Liquid Crystal Reorientation Induced by Aptamer Conformational Changes

Label-free liquid crystal-based optical detection of norfloxacin using an aptamer recognition probe in soil and lake water

Norfloxacin (NOX), a broad spectrum fluoroquinolone (FQ) antibiotic, is commonly detected in environmental residues, potentially contributing to biological drug resistance. In this paper, an aptamer recognition probe has been used to develop a label-free liquid crystal-based biosensor for simple and robust optical detection of NOX in aqueous solutions. Stimuli-receptive liquid crystals (LCs) have been employed to report aptamer-target binding events at the LC-aqueous interface. The homeotropic alignment of LCs at the aqueous-LC interface is due to the self-assembly of the cationic surfactant cetyltrimethylammonium bromide (CTAB). In the presence of the negatively charged NOX aptamer, the ordering changes to planar/tilted. On addition of NOX, the aptamer-NOX binding causes redistribution of CTAB at the LC-aqueous interface and the homeotropic orientation is restored. This results in a bright-to-dark optical transition under a polarized optical microscope (POM). This optical transition serves as a visual indicator to mark the presence of NOX. The devised aptasensor demonstrates high specificity with a minimum detection limit of 5 nM (1.596 ppb). Moreover, the application of the developed aptasensor for the detection of NOX in freshwater and soil samples underscores its practical utility in environmental monitoring. This proposed LC-based method offers several advantages over conventional detection techniques for a rapid, feasible and convenient way to detect norfloxacin.

Label-free, liquid crystal-based aptasensor for detecting carbendazim at picomolar levels

We describe a simple and sensitive liquid-crystal (LC)-based method for quantifying carbendazim (CBZ) by exploiting aptamer-specific recognition at the aqueous-LC interface. The method relies on the interfacial interaction between an aptamer and cetyltrimethylammonium bromide (CTAB); this interaction varies depending on the amount of CBZ. In the absence of CBZ, the aptamer disrupts the CTAB monolayer through electrostatic attraction, leading to a transition from homeotropic to tilted ordering of the LCs. As CBZ concentrations rise, the formation of aptamer-CBZ complexes increases, preserving the vertical alignment of the LCs by reducing collapse of the CTAB layer caused by electrostatic interactions. Using these methods, we achieved a CBZ detection limit of 3.12 pM (0.000597 μg/L) over a linear range of 0.05-5 nM. Moreover, we quantified CBZ levels in peach, soil, and tap water samples. Our LC-based detection method has significant research potential, offering sensitive, and straightforward detection of CBZ.

Ultrasensitive Point-of-Care Detection of Protein Markers Using an Aptamer-CRISPR/Cas12a-Regulated Liquid Crystal Sensor (ALICS)

Despite extensive efforts, point-of-care testing (POCT) of protein markers with high sensitivity and specificity and at a low cost remains challenging. In this work, we developed an aptamer-CRISPR/Cas12a-regulated liquid crystal sensor (ALICS), which achieved ultrasensitive protein detection using a smartphone-coupled portable device. Specifically, a DNA probe that contained an aptamer sequence for the protein target and an activation sequence for the Cas12a-crRNA complex was prefixed on a substrate and was released in the presence of target. The activation sequence of the DNA probe then bound to the Cas12a-crRNA complex to activate the collateral cleavage reaction, producing a bright-to-dark optical change in a DNA-functionalized liquid crystal interface. The optical image was captured by a smartphone for quantification of the target concentration. For the two model proteins, SARS-CoV-2 nucleocapsid protein (N protein) and carcino-embryonic antigen (CEA), ALICS achieved detection limits of 0.4 and 20 pg/mL, respectively, which are higher than the typical sensitivity of the SARS-CoV-2 test and the clinical CEA test. In the clinical sample tests, ALICS also exhibited superior performances compared to those of the commercial ELISA and lateral flow test kits. Overall, ALICS represents an ultrasensitive and cost-effective platform for POCT, showing a great potential for pathogen detection and disease monitoring under resource-limited conditions.

Liquid crystal based sensor for antimony ions detection using poly-adenine oligonucleotides

Antimony is highly toxic and a key water pollutant, which needs to be monitored closely. To date, however, most analytical methods for antimony detection are quite limited because they are complicated, expensive, and not suitable for real-time monitoring of antimony. In this study, a label-free and rapid method for antimony ions (Sb3+) detection is developed based on liquid crystals and a 10-mer poly-adenine oligonucleotide as a specific recognition probe for the first time. The working principle is based on the binding of the oligonucleotide to Sb3+, which weakens the interaction between the oligonucleotide and cationic surfactants. As a result, the event induces a planar-to-homeotropic orientational change of liquid crystals and a bright-to-dark optical change under crossed polars. This liquid crystal-based optical sensor exhibits a rapid response to Sb3+ in 10 s, a detection range between 20 nM and 5 μM, and a detection limit at 6.7 nM calculated from 10-mins assay time. It also shows good selectivity against other metal ions including Ag+, Cd2+, Cu2+, Fe3+, K+, Mg2+, Mn2+, Na+, Pb2+, and Zn2+. Moreover, this system can be used to detect Sb3+ in aqueous solutions with different pH or ionic strengths. This simple, fast, and low-cost liquid crystal-based sensing approach with high sensitivity and selectivity has a high potential for detecting Sb3+ in natural environments and industrial wastewater.

