Reversibly Tunable Lower Critical Solution Temperature Utilizing Host–Guest Complexation of Pillar[5]arene with Triethylene Oxide Substituents

Stereoselective Single Step Cyclization to Give Belt-Functionalized Pillar[6]arenes

Two macrocycles were synthesized through cyclization reactions of secondary benzylic alcohols, giving pillar[6]arenes with a methyl substituent at each belt position. These macrocycles form stereoselectively with only the rtctct isomer with alternating up and down orientations of the belt methyl groups definitively identified. Isolated yields were modest (7 and 9%), but the macrocycles are prepared in a single step from either a commercially available alcohol or a very readily prepared precursor. X-ray crystal structures of the macrocycles indicate they have a capsule-like structure, which is far from the conventional pillar shape. Density functional theory calculations reveal that the energy barrier required to obtain the pillar conformation is significantly higher for these belt-functionalized macrocycles than for conventional belt-unfunctionalized pillar[6]arenes.

Selective Fluorescent Sensing for Iron in Aqueous Solution by A Novel Functionalized Pillar[5]arene

Iron ion is one of the most physiologically important elements in metabolic processes, indispensable for all living systems. Since its excess can lead to severe diseases, new approaches for its monitoring in water samples are urgently needed to meet requirements. Here, we firstly report a novel and universal route for the synthesis of a series of pillar[n]arene derivates containing one benzoquinone unit by photocatalysis. With this in hand, an anthracene - appended water - soluble pillar[5]arene (H) with excellent fluorescence sensing potency was prepared. H enabled the ultrasensitive detection of iron ions in aqueous solution with limits of detection of 10-8  M. Over a wide range of metal ions, H exhibited specific selectivity toward Fe3+ . More importantly, H could still properly operate in a simulated sewage sample, coexisting with multiple interference ions.

Synthesis, Optical Properties and Cellular Toxicity of Water-Soluble near Infrared-II Fluorescent Assemblies Based on Pillar[5]arene

The main challenges in second near-infrared region molecular fluorophores are poor water solubility and unknown long-term toxicity at present. Herein, new NIR-II molecular fluorophores have been designed and employed to integrate biocompatible pillar[5]arene with 10 outer triethylene oxide groups for the synthesis of rotaxane IRCR. In addition, PEGylated pillar[5]arenes have been combined for the self-assembly of two supramolecular vesicular systems, i.e., PP5-IR1 and PP5-IR2, affording aqueous solubility and lowered cellular toxicity. In aqueous solution, all these fluorophores displayed room-temperature emission with λmax at 986-1013 nm and quantum yields of 0.54-1.45%. They also exhibited good chemical stability and reasonable self-assembled sizes, which may find potential applications in NIR-II imaging. In addition, PP5-IR1 can be used as a fluorescent chemosensor for selective recognition of glutathione through the cleavage of dinitrophenyl ether and release the fluorescent dye.

Self-assembly of β-cyclodextrin-pillar[5]arene molecules into supramolecular nanoassemblies: morphology control by stimulus responsiveness and host-guest interactions

Macrocyclic molecules have attracted considerable attention as new functional materials owing to their unique pore size structure and excellent host-guest properties. With the development of macrocyclic compounds, the properties of mono-modified macrocyclic materials can be improved by incorporating pillar[n]arene or cyclodextrin derivatives through bridge bonds. Herein, we report the self-assembly of amphiphilic di-macrocyclic host molecules (H1-2) based on β-cyclodextrin and pillar[5]arene units linked by azophenyl or biphenyl groups. In a H₂O/DMSO (19 : 1, v/v) mixed polar solvent, an amphiphile H1 with an azophenyl group self-assembled into unique nanorings and exhibited an obvious photoresponsive colour change. This photochromic behaviour makes H1 suitable for application in carbon paper materials on which arbitrary patterns can be erased and rewritten. The amphiphile H2, with a biphenyl unit, self-assembled into spherical micelles. These differences indicate that various linker units lead to changes in the intermolecular and hydrophilic-hydrophobic interactions. In a CHCl₃/DMSO (19 : 1, v/v) mixed low-polarity solvent, the amphiphile H1 self-assembled into fibrous aggregates, whereas the molecule H2 assembled into unique nanoring aggregates. In this CHCl₃/DMSO mixed solvent system, small nanosheet aggregates were formed by the addition of a guest molecule (G) composed of tetraphenylethene and hexanenitrile groups. With prolonged aggregation time, the small sheet aggregates further aggregated into cross-linked nanoribbons and eventually formed large nanosheet aggregates. The data reveal that the morphology of H1-2 can be controlled by tuning the intermolecular interactions of the molecules via the formation of host-guest complexes. Moreover, the polyhydroxy cyclodextrin unit on H1-2 can be strongly adsorbed on the stationary phase in column chromatography via multiple hydrogen bonds, and the singly modified pillar[5]arenes can be successfully separated by host-guest interactions.

