Atomically dispersed Au-(OH)x species bound on titania catalyze the low-temperature water-gas shift reaction

Facilely Fabricated Single-Site Ptδ+-O(OH)x- Species Associated with Alkali on Zirconia Exhibiting Superior Catalytic Oxidation Reactivity

Fabrication of robust isolated atom catalysts has been a research hotspot in the environment catalysis field for the removal of various contaminants, but there are still challenges in improving the reactivity and stability. Herein, through facile doping alkali metals in Pt catalyst on zirconia (Pt-Na/ZrO2), the atomically dispersed Ptδ+-O(OH)x- associated with alkali metal via oxygen bridge was successfully fabricated. This novel catalyst presented remarkably higher CO and hydrocarbon (HCs: C3H8, C7H8, C3H6, and CH4) oxidation activity than its counterpart (Pt/ZrO2). Systematically direct and solid evidence from experiments and density functional theory calculations demonstrated that the fabricated electron-rich Ptδ+-O(OH)x- related to Na species rather than the original Ptδ+-O(OH)x-, serving as the catalytically active species, can readily react with CO adsorbed on Ptδ+ to produce CO2 with significantly decreasing energy barrier in the rate-determining step from 1.97 to 0.93 eV. Additionally, owing to the strongly adsorbed and activated water by Na species, those fabricated single-site Ptδ+-O(OH)x- linked by Na species could be easily regenerated during the oxidation reaction, thus considerably boosting its oxidation reactivity and durability. Such facile construction of the alkali ion-linked active hydroxyl group was also realized by Li and K modification which could guide to the design of efficient catalysts for the removal of CO and HCs from industrial exhaust.

Natural biomass derived single-atom catalysts for energy and environmental applications

Single atom catalysts (SACs) excel in various chemical processes, including electrocatalysis and industrial chemistry, due to their efficiency. In contrast to chemically synthesized precursors, biomass offers a greener and more cost-effective approach for SACs fabrication. To date, over forty types of SACs have been synthesized using natural sources like starch, cellulose, lignin, hemicellulose, proteins, and chitin. These catalysts incorporate metals such as Fe, Co, Ni, Cu, Zn, Mn, and Pt. This review concentrates on the preparation of SACs from biomass, exploring innovative techniques and their extensive applications in energy conversion and environmental conservation, including but not limited to reactions involving oxygen reduction, oxygen evolution, and hydrogen evolution. It also discusses current challenges and prospective advancements in this domain. This paper updates and expands on the knowledge of SACs derived from biomass, aiming to foster the development of more effective, low-cost catalyst materials from natural sources.

Structured Catalysts and Catalytic Processes: Transport and Reaction Perspectives

The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.

Alkaline-earth ion stabilized sub-nano-platinum tin clusters for propane dehydrogenation

The strong promotion effects of alkali/alkaline earth metals are frequently reported for heterogeneous catalytic processes such as propane dehydrogenation (PDH), but their functioning principles remain elusive. This paper describes the effect of the addition of calcium (Ca) on reducing the deactivation rate of platinum-tin (Pt-Sn) catalyzed PDH from 0.04 h-1 to 0.0098 h-1 at 873 K under a WHSV of 16.5 h-1 of propane. The Pt-Sn-Ca catalyst shows a high propylene selectivity of >96% with a propylene production rate of 41 molC3H6 (gPt h)-1 and ∼1% activity loss after regeneration. The combination of characterization and DFT simulations reveals that Ca acts as a structural promoter favoring the transition of Snn+ in the parent catalyst to Sn0 during reduction, and the latter is an electron donor that increases the electron density of Pt. This greatly suppresses coke formation from deep dehydrogenation. Moreover, it was found that Ca promotes the formation of a highly reactive and sintering-resistant sub-nano Pt-Sn alloy with a diameter of approximately 0.8 nm. These lead to high activity and selectivity for the Pt-Sn-Ca catalyst for PDH.

Emerging Xene-Based Single-Atom Catalysts: Theory, Synthesis, and Catalytic Applications

In recent years, the emergence of novel 2D monoelemental materials (Xenes), e.g., graphdiyne, borophene, phosphorene, antimonene, bismuthene, and stanene, has exhibited unprecedented potentials for their versatile applications as well as addressing new discoveries in fundamental science. Owing to their unique physicochemical, optical, and electronic properties, emerging Xenes have been regarded as promising candidates in the community of single-atom catalysts (SACs) as single-atom active sites or support matrixes for significant improvement in intrinsic activity and selectivity. In order to comprehensively understand the relationships between the structure and property of Xene-based SACs, this review represents a comprehensive summary from theoretical predictions to experimental investigations. Firstly, theoretical calculations regarding both the anchoring of Xene-based single-atom active sites on versatile support matrixes and doping/substituting heteroatoms at Xene-based support matrixes are briefly summarized. Secondly, controlled synthesis and precise characterization are presented for Xene-based SACs. Finally, current challenges and future opportunities for the development of Xene-based SACs are highlighted.