A liquid crystal-based sensor exploiting the aptamer-mediated recognition at the aqueous/liquid crystal interface for sensitive detection of serotonin

We report here a liquid crystal (LC)-based sensor for detecting serotonin (5-HT); the proposed sensor uses target-specific aptamer recognition at a cationic surfactant decorated-aqueous/LC interface. Our detection strategy focuses on the orientational transition of LCs upon biological interactions at the interface. In this sensing system, the cationic surfactant hexadecyltrimethylammonium bromide (CTAB) forms a self-assembled monolayer at the aqueous/LC interface and triggers the homeotropic orientation of LCs. After introducing the 5-HT specific aptamer, an electrostatic attraction occurs between the cationic CTAB and anionic aptamer. This interaction destructs the surfactant monolayer at the interface, inducing reorganization of LC alignment from homeotropic to tilted conditions. In the increasing 5-HT levels, specific binding between 5-HT and the aptamer diminishes the interaction between the aptamer and CTAB, thereby maintaining the homeotropic alignment of LCs. The orientational transition of the LCs was observed under a polarized optical microscope. The developed biosensor has a linear detection range from 1 to 1000 nM and a detection limit of 1.68 nM. Moreover, the sensor was applied to a human urine sample and a detection limit of 2.25 nM was obtained. Overall, the designed LC-based sensor is a sensitive, simple, cost effective, and selective platform for detecting 5-HT in aqueous solutions.

Optical sensing of tetracycline concentration using a liquid crystal-based platform targeting the chelating properties of tetracycline

In this study, a liquid crystal (LC)-based assay for the real-time detection of tetracycline (Tc) was developed. The sensor was constructed by implementing an LC-based platform that utilized the chelating properties of Tc to target Tc metal ions. This design enabled Tc-dependent induction of changes in the optical image of the LC; these modifications could then be observed in real-time with the naked eye. The performance of the sensor in detecting Tc was investigated with various metal ions to identify the most effective metal ion for Tc detection. In addition, the selectivity of the sensor was evaluated using different antibiotics. A correlation between Tc concentration and the optical intensity of the LC optical images was established, which enabled the quantification of Tc concentrations. The proposed method can detect Tc concentrations with a detection limit as low as 2.67 pM. Tests were conducted on milk, honey, and serum samples, which demonstrated that the proposed assay is highly accurate and reliable. The high sensitivity and selectivity of the proposed method make it a promising tool for real-time Tc detection, with potential applications in fields ranging from biomedical research to agriculture.

Optical Fingerprinting of Dynamic Interfacial Reaction Pathways Using Liquid Crystals

Reactions at interfaces between fluid phases are widely used to synthesize small molecules, polymers, and nanoparticles. In situ monitoring of the underlying dynamic reaction pathways remains challenging. Liquid crystals (LCs) have been used to detect simple chemical transformations at interfaces in situations where interface-bound reactants and products trigger distinct equilibrium orientations of LCs. However, whether or not LCs can be used to report complex reaction pathways via nonequilibrium states generated by reactions has not been explored. Here we explore this question using S_N2' nucleophilic substitution reactions that involve a synthetic amphiphile and a series of amine-based nucleophiles with one to four reaction sites. Although all reactants and products generate the same equilibrium LC orientation, we find that each nucleophile defines a distinct set of possible reaction pathways with a characteristic spatial and temporal LC optical response unique to the nucleophile. Additional experiments reveal that the nonequilibrium orientational states of the LCs arise from a combination of dynamic interfacial processes that include adsorption/desorption of reactants, the presence of reaction intermediates on the LC interface, and the generation of interfacial tension gradients (Marangoni stresses). Overall, our results reveal that the spatiotemporal optical outputs of LCs ("optical fingerprints") can be a rich source of information regarding interfacial reactions.

DNA-Modified Liquid Crystal Droplets

In this work, we have combined the advantages of sequence programmability of DNA nanotechnology and optical birefringence of liquid crystals (LCs). Herein, DNA amphiphiles were adsorbed onto LC droplets. A unique phenomenon of LC droplet aggregation was demonstrated, using DNA-modified LC droplets, through complementary DNA hybridization. Further functionalization of DNA-modified LC droplets with a desired DNA sequence was used to detect a wide range of chemicals and biomolecules, such as Hg²⁺, thrombin, and enzymes, through LC droplet aggregation and vice versa, which can be seen through the naked eye. These DNA-modified LC droplets can be printed onto a desired patterned surface with temperature-induced responsiveness and reversibility. Overall, our work is the first to report DNA-modified LC droplet, which provides a general detection platform based on the development of DNA aptamers. Additionally, this work inspires the exploration of surface information visualization combined with microcontact printing.

