Quantitating the Lattice Strain Dependence of Monolayer Pt Shell Activity toward Oxygen Reduction

d-Electrons of Platinum Alloy Steering CO Pathway for Low-Charge Potential Li-CO2 Batteries

Aprotic Li-CO2 batteries suffer from sluggish solid-solid co-oxidation kinetics of C and Li2CO3, requiring extremely high charging potentials and leading to serious side reactions and poor energy efficiency. Herein, we introduce a novel approach to address these challenges by modulating the reaction pathway with tailored Pt d-electrons and develop an aprotic Li-CO2 battery with CO and Li2CO3 as the main discharge products. Note that the gas-solid co-oxidation reaction between CO and Li2CO3 is both kinetically and thermodynamically more favorable. Consequently, the Li-CO2 batteries with CoPt alloy-supported on nitrogen-doped carbon nanofiber (CoPt@NCNF) cathode exhibit a charging potential of 2.89 V at 50 μA cm-2, which is the lowest charging potential to date. Moreover, the CoPt@NCNF cathode also shows exceptional cycling stability (218 cycles at 50 μA cm-2) and high energy efficiency up to 74.6 %. Comprehensive experiments and theoretical calculations reveal that the lowered d-band center of CoPt alloy effectively promotes CO desorption and inhibits further CO reduction to C. This work provides promising insights into developing efficient and CO-selective Li-CO2 batteries.

Hierarchical PtCuMnP Nanoalloy for Efficient Hydrogen Evolution and Methanol Oxidation

The higher amount of Pt usage and its poisoning in methanol oxidation reaction in acidic media is a major setback for methanol fuel cells. Herein, a promising dual application high-performance electrocatalyst has been developed for hydrogen evolution and methanol oxidation. A low Pt-content nanoalloy co-doped with Cu, Mn, and P is synthesized using a modified solvothermal process. Initially, ultrasmall ≈2.9 nm PtCuMnP nanoalloy is prepared on N-doped graphene-oxide support and subsequently, it is characterized using several analytical techniques and examined through electrochemical tests. Electrochemical results show that PtCuMnP/N-rGO has a low overpotential of 6.5 mV at 10 mA cm-2 in 0.3 m H2SO4 and high mass activity for the hydrogen evolution reaction. For the methanol oxidation reaction, the PtCuMnP/N-rGO electrocatalyst exhibits robust performance. The mass activity of PtCuMnP/N-rGO is 6.790 mA mg-1 Pt, which is 7.43 times higher than that of commercial Pt/C (20% Pt). Moreover, in the chronoamperometry test, PtCuMnP/N-rGO shows exceptionally good stability and retains 72% of the initial current density even after 20,000 cycles. Furthermore, the PtCuMnP/N-rGO electrocatalyst exhibits outstanding performance for hydrogen evolution and methanol oxidation along with excellent anti-poisoning ability. Hence, the developed bifunctional electrocatalyst can be used efficiently for hydrogen evolution and methanol oxidation.

Unleashing the potential of Li-O2 batteries with electronic modulation and lattice strain in pre-lithiated electrocatalysts

Efficient catalysts are indispensable for overcoming the sluggish reaction kinetics and high overpotentials inherent in Li-O2 batteries. However, the lack of precise control over catalyst structures at the atomic level and limited understanding of the underlying catalytic mechanisms pose significant challenges to advancing catalyst technology. In this study, we propose the concept of precisely controlled pre-lithiated electrocatalysts, drawing inspiration from lithium electrochemistry. Our results demonstrate that Li+ intercalation induces lattice strain in RuO2 and modulates its electronic structure. These modifications promote electron transfer between catalysts and reaction intermediates, optimizing the adsorption behavior of Li-O intermediates. As a result, Li-O2 batteries employing Li0.52RuO2 exhibit ultrahigh energy efficiency, long lifespan, high discharge capacity, and excellent rate performance. This research offers valuable insights for the design and optimization of efficient electrocatalysts at the atomic level, paving the way for further advancements in Li-O2 battery technology.