Dynamic behaviour of platinum and copper dopants in gold nanoclusters supported on ceria catalysts

Understanding the behaviour of active catalyst sites at the atomic level is crucial for optimizing catalytic performance. Here, the evolution of Pt and Cu dopants in Au25 clusters on CeO2 supports is investigated in the water-gas shift (WGS) reaction, using operando XAFS and DRIFTS. Different behaviour is observed for the Cu and Pt dopants during the pretreatment and reaction. The Cu migrates and builds clusters on the support, whereas the Pt creates single-atom active sites on the surface of the cluster, leading to better performance. Doping with both metals induces strong interactions and pretreatment and reaction conditions lead to the growth of the Au clusters, thereby affecting their catalytic behaviour. This highlights importance of understanding the behaviour of atoms at different stages of catalyst evolution. These insights into the atomic dynamics at the different stages are crucial for the precise optimisation of catalysts, which ultimately enables improved catalytic performance.

Photocatalytic Free Radical-Controlled Synthesis of High-Performance Single-Atom Catalysts

Single-atom catalysts (SACs) have emerged as crucial players in catalysis research, prompting extensive investigation and application. The precise control of metal atom nucleation and growth has garnered significant attention. In this study, we present a straightforward approach for preparing SACs utilizing a photocatalytic radical control strategy. Notably, we demonstrate for the first time that radicals generated during the photochemical process effectively hinder the aggregation of individual atoms. By leveraging the cooperative anchoring of nitrogen atoms and crystal lattice oxygen on the support, we successfully stabilize the single atom. Our Pd1 /TiO2 catalysts exhibit remarkable catalytic activity and stability in the Suzuki-Miyaura cross-coupling reaction, which was 43 times higher than Pd/C. Furthermore, we successfully depose Pd atoms onto various substrates, including TiO2 , CeO2 , and WO3 . The photocatalytic radical control strategy can be extended to other single-atom catalysts, such as Ir, Pt, Rh, and Ru, underscoring its broad applicability.

Performance Regulation of Single-Atom Catalyst by Modulating the Microenvironment of Metal Sites

Metal-based catalysts, encompassing both homogeneous and heterogeneous types, play a vital role in the modern chemical industry. Heterogeneous metal-based catalysts usually possess more varied catalytically active centers than homogeneous catalysts, making it challenging to regulate their catalytic performance. In contrast, homogeneous catalysts have defined active-site structures, and their performance can be easily adjusted by modifying the ligand. These characteristics lead to remarkable conceptual and technical differences between homogeneous and heterogeneous catalysts. As a recently emerging class of catalytic material, single-atom catalysts (SACs) have become one of the most active new frontiers in the catalysis field and show great potential to bridge homogeneous and heterogeneous catalytic processes. This review documents a brief introduction to SACs and their role in a range of reactions involving single-atom catalysis. To fully understand process-structure-property relationships of single-atom catalysis in chemical reactions, active sites or coordination structure and performance regulation strategies (e.g., tuning chemical and physical environment of single atoms) of SACs are comprehensively summarized. Furthermore, we discuss the application limitations, development trends and future challenges of single-atom catalysis and present a perspective on further constructing a highly efficient (e.g., activity, selectivity and stability), single-atom catalytic system for a broader scope of reactions.

Theoretical insight into the promotion effect of potassium additive on the water-gas shift reaction over low-coordinated Au catalysts

CONTEXT

How to elucidate the effect of alkali metal promoters on gold-catalyzed water-gas shift reaction intrinsically remains a challenging, because that the complex synergy effects such as strong metal-support interactions, interfacial effects, and charge transfer of supported metal catalysts makes people difficulty in the understanding the alkali promotion phenomenon in nature. Herein, we report a systematically study of whole water-gas shift reaction mechanism on pure and the K-modified defected-Au(211) (i.e., by removing one surface Au atom from perfect Au(211) and make one model with the Au-Au coordination number is six) by using the microkinetic modeling based on first principles. Our results indicate that the presence of K can increase the adsorption ability of oxygen-containing species via the attractive coulomb interaction, has no significant effect on the adsorption of H species, but inhibits the adsorption of CO due to the steric effect. K promoter stabilizes the water adsorption by ~0.3 eV, which results in one order increasing of whole reaction rate. Interestingly, the strong promotion effect of the K can be assigned to the significant direct space interaction between K and the adsorbate H2O* through the inducted electric field, which can be further confirmed by the posed negative electric field on the unpromoted D-Au(211). Microkinetic modeling results revealed that the carboxyl mechanism is the most likely to occur, redox mechanism is the next one, and the formate mechanism is the least likely to occur. For different kinds of alkali metal additives, the adsorption strength of water molecules gradually weakens from Li to Cs, but Na shows the best promoter behavior at the low temperature. By considering the effect of K contents on the reactivity of water-gas shift reaction, we found that the K with the medium coverage (~0.2~0.3 ML) has the strongest promoting effect. It is expected that the conclusion of this work can be extended to other WGSR catalytic systems like Cu(or Pt).