Simple and Rapid Detection of Ibuprofen─A Typical Pharmaceuticals and Personal Care Products─by a Liquid Crystal Aptasensor

This work established a liquid crystal (LC) aptasensor for simple and rapid detection of ibuprofen, a typical pharmaceuticals and personal care products (PPCPs) pollutant. A negatively charged DNA aptamer specific for ibuprofen and a positively charged amphiphilic surfactant, hexadecyltrimethylammonium bromide (CTAB), were incubated with the sample and then directly added onto the LC interface. In the presence of ibuprofen, the specific binding of ibuprofen with the DNA aptamer will release CTAB, which then adsorbed at the LC-aqueous interface and induced the orientational change of LCs to homeotropic orientation with a dark optical signal output. While in the absence of ibuprofen, the DNA aptamer binds with CTAB through hydrophobic and electrostatic interactions, LCs remained in the planar orientation with a bright optical signal output. This LC aptasensor also has good specificity for ibuprofen and can even detect ibuprofen drug in tap water. Moreover, the response time of the LC aptasensor is fast in minutes. Additionally, this LC aptasensor benefits in monitoring the water quality and inspires the exploration of a general platform for PPCPs detection.

Combination of liquid crystal and deep learning reveals distinct signatures of Parkinson's disease-related wild-type α-synuclein and six pathogenic mutants

α-Synuclein is a central player in Parkinson's disease (PD) pathology. Various point mutations in α-synuclein have been identified to alter the protein-phospholipid binding behavior and cause PD. Therefore, exploration of α-synuclein-phospholipid interaction is important for understanding the PD pathogenesis and helping the early diagnosis of PD. Herein, a phospholipid-decorated liquid crystal (LC)-aqueous interface is constructed to investigate the binding between α-synucleins (wild-type and six familial mutant A30P, E46K, H50Q, G51D, A53E and A53T) and phospholipid. The application of deep learning analyzes and reveals distinct LC signatures generated by the binding of α-synuclein and phospholipid. This system allows for the identification of single point mutant α-synucleins with an average accuracy of 98.3±1.3% in a fast and efficient manner. We propose that this analytical methodology provides a new platform to understand α-synuclein-lipid interactions, and can be potentially developed for easy identification of α-synuclein mutations in common clinic.

Control of Liquid Crystal Microarray Optical Signals Using a Microspectral Mode Based on Photonic Crystal Structures

Herein, a novel liquid crystal microarray (LCM) film with optical regulation ability is first constructed by combining liquid crystals (LC) and the highly ordered microporous structure of inverse opal photonic crystals (IOPhCs). The LCM films are fabricated by infiltrating LC molecules into the LC polymer with the structure of IOPhCs, and their properties are very different from those without the LC. Interestingly, the optical property of LCM films can be controlled by changing the orientation of LC molecules, which varies with the interfacial force. In combination with polarization images, spectral reflection peak, circular dichroism spectra, potential difference, and fluorescence images of LCM films, the mechanism of this change is investigated. It is found that the exposed basic group of single-stranded DNA is the key to the change of the optical property of LC microarrays. Meanwhile, the optical signals of LC microarrays based on the PhCs provide a novel LC signal mode for an LC sensing system (microspectral signal mode), and it can be recorded by a fiber-optic spectrometer, which is a great improvement on LC sensing signals. Therefore, the LC microarray sensing signal can be used for accurate analysis of targets by the change of the reflection peak intensity of PhCs. When the LC molecules are induced by different aptamers, the LC microarray sensing interface can be further used for the determination of different targets, such as cocaine and Hg²⁺. The research on LCM films is of significant value for the development of LC sensing technology and also shows great application prospects in biochemical sensing fields.

Simple, rapid and sensitive detection of Parkinson's disease related alpha-synuclein using a DNA aptamer assisted liquid crystal biosensor

Alpha-synuclein (αS) has been proposed as a potential biomarker for the diagnosis of Parkinson's disease (PD). However, the detection of αS using a simple, rapid and sensitive approach is still challenging. Herein, we construct a new type of biosensor for the detection of αS, combining the stimuli-responsiveness of liquid crystals (LCs) and the specific interaction of a DNA aptamer with proteins. In principle, the positively charged surfactant hexadecyltrimethylammonium bromide (CTAB) binds with the negatively charged DNA aptamer via electrostatic interactions; in the presence of αS, the DNA aptamer specifically binds with αS and releases CTAB, which is an amphiphilic molecule and subsequently assembles at the LC-aqueous interface, resulting in a homeotropic alignment of LCs with a dark optical signal. In the absence of αS, CTAB binds with the DNA aptamer without affecting the alignment of LCs, which shows planar anchoring with a bright optical signal. The response time of LCs towards αS is rapid and can be down to minutes. The LC biosensor established here has a good specificity for αS and can recognize αS even from a mixture of proteins. The LC biosensor also exhibits high sensitivity with a limit of detection of αS as low as 10 pM, which is comparable to that of the enzyme-linked immunosorbent assay. This work provides a new strategy for the detection of αS in a simple, rapid and sensitive manner, possessing promising potentials towards early diagnosis and clinical applications.

