Asymmetric total synthesis of (-)-amphidinolide V through effective combinations of catalytic transformations

Transition-Metal-Catalyzed Transformations for the Synthesis of Marine Drugs

Transition metal catalysis has contributed to the discovery of novel methodologies and the preparation of natural products, as well as new chances to increase the chemical space in drug discovery programs. In the case of marine drugs, this strategy has been used to achieve selective, sustainable and efficient transformations, which cannot be obtained otherwise. In this perspective, we aim to showcase how a variety of transition metals have provided fruitful couplings in a wide variety of marine drug-like scaffolds over the past few years, by accelerating the production of these valuable molecules.

Highly selective Cu2+ detection with a naphthalimide-functionalised pillar[5]arene fluorescent chemosensor

Ligand 1, a rim-differentiated pillar[5]arene macrocycle modified with five naphthalimide groups through click chemistry, serves as an effective ratiometric fluorescent chemosensor for Cu2+. In contrast to the monomeric naphthalimide control compound 2, which shows only monomer emission, ligand 1 demonstrates dual emission characteristics encompassing both the monomer and excimer of the naphthalimide moieties. The binding properties of ligand 1 toward 15 different metal ions were systematically investigated in CH2Cl2/CH3CN (v/v, 1 : 1) by UV-vis and fluorescence spectroscopy. Remarkably, ligand 1 exhibits exceptional selectivity for Cu2+ ions. Upon complexation with Cu2+, the excimer emission of ligand 1 diminishes, concomitant with an enhancement of its monomer emission. The binding ratio for 1·Cu2+ was determined to be 1 : 1, with an association constant of (3.39 ± 0.40) × 105 M-1 calculated using a nonlinear least-squares curve-fitting method. Furthermore, the limit of detection (LOD) was found to be 185 ± 7 nM. Our results from 1H NMR titration, high-resolution mass spectrometry analysis and density functional theory calculations of 1·Cu2+ suggest synergistic coordination between Cu2+ and the triazole groups on ligand 1.

Catalytic C(sp)–Si cross-coupling silylation of alkynyl bromides with hydrosilanes by palladium catalysis

An unprecedented and convenient Si–C(sp) bond-forming cross-coupling of alkynyl bromides with hydrosilanes has been established for the facile synthesis of alkynylsilanes in good yields and with excellent chemoselectivity.

A Formal Rearrangement of Allylic Silanols

We show that 1M aqueous HCl/THF or NaBH₄/DMF allows for demercurative ring-opening of cyclic organomercurial synthons into secondary silanol products bearing terminal alkenes. We had previously demonstrated that primary allylic silanols are readily transformed into cyclic organomercurials using Hg(OTf)₂/NaHCO₃ in THF. Overall, this amounts to a facile two-step protocol for the rearrangement of primary allylic silanol substrates. Computational investigations suggest that this rearrangement is under thermodynamic control and that the di-tert-butylsilanol protecting group is essential for product selectivity.

Pyrrole-Based Conjugated Microporous Polymers as Efficient Heterogeneous Catalysts for Knoevenagel Condensation

Conjugated microporous polymers (CMPs) with robust architectures, facilely tunable pore sizes and large specific surface areas have emerged as an important class of porous materials due to their demonstrated prospects in various fields, e.g. gas storage/separation and heterogeneous catalysis. Herein, two new pyrrole-based CMPs with large specific surface areas and good stabilities were successfully prepared by one-step oxidative self-polycondensation of 1,2,4,5-tetra (pyrrol-2-ly)benzene or 1,3,5-tri (pyrrol-2-ly)benzene, respectively. Interestingly, both CMPs showed very high catalytic activity toward Knoevenagel condensation reaction, which was attributed to the inherent pore channels, high specific surface areas and abundant nitrogen sites within CMPs. Additionally, both CMPs displayed excellent recyclability with negligible degradation after 10 cycles. This work provides new possibilities into designing novel nitrogen-rich high-performance heterogeneous catalysts.

Synthesis of sorafenib analogues incorporating a 1,2,3-triazole ring and cytotoxicity towards hepatocellular carcinoma cell lines