Strain Engineering for Electrocatalytic Overall Water Splitting

Strain engineering is a novel method that can achieve superior performance for different applications. The lattice strain can affect the performance of electrochemical catalysts by changing the binding energy between the surface-active sites and intermediates and can be affected by the thickness, surface defects and composition of the materials. In this review, we summarized the basic principle, characterization method, introduction strategy and application direction of lattice strain. The reactions on hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are focused. Finally, the present challenges are summarized, and suggestions for the future development of lattice strain in electrocatalytic overall water splitting are put forward.

Structure-driven tuning of catalytic properties of core-shell nanostructures

The annual increase in demand for renewable energy is driving the development of catalysis-based technologies that generate, store and convert clean energy by splitting and forming chemical bonds. Thanks to efforts over the last two decades, great progress has been made in the use of core-shell nanostructures to improve the performance of metallic catalysts. The successful preparation and application of a large number of bimetallic core-shell nanocrystals demonstrates the wide range of possibilities they offer and suggests further advances in this field. Here, we have reviewed recent advances in the synthesis and study of core-shell nanostructures that are promising for catalysis. Particular attention has been paid to the structural tuning of the catalytic properties of core-shell nanostructures and to theoretical methods capable of describing their catalytic properties in order to efficiently search for new catalysts with desired properties. We have also identified the most promising areas of research in this field, in terms of experimental and theoretical studies, and in terms of promising materials to be studied.

Symmetry-Induced Regulation of Pt Strain Derived from Pt3 Ga Intermetallic for Boosting Oxygen Reduction Reaction

Pt-based fuel cell catalysts with excellent activity and stability for proton-exchange membrane fuel cells (PEMFCs) have been developed through strain regulation in recent years. Herein, this work demonstrates that symmetry-induced strain regulation of Pt surface of PtGa intermetallic compounds can greatly enhance the catalytic performance of the oxygen reduction reaction (ORR). With the strain environment varies derived from the lattice mismatch of analogous PtGa core but different symmetry, the Pt surface of the PtGa alloy and the Pt3 Ga (Pm3 ¯ $\bar{3}$ m) precisely realize 0.58% and 2.7% compressive strain compared to the Pt3 Ga (P4/mmm). Experimental and theoretical results reveal that when the compressive stress of the Pt lattice increases, the desorption process of O* intermediates becomes accelerated, which is conducive to oxygen reduction. The Pt3 Ga (Pm3 ¯ $\bar{3}$ m) with high symmetry and compressive Pt surface exhibit the highest mass and specific activities of 2.18 A mgPt -1 and 5.36 mA cm-2 , respectively, which are more than one order of magnitude higher than those of commercial Pt/C catalysts. This work demonstrates that material symmetry can be used to precisely modulate Pt surface stress to enhance the ORR, as well as provide a distinct platform to investigate the relationship between Pt compressibility and catalytic activity.

Lattice Compression Revealed at the ≈1 nm Scale

Lattice tuning at the ≈1 nm scale is fascinating and challenging; for instance, lattice compression at such a minuscule scale has not been observed. The lattice compression might also bring about some unusual properties, which waits to be verified. Through ligand induction, we herein achieve the lattice compression in a ≈1 nm gold nanocluster for the first time, as detected by the single-crystal X-ray crystallography. In a freshly synthesized Au52 (CHT)28 (CHT=S-c-C6 H11 ) nanocluster, the lattice distance of the (110) facet is found to be compressed from 4.51 to 3.58 Å at the near end. However, the lattice distances of the (111) and (100) facets show no change in different positions. The lattice-compressed nanocluster exhibits superior electrocatalytic activity for the CO2 reduction reaction (CO2 RR) compared to that exhibited by the same-sized Au52 (TBBT)32 (TBBT=4-tert-butyl-benzenethiolate) nanocluster and larger Au nanocrystals without lattice variation, indicating that lattice tuning is an efficient method for tailoring the properties of metal nanoclusters. Further theoretical calculations explain the high CO2 RR performance of the lattice-compressed Au52 (CHT)28 and provide a correlation between its structure and catalytic activity.

