X-ray absorption spectroscopy and scattering are known in situ probes of metal nanoparticles (NPs). A limited number of laboratory techniques allow post-synthesis diagnostics of the active metal surface area. This work demonstrates the high potential of infrared spectroscopy as an in situ laboratory probe for the growth of metal NPs on a substrate. We introduce a small fraction of CO molecules into the reaction mixture as a probe to monitor the reduction kinetics of the Pd2+ precursor on ceria in hydrogen.

Mechanistic insight into H2-mediated Ni surface diffusion and deposition to form branched Ni nanocrystals: a theoretical study

Present work systematically investigates the kinetic role played by H2 molecules during Ni surface diffusion and deposition to generate branched Ni nanostructures by employing Density Functional Theory (DFT) calculations and ab initio molecule dynamic (AIMD) simulations, respectively. The Ni surface diffusion results unravel that in comparison to the scenarios of Ni(110) and Ni(100), both the subsurface and surface H hinder the Ni surface diffusion over Ni(111) especially under the surface H coverage of 1.5 ML displaying the lowest Ds values, which greatly favors the trapping of the adatom Ni and subsequent overgrowth along the 111 direction. The Ni deposition simulations by AIMD further suggest that both the H2 molecule (in solution) and surface dissociatively adsorbed atomic H can promote Ni depositions onto Ni(111) and Ni(110) facets in a liquid solution. Moreover, a cooperation effect between H2 molecules and surface atomic H can be clearly observed, which greatly favors Ni depositions. Additionally, in addition to working as the solvent, the liquid C2H5OH can also interact with the Ni(111) surface to produce the surface atomic H, which then favored the Ni deposition. Finally, the Ni deposition rate predicted using the deposition constant (Ddep) was found to be much higher than its surface diffusion rate predicted using Ds for Ni(111) and Ni(110), which quantitatively verified the overgrowth along the 111 and 110 directions to produce the branched Ni nanostructures.

Palladium-based nanomaterials for cancer imaging and therapy

In recent decade, palladium-based (Pd-based) nanomaterials have shown significant potential for biomedical applications because of their unique optical properties, excellent biocompatibility and high stability in physiological environment. Compared with other intensively studied noble nanomaterials, such as gold (Au) and silver (Ag) nanomaterials, research on Pd-based nanomaterials started late, but the distinctive features, such as high photothermal conversion efficiency and high photothermal stability, have made them getting great attention in the field of nanomedicine. The goal of this review is to provide a comprehensive and critical perspective on the recent progress of Pd-based nanomaterials as imaging contrast agents and therapeutic agents. The imaging section focuses on applications in photoacoustic (PA) imaging, single-photon emission computed tomography (SPECT) imaging, computed tomography (CT) imaging and magnetic resonance (MR) imaging. For treatment of cancer, single photothermal therapy (PTT) and PTT combined with other therapeutic modalities will be discussed. Finally, the safety concerns, forthcoming challenges and perspective of Pd-based nanomaterials on biomedical applications will be presented.

Shape Control of Monodispersed Sub-5 nm Pd Tetrahedrons and Laciniate Pd Nanourchins by Maneuvering the Dispersed State of Additives for Boosting ORR Performance

It is a great challenge to simultaneously control the size, morphology, and facets of monodispersed Pd nanocrystals under a sub-5 nm regime. Meanwhile, quantitative understanding of the thermodynamic and kinetic parameters to maneuver the shape evolution of nanocrystals in a one-pot system still deserves investigation. Herein, a systematic study of the density functional theory (DFT)-calculated adsorption energy, thermodynamic factors, and reduction kinetics on Pd growth patterns is reported by combining theory and experiments, with a focus on the dispersed state of additives. As pure models, monodispersed Pd tetrahedrons enclosed by (111) facets with a narrow size distribution of 4.9 ± 1 nm and a high purity approaching 98% can be obtained when using 1,1'-binaphthalene (C₂₀ H₁₄ ) +2NH₃ as additives. Specifically, laciniate Pd nanourchins (Pd LUs) can evolve via anisotropic growth when replacing additive with dose-consistent 1,1'-binaphthyl-2,2'-diamine (C₂₀ H₁₆ N₂ , two NH₂ binding in C₂₀ H₁₄ ). Catalytic investigations show that the sub-5 nm Pd tetrahedrons exhibit higher activity in both the oxygen reduction (E_onset = 1.025 V, E_1/2 = 0.864 V) and formic acid oxidation reaction with respect to the Pd LUs and Pd black, which represents a great step for the development of well-defined Pd nanocrystals with size in the sub-5 nm regime as non-Pt electrocatalysts.