A series of 1,2,3-triazole-containing Sorafenib analogues, in which the aryl urea moiety of Sorafenib (1) was replaced with a 1,2,3-triazole ring linking a substituted phenoxy fragment, were prepared successfully via Huisgen 1,3-dipolar cycloaddition and nucleophilic aromatic substitution. The studies of cytotoxicity towards human hepatocellular carcinoma (HCC) cell lines, HepG2 and Huh7, indicated that p-tert-butylphenoxy analogue 2m showed significant inhibitory activity against Huh7 with IC₅₀ = 5.67 ± 0.57 µM. More importantly, 2m showed low cytotoxicity against human embryonal lung fibroblast cell line, MRC-5, with IC₅₀ > 100 µM, suggesting its highly selective cytotoxic activity (SI > 17.6) towards Huh7 which is much superior to that of Sorafenib (SI = 6.73). The molecular docking studies revealed that the analogue 2m bound B-RAF near the binding position of Sorafenib, while it interacted VEGFR2 efficiently at the same binding position of Sorafenib. However, 2m exhibited moderate inhibitory activity toward B-RAF, implying that its anti-Huh7 effect might not strictly relate to inhibition of B-RAF. Wound healing and BrdU cell proliferation assays confirmed anti-cell migration and anti-cell proliferative activities towards Huh7. With its inhibitory efficiency and high safety profile, 2m has been identified as a promising candidate for the treatment of HCC.

A Modular, Enantioselective Synthesis of Resolvins D3, E1, and Hybrids

Resolvins D3 and E1 are important signaling molecules in the resolution of inflammation. Here, we report a convergent and flexible strategy to prepare these natural products using Hiyama-Denmark coupling of five- and six-membered cyclic alkenylsiloxanes to connect three resolvin fragments, and control the stereochemistry of the natural product (Z)-alkenes. The modular nature of this approach enables the synthesis of novel resolvin hybrids, opening up opportunities for more-extensive investigations of resolvin biology.

Synthesis of Cyclic Alkenyl Dimethylsiloxanes from Alkynyl Benzyldimethylsilanes and Application in Polyene Synthesis

Cyclic dimethylalkenylsiloxanes, useful motifs for (Z)-selective Hiyama cross-coupling, are accessed from alkynyl benzyldimethylsilanes featuring adjacent allylic or homoallylic oxygen substituents by semihydrogenation/debenzylation/cyclization. While formation of 5- and 6-membered rings can be achieved from the free alcohols using fluoride or silanolate, allylic acetate precursors to 5-membered rings display distinct modes of activation. The utility of these compounds is demonstrated through the preparation of a variety of (Z)-alkene-containing polyenes and application to a concise total synthesis of leukotriene B₃.

Synthesis of substituted Z-styrenes by Hiyama-type coupling of oxasilacycloalkenes: application to the synthesis of a 1-benzoxocane

Several Hiyama cross-coupling reactions of oxasilacycloalkenes and aryl iodides are described that produce trisubstituted Z-styrenes in moderate to excellent yields. Both electron-rich and electron-poor aryl iodides are tolerated in the cross-coupling reaction. The oxasilacycloalkene coupling partners were prepared by ruthenium-catalyzed intramolecular anti-hydrosilylation of alkynols. One of the cross-coupling products was converted to a 1-benzoxocane, albeit in low yield, using an intramolecular Buchwald–Hartwig etherification. The cyclic ether produced contains the carbon skeleton of heliannuol A.

From Resting State to the Steady State: Mechanistic Studies of Ene-Yne Metathesis Promoted by the Hoveyda Complex

The kinetics of intermolecular ene-yne metathesis (EYM) with the Hoveyda precatalyst (Ru1) has been studied. For 1-hexene metathesis with 2-benzoyloxy-3-butyne, the experimental rate law was determined to be first-order in 1-hexene (0.3-4 M), first-order in initial catalyst concentration, and zero-order for the terminal alkyne. At low catalyst concentrations (0.1 mM), the rate of precatalyst initiation was observed by UV-vis and the alkyne disappearance was observed by in situ FT-IR. Comparison of the rate of precatalyst initiation and the rate of EYM shows that a low, steady-state concentration of active catalyst is rapidly produced. Application of steady-state conditions to the carbene intermediates provided a rate treatment that fit the experimental rate law. Starting from a ruthenium alkylidene complex, competition between 2-isopropoxystyrene and 1-hexene gave a mixture of 2-isopropoxyarylidene and pentylidene species, which were trappable by the Buchner reaction. By varying the relative concentration of these alkenes, 2-isopropoxystyrene was found to be 80 times more effective than 1-hexene in production of their respective Ru complexes. Buchner-trapping of the initiation of Ru1 with excess 1-hexene after 50% loss of Ru1 gave 99% of the Buchner-trapping product derived from precatalyst Ru1. For the initiation process, this shows that there is an alkene-dependent loss of precatalyst Ru1, but this does not directly produce the active catalyst. A faster initiating precatalyst for alkene metathesis gave similar rates of EYM. Buchner-trapping of ene-yne metathesis failed to deliver any products derived from Buchner insertion, consistent with rapid decomposition of carbene intermediates under ene-yne conditions. An internal alkyne, 1,4-diacetoxy-2-butyne, was found to obey a different rate law. Finally, the second-order rate constant for ene-yne metathesis was compared to that previously determined by the Grubbs second-generation carbene complex: Ru1 was found to promote ene-yne metathesis 62 times faster at the same initial precatalyst concentration.