Lattice-Strain Engineering for Heterogenous Electrocatalytic Oxygen Evolution Reaction

The energy efficiency of metal-air batteries and water-splitting techniques is severely constrained by multiple electronic transfers in the heterogenous oxygen evolution reaction (OER), and the high overpotential induced by the sluggish kinetics has become an uppermost scientific challenge. Numerous attempts are devoted to enabling high activity, selectivity, and stability via tailoring the surface physicochemical properties of nanocatalysts. Lattice-strain engineering as a cutting-edge method for tuning the electronic and geometric configuration of metal sites plays a pivotal role in regulating the interaction of catalytic surfaces with adsorbate molecules. By defining the d-band center as a descriptor of the structure-activity relationship, the individual contribution of strain effects within state-of-the-art electrocatalysts can be systematically elucidated in the OER optimization mechanism. In this review, the fundamentals of the OER and the advancements of strain-catalysts are showcased and the innovative trigger strategies are enumerated, with particular emphasis on the feedback mechanism between the precise regulation of lattice-strain and optimal activity. Subsequently, the modulation of electrocatalysts with various attributes is categorized and the impediments encountered in the practicalization of strained effect are discussed, ending with an outlook on future research directions for this burgeoning field.

Observing the Structural Evolution of Quasi-Monolayer Pt Shell on Pd Core in the Electrocatalytic Oxygen-Reduction Reaction

The use of a quasi-monolayer Pt shell (Ptqms) on a Pd core (Pdc) can reach cost and activity targets for the electrocatalytic oxygen-reduction reaction (ORR). The structure of PdcPtqms in the ORR will vary; however, direct observation of this issue is scarce. Here, during cyclic staircase voltammetry (ranging from 0.5 to 1.15 VRHE) in 0.1 M O2-saturated HClO4, the structure of PdcPtqms was monitored by in situ X-ray absorption spectroscopy. The qualitative and quantitative structural information clearly exhibits a complete picture that Ptqms will directly restructure to form Pt clusters and holes, while Pdc almost remains stable. These findings identify the initial structural evolution of PdcPtqms in the ORR, highlighting the importance of protecting Pdc in the development of high-performance PdcPtqms electrocatalysts.

Palladium cubes with Pt shell deposition for localized surface plasmon resonance enhanced photodynamic and photothermal therapy of hypoxic tumors

Multifunctional phototherapy nanoagents for imaging-guided synergistic photothermal therapy (PTT) and photodynamic therapy (PDT) are highly desirable in the field of solid tumor therapy. Nevertheless, the tumor microenvironment (TME) inherently associated with hypoxia significantly hampers the photodynamic effect of these multifunctional nanoagents. Herein, Pd nanocubes coated with an ultrathin Pt shell were prepared and further conjugated with fluorescein labeled and thiol functionalized polyethylene glycol (FITC-PEG-SH) (denoted as Pd@Pt-PEG). The deposition of a Pt shell on Pd nanocubes not only enhances the photothermal performance, exhibiting excellent hyperthermia outcomes and impressive photothermal (PT) imaging quality, but also leads to the formation of singlet oxygen (¹O₂) induced by plasmonic excitation. In the meantime, the catalytic activity of the Pt layer is enhanced by electronic coupling and the plasmonic effect, which induces the decomposition of endogenous overexpressed hydrogen peroxide (H₂O₂) in tumors to generate O₂ for conquering TME and augmenting ¹O₂ generation for efficacious tumor cell apoptosis. The modification of FITC-PEG-SH improves the biocompatibility and provides outstanding fluorescence (FL) imaging properties. Upon NIR laser irradiation, Pd@Pt-PEG allows in situ O₂ generation and dual-mode imaging-guided synergistic PTT/PDT that effectively kills hypoxic tumor cells, which makes it a promising nanotherapeutic agent for enhanced tumor therapy.