Screening of Xanthine Oxidase Inhibitors by Liquid Crystal-Based Assay Assisted with Enzyme Catalysis-Induced Aptamer Release

Small-molecule drugs play an important role in the treatment of various diseases. The screening of enzyme inhibitors is one of the most important means in developing therapeutic drugs. Herein, we demonstrate a liquid crystal (LC)-based screening assay assisted with enzyme catalysis-induced aptamer release for screening xanthine oxidase (XOD) inhibitors. The oxidation of xanthine by XOD prevents the specific binding of xanthine and its aptamer, which induces a bright image of LCs. However, when XOD is inhibited, xanthine specifically binds to the aptamer. Correspondingly, LCs display a dark image. Three compounds are identified as potent XOD inhibitors by screening a small library of triazole derivatives using this method. Molecular docking verifies the occupation of the active site by the inhibitor, which also exhibits excellent biocompatibility to HEK293 cells and HeLa cells. This strategy takes advantages of the unique aptamer-target binding, specific enzymatic reaction, and simple LC-based screening assay, which allows high-throughput and label-free screening of inhibitors with high sensitivity and remarkable accuracy. Overall, this study provides a competent and promising approach to facilitate the screening of enzyme inhibitors using the LC-based assay assisted with the enzyme catalysis-induced aptamer release.

Label-Free, Smartphone-Based, and Sensitive Nano-Structural Liquid Crystal Aligned by Ceramic Silicon Compound-Constructed DMOAP-Based Biosensor for the Detection of Urine Albumin

INTRODUCTION

The sensitive interfacial interaction of liquid crystals (LC) holds potential for precision biosensors. In the past, the developments of LC biosensors were limited by the complicated manufacturing process, which hinders commercialization and wider applications of such devices. In this report, we demonstrate the first nano-structural polymeric stabilized-cholesteric LC (PSCLC) thin films to be a new label-free biosensing technology.

METHODS

The transmission spectra of PSCLC devices were measured by the fiber-optic spectrometer with high-resolution. In addition, a smartphone was set on the stage, and the camera of smartphone was placed and aligned with a set of lenses embedded in the designed stage. To decrease the chromatic and spherical aberrations, an achromatic lens set composition, consisting of both dual-convex lens and concave-plane lens, was applied for measuring and imaging the PSCLC texture. The average and the estimated standard deviation (SD) were used to present quantitative experimental results. The test BSA was immobilized and fulfilled by the ceramic silicon-constructed DMOAP-coated glass in aqueous BSA solutions at 1 mg/mL, 1 µg/mL, and 1 ng/mL.

RESULTS

The fabrication process of PSCLC is much simplified compared to previous LC biosensors. The color of PSCLC biosensor altered with the BSA concentration, making detection result easy to read. The detection limit of 1 ng/mL is achieved for label-free PSCLC biosensor. The PSCLC biosensor was able to successfully detect due to the albumin concentration's alteration, with a linear range of 1 ng/mL-2 mg/mL. Thus, the label-free-proposed design-integrated nanoscale PSCLCs smartphone-based biosensor could successfully detect BSA in a preclinical urine sample.

CONCLUSION

Finally, we propose a design to integrate the PSCLC biosensor with a smartphone. The PSCLC owns potential for high performance, low cost for detecting various disease biomarkers in home use. Owing to its great potential for high performance and low cost, the PSCLC biosensors can be used as a label-free point-of-care for detecting various disease biomarkers for patients in care homes.

Liquid crystal-based sensing platform for detection of Pb2+ assisted by DNAzyme and rolling circle amplification

Lead ions (Pb²⁺) are one of the most widespread heavy metal contaminants that pose detrimental impact on environment and human health. We demonstrate a highly sensitive and specific liquid crystal (LC)-based sensing platform for detecting Pb²⁺ assisted by DNAzyme and rolling circle amplification (RCA). Magnetic beads (MBs) are functionalized with DNA duplexes of the catalytic strands (DNAzymes) and the substrate strands. In the presence of Pb²⁺, the substrate strands are disassembled due to activation of the DNAzyme, which allows initiation of DNA RCA on MBs. The amplified DNA strands can disrupt arrangement of octadecy trimethyl ammonium bromide monolayers (OTAB), thereby inducing planar orientation of LC molecules at the interface of aqueous and LCs. Thus, LCs exhibit bright appearance. In contrast, RCA cannot be triggered in the absence of Pb²⁺. Therefore, LC molecules adopt perpendicular orientation at the interface, which induces the dark morphology of LCs. The limit of detection reaches as low as 16.7 pM. It is an improvement of more than two orders of magnitude compared to that of previously reported LC-based sensing approaches. This approach also shows excellent performance in monitoring Pb²⁺ in tap water and lake water.