Carbon Monoxide Promotes the Catalytic Hydrogenation on Metal Cluster Catalysts

Size effect plays a crucial role in catalytic hydrogenation. The highly dispersed ultrasmall clusters with a limited number of metal atoms are one candidate of the next generation catalysts that bridge the single-atom metal catalysts and metal nanoparticles. However, for the unfavorable electronic property and their interaction with the substrates, they usually exhibit sluggish activity. Taking advantage of the small size, their catalytic property would be mediated by surface binding species. The combination of metal cluster coordination chemistry brings new opportunity. CO poisoning is notorious for Pt group metal catalysts as the strong adsorption of CO would block the active centers. In this work, we will demonstrate that CO could serve as a promoter for the catalytic hydrogenation when ultrasmall Pd clusters are employed. By means of DFT calculations, we show that Pd _n  (n = 2-147) clusters display sluggish activity for hydrogenation due to the too strong binding of hydrogen atom and reaction intermediates thereon, whereas introducing CO would reduce the binding energies of vicinal sites, thus enhancing the hydrogenation reaction. Experimentally, supported Pd₂CO catalysts are fabricated by depositing preestablished [Pd₂(μ-CO)₂Cl₄]^2- clusters on oxides and demonstrated as an outstanding catalyst for the hydrogenation of styrene. The promoting effect of CO is further verified experimentally by removing and reintroducing a proper amount of CO on the Pd cluster catalysts.

Anisotropic nanomaterials for shape-dependent physicochemical and biomedical applications

This review contributes towards a systematic understanding of the mechanism of shape-dependent effects on nanoparticles (NPs) for elaborating and predicting their properties and applications based on the past two decades of research. Recently, the significance of shape-dependent physical chemistry and biomedicine has drawn ever increasing attention. While there has been a great deal of effort to utilize NPs with different morphologies in these fields, so far research studies are largely localized in particular materials, synthetic methods, or biomedical applications, and have ignored the interactional and interdependent relationships of these areas. This review is a comprehensive description of the NP shapes from theory, synthesis, property to application. We figure out the roles that shape plays in the properties of different kinds of nanomaterials together with physicochemical and biomedical applications. Through systematic elaboration of these shape-dependent impacts, better utilization of nanomaterials with diverse morphologies would be realized and definite strategies would be expected for breakthroughs in these fields. In addition, we have proposed some critical challenges and open problems that need to be addressed in nanotechnology.

Local generation of hydrogen for enhanced photothermal therapy

By delivering the concept of clean hydrogen energy and green catalysis to the biomedical field, engineering of hydrogen-generating nanomaterials for treatment of major diseases holds great promise. Leveraging virtue of versatile abilities of Pd hydride nanomaterials in high/stable hydrogen storage, self-catalytic hydrogenation, near-infrared (NIR) light absorption and photothermal conversion, here we utilize the cubic PdH0.2 nanocrystals for tumour-targeted and photoacoustic imaging (PAI)-guided hydrogenothermal therapy of cancer. The synthesized PdH0.2 nanocrystals have exhibited high intratumoural accumulation capability, clear NIR-controlled hydrogen release behaviours, NIR-enhanced self-catalysis bio-reductivity, high NIR-photothermal effect and PAI performance. With these unique properties of PdH0.2 nanocrystals, synergetic hydrogenothermal therapy with limited systematic toxicity has been achieved by tumour-targeted delivery and PAI-guided NIR-controlled release of bio-reductive hydrogen as well as generation of heat. This hydrogenothermal approach has presented a cancer-selective strategy for synergistic cancer treatment.