Construction of Lattice Strain in Bimetallic Nanostructures and Its Effectiveness in Electrochemical Applications

Bimetallic nanocrystals (NCs), associated with various surface functions such as ligand effect, ensemble effect, and strain effect, exhibit superior electrocatalytic properties. The stress-induced surface strain effect can alter binding strength between the surface active sites and reactants as well as their intermediates, and the electrochemical performance of bimetallic NCs can be significantly facilitated by the lattice-strain modification via their morphologies, sizes, shell-thickness, surface defectiveness as well as compositions. In this review, an overview of fundamental principles, characterization techniques, and quantitative determination of the surface lattice strain is provided. Various strategies and synthesis efforts on creating lattice-strain-engineered bimetallic NCs, including the de-alloying process, atomic layer-by-layer deposition, thermal treatment evolution, one-pot synthesis, and other efforts are also discussed. It is further outlined how the lattice strain effect promotes electrochemical catalysis through the selected case studies. The reactions on oxygen reduction reaction, small molecular oxidation, water splitting reaction, and electrochemical carbon dioxide reduction reactions are focused. In particular, studies of lattice strain arisen from core-shell nanostructure and defectiveness are highlighted. Lastly, the potential challenges are summarized and the prospects of lattice-strain-based engineering on bimetallic nanocatalysts with suggestion and guidance of the future electrocatalyst design are envisioned.

Exploring Strategies toward Synthetic Precision Control within Core-Shell Nanowires

ConspectusAchieving precision and reproducibility in terms of physical structure and chemical composition within arbitrary nanoscale systems remains a "holy grail" challenge for nanochemistry. Because nanomaterials possess fundamentally distinctive size-dependent electronic, optical, and magnetic properties with wide-ranging applicability, the ability to produce homogeneous and monodisperse nanostructures with precise size and shape control, while maintaining a high degree of sample quality, purity, and crystallinity, remains a key synthetic objective. Moreover, it is anticipated that the methodologies developed to address this challenge ought to be reasonably simple, scalable, mild, nontoxic, high-yield, and cost-effective, while minimizing reagent use, reaction steps, byproduct generation, and energy consumption.The focus of this Account revolves around the study of various types of nanoscale one-dimensional core-shell motifs, prepared by our group. These offer a compact structural design, characterized by atom economy, to bring together two chemically distinctive (and potentially sharply contrasting) material systems into contact within the structural context of an extended, anisotropic configuration. Herein, we describe complementary strategies aimed at resolving the aforementioned concerns about precise structure and compositional control through the infusion of careful "quantification" and systematicity into customized, reasonably sustainable nanoscale synthetic protocols, developed by our group. Our multipronged approach involved the application of (a) electrodeposition, (b) electrospinning, (c) a combination of underpotential deposition and galvanic displacement reactions, and (d) microwave-assisted chemistry to diverse core-shell model systems, such as (i) carbon nanotube-SiO₂ composites, (ii) SnO₂/TiO₂ motifs, (iii) ultrathin Pt-monolayer shell-coated alloyed metal core nanowires, and (iv) Cu@TiO₂ nanowires, for applications spanning optoelectronics, photocatalysis, electrocatalysis, and thermal CO₂ hydrogenation, respectively.In so doing, over the years, we have reported on a number of different characterization tools involving spectroscopy (e.g., extended X-ray absorption fine structure (EXAFS) spectroscopy) and microscopy (e.g., high-resolution transmission electron microscopy (HRTEM) and atomic force microscopy (AFM)) for gaining valuable insights into the qualitative and quantitative nature of not only the inner core and outer shell themselves but also their intervening interface. While probing the functional catalytic behavior of a few of these core-shell structures under realistic operando conditions, using dynamic, in situ characterization techniques, we found that local and subtle changes in chemical composition and physical structure often occur during the reaction process itself. As such, nuanced differences in atomic packing, facet exposure, degree of derivatization, defect content, and/or extent of crystallinity can impact upon observed properties with tangible consequences for performance, mechanism, and durability.