A Biocompatible Liquid Pillar[n]arene-Based Drug Reservoir for Topical Drug Delivery

Advanced external preparations that possess a sustained-release effect and integrate few irritant elements are urgently needed to satisfy the special requirements of topical administration in the clinic. Here, a series of liquid pillar[n]arene-bearing varying-length oligoethylene oxide chains (OEPns) were designed and synthesized. Following rheological property and biocompatibility investigations, pillar[6]arene with triethylene oxide substituents (TEP6) with satisfactory cavity size were screened as optimal candidate compounds. Then, a supramolecular liquid reservoir was constructed from host-guest complexes between TEP6 and econazole nitrate (ECN), an external antimicrobial agent without additional solvents. In vitro drug-release studies revealed that complexation by TEP6 could regulate the release rate of ECN and afford effective cumulative amounts. In vivo pharmacodynamic studies confirmed the formation of a supramolecular liquid reservoir contributed to the accelerated healing rate of a S. aureus-infected mouse wound model. Overall, these findings have provided the first insights into the construction of a supramolecular liquid reservoir for topical administration.

Self-assembled Fluorescent Nanoparticles with Tunable LCST Behavior in Water

The development of stimuli-responsive fluorescent materials in water based on organic molecule has drawn significant interest. Herein, we designed and synthesized an amphiphilic molecule M containing a fixed tetraphenylethylene moiety (FTPE) as hydrophobic part and tri(ethylene glycol) (TEG) chains as hydrophilic part. Notably, the FTPE moiety is aggregation-induced emission (AIE) active, while the TEG chains are thermo-responsive. M can self-assemble into fluorescent nanoparticles (NPs) in water, which showed lower critical solution temperature (LCST) behavior. Moreover, its clouding point can be reversibly tuned upon the concentration variation. Interestingly, the NPs can be acted as a fluorescence thermometer in aqueous media owing to their unique AIE and LCST behaviors. Our work herein not only provides an integration strategy to construct stimuli-responsive fluorescent materials but also shows great potential in biological applications including bioimaging and biosensors.

Hybrid Macrocyclic Polymers: Self-Assembly Containing Cucurbit[m]uril-pillar[n]arene

Supramolecular self-assembly by hybrid macrocycles containing both cucurbit[m]uril (CB[m]) and pillar[n]arene was discussed and summarized in this review. Due to different solubility, diverse-sized cavities, and various driving forces in recognizing guests, the role of CB[m] and pillar[n]arene in such hybrid macrocyclic systems could switch between competitor in capturing specialized guests, and cooperator for building advanced hybridized macrocycles, by controlling their characteristics in host–guest inclusions. Furthermore, both CB[m] and pillar[n]arene were employed for fabricating advanced supramolecular self-assemblies such as mechanically interlocked molecules and supramolecular polymers. In those self-assemblies, CB[m] and pillar[n]arene played significant roles in, e.g., microreactor for catalyzing particular reactions to bridge different small pieces together, molecular “joint” to connect different monomers into larger assemblies, and “stabilizer” in accommodating the guest molecules to adopt a favorite structure geometry ready for assembling.

An amphiphilic water-soluble biphen[3]arene with a tunable lower critical solution temperature behavior

The first amphiphilic water-soluble thermoresponsive biphen[3]arene with a tunable lower critical solution temperature behavior is reported.

