Dopant-Induced Modification of Active Site Structure and Surface Bonding Mode for High-Performance Nanocatalysts: CO Oxidation on Capping-free (110)-oriented CeO2:Ln (Ln = La–Lu) Nanowires

Pt-O-Ce interaction enhanced by Al substitution to promote the acetone degradation through accelerating the breaking of CC bond in acetic acid intermediate

The reaction rate of volatile organic compounds (VOCs) oxidation is controlled by the rate-limiting step in the total reaction process. This study proposes a novel strategy, by which the rate-limiting step of acetone oxidation is accelerated by enhanced chemical bond interaction with more electrons transfer through Al-substituted CeO2 loaded Pt (Pt/Al-CeO2). Results indicate that the rate-limiting step in the process of acetone oxidation is the decomposition of acetic acid. Al substitution enhances the Pt-O-Ce interaction that transfers more electrons from Pt/Al-CeO2 to acetic acid, promoting the breaking of its CC bond with a lower free energy barrier. Attributing to these, the reaction rate of Pt/Al-CeO2 is 13 times as high as that of Pt/CeO2 and its TOFPt value is 11 times as high as that of Pt/CeO2 at 150 °C. Moreover, the CO2 selectivity of Pt/Al-CeO2 also increases by 22 %. This work establishes the relationship between Pt-O-Ce interaction and acetone oxidation that provides novel perspectives on the development of efficient materials for VOCs oxidation.

Modulating the effective ionic radii of trivalent dopants in ceria using a combination of dopants to improve catalytic efficiency for the oxygen evolution reaction

Aliovalent doping in ceria and defect engineering are important aspects in tuning the properties of ceria for advanced technological applications, especially in the emerging field of electrocatalytic water-splitting for harvesting renewable energy. However, the ambiguity regarding the choice of dopants/co-dopants and ways to deal with the size difference between dopants and lattice hosts remains a long-standing problem. In this study, ceria was aliovalently codoped with Sc3+ and La3+ while keeping the total concentration of dopants constant; the ionic radius of the former is smaller and that of the latter is larger than Ce4+. Variations in the relative amounts of these dopants helped to modulate the effective ionic radii and match that of the host. A systematic study on the role of these aliovalent dopants in defect evolution in ceria and in modulating the Ce3+ fraction using powder XRD, Rietveld refinement, positron annihilation lifetime spectroscopy, X-ray photoelectron spectroscopy, Eu3+ photoluminescence, and Raman spectroscopy is presented here. The evolved defects and their dependence on subtle factors other than charge compensation are further correlated with their electrocatalytic activity towards oxygen evolution reaction (OER) in alkaline medium. The catalyst with an optimum defect density, maximum Ce3+ fraction at the surface and the least effective ionic radius difference between the dopants and the host demonstrated the best performance towards the OER. This study demonstrates how effective ionic radius modulation in defect-engineered ceria through a judicious choice of codopants can enhance the catalytic property of ceria and provides immensely helpful information for designing ceria-based heterogeneous catalysts with desired functionalities.

Unraveling the formation of oxygen vacancies on the surface of transition metal-doped ceria utilizing artificial intelligence

Ceria has been extensively utilized in different fields, with surface oxygen vacancies playing a central role. However, versatile oxygen vacancy regulation is still in its infancy. In this work, we propose an effective strategy to manipulate the oxygen vacancy formation energy via transition metal doping by combining first-principles calculations and analytical learning. We elucidate the underlying mechanism driving the formation of oxygen vacancies using combined symbolic regression and data analytics techniques. The results show that the Fermi level of the system and the electronegativity of the dopants are the paramount parameters (features) influencing the formation of oxygen vacancies. These insights not only enhance our understanding of the oxygen vacancy formation mechanism in ceria-based materials to improve their functionality but also potentially lay the groundwork for future strategies in the rational design of other transition metal oxide-based catalysts.

M-Ge-Si thermolytic molecular precursors and models for germanium-doped transition metal sites on silica

The synthesis, thermolysis, and surface organometallic chemistry of thermolytic molecular precursors based on a new germanosilicate ligand platform, -OGe[OSi(OtBu)3]3, is described. Use of this ligand is demonstrated with preparation of complexes containing the first-row transition metals Cr, Mn, and Fe. The thermolysis and grafting behavior of the synthesized complexes, Fe{OGe[OSi(OtBu)3]3}2 (FeGe), Mn{OGe[OSi(OtBu)3]3}2(THF)2 (MnGe) and Cr{OGe[OSi(OtBu)3]3}2(THF)2 (CrGe), was evaluated using a combination of thermogravimetric analysis; nuclear magnetic resonance (NMR), ultraviolet-visible (UV-Vis), and electron paramagnetic resonance (EPR) spectroscopies; and single-crystal X-ray diffraction (XRD). Grafting of the precursors onto SBA-15 mesoporous silica and subsequent calcination in air led to substantial changes in transition metal coordination environments and oxidation states, the implications of which are discussed in the context of low-coordinate and low oxidation state thermolytic molecular precursors.