Formation Mechanism and Gram-Scale Production of PtNi Hollow Nanoparticles for Oxygen Electrocatalysis through In Situ Galvanic Displacement Reaction

Galvanic displacement reaction has been considered a simple method for fabricating hollow nanoparticles. However, the formation of hollow interiors in nanoparticles is not easily achieved owing to the easy oxidization of transition metals, which results in mixed morphologies, and the presence of surfactants on the nanoparticle surface, which severely deteriorates the catalytic activity. In this study, we developed a facile gram-scale methodology for the one-pot preparation of carbon-supported PtNi hollow nanoparticles as an efficient and durable oxygen reduction electrocatalyst without using stabilizing agents or additional processes. The hollow structures were evolved from sacrificial Ni nanoparticles via an in situ galvanic displacement reaction with a Pt precursor, directly following a preannealing process. By sampling the PtNi/C hollow nanoparticles at various reaction times, the structural formation mechanism was investigated using transmission electron microscopy with energy-dispersive X-ray spectroscopy mapping/line-scan profiling. We found out that the structure and morphology of the PtNi hollow nanoparticles were controlled by the acidity of the metal precursor solution and the nanoparticle core size. The synthesized PtNi hollow nanoparticles acted as an oxygen reduction electrocatalyst, with a catalytic activity superior to that of a commercial Pt catalyst. Even after 10 000 cycles of harsh accelerated durability testing, the PtNi/C hollow electrocatalyst showed high performance and durability. We concluded that the Pt-rich layers on the PtNi hollow nanoparticles improved the catalytic activity and durability considerably.

Bimetallic PtAu electrocatalysts for the oxygen reduction reaction: challenges and opportunities

Highly active, durable oxygen reduction reaction (ORR) electrocatalysts have an essential role in promoting the continuous operation of advanced energy technologies such as fuel cells and metal-air batteries. Considering the scarce reserve of Pt and its unsatisfactory overall performance, there is an urgent demand for the development of new generation ORR electrocatalysts that are substantially better than the state-of-the-art supported Pt-based nanocatalysts, such as Pt/C. Among various nanostructures, bimetallic PtAu represents one unique alloy system where highly contradictory performance has been reported. While it is generally accepted that Au may contribute to stabilizing Pt, its role in modulating the intrinsic activity of Pt remains unclear. This perspective will discuss critical structural issues that affect the intrinsic ORR activities of bimetallic PtAu, with an eye on elucidating the origin of seemingly inconsistent experimental results from the literature. As a relatively new class of electrodes, we will also highlight the performance of dealloyed nanoporous gold (NPG) based electrocatalysts, which allow a unique combination of structural properties highly desired for this important reaction. Finally, we will put forward the challenges and opportunities for the incorporation of these advanced electrocatalysts into membrane electrode assemblies (MEA) for actual fuel cells.

Catalytically Active Au Layers Grown on Pd Nanoparticles for Direct Synthesis of H2O2: Lattice Strain and Charge-Transfer Perspective Analyses

Despite its effectiveness in improving the properties of materials, strain engineering has not yet been employed to endow catalytic characteristics to apparently nonactive metals. This limitation can be overcome by controlling simultaneously lattice strains and charge transfer originated from the epitaxially prepared bimetallic core-shell structure. Here, we report the experimental results of the direct H₂O₂ synthesis enabled by a strained Au layer grown on Pd nanoparticles. This system can benefit the individual catalytic properties of each involved material, and the heterostructured catalyst displays an improved productivity for the direct synthesis of H₂O₂ by ∼100% relative to existing Pd catalysts. This is explained here by exploring the individual effects of lattice strain and charge transfer on the alteration of the electronic structure of ultrathin Au layers grown on Pd nanoparticles. The approach used in this study can be viewed as a means of designing catalysts with multiple catalytic functions.