METHODS

All calculations were performed by using the plane-wave based periodic method implemented in Vienna ab initio simulation package (VASP, version 5.4.4), where the ionic cores are described by the projector augmented wave (PAW) method. The exchange and correlation energies were computed using the Perdew, Burke and Ernzerhof functional with the vdw correction (PBE-D3). The transition states (TSs) were searched using the climbing image nudged elastic band (CI-NEB) method. Some electronic structure properties like work function was predicated by the DS-PAW software. Microkinetic simulation was carried out using MKMCXX software.

Mechanistic Understanding of the Use of Single-Atom and Nanocluster Catalysts for Syngas Production via Partial Oxidation of Methane

Single-atom and nanocluster catalysts presenting potent catalytic activity and excellent stability are used in high-temperature applications such as in structural composites, electrical devices, and catalytic chemical reactions. Recently, more attention has been drawn to application of these materials in clean fuel processing based on oxidation in terms of recovery and purification. The most popular media for catalytic oxidation reactions include gas phases, pure organic liquid phases, and aqueous solutions. It has been proven from the literature that catalysts are frequently selected as the finest in regulating organic wastewater, solar energy utilization, and environmental treatment applications in most catalytic oxidation of methane vis-à-vis photons and in environmental treatment applications. Single-atom and nanocluster catalysts have been engineered and applied in catalytic oxidations considering metal-support interactions and mechanisms facilitating catalytic deactivation. In this review, the present improvements on engineering single-atom and nano-catalysts are discussed. In detail, we summarize structure modification strategies, catalytic mechanisms, methods of synthesis, and application of single-atom and nano-catalysts for partial oxidation of methane (POM). We also present the catalytic performance of various atoms in the POM reaction. Full knowledge of the use of remarkable POM vis-à-vis the excellent structure is revealed. Based on the review conducted on single-atom and nanoclustered catalysts, we conclude their viability for POM reactions; however, the catalyst design must be carefully considered not only for isolating the individual influences from the active metal and support but also for incorporating the interactions of these components.

Cascade Anchoring Strategy for Fabricating High-Loading Pt Single Atoms as Bifunctional Catalysts for Electrocatalytic Hydrogen Evolution and Oxygen Reduction Reactions

Carbon supports containing single-atomically dispersed metal-N_x (denoted as M_SAC-N_xC_y, x, y: coordination number) have attracted increasing attention due to their superb performance in heterogeneous catalysis. However, large-scale controllable preparation of single-atom catalysts (SACs) with high concentration of supported metal-N_x is still a big challenge because of the metal atom agglomeration during synthesis at high density and temperatures. Herein, we report a stepwise anchoring strategy from a 1,10-o-phenanthroline Pt chelate to an N_x-doped carbon (N_xC_y) with isolated Pt single-atom catalysts (Pt_SAC-N_xC_y) containing Pt loadings up to 5.31 wt % measured via energy-dispersive X-ray spectroscopy (EDS). The results show that 1,10-o-phenanthroline Pt chelate predominantly contributes to the formation of chelate single metal sites that bind tightly to platinum ions to prevent metal atoms from aggregating, resulting in high metal loading. The high-loading Pt_SAC-N_xC_y exhibits a low hydrogen evolution (HER) overpotential of 24 mV at 0.010 A cm^-2 current density with a relatively small Tafel gradient of 60.25 mV dec^-1 and excellent stable performance. In addition, the Pt_SAC-N_xC_y catalyst shows excellent oxygen reduction reaction (ORR) catalytic activity with good stability, represented by the fast ORR kinetics under high-potential conditions. Theoretical calculations show that Pt_SAC-NC₃ (x = 1, y = 3) offers a lower H₂O activation energy barrier than Pt nanoparticles. The adsorption free energy of a H atom on a Pt single-atom site is lower than that on a Pt cluster, which is easier for H₂ desorption. This study provides a potentially powerful cascade anchoring strategy in the design of other stable M_SAC-N_xC_y catalysts with high-density metal-N_x sites for the HER and ORR.