Advanced Biological Applications of Cerium Oxide Nanozymes in Disease Related to Oxidative Damage

Due to their excellent catalytic activities, cerium oxide nanoparticles have promise as biological nanoenzymes. A redox reaction occurs between Ce3+ ions and Ce4+ ions during which they undergo conversion by acquiring or losing electrons as well as forming oxygen vacancies (or defects) in the lattice structure, which can act as antioxidant enzymes and simulate various enzyme activities. A number of cerium oxide nanoparticles have been engineered with multienzyme activities, including catalase, superoxide oxidase, peroxidase, and oxidase mimetic properties. Cerium oxide nanoparticles have nitric oxide radical clearing and radical scavenging properties and have been widely used in a number of fields of biology, including biomedicine, disease diagnosis, and treatment. This review provides a comprehensive introduction to the catalytic mechanisms and multiple enzyme activities of cerium oxide nanoparticles, along with their potential applications in the treatment of diseases of the brain, bones, nerves, and blood vessels.

Rare earth oxide based electrocatalysts: synthesis, properties and applications

As an important strategic resource, rare earths (REs) constitute 17 elements in the periodic table, namely 15 lanthanides (Ln) (La-Lu, atomic numbers from 57 to 71), scandium (Sc, atomic number 21) and yttrium (Y, atomic number 39). In the field of catalysis, the localization and incomplete filling of 4f electrons endow REs with unique physical and chemical properties, including rich electronic energy level structures, variable coordination numbers, etc., making them have great potential in electrocatalysis. Among various RE catalytic materials, rare earth oxide (REO)-based electrocatalysts exhibit excellent performances in electrocatalytic reactions due to their simple preparation process and strong structural variability. At the same time, the electronic orbital structure of REs exhibits excellent electron transfer ability, which can reduce the band gap and energy barrier values of rate-determining steps, further accelerating the electron transfer in the electrocatalytic reaction process; however, there is a lack of systematic review of recent advances in REO-based electrocatalysis. This review systematically summarizes the synthesis, properties and applications of REO-based nanocatalysts and discusses their applications in electrocatalysis in detail. It includes the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), hydrogen oxidation reaction (HOR), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), methanol oxidation reaction (MOR), nitrogen reduction reaction (NRR) and other electrocatalytic reactions and further discusses the catalytic mechanism of REs in the above reactions. This review provides a timely and comprehensive summary of the current progress in the application of RE-based nanomaterials in electrocatalytic reactions and provides reasonable prospects for future electrocatalytic applications of REO-based materials.

Polydopamine on Copper-Doped Cerium Dioxide Nanosheets as Peroxidase Mimics for the Intelligent Detection of Cholesterol

The catalytic ability of nanozymes has become an enzymology hotspot in the field of application. Most nanozymes were characterized to simultaneously have oxidase-like and peroxidase-like activities, but the practical application often focuses on certain activity; other complex activities may cause interference. The peroxidase-like activity (POD-like activity) of nanozymes have been widely used in the colorimetric detection of H2O2 or substances producing H2O2 as an intermediate, such as the detection of small biological molecules with the oxidative reaction of a chromogenic reagent in the presence of POD-like nanozymes. In this work, we used polydopamine (PDA) as the surface coating of Cu-CeO2 nanosheets (PDA@ Cu-CeO2), which enhanced peroxidase-like activity while inhibiting their oxidase-like activity, providing a feasible method for the sensitive determination of cholesterol by integrating visual colorimetric detection and a smartphone application as a readout. The absorbance intensity and RGB values displayed a linear range on cholesterol from 0.05 to 1.2 mM with the LOD (limit of detection) of 42.7 and 99.4 μM. In addition, the method is expected to apply in detecting cholesterol in human serum with acceptable accuracy.