Electrocatalytic Activities towards the Electrochemical Oxidation of Formic Acid and Oxygen Reduction Reactions over Bimetallic, Trimetallic and Core–Shell-Structured Pd-Based Materials

The structural design of nanosized electrocatalysts is extremely important for cathodic oxygen reduction reactions (ORR) and anodic oxidation reactions in small organic compounds in direct fuel cells. While Pt is still the most commonly used electrode material for ORR, the Pd electrocatalyst is a promising alternative to Pt, because it exhibits much higher electrocatalytic activity towards formic acid electrooxidation, and the electrocatalytic activity of ORR on the Pd electrode is the higher than that of all other precious metals, except for Pt. In addition, the mass activity of Pt in a core–shell structure for ORR can be improved significantly by using Pd and Pd-based materials as core materials. Herein, we review various nanoscale Pd-based bimetallic, trimetallic and core–shell electrocatalysts for formic acid oxidation and ORR of polymer electrolyte fuel cells (PEFCs). This review paper is separated into two major topics: the electrocatalytic activity towards formic acid oxidation over various Pd-based electrocatalysts, and the activity of ORR on Pd-based materials and Pd core–Pt shell structures.

Pt Monolayers on Electrodeposited Nanoparticles of Different Compositions for Ammonia Electro-Oxidation

Pt monolayers (PtML) supported on nanoparticles with different compositions (i.e., Ru, Rh, Pd, Ir, and Au) were synthesized by the surface–limited redox replacement of underpotentially deposited Cu monolayers on nanoparticle supports. Nanoparticle supports with different compositions were directly deposited on the conducting substrate by a clean and one-step electrodeposition method with controlled deposition potential and time. The whole synthesis process of the electrode was free of surfactants, binders, capping agents and reductants, and without an additional coating process of electrocatalysts. The results show that the specific activity (SA) of PtML electrocatalysts depended strongly on the composition of the nanoparticle support. For example, the PtML supported on the Au nanoparticle exhibited 8.3 times higher SA than that supported on the Ru and Pd nanoparticles. The change in the SA of the PtML supported on different nanoparticles was related to the substrate–induced strain in the PtML resulting from the lattice mismatch between the PtML and the nanoparticle support. As the strain in the PtML changed from the tensile strain to the compressive strain, the SA of the PtML electrocatalysts decreased remarkably.

Annealing Behaviour of Pt and PtNi Nanowires for Proton Exchange Membrane Fuel Cells

PtNi alloy and hybrid structures have shown impressive catalytic activities toward the cathodic oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). However, such promise does not often translate into improved electrode performances in PEMFC devices. In this contribution, a Ni impregnation and subsequent annealing method, translatable to vertically aligned nanowire gas diffusion electrodes (GDEs), is shown in thin-film rotating disk electrode measurements (TFRDE) to enhance the ORR mass activity of Pt nanowires (NWs) supported on carbon (Pt NWs/C) by around 1.78 times. Physical characterisation results indicate that this improvement can be attributed to a combination of Ni alloying of the nanowires with retention of the morphology, while demonstrating that Ni can also help improve the thermal stability of Pt NWs. These catalysts are then tested in single PEMFCs. Lower power performances are achieved for PtNi NWs/C than Pt NWs/C. A further investigation confirms the different surface behaviour between Pt NWs and PtNi NWs when in contact with electrolyte ionomer in the electrodes in PEMFC operation. Indications are that this interaction exacerbates reactant mass transport limitations not seen with TFRDE measurements.

Regulating Surface Facets of Metallic Aerogel Electrocatalysts by Size-Dependent Localized Ostwald Ripening

It is well known that the activity and stability of electrocatalysts are largely dependent on their surface facets. In this work, we have successfully regulated surface facets of three-dimensional (3D) metallic Au ^{m- n} aerogels by salt-induced assembly of citrate-stabilized gold nanoparticles (Au NPs) of two different sizes and further size-dependent localized Ostwald ripening at controlled particle number ratios, where m and n represent the size of Au NPs. In addition, 3D Au ^{m- n}-Pd aerogels were further synthesized on the basis of Au ^{m- n} aerogels and also bear controlled surface facets because of the formation of ultrathin Pd layers on Au ^{m- n} aerogels. Taking the electrooxidation of small organic molecules (such as methanol and ethanol) by the resulting Au ^{m- n} and Au ^{m- n}-Pd aerogels as examples, it is found that surface facets of metallic aerogels with excellent performance can be regulated to realize preferential surface facets for methanol oxidation and ethanol oxidation, respectively. Moreover, they also indeed simultaneously bear high activity and excellent stability. Furthermore, their activities and stability are also highly dependent on the area ratio of active facets and inactive facets on their surfaces, respectively, and these ratios are varied via the mismatch of sizes of adjacent NPs. Thus, this work not only demonstrates the realization of the regulation of the surface facets of metallic aerogels by size-dependent localized Ostwald ripening but also will open up a new way to improve electrocatalytic performance of 3D metallic aerogels by surface regulation.