Ambient Electrosynthesis toward Single-Atom Sites for Electrocatalytic Green Hydrogen Cycling

With the ultimate atomic utilization, well-defined configuration of active sites and unique electronic properties, catalysts with single-atom sites (SASs) exhibit appealing performance for electrocatalytic green hydrogen generation from water splitting and further utilization via hydrogen-oxygen fuel cells, such that a vast majority of synthetic strategies toward SAS-based catalysts (SASCs) are exploited. In particular, room-temperature electrosynthesis under atmospheric pressure offers a novel, safe, and effective route to access SASs. Herein, the recent progress in ambient electrosynthesis toward SASs for electrocatalytic sustainable hydrogen generation and utilization, and future opportunities are discussed. A systematic summary is started on three kinds of ambient electrochemically synthetic routes for SASs, including electrochemical etching (ECE), direct electrodeposition (DED), and electrochemical leaching-redeposition (ELR), associated with advanced characterization techniques. Next, their electrocatalytic applications for hydrogen energy conversion including hydrogen evolution reaction, oxygen evolution reaction, overall water splitting, and oxygen reduction reaction are reviewed. Finally, a brief conclusion and remarks on future challenges regarding further development of ambient electrosynthesis of high-performance and cost-effective SASCs for many other electrocatalytic applications are presented.

Advanced Nanostructured Materials for Electrocatalysis in Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are considered as among the most promising electrochemical energy storage devices due to their high theoretical energy density and low cost. However, the inherently complex electrochemical mechanism in Li-S batteries leads to problems such as slow internal reaction kinetics and a severe shuttle effect, which seriously affect the practical application of batteries. Therefore, accelerating the internal electrochemical reactions of Li-S batteries is the key to realize their large-scale applications. This article reviews significant efforts to address the above problems, mainly the catalysis of electrochemical reactions by specific nanostructured materials. Through the rational design of homogeneous and heterogeneous catalysts (including but not limited to strategies such as single atoms, heterostructures, metal compounds, and small-molecule solvents), the chemical reactivity of Li-S batteries has been effectively improved. Here, the application of nanomaterials in the field of electrocatalysis for Li-S batteries is introduced in detail, and the advancement of nanostructures in Li-S batteries is emphasized.

Design of Single-Atom Catalysts and Tracking Their Fate Using Operando and Advanced X-ray Spectroscopic Tools

The potential of operando X-ray techniques for following the structure, fate, and active site of single-atom catalysts (SACs) is highlighted with emphasis on a synergetic approach of both topics. X-ray absorption spectroscopy (XAS) and related X-ray techniques have become fascinating tools to characterize solids and they can be applied to almost all the transition metals deriving information about the symmetry, oxidation state, local coordination, and many more structural and electronic properties. SACs, a newly coined concept, recently gained much attention in the field of heterogeneous catalysis. In this way, one can achieve a minimum use of the metal, theoretically highest efficiency, and the design of only one active site-so-called single site catalysts. While single sites are not easy to characterize especially under operating conditions, XAS as local probe together with complementary methods (infrared spectroscopy, electron microscopy) is ideal in this research area to prove the structure of these sites and the dynamic changes during reaction. In this review, starting from their fundamentals, various techniques related to conventional XAS and X-ray photon in/out techniques applied to single sites are discussed with detailed mechanistic and in situ/operando studies. We systematically summarize the design strategies of SACs and outline their exploration with XAS supported by density functional theory (DFT) calculations and recent machine learning tools.

Single-atom site catalysts for environmental remediation: Recent advances

Single-atom site catalysts (SACs) can maximize the utilization of active metal species and provide an attractive way to regulate the activity and selectivity of catalytic reactions. The adjustable coordination configuration and atomic structure of SACs enable them to be an ideal candidate for revealing reaction mechanisms in various catalytic processes. The minimum use of metals and relatively tight anchoring of the metal atoms significantly reduce leaching and environmental risks. Additionally, the unique physicochemical properties of single atom sites endow SACs with superior activity in various catalytic processes for environmental remediation (ER). Generally, SACs are burgeoning and promising materials in the application of ER. However, a systematic and critical review on the mechanism and broad application of SACs-based ER is lacking. Herein, we review emerging studies applying SACs for different ERs, such as eliminating organic pollutants in water, removing volatile organic compounds, purifying automobile exhaust, and others (hydrodefluorination and disinfection). We have summarized the synthesis, characterization, reaction mechanism and structural-function relationship of SACs in ER. In addition, the perspectives and challenges of SACs for ER are also analyzed. We expect that this review can provide constructive inspiration for discoveries and applications of SACs in environmental catalysis in the future.

Single-Atom Catalysts: Preparation and Applications in Environmental Catalysis

Due to the expensive price and the low reserve of noble metals in nature, much attention has been paid to single-atom catalysts (SACs)—especially single-atom noble metal catalysts—owing to their maximum atomic utilization and dispersion. The emergence of SACs greatly decreases the amount of precious metals, improves the catalytic activity, and makes the catalytic process progressively economic and sustainable. However, the most remarkable challenge is the active sites and their stability against migration and aggregation under practical conditions. This review article summarizes the preparation strategies of SACs and their catalytic applications for the oxidation of methane, carbon monoxide, and volatile organic compounds (VOCs) and the reduction of nitrogen oxides. Furthermore, the perspectives and challenges of SACs in future research and practical applications are proposed. It is envisioned that the results summarized in this review will stimulate the interest of more researchers in developing SACs that are effective in catalyzing the reactions related to the environmental pollution control.