Dendritic defect-rich palladium-copper-cobalt nanoalloys as robust multifunctional non-platinum electrocatalysts for fuel cells

Recently, the development of high-performance non-platinum electrocatalysts for fuel cell applications has been gaining attention. Palladium-based nanoalloys are considered as promising candidates to substitute platinum catalysts for cathodic and anodic reactions in fuel cells. Here, we develop a facile route to synthesize dendritic palladium–copper–cobalt trimetallic nanoalloys as robust multifunctional electrocatalysts for oxygen reduction and formic acid oxidation. To the best of our knowledge, the mass activities of the dendritic Pd₅₉Cu₃₀Co₁₁ nanoalloy toward oxygen reduction and formic acid oxidation are higher than those previously reported for non-platinum metal nanocatalysts. The Pd₅₉Cu₃₀Co₁₁ nanoalloys also exhibit superior durability for oxygen reduction and formic acid oxidation as well as good antimethanol/ethanol interference ability compared to a commercial platinum/carbon catalyst. The high performance of the dendritic Pd₅₉Cu₃₀Co₁₁ nanoalloys is attributed to a combination of effects, including defects, a synergistic effect, change of d-band center of palladium, and surface strain.

Fuel cells are promising for sustainable energy generation, but are limited by the performance of electrocatalysts. Here the authors synthesize dendritic palladium–copper–cobalt nanoalloys with electrocatalytic activity for oxygen reduction and formic acid oxidation as well as alcohol tolerance.

Surface-modulated palladium-nickel icosahedra as high-performance non-platinum oxygen reduction electrocatalysts

The search for high-performance non-platinum (Pt) electrocatalysts is the most challenging issue for fuel cell technology. Creating bimetallic non-Pt nanocrystals (NCs) with core/shell structures or alloy features has widely been explored as the most effective way for enhancing their electrochemical properties but still suffered from undesirable performance due to the limited interactions between the different components. By addressing the above issue, we report on a new class of active and stable bimetallic non-Pt electrocatalysts with palladium (Pd) icosahedra as the core and nickel (Ni) decorating the surface toward cathodic oxygen reduction reaction (ORR) under alkaline conditions. The optimized Pd₆Ni icosahedra with unique interaction between an icosahedral Pd core and surface Ni yield the highest ORR activity with a mass activity of 0.22 A mg_Pd^-1, which is better than those of the conventional Pd₆Ni icosahedra with alloy surfaces or Pd-rich surfaces, and even two times higher than that of the commercial Pt/C (0.11 A mg_Pt^-1), representing one of the best non-Pt electrocatalysts. Simulations reveal that the Pd icosahedra decorated with Ni atoms emerged in the subsurface can weaken the interaction between the adsorbed oxygen and Pd (111) facet and enhance the ORR activities due to an obvious shift of d-band center. More significantly, under electrochemical accelerated durability test, the Pd₆Ni icosahedra can endure at least 10,000 cycles with negligible activity decay and structural change. The present work demonstrates an important advance in surface tuning of bimetallic NCs as high-performance non-Pt catalysts for catalysis, energy conversion, and beyond.

Hydrogen assisted synthesis of branched nickel nanostructures: a combined theoretical and experimental study

The selective adsorption of small molecules over specific facets plays an important role in morphology controlled synthesis of metal nanocrystals. In the present work, hydrogen is found to be a good capping agent for direct synthesis of branched nickel nanocrystals, i.e., secondary branching (Ni-SB) nanoparticles and multipods (Ni-MP). Using ab initio thermodynamics and the Wulff construction principle, it has been found that: (i) in the presence of hydrogen (P_H2 = 6 bar), the facet structure stability follows the order of Ni(100) > Ni(111) > Ni(110), resulting in competitive over-growth along the 〈111〉 and 〈110〉 directions; (ii) with increasing hydrogen pressure, the Ni deposition rate over the crystal surface increases as a result of more Ni²⁺ reduction; the competition between deposition and surface diffusion, therefore, becomes the vital factor for the nanocrystal growth process; (iii) the diffusion energy barrier of a surface Ni atom on Ni(111) is lower than that on Ni(110), especially on hydrogen covered surfaces, indicating that the kinetic over-growth only along the 〈111〉 direction producing Ni-MP will be dominant under P_H2 = 14 bar; (iv) the ab initio based Wulff construction principle predicts the shapes and morphologies at different hydrogen pressures which is further confirmed with HRTEM results. Finally, compared with nickel nanoparticles (Ni-NP) synthesized in the absence of hydrogen, the hydrogen assisted branched Ni nanomaterials, especially the Ni-MP, show higher catalytic activities for hydrogenation reactions of acetophenone and nitrobenzene.