Controlled synthesis of M doped NiVS (M = Co, Ce and Cr) as a robust electrocatalyst for urea electrolysis

Urea electrolysis can be used to treat wastewater containing urea and alleviate the energy crisis, so it is one of the best ways to solve environmental and energy problems. This paper reports the synthesis of M doped NiVS (M = Co, Ce and Cr) composites by a simple hydrothermal process for the first time. What is noteworthy is that the Ce-NiVS material as a catalytic electrode requires only 141 mV overpotential for the hydrogen evolution reaction (HER) and 1.291 V potential for the urea oxidation reaction (UOR) at a current density of 10 mA cm-2 in 1.0 M KOH and 0.5 M urea mixed alkaline solution. Using Ce-NiVS/NF as both the anode and cathode for urea electrolysis, a current density of 10 mA cm-2 is driven by a voltage of only 1.55 V, which is better than most previous catalysts. Experimental results demonstrate that the excellent catalytic activity of Ce-NiVS materials is due to the formation of a large number of active sites and the improvement of conductivity due to doping with Ce. Density functional theory calculation shows that the VS4 material has a small Gibbs free energy of hydrogen adsorption, which plays a major role in the hydrogen production process, and Ce-NiS has a higher density of states (DOS) near the Fermi level, indicating that Ce-NiS has better electronic conductivity. The synergistic catalysis of VS4 and Ce-NiS promoted the hydrogen production performance of the Ce-NiVS material. This work provides guidance for the optimization and design of low-cost electrocatalysts to replace expensive precious metal-based electrocatalysts for overall urea electrolysis.

Enhanced Oxygen Storage Capacity of Porous CeO2 by Rare Earth Doping

CeO2 is an important rare earth (RE) oxide and has served as a typical oxygen storage material in practical applications. In the present study, the oxygen storage capacity (OSC) of CeO2 was enhanced by doping with other rare earth ions (RE, RE = Yb, Y, Sm and La). A series of Undoped and RE-doped CeO2 with different doping levels were synthesized using a solvothermal method following a subsequent calcination process, in which just Ce(NO3)3∙6H2O, RE(NO3)3∙nH2O, ethylene glycol and water were used as raw materials. Surprisingly, the Undoped CeO2 was proved to be a porous material with a multilayered special morphology without any additional templates in this work. The lattice parameters of CeO2 were refined by the least-squares method with highly pure NaCl as the internal standard for peak position calibrations, and the solubility limits of RE ions into CeO2 were determined; the amounts of reducible-reoxidizable Cen+ ions were estimated by fitting the Ce 3d core-levels XPS spectra; the non-stoichiometric oxygen vacancy (VO) defects of CeO2 were analyzed qualitatively and quantitatively by O 1s XPS fitting and Raman scattering; and the OSC was quantified by the amount of H2 consumption per gram of CeO2 based on hydrogen temperature programmed reduction (H2-TPR) measurements. The maximum [OSC] of CeO2 appeared at 5 mol.% Yb-, 4 mol.% Y-, 4 mol.% Sm- and 7 mol.% La-doping with the values of 0.444, 0.387, 0.352 and 0.380 mmol H2/g by an increase of 93.04, 68.26, 53.04 and 65.22%. Moreover, the dominant factor for promoting the OSC of RE-doped CeO2 was analyzed.

Novel Mesoporous and Multilayered Yb/N-Co-Doped CeO2 with Enhanced Oxygen Storage Capacity

A cubic fluorite-type CeO2 with mesoporous multilayered morphology was synthesized by the solvothermal method followed by calcination in air, and its oxygen storage capacity (OSC) was quantified by the amount of O2 consumption per gram of CeO2 based on hydrogen temperature programmed reduction (H2-TPR) measurements. Doping CeO2 with ytterbium (Yb) and nitrogen (N) ions proved to be an effective route to improving its OSC in this work. The OSC of undoped CeO2 was 0.115 mmol O2/g and reached as high as 0.222 mmol O2/g upon the addition of 5 mol.% Yb(NO3)3∙5H2O, further enhanced to 0.274 mmol O2/g with the introduction of 20 mol.% triethanolamine. Both the introductions of Yb cations and N anions into the CeO2 lattice were conducive to the formation of more non-stoichiometric oxygen vacancy (VO) defects and reducible-reoxidizable Cen+ ions. To determine the structure performance relationships, the partial least squares method was employed to construct two linear functions for the doping level vs. lattice parameter and [VO] vs. OSC/SBET.