Recent advances in computational methods for biosensor design

Biosensors are analytical tools with a great application in healthcare, food quality control, and environmental monitoring. They are of considerable interest to be designed by using cost-effective and efficient approaches. Designing biosensors with improved functionality or application in new target detection has been converted to a fast-growing field of biomedicine and biotechnology branches. Experimental efforts have led to valuable successes in the field of biosensor design; however, some deficiencies restrict their utilization for this purpose. Computational design of biosensors is introduced as a promising key to eliminate the gap. A set of reliable structure prediction of the biosensor segments, their stability, and accurate descriptors of molecular interactions are required to computationally design biosensors. In this review, we provide a comprehensive insight into the progress of computational methods to guide the design and development of biosensors, including molecular dynamics simulation, quantum mechanics calculations, molecular docking, virtual screening, and a combination of them as the hybrid methodologies. By relying on the recent advances in the computational methods, an opportunity emerged for them to be complementary or an alternative to the experimental methods in the field of biosensor design.

A novel, label-free liquid crystal biosensor for Parkinson's disease related alpha-synuclein

A liquid crystal biosensor based on DNA aptamer for sensitive detection of Parkinson's Disease (PD) related alpha-synuclein was developed. This LC biosensor is constructed using a simple and label free method, and it not only enables early PD diagnosis, but also provides a general platform for detection based on DNA aptamer.

Biomolecular Binding at Aqueous Interfaces of Langmuir Monolayers of Bioconjugated Amphiphilic Mesogenic Molecules: A Molecular Dynamics Study

We report a molecular dynamics (MD) simulation study of protein binding at the aqueous-liquid crystal (LC) interfaces of bioconjugated mesogenic molecules. As a simple model of these interfaces, we use monolayers composed of biotin-conjugated or biotin-free amphiphilic mesogenic molecules and streptavidin in water. The all-atom MD simulations reveal that the binding of streptavidin to the biotin mesogenic monolayer is significantly stronger than that to biotin-free mesogenic monolayers. Although specific protein binding marginally increases the overall orientational order and the tilt of the biotin-conjugated mesogenic molecules of the monolayer, significant changes in tilt were observed near the bound protein (in contrast to the protein interaction with the monolayer without biotin). We also observe that specific protein binding changes the dynamic properties of the mesogens within the monolayer (e.g., lateral diffusion coefficients) and associated water. Overall, these MD simulations advance our understanding of the molecular-level phenomena involved in the binding of biomolecules and subsequent dynamic changes at the aqueous-LC interfaces. These results provide guidance to future molecular-level designs of biofunctional LC interfaces.

Label-free liquid crystal-based biosensor for detection of dopamine using DNA aptamer as a recognition probe

We present a label-free liquid crystal-based biosensor for the detection of dopamine (DA) in aqueous solutions using dopamine-binding aptamers (DBA) as recognition elements. In this system, the dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride (DMOAP) self-assembled monolayers immobilized on glass slides support the long alkyl chains that keep the liquid crystal (LC) molecules in a homeotropic orientation. Glutaraldehyde (GA) is used as a cross-linker to immobilize DBA onto the surface of glass slides. The specific binding of DA and DBA disrupts the homeotropic orientation of LCs, thereby inducing a change in the orientation from homeotropic to a random alignment. This orientation change can be converted and visualized simply as a transition from a dark optical LC image to a brighter image under a polarized optical microscope (POM), enabling the detection of DA. The developed LC-based aptasensor shows a good linear optical response towards DA in the very wide range of 1 pM-10 μM (0.19 pg/mL to 1.9 μg/mL) and has a very low detection limit of 10 pM (∼1.9 pg/mL). The biosensor also exhibited satisfactory selectivity and could be successfully applied to detect DA in human urine. The proposed LC-based aptamer sensing method offers a simple, rapid, highly sensitive and selective, and a label-free method for the analysis of DA in real clinical samples.

Soft matter from liquid crystals

Liquid crystals (LCs) are fluids within which molecules exhibit long-range orientational order, leading to anisotropic properties such as optical birefringence and curvature elasticity. Because the ordering of molecules within LCs can be altered by weak external stimuli, LCs have been widely used to create soft matter systems that respond optically to electric fields (LC display), temperature (LC thermometer) or molecular adsorbates (LC chemical sensor). More recent studies, however, have moved beyond investigations of optical responses of LCs to explore the design of complex LC-based soft matter systems that offer the potential to realize more sophisticated functions (e.g., autonomous, self-regulating chemical responses to mechanical stimuli) by directing the interactions of small molecules, synthetic colloids and living cells dispersed within the bulk of LCs or at their interfaces. These studies are also increasingly focusing on LC systems driven beyond equilibrium states. This review presents one perspective on these advances, with an emphasis on the discovery of fundamental phenomena that may enable new technologies. Three areas of progress are highlighted; (i) directed assembly of amphiphilic molecules either within topological defects of LCs or at aqueous interfaces of LCs, (ii) templated polymerization in LCs via chemical vapor deposition, an approach that overcomes fundamental challenges related to control of LC phase behavior during polymerization, and (iii) studies of colloids in LCs, including chiral colloids, soft colloids that are strained by LCs, and active colloids that are driven into organized states by dissipation of energy (e.g. bacteria). These examples, and key unresolved issues discussed at the end of this perspective, serve to convey the message that soft matter systems that integrate ideas from LC, surfactant, polymer and colloid sciences define fertile territory for fundamental studies and creation of future transformative technologies.