Recent Applications of Pillar[n]arene-Based Host-Guest Recognition in Chemosensing and Imaging

Pillar[n]arene is a novel kind of synthetic supramolecular macrocyclic host characterized by its particular pillar-shaped structure consisting of an electron-rich cavity and two finely adjustable rims. Benefiting from its rigid structure, facile synthesis, ease of functionalization, and outstanding host-guest chemistry, pillar[n]arene shows great potential for diverse applications. Significantly, the host-guest recognition of pillar[n]arene provides a novel approach for chemosensing and imaging. Herein, this Review critically and comprehensively reviews the applications of pillar[n]arene-based host-guest recognition in chemosensing and imaging. The sensing and imaging mechanisms as well as the unique roles and advantages of pillar[n]arene-based host-guest recognition are summarized. In addition, preparations of hybrid materials based on pillar[n]arene and inorganic materials are also introduced comprehensively in the light of chemosensing and imaging. Finally, current challenges and perspectives on pillar[n]arene-based host-guest recognition in chemosensing and imaging are outlined.

Aggregation Mode, Host-Guest Chemistry in Water, and Extraction Capability of an Uncharged, Water-Soluble, Liquid Pillar[5]arene Derivative

An uncharged, water-soluble per-ethylene-glycol pillar[5]arene derivative (1) was synthesized and its aggregation mode, host-guest chemistry in water and extraction ability was explored. Compound 1 is a liquid at room temperature; in water, limited self-aggregation occurred at high concentrations as deduced from diffusion NMR and dynamic light scattering. Compound 1 forms pseudo-rotaxane-like 1 : 1 host-guest complexes with 1,ω-di-substituted alkanes with association constants on the order of 103 -104  m-1 . Interestingly, NMR experiments showed that the guest location relative to the host ring system differs among the different complexes. In proof-of-concept experiments, compound 1 was shown to extract structurally related organic compounds from benzene into water with significant selectivity. Compound 1, which is a liquid at room temperature and has only limited interactions with its side arms, can, in principle, be regarded as a complement to or as a kind of type I porous liquid.

A crystallization driven thermoresponsive transition in a liquid crystalline polymer

A new thermoresponsive transition in a liquid crystalline polymer is found and the reason leading to the thermoresponse is discussed.

pH-Responsive Host-Guest Complexations Between a Water-Soluble Pillar[6]arene Dodecyl-Ammonium Chloride and Aromatic Sulfonic Acids

In the present work, new host-guest binding motifs based on a water-soluble pillar[6]arene dodecyl-ammonium chloride (CP6) with two aromatic sulfonic acids in aqueous media were fabricated. In accordance with the integrated results of ¹H NMR, 2D NOESY, and florescence titration experiments, it was demonstrated that the host-guest binding of CP6 with the two aromatic sulfonic acids in aqueous solution not only has high binding constants but also has pH-responsiveness.

Photoinduced repetitive separation of a supramolecular assembly composed of an amphiphilic diarylethene mixture

A supramolecular assembly composed of a two-component mixture of amphiphilic diarylethenes, which have octyloxycarbonyl and N-octylcarbamoyl groups, showed a unique macroscopic transformation upon irradiation with UV light and subsequent standing in the dark. Unlike the pure compounds, the assembly was repetitively separated into a blue sphere and a red-purple sparse structure. Both the blue sphere and the sparse structure turned into colorless spheres upon irradiation with visible light and the divided colorless spheres showed the same response to UV and visible light. Phase diagrams based on the change in absorption spectra upon temperature change suggested that the transformation originates from a LCST transition. In the 0.5 : 0.5 mixture, in contrast to the pure compounds, the transition temperature sharply changed at around 50% of the fraction of the closed-ring isomer. TEM imaging showed that the 0.5 : 0.5 mixture with high photoisomerization yield formed a 10 nm-sized network. Judging from the phase diagram and TEM images, the separation is understood as the local phase transition of the regions with a high fraction of the closed-ring isomer.

pH/Redox-Controlled Interaction between Lipid Membranes and Peptide Derivatives with a "Helmet"