Isolating Single and Few Atoms for Enhanced Catalysis

Atomically dispersed metal catalysts have triggered great interest in the field of catalysis owing to their unique features. Isolated single or few metal atoms can be anchored on substrates via chemical bonding or space confinement to maximize atom utilization efficiency. The key challenge lies in precisely regulating the geometric and electronic structure of the active metal centers, thus significantly influencing the catalytic properties. Although several reviews have been published on the preparation, characterization, and application of single-atom catalysts (SACs), the comprehensive understanding of SACs, dual-atom catalysts (DACs), and atomic clusters has never been systematically summarized. Here, recent advances in the engineering of local environments of state-of-the-art SACs, DACs, and atomic clusters for enhanced catalytic performance are highlighted. Firstly, various synthesis approaches for SACs, DACs, and atomic clusters are presented. Then, special attention is focused on the elucidation of local environments in terms of electronic state and coordination structure. Furthermore, a comprehensive summary of isolated single and few atoms for the applications of thermocatalysis, electrocatalysis, and photocatalysis is provided. Finally, the potential challenges and future opportunities in this emerging field are presented. This review will pave the way to regulate the microenvironment of the active site for boosting catalytic processes.

Enabling High Loading in Single-Atom Catalysts on Bare Substrate with Chemical Scissors by Saturating the Anchoring Sites

Atomically dispersed metal catalysts often exhibit high catalytic performances, but the metal loading density must be kept low to avoid the formation of metal nanoparticles, making it difficult to improve the overall activity. Diverse strategies based on creating more anchoring sites (ASs) have been adopted to elevate the loading density. One problem of such traditional methods is that the single atoms always gather together before the saturation of all ASs. Here, a chemical scissors strategy is developed by selectively removing unwanted metallic materials after excessive loading. Different from traditional ways, the chemical scissors strategy places more emphasis on the accurate matching between the strength of etching agent and the bond energies of metal-metal/metal-substrate, thus enabling a higher loading up to 2.02 wt% even on bare substrate without any pre-treatment (the bare substrate without any pre-treatment generally only has a few ASs for single atom loading). It can be inferred that by combining with other traditional methods which can create more ASs, the loading could be further increased by saturating ASs. When used for CH₃ OH generation via photocatalytic CO₂ reduction, the as-made single-atom catalyst exhibits impressive catalytic activity of 597.8 ± 144.6 µmol h^-1 g^-1 and selectivity of 81.3 ± 3.8%.

Iron Single Atoms Anchored on Carbon Matrix/g-C3N4 Hybrid Supports by Single-Atom Migration-Trapping Based on MOF Pyrolysis

Numerous efforts have been devoted to realizing the high loading and full utilization of single-atom catalysts (SACs). As one of the representative methods, atom migration-trapping (AMT) is a top-down strategy that converts a certain volume of metal nanoparticles (NPs) or metal-based precursors into mobile metal species at high temperature, which can then be trapped by suitable supports. In this study, high-loading iron single atoms anchored onto carbon matrix/g-C₃N₄ hybrid supports were obtained through a single-atom migration-trapping method based on metal–organic framework (MOF) pyrolysis. It is confirmed, by high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM), X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), that the Fe(acac)₃ precursor is reduced to Fe single atoms (SAs), which are not only anchored onto the original N-doped carbon (NC), but also onto g-C₃N₄, with an Fe-N coordination bond. Further electrochemical results reveal that Fe-C₃N₄-0.075 possesses a better half-wave potential of 0.846 V and onset potential of 0.96 V compared to Fe-N-C, the product obtained after pyrolysis of Fe(acac)₃@ZIF-8. As opposed to SAs prepared by the pyrolysis process only, SAs prepared by AMT are commonly anchored onto the surface of the supports, which is a simple and effective way to make full use of the source metal and prepare SACs with higher exposing active sites.

A minireview on the synthesis of single atom catalysts

Single atom catalysis is a prosperous and rapidly growing research field, owing to the remarkable advantages of single atom catalysts (SACs), such as maximized atom utilization efficiency, tailorable catalytic activities as well as supremely high catalytic selectivity. Synthesis approaches play crucial roles in determining the properties and performance of SACs. Over the past few years, versatile methods have been adopted to synthesize SACs. Herein, we give a thorough and up-to-date review on the progress of approaches for the synthesis of SACs, outline the general principles and list the advantages and disadvantages of each synthesis approach, with the aim to give the readers a clear picture and inspire more studies to exploit novel approaches to synthesize SACs effectively.