Bimetallic AuPt alloy/rod-like CeO2 nanojunctions with high peroxidase-like activity for colorimetric sensing of organophosphorus pesticides

Organophosphorus pesticides (OP) have extensive applications in agriculture, while their overuse causes inevitable residues in food, soil, and water, ultimately being harmful to human health and even causing diverse dysfunctions. Herein, a novel colorimetric platform was established for quantitative determination of malathion based on peroxidase mimic AuPt alloy decorated on CeO₂ nanorods (CeO₂@AuPt NRs). The synthesized nanozyme oxidized colorless 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of H₂O₂. Besides, the oxidized TMB was inversely reduced by ascorbic acid (AA), which were originated from hydrolysis of L-ascorbic acid-2-phosphate (AA2P) with the assistance of acid phosphatase (ACP). Based upon this observation ACP analysis was explored by colorimetry, showing a wid linear range of 0.2 ~ 3.5 U L^-1 and a low limit of detection (LOD = 0.085 U L^-1, S/N = 3). Furthermore, malathion present in the colorimetric system inhibited the activity of ACP and simultaneously affected the generation of AA, in turn promoting the recovery of the chromogenic reaction. Based on this, the LOD was decreased to 1.5 nM (S/N = 3) for the assay of malathion with a wide linear range of 6 ~ 100 nM. This simple colorimetric platform provides some informative guidelines for determination of other pesticides and disease markers.

Phase-Transition-Driven Regional Distribution of Rare-Earth Ions for Multiplexed Upconversion Emissions

Phase transition of the polymorphs is critical for controlled synthesis and property modulation of functional materials. Upconversion emissions from an efficient hexagonal sodium rare-earth (RE) fluoride compound, β-NaREF₄, which is generally obtained from the phase transition of the cubic (α-) phase counterpart, are attractive for photonic applications. However, the investigation of the α → β phase transition of NaREF₄ and its effect on the composition and architecture is still preliminary. Herein, we investigated the phase transition with two kinds of α-NaREF₄ particles. Instead of a uniform composition, the β-NaREF₄ microcrystals exhibited regionally distributed RE³⁺ ions, in which the RE³⁺ with a smaller ionic radius (smaller RE³⁺) sandwiched the RE³⁺ with a larger ionic radius (larger RE³⁺). We unravel that the α-NaREF₄ particles transformed to β-NaREF₄ nuclei with no controversial dissolution, and the α → β phase transition toward NaREF₄ microcrystals included nucleation and growth steps. The component-dependent phase transition is corroborated with RE³⁺ ions from Ho³⁺ to Lu³⁺ and multiple sandwiched microcrystals were obtained, in which up to five kinds of RE components were distributed regionally. Moreover, with rational integration of luminescent RE³⁺ ions, a single particle with multiplexed upconversion emissions in wavelength and lifetime domains is demonstrated, which provides a unique platform for optical multiplexing applications.

Expediting Toluene Combustion by Harmonizing the Ce-O Strength over Co-Doped CeZr Oxide Catalysts

Low-temperature catalytic degradation of volatile organic compounds (VOCs) by enhancing the activity of non-precious metal catalysts has always been the focus of attention. The mineralization of aromatic VOCs requires the participation of a large number of oxygen atoms, so the activation of oxygen species is crucial in the degradation reaction. Herein, we originally adjust the Ce-O bond strength in CeZr oxide catalysts by cobalt doping to promote the activation of oxygen species, thus improving the toluene degradation performance while maintaining high stability. Subsequent characterizations and theoretical calculations demonstrate that the weakening of the Ce-O bond strength increases the oxygen vacancy content, promotes the activation of oxygen species, and enhances the redox ability of the catalysts. This strategy also promotes the activation of toluene and accelerates the depletion of intermediate species. This study will contribute a strategy to enhance the activation ability of oxygen species in non-noble metal oxide catalysts, thereby enhancing the degradation performance of VOCs.

Structural Framework-Guided Universal Design of High-Entropy Compounds for Efficient Energy Catalysis

High-entropy compounds with extraordinary properties due to the synergistic effect of multiple components have exhibited great potential and attracted extensive attention in various fields, including physics, mechanical property analysis, and energy storage. Achieving universal stability and synthesis of high-entropy compounds with a wide range of components and structures continues to be difficult due to the high complexity of multicomponent mixing. Here, we propose a design strategy with high generality for realizing the stability and synthesis of high-entropy compounds that one metal site like the framework in the compound structures with bimetallic sites stabilizes another site to accommodate different elements. Several typical metal compounds with bimetallic sites, including perovskite hydroxides, layered double hydroxide, spinel sulfide, perovskite fluoride, and spinel oxides, have been synthesized into high-entropy compounds. High-entropy perovskite hydroxides (HEPHs) as representative compounds have been synthesized with a highly wide range of components even a septenary component and exhibit great oxygen evolution activity. Our work provides a design platform to develop more high-entropy compound systems with promising development potential for electrocatalysts.