How to reduce the cytotoxicity of antitumor peptides to normal cells remains an ongoing challenge. Here, we designed a pH/redox-responsive supramolecular structure (Pep-V⊂P-PEG) composed of a peptide modified with viologen (Pep-V) and polyethylene glycol bearing pillar[5]arene (P-PEG) as a "helmet". By shielding the hydrophobic moiety of the peptide derivative with pillar[5]arene via host-guest interactions, its disruption on normal cells can be effectively reduced. At acidic pH, the supramolecular structure can selectively adsorb onto negatively charged lipid membranes because of electrostatic interactions. Owing to redox responsiveness of the viologen group, Pep-V could be separated from P-PEG after the addition of reductants and inserted into lipid bilayers, which leads to membrane disruption. Cargo leakage of liposome models was investigated to understand Pep-V⊂P-PEG-induced liposomal membrane disruption under different pH values and redox conditions. Results showed that Pep-V⊂P-PEG caused almost no cargo leakage from (1,2-dipalmitoyl-sn-glycerol-3-phosphocholine) liposomes at pH 7.4 but significant leakage from negatively charged (1,2-dipalmitoyl-sn-glycerol-3-phospho-(1-rac-glyerol)) liposomes at pH 5.0 under a reducing environment. Pep-V⊂P-PEG displayed low destructive effects on mimic normal cells and significant disruption to mimic tumor cells when exposed to a reducing environment that is expected to be a potential antitumor agent.

Host-Guest Chemistry in Supramolecular Theranostics

Macrocyclic hosts, such as cyclodextrins, calixarenes, cucurbiturils, and pillararenes, exhibit unparalleled advantages in disease diagnosis and therapy over the past years by fully taking advantage of their host-guest molecular recognitions. The dynamic nature of the non-covalent interactions and selective host-guest complexation endow the resultant nanomaterials with intriguing properties, holding promising potentials in theranostic fields. Interestingly, the differences in microenvironment between the abnormal and normal cells/tissues can be employed as the stimuli to modulate the host-guest interactions, realizing the purpose of precise diagnosis and specific delivery of drugs to lesion sites. In this review, we summarize the progress of supramolecular theranostics on the basis of host-guest chemistry benefiting from their fantastic topological structures and outstanding supramolecular chemistry. These state-of-the-art examples provide new methodologies to overcome the obstacles faced by the traditional theranostic systems, promoting their clinical translations.

Acid/base- and base/acid-switchable complexation between anionic-/cationic-pillar[6]arenes and a viologen ditosylate salt

Two new host-guest complexes between water-soluble anionic pillar[6]arene (WP6) or cationic pillar[6]arene (CP6) and a viologen ditosylate salt G·2TsO were constructed, among which one formed from WP6 and G2+ ions can be controlled by the sequential addition of an acid and a base (HCl and NaOH, respectively), whereas the other fabricated from CP6 and TsO- ions can be switched through the sequential addition of basic and acidic reagents (NaOH and HCl, respectively).

LCST phase behavior of benzo-21-crown-7 with different alkyl chains

The introduction of hydrophobic units into crown ethers can dramatically decrease the critical transition temperature of LCST and realize macroscopic phase separation at low to moderate temperature and concentration. Minor modifications in the chemical structure of crown ethers (benzo-21-crown-7, B21C7s) can effectively control the thermo-responsive properties.

Visualizing the Initial Step of Self-Assembly and the Phase Transition by Stereogenic Amphiphiles with Aggregation-Induced Emission

Many highly ordered structures with smart functions are generated by self-assembly with stimuli responsiveness. Despite that electron microscopes enable us to directly observe the end products, it is hard to visualize the initial step and the kinetic stimuli-responsive behavior of self-assembly. Here, we report the design and synthesis of stereogenic amphiphiles, namely, ( Z)-TPE-OEG and ( E)-TPE-OEG, with aggregation-induced emission (AIE) characteristics from the hydrophobic tetraphenylethene core and thermoresponsive behavior from the hydrophilic oligoethylene glycol monomethyl ether chain. The two isomers can be easily isolated by high-performance liquid chromatography and characterized by 2D NMR spectroscopy. While ( Z)-TPE-OEG self-assembles into vesicles, its ( E)-cousin forms micelles in water. The initial step of their self-assembly processes can be visualized based on AIE characteristics, with a sensitivity much higher than the method based on transmittance measurement. The entrapment and release capabilities of the ( Z)-stereogenic amphiphile are demonstrated by employing pyrene as a guest. The thermoresponsive behavior of the ( Z)-amphiphile results in its continuous phase transition from microscopic self-assembly to macroscopic aggregation, which is successfully visualized in situ by confocal laser scanning microscopy accompanied by the AIE technique. Such a kinetic process shows different stages according to the microscopic visualization, and these stages have never been monitored through roughly observing the appearance of precipitates. It is anticipated that this study can deepen the understanding of the self-assembly processes for better monitoring and controlling them in different systems.