Detection of Biomarkers in Blood Using Liquid Crystals Assisted with Aptamer-Target Recognition Triggered in Situ Rolling Circle Amplification on Magnetic Beads

Detection of biomarkers in body fluids is critical to both diagnosing the life-threatening diseases and optimizing therapeutic interventions. We herein report use of liquid crystals (LCs) to detect biomarkers in blood with high sensitivity and specificity by employing in situ rolling circle amplification (RCA) on magnetic beads (MBs). Specific recognition of cancer biomarkers, such as platelet derived growth factor BB (PDGF-BB) and adenosine, by aptamers leads to formation of a nucleic acid circle on MBs preassembled with ligation DNA, linear padlock DNA, and aptamers, thereby triggering in situ RCA. LCs change from dark to bright appearance after the in situ RCA products being transferred onto the LC interface decorated with octadecy trimethylammonium bromide (OTAB), which is particularly sensitive to the amplified DNA on MBs. Overall, this label-free approach takes advantages of high specificity of aptamer-based assay, efficient enrichment of signaling molecules on MBs, remarkable DNA elongation performance of the RCA reaction, and high sensitivity of LC-based assay. It successfully eliminates the matrix interference on the LC-based sensors and thus achieves at least 4 orders of magnitude improvement in sensitivity for detection of biomarkers compared to other LC-based sensors. In addition, performance of the developed sensor is comparable to that of the commercial ones. Thus, this study provides a simple, powerful, and promising approach to facilitate highly sensitive, specific, and label-free detection of biomarkers in body fluids.

Design of a liquid crystal-based aptasensing platform for ultrasensitive detection of tetracycline

We develop a novel label-free liquid crystal (LC) aptasensor based on intrinsic properties of nematic LCs for ultra-sensitive detection of tetracycline. The aptasensor is assembled by immobilizing aptamers onto the glass slide modified with both homeotropic alignment and silane coupling agents. Designed aptasensor makes use of the target-induced aptamer conformational switching and disruption of the orientation of LCs which lead to an obvious change of the optical appearance from a dark to a bright response. We describe the optimized condition for maintaining the homeotropic orientation of LCs, which are suitable for the tetracycline detection. The average gray-scale intensities of polarizing optical microscopy images were calculated to quantitatively detect tetracycline concentrations. The aptasensor works especially at trace level of tetracycline as low as 0.5 pM. Moreover, the LC aptasensor was successfully used to detect tetracycline in the real milk sample. According to the results, the proposed LC aptasensor for tetracycline detection is simple, ultra-sensitive, label free and ease of preparation.

Liquid Crystal based Detection of Pb(II) Ions Using Spinach RNA as Recognition Probe

We report a new method for label-free, sensitive, and facile detection of lead(II) ions (Pb²⁺) based on an aptamer-target binding event, which is recognized by orientations of liquid crystals (LCs) at aqueous interfaces. The LC film suspended in the aqueous phase demonstrated a homeotropic orientation in contact with a cationic surfactant cetyltrimethylammonium bromide (CTAB) due to self-assembly of CTAB molecules at the aqueous-LC interface. The ordering of LC subsequently changed to planar in the presence of the spinach RNA aptamer (SRNA) due to interactions between CTAB and SRNA. In the presence of the Pb²⁺ ion, the ordering of LC changed to homeotropic caused by reorganization of CTAB at the LC-aqueous interface. This is due to formation of more stable quadruplex structures of SRNA with Pb²⁺ ions in comparison to the CTAB-SRNA complex. The sensor exhibited a detection limit of 3 nM, which is well below the permissible limit of Pb²⁺ in drinking water. Our experiments establish that addition of Pb²⁺ leads to (i) the formation of Pb²⁺-SRNA complexes and (ii) a decrease in density of SRNA on the LC interface, but additional studies are required to determine which of these processes underlie the response of the LCs to the Pb²⁺. We have also demonstrated the potential application of the LC sensor for detection of Pb²⁺ in tap water. Unlike current laboratory-based heavy-metal-ion assays, this method is comparatively simple in terms of instrumentation, operation, and optical readout.

Investigation of the Assembly Behavior of an Amphiphilic Lipopeptide at the Liquid Crystal-Aqueous Interface

In this article, we designed an amphiphilic lipopeptide molecule, 5(6)-carboxyfluorescein-KKKKKKSKTK-Cys(C₁₂H₂₅)-OMe (FAM-lipopeptide-C12), and studied its assembly behavior at the 4-cyano-4'-pentylbiphenyl (5CB)-aqueous interface. The ordering transitions of liquid crystals (LCs) revealed that FAM-lipopeptide-C12 can assemble at the LC-aqueous interface (both planar and curved interfaces). The assembly can be destroyed by adding trypsin, which catalyzes the hydrolysis of lipopeptides. Fluorescence measurements further confirmed the assembly and deassembly behavior of FAM-lipopeptide-C12 at the LC-aqueous interface. Overall, our work provides a general method for the construction of a biointerface by directly assembling amphiphilic lipopeptides at the LC-aqueous interface, which can potentially be used in selectively detecting the activity of specific enzymes and other biomolecular interactions.