Electrocatalytic reduction of nitrate - a step towards a sustainable nitrogen cycle

Nitrate enrichment, which is mainly caused by the over-utilization of fertilisers and industrial sewage discharge, is a major global engineering challenge because of its negative influence on the environment and human health. To solve this serious problem, many technologies, such as the activated sludge method, reverse osmosis, ion exchange, adsorption, and electrodialysis, have been developed to reduce the nitrate levels in water bodies. However, the applications of these traditional techniques are limited by several drawbacks, such as a long sludge retention time, slow kinetics, and undesirable by-products. From an environmental perspective, the most promising nitrate reduction technology is enabled to convert nitrate into benign N₂, and features low cost, high efficiency, and environmental friendliness. Recently, electrocatalytic nitrate reduction has been proven by satisfactory research achievements to be one of the most promising methods among these technologies. This review provides a comprehensive account of nitrate reduction using electrocatalysis methods. The fundamentals of electrocatalytic nitrate reduction, including the reaction mechanisms, reactor design principles, product detection methods, and performance evaluation methods, have been systematically summarised. A detailed introduction to electrocatalytic nitrate reduction on transition metals, especially noble metals and alloys, Cu-based electrocatalysts, and Fe-based electrocatalysts is provided, as they are essential for the accurate reporting of experimental results. The current challenges and potential opportunities in this field, including the innovation of material design systems, value-added product yields, and challenges for products beyond N₂ and large-scale sewage treatment, are highlighted.

Emerging Single-Atom Catalysts/Nanozymes for Catalytic Biomedical Applications

Single-atom catalysts (SACs) are a type of atomically dispersed nanozymes with the highest atom utilization, which employ low-coordinated single atoms as the catalytically active sites. SACs not only inherit the merits of traditional nanozymes, but also hold high catalytic activity and superb catalytic selectivity, which ensure their tremendous application potential in environmental remediation, energy storage and conversion, chemical industry, nanomedicine, etc. Nevertheless, undesired aggregation effect of single atoms during preactivation and reaction processes is significantly enhanced owing to the high surface free energy of single atoms. In this case, appropriate substrates are requisite to prevent the aggregation event through the powerful interactions between the single atoms and the substrates, thereby stabilizing the high catalytic activity of the catalysts. In this review, the synthetic methods and characterization approaches of SACs are first described. Then the application cases of SACs in nanomedicine are summarized. Finally, the current challenges and future opportunities of the SACs in nanomedicine are outlined. It is hoped that this review may have implications for furthering the development of new SACs with improved biophysicochemical properties and broadened biomedical applications.

Highly Dispersed Platinum Chlorine Atoms Anchored on Gold Quantum Dots for a Highly Efficient Electrocatalyst

The development of efficient and durable electrocatalysts is the only way to achieve commercial fuel cells. A new, efficient method was utilized for epitaxial growth of gold quantum dots using atomically platinum chlorine species with porous graphdiyne as a support (PtCl₂Au(111)/GDY), for obtaining successful multicomponent quantum dots with a size of 2.37 nm. The electrocatalyst showed a high mass activity of 175.64 A mg_Pt^-1 for methanol oxidation reactions (MORs) and 165.35 A mg_Pt^-1 for ethanol oxidation reactions (EORs). The data for this experiment are 85.67 and 246.80 times higher than those of commercial Pt/C, respectively. The catalyst also showed highly robust stability for MORs with negligible specific activity decay after 110 h at 10 mA cm^-2. Both structure characterizations and theoretical calculations reveal that the excellent catalytic performance can be ascribed to the chlorine introduced to modify the d-band structure on the Pt surface and suppression of the CO poisoning pathway of the MOR. Our results indicate that an atomically dispersed metal species tailoring strategy opens up a new path for the efficient design of highly active and stable catalysts.

Facet-dependent activity of shape-controlled TiO2 supported Au nanoparticles for the water–gas shift reaction

Temperature-dependent interfacial catalysis of Au/TiO2 catalysts for the water–gas shift (WGS) reaction.

Noble-metal based single-atom catalysts for the water-gas shift reaction

Single-atom catalysts (SACs) have attracted great attention in heterogeneous catalysis. In this Feature Article, we summarize the recent advances of typical Au and Pt-group-metal (PGM) based SACs and their applications in the water-gas shift (WGS) reaction in the past two decades. First, oxide and carbide supported single atoms are categorized. Then, the active sites in the WGS reaction are identified and discussed, with SACs as the positive state or metallic state. After that, the reaction mechanisms of the WGS are presented, which are classified into two categories of redox mechanism and associative mechanism. Finally, the challenges and opportunities in this emerging field for the collection of hydrogen are proposed on the basis of current developments. It is believed that more and more exciting findings based on SACs are forthcoming.