A degradable low molecular weight monomer system with lower critical solution temperature behaviour in water

A degradable thermo-responsive system was prepared and investigated. The degradation behaviour induced by the cleavage process of the thermo-sensitive crown ethers effectively altered the thermo-responsiveness.

LCST behavior controlled by size-matching selectivity from low molecular weight monomer systems

LCST behavior was controlled by crown ether–cation recognition motifs via size-matching selectivity.

A [2]pseudorotaxane based on a pillar[6]arene and its application in the construction of a metallosupramolecular polymer

A novel metallosupramolecular polypseudorotaxane was constructed by pillar[6]arene-based host–guest recognition and metal coordination.

Restricting shuttling in bis(imidazolium)…pillar[5]arene rotaxanes using metal coordination

Metal coordination to a series of bis (imidazolium)…pillar[5]arene [2]rotaxanes through the formation of metal-carbene bonds facilitates a new strategy to restrict the shuttling motion in [2]rotaxanes. Whereas the pillar[5]arene macrocycle rapidly shuttles along the full length of the bis (imidazolium) rod for the parent [2]rotaxane, Ag(i) coordination to the imidazolium groups through the formation of N-heterocyclic carbenes leads to restricted motion, effectively confining the shuttling motion of the [2]rotaxane. The Ag(i) coordinated [2]rotaxanes can be reacted further, either removing the Ag-carbene species to recreate the parent [2]rotaxane, or reaction with more bulky Pd(ii) species to further restrict the shuttling motion through steric inhibition.

Supramolecular delivery systems based on pillararenes

Supramolecular delivery systems (SDSs) fabricated via molecular assembly, which conveniently allow integration of multiple functions in a single system and structural diversity of systems, are a very active research area due to their enormous potential in biomedical applications, including drug delivery, cell imaging, diagnosis, and release monitoring. Pillararenes, a novel type of macrocyclic molecule, are gaining increasing interest as an important component in the construction of SDSs due to their unique structural and chemical properties. This feature article summarizes pillararene-based SDSs constructed via host-guest interactions via four strategies: (1) supramolecular host-guest complexation; (2) self-assembly of supramolecular amphiphiles; (3) self-assembly of amphiphilic supramolecular polymer conjugates; (4) hybridization with other porous materials, such as inorganic materials and metal-organic frameworks (MOFs). The various SDSs based on pillararenes for the delivery of different cargoes from anti-cancer drugs, fluorescent molecules, siRNAs, and insulin to antibiotics are reviewed. Furthermore, future challenges for advanced SDSs based on pillararenes and their broader applications are outlined.

Multiresponsive Supramolecular Theranostic Nanoplatform Based on Pillar[5]arene and Diphenylboronic Acid Derivatives for Integrated Glucose Sensing and Insulin Delivery

A closed-loop "smart" insulin delivery system with the capability to mimic pancreatic cells will be highly desirable for diabetes treatment. This study reports a multiple stimuli-responsive insulin delivery platform based on an explicit supramolecular strategy. Self-assembled from a well-designed amphiphilic host-guest complex formed by pillar[5]arene and a diphenylboronic acid derivative and loaded with insulin and glucose oxidase, the obtained insulin-GOx-loaded supramolecular vesicles can selectively recognize glucose, accompanied by the structure disruption and efficient release of the entrapped insulin triggered by the high glucose concentration as well as the in situ generated H₂ O₂ and acid microenvironment during the GOx-promoted specific oxidation of glucose into gluconic acid. Moreover, such a "smart" supramolecular theranostic nanoplatform is able to function as both a glucose sensor and a controlled insulin delivery actuator. In vivo experiments further demonstrate that this smart supramolecular nanocarrier shows fast response to hyperglycemic circumstances and can effectively regulate the glucose levels in a mouse model of type I diabetes.