Enhanced CO oxidation with cobalt-impregnated porous single-crystal manganese oxides

In this work, Mn2O3, Mn3O4 and MnO single crystals are prepared by using MnCO3 as the precursor. In addition, Co element is loaded on the three manganese oxide single crystals for the CO oxidation reaction.

Oxygen vacancy and valence engineering in CeO2 through distinct sized ion doping and their impact on oxygen reduction reaction catalysis

Defect tuning in ceria to enhance its catalytic properties is a subject of great interest for the scientific community owing to the growing demand for catalytic materials in drug, automobile and chemical industries. Doping induced defect engineering was found to be one of the most sought out strategies particularly in oxides for achieving multifunctionality. Here, in this study, we have doped ceria with distinct sized trivalent rare-earth ions, namely, Y³⁺, Eu³⁺ and La³⁺, using combustion techniques. Positron annihilation lifetime spectroscopy (PALS) suggested enhanced defect density with doping in general and higher concentration of oxygen vacancies in La³⁺ doped ceria compared to Y³⁺ and Eu³⁺ counterparts. X-ray photoelectron spectroscopy (XPS) suggested the existence of both Ce³⁺ and Ce⁴⁺, with the former having higher fraction in CeO₂:La³⁺ compared to CeO₂:Y³⁺. The electron transfer resistance (R_ct) reduced in all the doped samples when compared to undoped ceria and they demonstrated improved catalytic activity towards the oxygen reduction reaction (ORR). The highest reduction in R_ct was seen in the 5% La doped sample owing to the very high concentration of oxygen vacancies and Ce³⁺/Ce⁴⁺ ratio and CeO₂:5.0% La³⁺ showed the best performance towards ORR electrocatalysis. The studies are expected to help in further tuning the catalysts in terms of dopant concentrations, and in future work, the strategy will be to control the Ce³⁺/Ce⁴⁺ ratio and see its implication in both catalytic and magnetic applications.

Construction of an aflatoxin aptamer sensor based on a DNA nanoprism structure

Aflatoxin B1 (AFB1) is a group of heterocyclic aromatic hydrocarbon secondary metabolites, which are the most toxic among the known fungal toxins. Therefore, it becomes particularly important to develop sensitive, accurate, rapid and simple methods for the detection of AFB1. In this work, a method of constructing aflatoxin aptasensor with black phosphorus nano sheet loaded with gold nanoparticles as electrode modification material, Ce-metal organic framework (MOF) material as signal label and prism DNA nano structure modified electrode as recognition interface is proposed. The hybridization between prism DNA and primer probe was used to trigger rolling circle amplification (RCA) on the electrode surface, and then the complementary chain modified with Au NPs@Ce-MOF is bound to the amplification chain to provide electrochemical signals. In the range of 0.024-100 ng mL-1, the response current showed a good linear relationship with the logarithm of aflatoxin concentration, the linear equation was I = 6.4181 lg c + 11.975 with the linear correlation coefficient of 0.9973, and the detection limit was 1.48 pg mL-1 (S/N = 3).

Leveraging Pt/Ce1-xLaxO2-δ To Elucidate Interfacial Oxygen Vacancy Active Sites for Aerobic Oxidation of 5-Hydroxymethylfurfural

The interfacial oxygen-defective sites of oxide-supported metal catalysts are generally regarded as active centers in diverse redox reactions. Identification of their structure-property relationship at the atomic scale is of great importance but challenging. Herein, a series of La³⁺-doped three-dimensionally ordered macroporous CeO₂ (3D-Ce_1-xLa_xO_2-δ) were synthesized and applied as supports for Pt nanoparticles. The pieces of evidence from a suite of in-situ/ex-situ characterizations and theoretical calculations revealed that the La³⁺-mono-substituted La-□(-Ce)₂ sites (where □ represents an oxygen vacancy) exhibited superior charge transfer ability, behaving as trapping centers for Pt nanoparticles. The resulting interfacial Pt^δ+/La-□(-Ce)₂ sites served as the reversible active species in the aerobic oxidation of 5-hydroxymethylfurfural to boost catalytic performance by simultaneously promoting oxygen activated capacity and the cleavage of O-H/C-H bonds of adsorbed hydroxymethyl groups. Consequently, the Pt/3D-Ce_0.9La_0.1O_2-δ catalyst possessing the highest number of Pt^δ+/La-□(-Ce)₂ sites showed the best catalytic performance with 99.6% yield to 2,5-furandicarboxylic acid in 10 h. These results offer more insights into the promoting mechanism of interfacial oxygen-defective sites for the liquid-phase aerobic oxidation of aldehydes and alcohols.