Nano-Sized NiO Immobilized on Au/CNT for Benzyl Alcohol Oxidation: Influences of Hybrid Structure and Interface

Tiny gold nanoparticles were successfully anchored on carbon nanotubes (CNT) with NiO decoration by a two-step synthesis. Characterizations suggested that Ni species in an oxidative state preferred to be highly dispersed on CNT. During the synthesis, in situ reduction by NaBH₄ and thermal treatment in oxidation atmosphere were consequently carried out, causing the formation of Au-Ni-O_x interfaces and bimetal hybrid structure depending on the Ni/Au atomic ratios. With an appropriate Ni/Au atomic ratio of 8:1, Ni atoms migrated into the sub-layers of Au particles and induced the lattice contraction of Au particles, whilst a higher Ni/Au atomic ratio led to the accumulation of NiO fractions surrounding Au particles. Both contributed to the well-defined Au-Ni-O_x interface and accelerated reaction rates. Nickel species acted as structure promoters with essential Au-Ni-O_x hybrid structure as well as the active oxygen supplier, accounting for the enhanced activity for benzyl alcohol oxidation. However, the over-layer of unsaturated gold sites easily occured under a high Ni/Au ratio, resulting in a lower reaction rate. With an Au/Ni atomic ratio of 8:1, the specific rate of AuNi₈/CNT reached 185 μmol/g/s at only 50 °C in O₂ at ordinary pressure.

A novel Zn-Al spinel-alumina composite supported gold catalyst for efficient CO oxidation

A spinel-alumina inert oxide supported gold catalyst with high Au dispersion and excellent CO oxidation activity was developed by a deposition-precipitation method. The activation atmosphere could tune the reaction pathway by adjusting the amount of surface adsorbed water species, thus transforming the reaction intermediates from HCO₃^- or CO₃^2- to COOH.

Gold-silver nanoparticles modified electrochemical sensor array for simultaneous determination of chromium(III) and chromium(VI) in wastewater samples

The oxidation state of ions is a crucial aspect that often has been overlooked when determining the toxicity of chromium (Cr) species in environmental samples. In this study, a novel electrochemical sensor array based on gold-silver nanoparticles modified electrodes was developed for simultaneous determination of the two main chromium species (Cr(III) and (VI)). Specifically, the working electrodes of screen-printed carbon electrodes (SPCEs) were modified with silver-gold bimetallic nanoparticles through electrochemical deposition for detection of Cr(VI). The silver-gold bimetallic nanoparticles were further oxidized to form stable silver-gold bimetallic oxide nanoparticles for the detection of Cr(III). The results showed that the addition of silver with a theoretical value of 1% of gold could contribute to the formation and stabilization of oxides on the surface of gold nanoparticles. After characterization, the two kinds of electrodes were integrated as an electrochemical sensor array for selective and sensitive detection of Cr(VI) and Cr(III). The linear range and limit of detection (LOD, identified by three times of signal-to-noise ratio) were found to be 0.05-5 ppm and 0.1 ppb for Cr(VI), and 0.05-1 ppm and 0.1 ppb for Cr(III), respectively. Finally, the electrochemical sensor array was proven for successful detection of Cr(VI) and Cr(III) in tap water, artificial saliva and artificial sweat samples, and monitoring of Cr(VI) and Cr(III) in chromium-containing wastewater treatment process. Combined with a handheld dual-channel electrochemical device, the simultaneous determination of Cr(VI), Cr(III) and total chromium contents can be easily achieved for various samples.

Water Gas Shift Reaction Catalyzed by Rhodium-Manganese Oxide Cluster Anions

Fundamental understanding of the nature of active sites in real-life water gas shift (WGS) catalysts that can convert CO and H₂O into CO₂ and H₂ is crucial to engineer related catalysts performing under ambient conditions. Herein, we identified that the WGS reaction can be, in principle, catalyzed by rhodium-manganese oxide clusters Rh₂MnO_1,2^- in the gas phase at room temperature. This is the first example of the construction of such a potential catalysis in cluster science because it is challenging to discover clusters that can abstract the oxygen from H₂O and then supply the anchored oxygen to oxidize CO. The WGS reaction was characterized by mass spectrometry, photoelectron spectroscopy, and quantum-chemical calculations. The coordinated oxygen in Rh₂MnO_1,2^- is paramount for the generation of an electron-rich Mn⁺-Rh^- bond that is critical to capture and reduce H₂O and giving rise to a polarized Rh⁺-Rh^- bond that functions as the real redox center to drive the WGS reaction.

Zero-Valent Palladium Single-Atoms Catalysts Confined in Black Phosphorus for Efficient Semi-Hydrogenation

Single-atom catalysts (SACs) represent a new frontier in heterogeneous catalysis due to their remarkable catalytic properties and maximized atomic utilization. However, single atoms often bond to the support with polarized electron density and thus exhibit a high valence state, limiting their catalytic scopes in many chemical transformations. Here, it is demonstrated that 2D black phosphorus (BP) acts as giant phosphorus (P) ligand to confine a high density of single atoms (e.g., Pd₁ , Pt₁ ) via atomic layer deposition. Unlike other 2D materials, BP with relatively low electronegativity and buckled structure favors the strong confinement of robust zero-valent palladium SACs in the vacancy site. Metallic Pd₁ /BP SAC shows a highly selective semi-hydrogenation of phenylacetylene toward styrene, distinct from metallic Pd nanoparticles that facilitate the formation of fully hydrogenated products. Density functional theory calculations reveal that Pd atom forms covalent-like bonding with adjacent P atoms, wherein H atoms tend to adsorb, aiding the dissociative adsorption of H₂ . Zero-valent Pd in the confined space favors a larger energy gain for the synthesis of partially hydrogenated product over the fully hydrogenated one. This work provides a new route toward the synthesis of zero-valent SACs on BP for organic transformations.