An amphiphilic pseudo[1]catenane: neutral guest-induced clouding point change

The hydrophobic/hydrophilic ratio in a molecule largely affects its assembled properties in aqueous media. In this study, we synthesized a new bicyclic compound which could dynamically change its hydrophobic/hydrophilic ratio by chemical stimulus. The bicyclic compound consisted of amphiphilic pillar[5]arene and hydrophobic alkyl chain rings, and formed a self-inclusion structure in aqueous media, which was assigned as a pseudo[1]catenane structure. The hydrophobic chain ring was hidden inside the pillar[5]arene cavity in the pseudo[1]catenane structure, thus the bicyclic compound was soluble in water at 20 °C with a clouding point at 24 °C. The pseudo[1]catenane was converted to the de-threaded structure upon addition of the neutral guest 1,4-dicyanobutane, which displaced the alkyl chain ring from the inside to the outside of the cavity. The hydrophobic alkyl chain ring was now exposed to the aqueous media, causing aggregation of the hydrophobic alkyl chain rings, which induced insolubilization of the bicyclic compound in aqueous media at 20 °C and a decrease in its clouding point.

Stimuli-Responsive Supramolecular Assemblies Constructed from Pillar[ n]arenes

Supramolecular assemblies are constructed from at least two molecules through various noncovalent bonding modes such as hydrogen bonding, cationic-anionic electrostatic interactions, aromatic interactions, metal-ligand bonding, hydrophobic-hydrophilic interactions, and charge-transfer interactions. Owing to the dynamic and reversible nature of these noncovalent bonds, the assembly and disassembly of these molecules are dynamic and reversible. Molecules self-assemble to form the most conformationally and thermally stable structures through these noncovalent interactions. The formation of these noncovalent interactions is affected by the properties of the environment such as its polarity, temperature, and pressure; thus, the structure of the assembled compounds is determined by the environment. The sizes and shapes of the supramolecular assemblies play an important role in determining their functions. Therefore, controlling their size and shape is important. Introducing stimuli-responsive groups into supramolecular assemblies is a useful way to control their size and shape. Controlling supramolecular structures and motions with external stimuli, i.e., periodic and rotational motions on the molecular scale, structures, and molecular weights at the nano- and micrometer scales, visible shrinking/expansion, and adhesive behavior at a macroscopic scale, is very useful. Macrocyclic host molecules are useful building blocks for the construction of stimuli-responsive supramolecular assemblies because their host ability can be tuned by changing the shape and electron density of the cavity. The size-dependent hosting ability of the cavity is similar to the lock-and-key model in biological systems. Stimuli-responsive supramolecular assemblies have been developed by using macrocyclic compounds such as cyclodextrins, cucurbit[ n]urils, calix[ n]arenes, crown ethers, and related macrocycles. We successfully developed new pillar-shaped macrocyclic hosts in 2008, which were coined pillar[ n]arenes. The unique structural features of pillar[ n]arenes allowed new properties. This year, 2018, marks one decade of research into pillar[ n]arene chemistry, and in that time the properties of pillar[ n]arenes have been widely investigated by various scientists. Thanks to their efforts, the characteristic properties of pillar[ n]arenes that result from their pillar-shaped structures have been elucidated. Their host ability, the chirality of their pillar-shaped structure, and their versatile functionality are unique features of pillar[ n]arenes not seen in other well-known hosts, and these properties are very useful for the creation of new stimuli-responsive supramolecular assemblies. In this Account, we describe photo-, pH- and redox-responsive supramolecular assemblies based on pillar[ n]arenes. First, we discuss molecular-scale stimuli-responsive supramolecular assemblies, i.e., pseudorotaxanes, pseudocatenanes, and supramolecular polymers. We also highlight subnanometer- and micrometer-scale stimuli-responsive supramolecular assembles such as particles and vesicles. Finally, we discuss the macroscopic stimuli-responsive structural changes of surfaces and gels. This Account will provide useful information for researchers working on not only pillar[ n]arene chemistry but also the chemistry of other macrocyclic hosts, and it will inspire new discoveries in the field of supramolecular assemblies and systems containing macrocyclic hosts.