Green Route Synthesis and Characterization Techniques of Silver Nanoparticles and Their Biological Adeptness

The development of the most reliable and green techniques for nanoparticle synthesis is an emerging step in the area of green nanotechnology. Many conventional approaches used for nanoparticle (NP) synthesis are expensive, deadly, and nonenvironmental. In this new era of nanotechnology, to overcome such concerns, natural sources which work as capping and reducing agents, including bacteria, fungi, biopolymers, and plants, are suitable candidates for synthesizing AgNPs. The surface morphology and applications of AgNPs are significantly pretentious to the experimental conditions by which they are synthesized. Available scattered information on the synthesis of AgNPs comprises the influence of altered constraints and characterization methods such as FTIR, UV-vis, DLS, SEM, TEM, XRD, EDX, etc. and their properties and applications. This review focuses on all the above-mentioned natural sources that have been used for AgNP synthesis recently. The green routes to synthesize AgNPs have established effective applications in various areas, including biosensors, magnetic resonance imaging (MRI), cancer treatment, surface-enhanced Raman spectroscopy (SERS), antimicrobial agents, drug delivery, gene therapy, DNA analysis, etc. The existing boundaries and prospects for metal nanoparticle synthesis by the green route are also discussed herein.

The preparation of ultrastable Al3+ doped CeO2 supported Au catalysts: Strong metal-support interaction for superior catalytic activity towards CO oxidation

The classical strong metal-support interaction (SMSI) plays a key role in improving thermal stability for supported Au catalysts. However, it always decreases the catalytic activity because of the encapsulation of Au species by support. Herein, we demonstrate that Al³⁺ is a functional additive which could effectively improve both catalytic activity and sintering resistant property for H₂ pretreated Al³⁺ doped CeO₂ supported Au (AuCeAl) catalyst at high temperature. The physical characterization and in-situ DRIFTS results provide insight that more oxygen vacancies generated by Al³⁺ doping could be as preferential adsorption sites for CO molecules when the encapsulation of Au species occurred, which is certificated by an accelerated formation of bicarbonate species. In the meantime, smaller Au nanoparticles with higher dispersion (2.8 nm, 85.63%) is achieved in AuCeAl catalysts, compared with that in CeO₂ supported Au (AuCe) catalysts (5.1 nm, 36.17%). Additionally, the as-prepared AuCeAl catalysts also have superior catalytic performance even after calcination at 800 °C in air.

Improving the valence self-reversible conversion of cerium nanoparticles on titanium implants by lanthanum doping to enhance ROS elimination and osteogenesis

Equipped with anti-oxidative properties, cerium oxide nanoparticles (CNPs) are gradually being adopted over the years in the field of oxidative stress research. However, the effects of CNPs may be diminished when under the influence of prolonged and substantially elevated levels of oxidative stress. Therefore, it is imperative to enhance the efficacy of CNPs to resist oxidative stress. In this study, our approach involves the fabrication of titanium surface CNPs coatings doped with different concentrations of lanthanum ions (La³⁺) and the investigation of their local anti-oxidative stress potential. The physicochemical characterization showed that the La-CNPs groups had a substantial increase in the generation of oxygen vacancies within the CNPs structure with the increase of La doping concentration. In vitro findings proofed that the cytocompatibility of different La-CNPs coatings showed a trend of increasing first and then decreasing with the increase of La doping concentration under oxidative stress microenvironment. Among these groups, the 30 % La-CNPs group presented the best cell proliferation and osteogenic differentiation which could activate the FoxO1 pathway, then upregulated the expression of SOD1 and CAT, and finally resulted in the inhibition of ROS production. In vivo results further confirmed that the 30 % La-CNPs group showed significant osteogenic effects in two rat models (osteoporosis and diabetes models). In conclusion, we believe that the 30 % La-CNPs coating holds promising potential for its implant applications in patients with oxidative stress-related diseases.

Recent advances in hydrothermal synthesis of facet-controlled CeO2-based nanomaterials

CeO₂-based nanomaterials have received tremendous attention due to their variety of applications. This paper is focused on the recent advances in facet-controlled CeO₂-based nanomaterials by the hydrothermal method. CeO₂-based nanomaterials with controllable size and exposed facets can be prepared by adjusting the reaction parameters. Moreover, doping and loading metals can improve the oxygen storage capacity (OSC) of CeO₂ and its catalytic activity. Various research studies on catalytic applications such as CO oxidation, water-gas shift reaction (WGSR), decomposition of hydrocarbons, and photocatalytic reaction have been carried out to exhibit the high potential of facet-controlled CeO₂ nanomaterials. This review will provide readers with various ideas for facet-controlled CeO₂-based nanomaterials.