Adsorbate-assisted migration of the metal atom in atomically dispersed catalysts: An ab initio molecular dynamics study

We present a phenomenological study of dynamical evolution of the active site in atomically dispersed catalysts in the presence of reaction intermediates associated with CO oxidation and low-temperature water-gas shift reaction. Using picosecond ab initio molecular dynamics, we probe the initiation of adsorbate-induced diffusion of atomically dispersed platinum on rutile TiO₂(110). NVT trajectories spanning 5 ps at 500 K reveal that the dynamical stability of the metal atom is governed by its local coordination to the support and adsorbate. Adsorbates that bind the strongest to Pt typically also lead to the fastest diffusion of the metal atom, and all adsorbates weaken Pt-support interactions, resulting in higher diffusion coefficients compared to bare Pt. We note, however, the absence of quantitative correlations between adsorption characteristics (Pt Bader charge, adsorbate binding energy) and ensemble-averaged quantities (diffusion coefficients). A recurring structural motif identified in several trajectories is a near-linear coordination between support oxygen, Pt, and specific adsorbates. These geometries, on account of enhanced metal support interactions, stabilize Pt and inhibit migration over picosecond timescales. We also identify hydrogen bonding events between the adsorbate and support for OH-containing groups. In the case of OH-bound Pt, for instance, we believe that short-lived H-bonds between OH and support promote Pt migration in the beginning of the NVT trajectory, while the subsequent formation of a near-linear geometry stabilizes the Pt atom despite the continued formation of short-lived hydrogen bonds. These observations are consistent with prior studies that report stabilization of isolated metal atoms in the presence of hydroxyl groups.

Graphene-supported single-atom catalysts and applications in electrocatalysis

Supported metal nanostructures are the most extensively studied heterogeneous catalysts, benefiting from easy separation, regeneration and affordable cost. The size of the supported metal species is one of the decisive factors in determining the activity of heterogeneous catalysts. Particularly, the unsaturated coordination environment of metal atoms preferably act as the active centers, minimizing these metal species can significantly boost the specific activity of every single metal atom. Single-atom catalysts/catalysis (SACs), containing isolated metals atomically dispersed on or coordinated with the surface of a support material, represent the ultimate utilization of supported metals and maximize metal usage efficiency. Graphene, a two-dimensional star material, exhibiting extraordinary physical and chemical properties, has been approved as an excellent platform for constructing SACs. When atomically dispersed metal atoms are strongly anchored on the graphene surface, featuring ultra-high surface area and excellent electronic properties, SACs offer a great potential to significantly innovate the conventional heterogeneous catalysis, especially in the field of electrocatalysis. In this review, a detailed discussion of graphene-supported SACs, including preparation approaches, characterization techniques and applications on typical electrocatalytic reactions is provided. The advantages and unique features of graphene-supported SACs as efficient electrocatalysts and the upcoming challenges for improving their performance and further practical applications are also highlighted.

Photosynthesis of a Photocatalyst: Single Atom Platinum Captured and Stabilized by an Iron(III) Engineered Defect

Single atom (SA), noble metal catalysts are of interest due to high projected catalytic activity while minimizing cost. Common issues facing many synthesis methodologies include complicated processes, low yields of SA product, and production of mixtures of SA and nanoparticles (NPs). Herein we report a simple, room-temperature synthesis of single Pt-atom decorated, anatase Fe-doped TiO₂ particles that leverages the Fe dopant as an engineered defect site to photodeposit and stabilize atomically dispersed Pt. Both particle morphology and Fe dopant location are based on thermodynamic principles (Gibbs-Wulff construction). CO-DRIFTS (diffuse reflectance infrared Fourier transform spectroscopy) reveals absence of bridge-bonded CO signal, confirming atomically dispersed Pt. XAS (X-ray absorption spectroscopy) of both Pt and Fe indicates Fe-O-Pt bonding that persists through catalytic cycling. Mass balance indicates that the Pt loading on single particles is 2.5 wt % Pt; the single Pt-atom decorated nanoparticle yield is 17%. Pt-containing particles show more than an order-of-magnitude increased photooxidation efficiency relative to particles containing only Fe. High single-atom-Pt yield, ease of synthesis, and high catalytic activity demonstrate the utility and promise of this method. The principles of this photodeposition synthesis allow for its generalizability toward other SA metals of catalytic interest.