Strain-induced Stranski-Krastanov growth of Pd@Pt core-shell hexapods and octapods as electrocatalysts for methanol oxidation

Bimetallic nanocrystals with a branched shape have received great interest as catalysts due to their unique structures and fascinating properties. However, the conventional synthetic approaches based on the island growth mode often lead to the dendritic nanostructures with inhomogeneous and uncontrolled branches. Here precise control over the number of branches has been realized in the deposition of Pt on Pd seeds through the Stranski-Krastanov growth mechanism. Based on such a growth mode, Pd@Pt core-shell hexapods and octapods have been generated by a seeded growth with Pd octahedra and cubes as the seeds, respectively. We found that Pt atoms are initially deposited on the side faces of Pd seeds through a layer-by-layer epitaxial growth in the presence of oleylamine (OAm), leading to a local strain focused at their corners. These strain-concentrated sites promote the subsequent island growth of Pt atoms at the corners of the Pd seeds, resulting in the Pd@Pt core-shell hexapods or octapods. Both the Pd@Pt core-shell hexapods and octapods exhibit the substantially enhanced catalytic properties in terms of activity and stability towards a methanol oxidation reaction (MOR) relative to the commercial Pt/C. Specifically, the Pd@Pt core-shell hexapods show the highest specific (1.97 mA cm^-2) activity and mass activity (0.52 mA μg_Pt^-1) for the MOR, which are 5.8 and 2.6 times higher than those of the commercial Pt/C, respectively. This enhancement can probably be attributed to their unique structures and the synergistic effect between Pt and Pd.

Surface Coordination Chemistry of Metal Nanomaterials

Surface coordination chemistry of nanomaterials deals with the chemistry on how ligands are coordinated on their surface metal atoms and influence their properties at the molecular level. This Perspective demonstrates that there is a strong link between surface coordination chemistry and the shape-controlled synthesis, and many intriguing surface properties of metal nanomaterials. While small adsorbates introduced in the synthesis can control the shapes of metal nanocrystals by minimizing their surface energy via preferential coordination on specific facets, surface ligands properly coordinated on metal nanoparticles readily promote their catalysis via steric interactions and electronic modifications. The difficulty in the research of surface coordination chemistry of nanomaterials mainly lies in the lack of effective tools to characterize their molecular surface coordination structures. Also highlighted are several model material systems that facilitate the characterizations of surface coordination structures, including ultrathin nanostructures, atomically precise metal nanoclusters, and atomically dispersed metal catalysts. With the understanding of surface coordination chemistry, the molecular mechanisms behind various important effects (e.g., promotional effect of surface ligands on catalysis, support effect in supported metal nanocatalysts) of metal nanomaterials are disclosed.

Facile synthesis of self-assemblies of ultrathin round Pd nanosheets or nanorings and their enhanced electrocatalytic activities

Self-assemblies of ultrathin round Pd nanosheets are fabricated in a facile one-pot process and Pd nanoring self-assemblies are also generated.

One-pot synthesis of hierarchical concave tetrapod Pd nanocrystals and their electrocatalytic properties

Hierarchical concave tetrapod Pd nanocrystals were synthesized by reducing Pd(acac)₂ with CO, and oleylamine was responsible for this morphology.

Controlling Palladium Nanocrystals by Solvent-Induced Strategy for Efficient Multiple Liquid Fuels Electrooxidation