Ultrathin Metallic Nanowire-Based Architectures as High-Performing Electrocatalysts

Fuel cells (FCs) convert chemical energy into electricity through electrochemical reactions. They maintain desirable functional advantages that render them as attractive candidates for renewable energy alternatives. However, the high cost and general scarcity of conventional FC catalysts largely limit the ubiquitous application of this device configuration. For example, under current consumption requirements, there is an insufficient global reserve of Pt to provide for the needs of an effective FC for every car produced. Therefore, it is absolutely necessary in the future to replace Pt either completely or in part with far more plentiful, abundant, cheaper, and potentially less toxic first row transition metals, because the high cost-to-benefit ratio of conventional catalysts is and will continue to be a major limiting factor preventing mass commercialization. We and other groups have explored a number of nanowire-based catalytic architectures, which are either Pt-free or with reduced Pt content, as an energy efficient solution with improved performance metrics versus conventional, currently commercially available Pt nanoparticles that are already well established in the community. Specifically, in this Perspective, we highlight strategies aimed at the rational modification of not only the physical structure but also the chemical composition as a means of developing superior electrocatalysts for a number of small-molecule-based anodic oxidation and cathodic reduction reactions, which underlie the overall FC behavior. In particular, we focus on efforts to precisely, synergistically, and simultaneously tune not only the size, morphology, architectural motif, surface chemistry, and chemical composition of the as-generated catalysts but also the nature of the underlying support so as to controllably improve performance metrics of the hydrogen oxidation reaction, the methanol oxidation reaction, the ethanol oxidation reaction, and the formic acid oxidation reaction, in addition to the oxygen reduction reaction.

Ultrahigh Vacuum Synthesis of Strain-Controlled Model Pt(111)-Shell Layers: Surface Strain and Oxygen Reduction Reaction Activity

In this study, we perform ultrahigh vacuum (UHV) and arc-plasma synthesis of strain-controlled Pt(111) model shells on Pt-Co(111) layers with various atomic ratios of Pt/Co and an oxygen reduction reaction (ORR) activity enhancement trend against the surface strain induced by lattice mismatch between the Pt shell and Pt-Co alloy-core interface structures was observed. The results showed that the Pt(111)-shell with 2.0% compressive surface strain vs intrinsic Pt(111) lattice gave rise to a maximum activity enhancement, ca. 13-fold higher activity than that of clean Pt(111). This study clearly demonstrates that the UHV-synthesized, strain-controlled Pt shells furnish useful surface templates for electrocatalysis.

PtPb/PtNi Intermetallic Core/Atomic Layer Shell Octahedra for Efficient Oxygen Reduction Electrocatalysis

Although explosive studies on pursuing high-performance Pt-based nanomaterials for fuel cell reactions have been carried out, the combined controls of surface composition, exposed facet, and interior structure of the catalyst remains a formidable challenge. We demonstrate herein a facile chemical approach to realize a new class of intermetallic Pt-Pb-Ni octahedra for the first time. Those nanostructures with unique intermetallic core, active surface composition, and the exposed facet enhance oxygen reduction electrocatalysis with the optimized PtPb_1.12Ni_0.14 octahedra exhibiting superior specific and mass activities (5.16 mA/cm² and 1.92 A/mg_Pt) for oxygen reduction reaction (ORR) that are ∼20 and ∼11 times higher than the commercial Pt/C, respectively. Moreover, the PtPb_1.12Ni_0.14 octahedra can endure at least 15 000 cycles with negligible activity decay, showing a new class of Pt-based electrocatalysts with enhanced performance for fuel cells and beyond.