Fabrication of Liquid-Crystal-Based Optical Sensing Platform for Detection of Hydrogen Peroxide and Blood Glucose

Rapid and accurate determination of H₂O₂ is of great importance in practical applications. In this study, we demonstrate construction of liquid-crystal (LC)-based sensing platforms for sensitive and real-time detection of H₂O₂ with high accuracy for the first time. Single-stranded DNA (ssDNA) adsorbed onto the surface of nanoceria is released to the aqueous solution in the presence of H₂O₂, which disrupts arrangement of the self-assembled cationic surfactant monolayer decorated at the aqueous/LC interface. Thus, the orientation of LCs changes from a homeotropic to planar state, leading to change in the optical response from dark-to-bright appearance. As H₂O₂ can be produced during oxidation of glucose by glucose oxidase (GOx), detection of glucose is also fulfilled by employing the H₂O₂ sensing platform. Our system can detect H₂O₂ and glucose with concentrations as low as 28.9 nM and 0.52 μM, respectively. It shows high promise of using LC-based sensors for the detection of H₂O₂ and its relevant biomarkers in practical applications.

A novel logic gate based on liquid-crystals responding to the DNA conformational transition

Described herein is a novel liquid crystal (LC)-based DNA logic gate constructed via employing the reorientation of LCs triggered by metal-ion-mediated DNA probe conformational changes.

Poly(l-lysine)-Coated Liquid Crystal Droplets for Sensitive Detection of DNA and Their Applications in Controlled Release of Drug Molecules

Interactions between DNA and adsorbed poly(l-lysine) (PLL) on liquid crystal (LC) droplets were investigated using polarizing optical microcopy and epi-fluorescence microscopy. Earlier, we demonstrated that adsorption of PLL to the LC/aqueous interface resulted in homeotropic orientation of the LC and thus exhibited a radial configuration of the LC confined within the droplets. Subsequent adsorption of DNA (single-stranded DNA/double-stranded DNA) at PLL-coated LC droplets was found to trigger an LC reorientation within the droplets, leading to preradial/bipolar configuration of those droplets. To our surprise, subsequent exposure of complementary ssDNA to ssDNA/adsorbed PLL-modified LC droplets did not cause the LC reorientation. This is likely due to the formation of polyplexes (DNA-PLL complex) as confirmed by fluorescence microscopy and atomic force microscopy. In addition, dsDNA-adsorbed PLL droplets have been found to be effectively useful to displace (controlled release) propidium iodide (a model drug) encapsulated within dsDNA over time. These observations suggest the potential for a label-free droplet-based LC detection system that can respond to DNA and may provide a simple method to develop DNA-based drug nanocarriers.

Thermotropic liquid crystal films for biosensors and beyond

Recent results on structural properties and possible bio-sensing applications of planar liquid crystal films are reviewed.

The Assembly of DNA Amphiphiles at Liquid Crystal-Aqueous Interface

In this article, we synthesized a type of DNA amphiphiles (called DNA-lipids) and systematically studied its assembly behavior at the liquid crystal (LC)—aqueous interface. It turned out that the pure DNA-lipids at various concentrations cannot trigger the optical transition of liquid crystals from planar anchoring to homeotropic anchoring at the liquid crystal—aqueous interface. The co-assembly of DNA-lipid and l-dilauroyl phosphatidylcholine (l-DLPC) indicated that the DLPC assembled all over the LC-aqueous interface, and DNA-lipids prefer to couple with LC in certain areas, particularly in polarized and fluorescent image, forming micron sized net-like structures. The addition of DNA complementary to DNA-lipids forming double stranded DNA-lipids caused de-assembly of DNA-lipids from LC-aqueous interface, resulting in the disappearance of net-like structures, which can be visualized through polarized microscope. The optical changes combined with DNA unique designable property and specific interaction with wide range of target molecules, the DNA-lipids decorated LC-aqueous interface would provide a new platform for biological sensing and diagnosis.

Structure-Specific Liquid Crystal Anchoring Induced by the Molecular Combing of Short Oligonucleotides

Surface-immobilized oligonucleotides were "combed" by meniscus motion and exposed to a nematic liquid crystal (LC). Although the oligonucleotides were as short as 16 bases, they were apparently oriented by this process and, in turn, successfully biased the orientation of the adjacent LC material. Single-stranded DNA (ssDNA) induced LC orientation in the combing direction, while hybridized double-stranded DNA (dsDNA) rotated the azimuthal LC orientation by ∼30° from the combing direction. The sensitivity of the chiral response to mixed ssDNA/dsDNA surfaces was characterized by employing complementary DNA that was longer than the immobilized DNA, resulting in single-stranded overhangs of various lengths. A rotated LC orientation was observed even when more than 70% of the DNA was single-stranded, and the transition from the rotated to nonrotated response was apparently discontinuous as a function of ssDNA surface coverage. These phenomena represent a sensitive DNA hybridization detection strategy that can potentially comprise a multiplexed assay.