Pd has been considered as the possible economical substitute of rare Pt for catalyzing the liquid fuels electrooxidation reaction. However, the biggest problem of Pd nanocatalysts for alcohol oxidations is that they show the limited stability and activity, greatly impacting the development of liquid fuels-based fuel cell technology. We report herein a new solvent-induced procedure for making distinct Pd NCs with geometry tuning from Pd nanosheets, Pd tetrapods, to Pd concave tetrahedra by switching the solvent from 1-methyl-2-pyrrolidone, formamide, to acetylacetonate. The key features for the preparation of dimension-controlled Pd NCs herein are that the use of molybdenum carbonyl (Mo(CO)6) determines the exposed {111} facet in the final Pd NCs, while different solvents control the reduction kinetics to induce the growth of Pd NCs with distinct morphologies. The as-prepared distinct Pd NCs show the interesting shape-dependent electrocatalytic activities toward multiple liquid fuels electrooxidation reactions including ethylene glycol oxidation reaction, glycerol oxidation reaction, ethanol oxidation reaction, and also methanol oxidation reaction with Pd nanosheets exhibiting higher activity than all the other Pd catalysts and higher activity than the commercial Pd/C and also Pd black due to the thin character of Pd nanosheets. Most importantly, the Pd nanosheets exhibit much higher stability for multiple liquid fuels electrooxidation than all the other Pd catalysts tested. The present work gives the first example in exploring the effect of solvent in tuning the dimensions of Pd NCs, and thus optimizing the electrocatalytic performance for liquid fuels electrooxidation.

Metal Bromide Controlled Interfacial Aromatization Reaction for Shape-Selective Synthesis of Palladium Nanostructures with Efficient Catalytic Performances

Herein, the effect of diverse metal bromides for the shape evolution of palladium nanostructures (Pd NS) has been demonstrated. Aromaticity-driven reduction of bromopalladate(II) is optimized to reproducibly obtain different Pd NS at the water/organic layer interface. In this soft interfacial strategy, a redox potential driven reaction has been performed, forming the thermodynamically more stable (>10(4) -fold) PdBr4 (2-) precursor from PdCl4 (2-) by adding extra metal bromides. In the process, the reductant, Hantzsch dihydropyridine ester (DHPE), is aromatized. Interestingly, alkali metal bromides devoid of coordination propensity exclusively evolve Pd nanowires (Pd NWs), whereas in the case of transition metal bromides the metal ions engage the 'N' donor of DHPE at the interface, making the redox reaction sluggish. Hence, controlled Pd nanoparticles growth is observed, which evolves Pd broccolis (Pd NBRs) and Pd nanorods (Pd NRs) at the interface in the presence of NiBr2 and CuBr2 , respectively, in the aqueous solution. Thus, the effect of diverse metal bromides in the reaction mixture for tailor-made growth of the various Pd NS is reported. Among the as-synthesized materials, the Pd NWs stand to be superior catalysts and their efficiency is almost 6 and 2.5 times higher than commercial 20 % Pd/C in the electrooxidation of ethanol and Cr(VI) reduction reaction by formic acid, respectively.

Formation of palladium concave nanocrystals via auto-catalytic tip overgrowth by interplay of reduction kinetics, concentration gradient and surface diffusion

A clear understanding of the growth mechanism involved in the shape-controlled synthesis of noble-metal nanocrystals with concave surfaces can provide useful information for the rational design of novel anisotropic nanostructures with controllable properties. In this paper, we conducted a systematic study of the detailed growth mechanism of the Pd arrow-headed tripods and revealed how the formation of the concave Pd nanocrystals was collectively controlled by the reduction kinetics, concentration gradient of Pd precursors, and surface diffusion of atoms. The formation of the arrow-headed tripods can be attributed to an auto-catalytic tip overgrowth process, where the Pd triangular nanoplate seeds formed under a suitably slow reduction rate can auto-catalyze the dehydrogenation of benzyl alcohol to generate hydrogen atoms [H]. The presence of [H] further dramatically accelerates the reduction of Pd(acac)2, which introduces a concentration gradient of Pd precursors in our non-stirring synthesis system and facilitates the kinetically-controlled tip overgrowth under a concentration gradient to form tripods with troughs on the arms. The final shapes of the concave nanocrystals depend on the relative rate of atom deposition and surface diffusion of atoms, which can be tuned by manipulating the reaction conditions such as the reaction temperature and the stirring conditions. This study presents a new possibility for the rational synthesis of various Pd nanostructures by manipulating the auto-catalytic process and tuning the relative rate of atom deposition and surface diffusion of atoms, which provides useful information for understanding the growth mechanism and the design of other anisotropic noble-metal nanostructures.