Gold catalysis in total synthesis – recent achievements

The most recent achievements of gold catalysed transformations applied in total synthesis of natural products are reviewed and analysed.

Tandem allylic alcohol isomerization/oxo-Michael addition reaction promoted by Re2O7

Re₂O₇ enables a tandem allylic alcohol isomerization/oxa-Michael addition reaction of cyclohexadienone.

Stereoselective Total Synthesis of (-)-Depudecin

The total synthesis of the natural product depudecin, an antiangiogenic microbial polyketide with inhibitory activity against histone deacetylases, is reported. Characterized by a highly oxidized 11-carbon chain containing two epoxides conjugated through a trans-disubstituted olefin, its total synthesis was efficiently accomplished by a novel asymmetric methodology of epoxide formation based on a new class of chiral sulfonium salts, allowing for the construction of the oxirane rings in an efficient and stereoselective fashion.

A gold-catalyzed 1,2-acyloxy migration/intramolecular cyclopropanation/ring enlargement cascade: syntheses of medium-sized heterocycles

A gold catalyzed 1,2-acyloxy migration/intramolecular cyclopropanation/ring enlargement cascade of furan substrates provides a new highly efficient procedure for the formation of ten and eleven-membered ring compounds. A new transformation type of intermolecular furan compound catalyzed by a gold catalyst was reported.

Asymmetric organocatalytic epoxidations: reactions, scope, mechanisms, and applications

Chiral epoxides serve as versatile building blocks in the synthesis of complex organic frameworks. The high strain imposed by the three-membered ring system makes epoxides prone to a variety of nucleophilic ring-opening reactions. Since the development of the Sharpless epoxidation, there have been many important contributions and advances in this area. With the rapid development of the field of asymmetric organocatalysis, a wide range of organocatalysts is now able to catalyze the epoxidation of broad class of unsaturated carbonyl compounds. In this Minireview, recent progress in the development of organocatalytic asymmetric epoxidation methods, the proposed mechanisms of these reactions and their applications as intermediates is reported.

Recent developments of direct rhenium-catalyzed [1,3]-transpositions of allylic alcohols and their silyl ethers

The direct metal-catalyzed [1,3]-transposition of allylic alcohols and allylic silyl ethers is a synthetically useful isomerization process that occurs via [3,3]-sigmatropic rearrangement induced by high oxidation state oxometal complexes. The isomerization requires only a catalytic amount of promoter, and high chirality transfer can be achieved. Thus, it bears a significant potential to become a powerful tool in multistep synthesis. Although [1,3]-transposition of allylic alcohols has been known since the late 1960s, the development of synthetically useful protocols that allow for a high level of regio- and stereoselectivity control and their synthetic applications have emerged only recently. This tutorial review summarizes recently developed regioselective [1,3]-transpositions of allylic alcohols and silyl ethers and their applications to natural product synthesis.

Re2O7-catalyzed reaction of hemiacetals and aldehydes with O-, S-, and C-nucleophiles

Re(VII) oxides catalyze the acetalization, monoperoxyacetalization, monothioacetalization and allylation of hemiacetals. The reactions, which take place under mild conditions and at low catalyst loadings, can be conducted using hemiacetals, the corresponding O-silyl ethers, and, in some cases, the acetal dimers. Aldehydes react under similar conditions to furnish good yields of dithioacetals. Reactions of hemiacetals with nitrogen nucleophiles are unsuccessful. 1,2-Dioxolan-3-ols (peroxyhemiacetals) undergo Re(VII)-promoted etherification but not allylation. Hydroperoxyacetals (1-alkoxyhydroperoxides) undergo selective exchange of the alkoxide group in the presence of either Re₂O₇ or a Brønsted acid.

Exploiting hidden symmetry in natural products: total syntheses of amphidinolides C and F

The total synthesis of amphidinolide C and a second-generation synthesis of amphidinolide F have been accomplished through the use of a common intermediate to access both the C1-C8 and the C18-C25 sections. The development of a Ag-catalyzed cyclization of a propargyl benzoate diol is described to access both trans-tetrahydrofuran rings. The evolution of a Felkin-controlled, 2-lithio-1,3-dienyl addition strategy to incorporate C9-C11 diene as well as C8 stereocenter is detailed. Key controlling aspects in the sulfone alkylation/oxidative desulfurization to join the major subunits, including the exploration of the optimum masking group for the C18 carbonyl motif, are discussed. A Trost asymmetric alkynylation and a stereoselective cuprate addition to an alkynoate have been developed for the rapid construction of the C26-C34 subunit. A Tamura/Vedejs olefination to introduce the C26 side arm of amphidnolides C and F is employed. The late-stage incorporation of the C15, C18 diketone motif proved critical to the successful competition of the total syntheses.