The lanthanide doping effect on toluene catalytic oxidation over Pt/CeO2 catalyst

The present work was undertaken to know the lanthanide doping effect on the physicochemical properties of Pt/CeO₂ catalysts and their catalytic activity for toluene oxidation. A series of lanthanide ions (La, Pr, Nd, Sm and Gd) were incorporated into ceria lattice by hydrothermal method, and the Pt nanoparticles with equal quality were successfully loaded on various ceria-based supports. Their catalytic performance toward toluene oxidation shows a remarkable lanthanide-doping effect, and the activity is much dependent on the ion radius and valence state of dopants. Owing to smaller ion radius and low valence state, the dopant of Gd would form more Gd-Ce complex and less GdO₈-type complex, generating more oxygen vacancies and then promoting oxygen replenishment. Furthermore, the high concentration of oxygen vacancy would drive electrons to transfer from support to metal, and thus electron-rich and under-coordinated Pt particles that are favorable for toluene adsorption and dissociation are obtained. Attributing to above positive factors, the doping of Gd would effectively enhance the catalytic oxidation of toluene over Pt/CeO₂ catalyst. In addition, the Pt/CeGdO₂ sample exhibits an excellent reaction stability and resistance of concentration impact.

Enhanced Catalytic Activity Induced by the Nanostructuring Effect in Pd Decoration onto Doped Ceria Enabling an Origami Paper Analytical Device for High Performance of Amyloid-β Bioassay

In this work, we fabricated a novel origami paper-based analytical device (oPAD) assisted by the nanostructuring effect of in situ Pd decoration of Cu/Co-doped CeO₂ (CuCo-CeO₂-Pd) nanospheres, functionalized with their strongly enhanced electrocatalytic properties to realize an electrochemical and visual signal readout system in oPAD, for highly sensitive detection of amyloid-β (Aβ). The CuCo-CeO₂-Pd nanospheres were introduced as an enhanced "signal transducer layer" on account of the electron transfer acceleration caused by catalyzing glucose to produce H₂O₂ for differential pulse voltammetry signal readout and further 3,3'5,5'-tetramethylbenzidine (TMB) oxidation for colorimetric analysis. Meanwhile, for achieving superior performance of the proposed oPAD, in situ growth of urchin-like gold nanoparticles (Au NPs) onto cellulose fibers was adopted to improve "the recognition layer" in favor of immobilizing antibodies for targeting Aβ through specific antigen-antibody interactions. Combined with the delicate design of oPAD, exhibiting actuation of the conversion procedure between hydrophobicity and hydrophilicity on paper tabs in the assay process, the oPAD successfully enabled sensitive diagnosis of Aβ in a linear range from 1.0 pM to 100 nM with a limit of detection of 0.05 pM (S/N = 3) for electrochemical detection, providing a reliable strategy for quantifying the Aβ protein in clinical applications.

Bioinspired Synthesis of Ce1-x O2:x%Cu2+ Nanobelts for CO Oxidation and Organic Dye Degradation

Ce_1-x O₂:x%Cu²⁺ nanobelts were bioinspired, designed, and fabricated using commercial filter papers as scaffolds by adding Cu(NO₃)₂ in the original sol solution of CeO₂ nanobelts, which display excellent catalyst properties for CO oxidation and photocatalytic activity for organic dyes. Compared with pure CeO₂, CuO belts were synthesized using the same method and the corresponding Ce_0.5O₂:50%Cu²⁺ bulk materials were synthesized without filter paper as scaffolds; the synthesized Ce_1-x O₂:x%Cu²⁺ nanobelts, especially Ce_0.5O₂:50%Cu²⁺ nanobelts, can decrease the reaction temperature of CO to CO₂ at 100 °C with the conversion rate of 100%, much lower than the formerly reported kinds of Ce_1-x O₂:x%Cu²⁺ catalysts. Meanwhile, the synthesized Ce_1-x O₂:x%Cu²⁺ nanobelts also display better photocatalytic activity for organic dyes. All of these results provide useful information for the potential applications of the synthesized Ce_1-x O₂:x%Cu²⁺ nanobelts in catalyst fields.