Control of the composition of Pt-Ni electrocatalysts in surfactant-free synthesis using neat N-formylpiperidine

This paper describes the facile and surfactant-free synthesis of faceted Pt-Ni alloy nanoparticle electrocatalysts using neat N-formylpiperidine as a new type of solvent. Unlike the widely-used colloidal synthesis based on long-carbon chain surfactants, nanoparticles made in neat N-formylpiperidine possess a directly accessible surface for electrocatalytic reactions, making it a very attractive alternative solvent. The area-specific oxygen reduction reaction (ORR) activity is much higher than the commercial Pt/C catalyst reference and reaches a maximum of 1.12 mA cm(-2) for the Pt-Ni alloy nanoparticles. We observed that the freshly formed Pt-Ni alloy could have controllable bulk and near surface compositions under the same initial reaction conditions and precursor ratio. The change in the composition could be attributed to the effect of CO on the formation of uniform nuclei at the initial stage, and a different deposition rate between Pt and Ni metals during the growth. The well-defined Pt-Ni nanoparticle catalysts show strong composition-dependent catalytic behavior in ORR, highlighting the important role of controlling the growth kinetics in the preparation of active Pt-Ni ORR catalysts.

Crystallinity-induced shape evolution of Pt–Ag nanosheets from branched nanocrystals

2D Pt–Ag nanosheets and 3D Pt–Ag–Cu tetrapods have been selectively synthesized, which were determined by the crystallinity of the nanoseeds.

Synthesis of Stable Shape-Controlled Catalytically Active β-Palladium Hydride

We have developed an efficient strategy for the production of stable β-palladium hydride (PdH0.43) nanocrystals with controllable shapes and remarkable stability. The as-synthesized PdH0.43 nanocrystals showed impressive stability in air at room temperature for over 10 months, which has enabled the investigation of their catalytic property for the first time. The prepared PdH0.43 nanocrystals served as highly efficient catalysts in the oxidation of methanol, showing higher activity than their Pd counterparts. These studies opened a door for further exploration of β-palladium hydride-based nanomaterials as a new class of promising catalytic materials and beyond.

Seedless Growth of Palladium Nanocrystals with Tunable Structures: From Tetrahedra to Nanosheets

Despite the great success that has been accomplished on the controlled synthesis of Pd nanocrystals with various sizes and morphologies, an efficient approach to systematic production of well-defined Pd nanocrystals without seed-mediated approaches remains a significant challenge. In this work, we have developed an efficient synthetic method to directly produce Pd nanocrystals with a highly controllable feature. Three distinct Pd nanocrystals, namely, Pd nanosheets, Pd concave tetrahedra, and Pd tetrahedra, have been selectively prepared by simply introducing a small amount of ascorbic acid (AA) and/or water without the other synthesis conditions changed. We found that the combined use of AA and water is of importance for the successful production of the unique Pd nanosheets. Detailed catalytic investigations showed that all the obtained Pd nanocrystals exhibit higher activity in the formic acid electrooxidation and styrene hydrogenation with respect to the Pd black, and their activities are highly shape-dependent with Pd nanosheets demonstrating a higher activity than both the Pd concave tetrahedra and Pd tetrahedra, which is likely due to the simple yet important feature of ultrathin thickness of Pd nanosheets. The present work highlights the importance of structures in tuning the related properties of metallic nanocrystals.

Building up strain in colloidal metal nanoparticle catalysts

The focus on surface lattice strain in nanostructures as a fundamental research topic has gained momentum in recent years as scientists investigated its significant impact on the surface electronic structure and catalytic properties of nanomaterials. Researchers have begun to tell a more complete story of catalysis from a perspective which brings this concept to the forefront of the discussion. The nano-'realm' makes the effects of surface lattice strain, which acts on the same spatial scales, more pronounced due to a higher ratio of surface to bulk atoms. This is especially evident in the field of metal nanoparticle catalysis, where displacement of atoms on surfaces can significantly alter the sorption properties of molecules. In part, the concept of strain-engineering for catalysis opened up due to the achievements that were made in the synthesis of a more sophisticated nanoparticle library from an ever-expanding set of methodologies. Developing synthesis methods for metal nanoparticles with well-defined and strained architectures is a worthy goal that, if reached, will have considerable impact in the search for catalysts. In this review, we summarize the recent accomplishments in the area of surface lattice-strained metal nanoparticle synthesis, framing the discussion from the important perspective of surface lattice strain effects in catalysis.