Supramolecular control over pillararene-based LCST phase behaviour

Based on the supramolecular interactions between pillar[5]arenes and ionic liquids, supramolecular control was successfully introduced into thermo-responsive systems to adjust LCST phase behaviour in water.

[Synthesis, Aggregation, Self-assembly, and Dynamic Properties of Helicene Oligomers]

 Biological systems exhibit dynamic phenomena at the macroscopic level as a result of the hierarchical integration of phenomena at the molecular level. For example, a number of amino acids compose actin proteins, which form three-dimensional structures determined by the sequence of amino acids. They form fibers by self-assembly, which then form ordered structures such as meshes, lyotropic liquid crystals (LCs), and bundles. The dynamic and reversible polymorphism between these nano- to centimeter-sized ordered structures is essential for biological functions such as cell division, contraction, and locomotion. To understand biological systems and create new functional materials, it is essential to develop a methodology to integrate phenomena at the molecular level into those at the macroscopic level using synthetic molecules. In this research, synthetic oligomers containing helicenes, which exhibit reversible structural transitions between cylindrical double helices and random coils in response to thermal stimuli, were employed as building blocks for the development of such a methodology. The properties of homo- and hetero-double helices at the molecular level were first controlled by taking advantage of the diversity of their molecular structures. Then, nano- to micrometer-sized structures were constructed by the self-assembly of hetero-double helices, which include fibers/gels, vesicles, and lyotropic LCs, and their dynamic properties were controlled by molecular design.

Multi-modulation for self-assemblies of amphiphilic rigid-soft compounds through alteration of solution polarity and temperature

A new class of small molecule-based amphiphilic carbazole-containing compounds has been designed and synthesized. Detailed analysis of the temperature- and solvent-dependent UV-vis absorption spectra has provided insights into the cooperative self-assembly mechanism of the carbazole-containing compounds. Interestingly, the prepared amphiphilic rigid-soft compounds were also found to display a lower critical solution temperature (LCST) behavior in aqueous solution, which is relatively less explored in small molecule-based materials, leading to promising candidates for the design of a new class of thermo-responsive materials.

Bis- and mono(m-benzoic acid)-functionalized pillar[5]arenes

Installation of m-benzoic acid functionalities on pillar[5]arene rims resulted in bis- and mono(m-benzoic acid)-functionalized pillar[5]arenes 1 and 2. Bis(m-benzoic acid)-functionalized pillar[5]arene 1 was able to self-assemble to form one-dimensional channels with DMF molecules residing in pillar[5]arene cavities. Esterification of two carboxylic acids in 1 with decane-1,10-diol did not afford a [1]catenane, but a bicyclic compound. Although 1-decanol esterification of mono(m-benzoic acid)-functionalized pillar[5]arene 2 did not form a self-included [1]pseudorotaxane-like structure, a mono(decyl m-benzoate)-functionalized pillar[5]arene bearing an ethyl acetate chain was found to form a self-included complex with the ethyl acetate moiety residing inside the pillar[5]arene cavity.

Dual-pH responsive host–guest complexation between a water-soluble pillar[9]arene and a 2,7-diazapyrenium salt

The host–guest complexation between a water-soluble pillar[9]arene and a 2,7-diazapyrenium salt not only can be controlled by the sequential addition of an acid and a base but also can be switched through the sequential addition of a base and an acid.

Carboxylatopillar[n]arenes: a versatile class of water soluble synthetic receptors

Carboxylatopillar[n]arenes (CP[n]As, n = 5, 6, 7, 9, 10) constitute a family of water soluble synthetic receptors. These receptors are excellent hosts for a wide range of cationic organic molecules and have shown promising application in the fields of stimuli-responsive supramolecular assemblies, targeted drug delivery vehicles and sensors. Analogous metal-coordinated prismatic structures have shown excellent affinities for analytes.

Preparation and crystal structures of charge-transfer complexes of acyclic host molecules bearing pyrogallol derivatives with paraquat

The complexation of paraquat with adamantane-based molecules possessing two or three pyrogallol derivatives as acyclic host molecules afforded charge-transfer cocrystals with a 2 : 1 host : guest complexation stoichiometry through noncovalent interactions.