Highly Active and Stable Pt-Pd Alloy Catalysts Synthesized by Room-Temperature Electron Reduction for Oxygen Reduction Reaction

Carbon-supported platinum (Pt) and palladium (Pd) alloy catalyst has become a promising alternative electrocatalyst for oxygen reduction reaction (ORR) in proton exchange membrane fuel cells. In this work, the synthesis of highly active and stable carbon-supported Pt-Pd alloy catalysts is reported with a room-temperature electron reduction method. The alloy nanoparticles thus prepared show a particle size around 2.6 nm and a core-shell structure with Pt as the shell. With this structure, the breaking of O-O bands and desorption of OH are both promoted in electrocatalysis of ORR. In comparison with the commercial Pt/C catalyst prepared by conventional method, the mass activity of the Pt-Pd/C catalyst for ORR is shown to increase by a factor of ≈4. After 10 000-cycle durability test, the Pt-Pd/C catalyst is shown to retain 96.5% of the mass activity, which is much more stable than that of the commercial Pt/C catalyst.

Atomic-Level-Designed Catalytically Active Palladium Atoms on Ultrathin Gold Nanowires

A Ag monolayer facilitates the deposition of isolated Pd atoms rather than continuous ones on ultrathin Au nanowires. During the hydrogenation of nitrophenol and the electrooxidation of ethanol, these two groups of Pd atoms show distinctive but geometry-dependent catalytic activity. This new atomic geometry maneuvering strategy is ready for the atomically precise design of nanocatalysts.

Pt skin on Pd-Co-Zn/C ternary nanoparticles with enhanced Pt efficiency toward ORR

Exploring highly active, stable and relatively low-cost nanomaterials for the oxygen reduction reaction (ORR) is of vital importance for the commercialization of proton exchange membrane fuel cells (PEMFCs). Herein, a highly active, durable, carbon supported, and monolayer Pt coated Pd-Co-Zn nanoparticle is synthesized via a simple impregnation-reduction method, followed by spontaneous displacement of Pt. By tuning the atomic ratios, we obtain the composition-activity volcano curve for the Pd-Co-Zn nanoparticles and determined that Pd : Co : Zn = 8 : 1 : 1 is the optimal composition. Compared with pure Pd/C, the Pd8CoZn/C nanoparticles show a substantial enhancement in both the catalytic activity and the durability toward the ORR. Moreover, the durability and activity are further enhanced by forming a Pt skin on Pd8CoZn/C nanocatalysts. Interestingly, after 10 000 potential cycles in N2-saturated 0.1 M HClO4 solution, Pd8CoZn@Pt/C shows improved mass activity (2.62 A mg(-1)Pt) and specific activity (4.76 A m(-2)total), which are about 1.4 and 4.4 times higher than the initial values, and 37.4 and 5.5 times higher than those of Pt/C catalysts, respectively. After accelerated stability testing in O2-saturated 0.1 M HClO4 solution for 30 000 potential cycles, the half-wave potential negatively shifts about 6 mV. The results show that the Pt skin plays an important role in enhancing the activity as well as preventing degradation.

Tuning Surface Properties of Low Dimensional Materials via Strain Engineering

The promising and versatile applications of low dimensional materials are largely due to their surface properties, which along with their underlying electronic structures have been well studied. However, these materials may not be directly useful for applications requiring properties other than their natal ones. In recent years, strain has been shown to be an additionally useful handle to tune the physical and chemical properties of materials by changing their geometric and electronic structures. The strategies for producing strain are summarized. Then, the electronic structure of quasi-two dimensional layered non-metallic materials (e.g., graphene, MX2, BP, Ge nanosheets) under strain are discussed. Later, the strain effects on catalytic properties of metal-catalyst loaded with strain are focused on. Both experimental and computational perspectives for dealing with strained systems are covered. Finally, an outlook on engineering surface properties utilizing strain is provided.