Synthetic Mimics of Bacterial Lipid A Trigger Optical Transitions in Liquid Crystal Microdroplets at Ultralow Picogram-per-Milliliter Concentrations

We report synthetic six-tailed mimics of the bacterial glycolipid Lipid A that trigger changes in the internal ordering of water-dispersed liquid crystal (LC) microdroplets at ultralow (picogram-per-milliliter) concentrations. These molecules represent the first class of synthetic amphiphiles to mimic the ability of Lipid A and bacterial endotoxins to trigger optical responses in LC droplets at these ultralow concentrations. This behavior stands in contrast to all previously reported synthetic surfactants and lipids, which require near-complete monolayer coverage at the LC droplet surface to trigger ordering transitions. Surface-pressure measurements and SAXS experiments reveal these six-tailed synthetic amphiphiles to mimic key aspects of the self-assembly of Lipid A at aqueous interfaces and in solution. These and other results suggest that these amphiphiles trigger orientational transitions at ultralow concentrations through a unique mechanism that is similar to that of Lipid A and involves formation of inverted self-associated nanostructures at topological defects in the LC droplets.

Liquid Crystal Interfaces Programmed with Enzyme-Responsive Polymers and Surfactants

Synthesis of biologically active peptide-polymer amphiphiles (PPAs), and characterization of assemblies formed by PPAs at the interfaces of liquid crystal (LC) microdroplets, is shown to permit the use of PPAs in strategies that can trigger ordering transitions in LC microdroplets in response to targeted biomolecular events.

pH-Driven Ordering Transitions in Liquid Crystal Induced by Conformational Changes of Cardiolipin

We report an investigation of interfacial phenomena occurring at aqueous-liquid crystal (LC) interfaces that triggers an orientational ordering transition of the LC in the presence of cardiolipin (CL) by varying pH, salt concentration and valence. In particular, the effects of three different conformational isomeric forms of the CL are observed to cause the response of the LC ordering to vary significantly from one to another at those interfaces. An ordering transition of the LC was observed when the CL is mostly in undissociated (at pH 2) and/or in bicyclic (at pH 4) conformation in which LC shows changes in the optical appearance from bright to dark. By contrast, no change in the optical appearance of the LC was observed when the pH of the system increases to 8 or higher in which the CL mostly exists in the open conformation. Fluorescence microscopy measurements further suggest that pH-dependent conformational forms of the CL have different ability to self-assemble (thus different packing efficiency) at aqueous-LC interfaces leading to dissimilar orientational behavior of the LC. Specifically, we found that change in headgroup-headgroup repulsion of the central phosphatidyl groups of the CL plays a key role in tuning the lipid packing efficiency and thus responses to interfacial phenomena. Orientational ordering transition of the LC was also observed as a function of increasing the ionic strength (buffer capacity) and strongly influenced in the presence of mono and divalent cations. Langmuir-Blodgett (LB) and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) measurements provide further insight in modulation of the lipid packing efficiency and alkyl chain conformation of the CL at different pH and ionic conditions. Overall, the results presented in this paper establish that LCs offer a promising approach to differentiate different conformations (label free detection) of the CL through ordering transition of the LC at aqueous-LC interfaces.

Aptamers: active targeting ligands for cancer diagnosis and therapy

Aptamers, including DNA, RNA and peptide aptamers, are a group of promising recognition units that can specifically bind to target molecules and cells. Due to their excellent specificity and high affinity to targets, aptamers have attracted great attention in various fields in which selective recognition units are required. They have been used in biosensing, drug delivery, disease diagnosis and therapy (especially for cancer treatment). In this review, we summarized recent applications of DNA and RNA aptamers in cancer theranostics. The specific binding ability of aptamers to cancer-related markers and cancer cells ensured their high performance for early diagnosis of cancer. Meanwhile, the efficient targeting ability of aptamers to cancer cells and tissues provided a promising way to deliver imaging agents and drugs for cancer imaging and therapy. Furthermore, with the development of nanoscience and nanotechnology, the conjugation of aptamers with functional nanomaterials paved an exciting way for the fabrication of theranostic agents for different types of cancers, which might be a powerful tool for cancer treatment.

Creation of DNA aptamers against recombinant bone morphogenetic protein 15

The oocyte-derived growth factor bone morphogenetic protein (BMP) 15 plays important roles in fertility, but its mechanism of action differs between species. Generation of BMP15-binding molecules, as an essential investigation tool, would be helpful to provide valuable insight into the underlying biological features of BMP15. The BMP15-binding molecules could be antibodies or aptamers. Aptamers have many advantages over antibodies as macromolecular ligands for target proteins. DNA aptamers can be obtained by a method of Systematic Evolution of Ligands by EXponential enrichment (SELEX) beginning with a pool of random sequences. However, the success of this technique cannot be guaranteed if the initial pool lacks candidate sequences. Herein, we report on the creation of DNA aptamers by means of modified SELEX. The modification included enhanced mutation and progressive selection during an in vitro evolutionary process. As a proof-of-principle, we started from a single sequence instead of a multiple-sequence pool. Functional aptamers against the recombinant BMP15 were successfully created and identified.