Effect of Pr in CO2 Methanation Ru/CeO2 Catalysts

CO2 methanation has been studied with Pr-doped Ru/CeO2 catalysts, and a dual effect of Pr has been observed. For low Pr content (i.e., 3 wt %) a positive effect in oxygen mobility prevails, while for high Pr doping (i.e., 25 wt %) a negative effect in the Ru-CeO2 interaction is more relevant. Isotopic experiments evidenced that Pr hinders the dissociation of CO2, which takes place at the Ru-CeO2 interface. However, once the temperature is high enough (200 °C), Pr improves the oxygen mobility in the CeO2 support, and this enhances CO2 dissociation because the oxygen atoms left are delivered faster to the support sink and the dissociation sites at the interface are cleaned up faster. In situ Raman spectroscopy experiments confirmed that Pr improves the creation of oxygen vacancies on the ceria lattice but hinders their reoxidation by CO2, and both opposite effects reach an optimum balance for 3 wt % Pr doping. In addition, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments showed that Pr doping, regardless of the amount, decreases the population of surface carbon species created on the catalysts surface upon CO2 chemisorption under methanation reaction conditions, affecting both productive reaction intermediates (formates and carbonyls) and unproductive carbonates.

Solvothermal Synthesis Routes to Substituted Cerium Dioxide Materials

We review the solution-based synthesis routes to cerium oxide materials where one or more elements are included in place of a proportion of the cerium, i.e., substitution of cerium is performed. The focus is on the solvothermal method, where reagents are heated above the boiling point of the solvent to induce crystallisation directly from the solution. This yields unusual compositions with crystal morphology often on the nanoscale. Chemical elements from all parts of the periodic table are considered, from transition metals to main group elements and the rare earths, including isovalent and aliovalent cations, and surveyed using the literature published in the past ten years. We illustrate the versatility of this synthesis method to allow the formation of functional materials with applications in contemporary applications such as heterogeneous catalysis, electrodes for solid oxide fuel cells, photocatalysis, luminescence and biomedicine. We pick out emerging trends towards control of crystal habit by use of non-aqueous solvents and solution additives and identify challenges still remaining, including in detailed structural characterisation, the understanding of crystallisation mechanisms and the scale-up of synthesis.

Tunable Electronic Metal-Support Interactions on Ceria-Supported Noble-Metal Nanocatalysts in Controlling the Low-Temperature CO Oxidation Activity

A fundamental study on the metal-support interactions of supported metal catalysts is of great importance for developing heterogeneous catalysts with high performance, is still attracting and challenging in many heterogeneous catalytic reactions. In this work, we report the catalytic performances of CeO₂-supported noble-metal catalysts among single atoms, subnanoclusters (∼1 nm), and nanoparticles (2.2-2.7 nm) upon low-temperature CO oxidation reaction between 50 and 250 °C. The subnanoclusters and nanoparticles of Ru, Rh, and Ir showed much higher activities than those of the single atoms, while a Pd single-atom catalyst was more active than Pd subnanoclusters and nanoparticles. According to the results of multiple ex situ and in situ characterizations, the much different activities of Ru, Rh, Ir, and Pd were derived from the alterable electronic metal-support interactions (EMSI), which determine the concurrent reaction pathway including the famous Mars van Krevelen mechanism and carbonate-intermediate route on the most active metal sites of M^δ+ (0 < δ < 1) for Ru, Rh, and Ir and Pd²⁺ for Pd. Also, the moderate EMSI of CeO₂-supported Rh subnanoclusters furthest benefited activation of the adsorbed CO molecule and ensured it the highest activity among CeO₂-supported Ru, Rh, and Ir catalysts with similar metal deposit sizes.

Yb3+, Er3+ Codoped Cerium Oxide Upconversion Nanoparticles Enhanced the Enzymelike Catalytic Activity and Antioxidative Activity for Parkinson's Disease Treatment

Oxidative stress plays an important role in Parkinson's disease (PD) and is considered a therapeutic target for PD. However, most therapeutic antioxidants show limitations due to their low reactive oxygen species (ROS) catalytic properties and low crossing of blood-brain barrier. Herein, the antioxidative activity of Yb3+ and Er3+ double-doped CeO2-x (Yb/Er/CeO2-x) upconversion nanoparticles (UCNPs) is obtained for PD treatment. Doping of Yb3+ and Er3+ ions increases oxygen vacancies, which leads to higher enzymelike catalytic activities compared to CeO2-x nanoparticles alone. Tyrosine hydroxylase protein and glial fibrillary acidic protein expression in substantia nigra and striatum as well as the open-field activity test indicates that Yb/Er/CeO2-x is effective for treatment of PD. The activities of glutathione peroxidase and total antioxidant capacity increase and the production of ROS decreases with Yb/Er/CeO2-x UCNP treatment compared with MPTP-induced injury. This indicates that the mechanism of PD treatment is to catalyze ROS products. There have been no reports to date on the usage of Yb/Er/CeO2-x as an antioxidant for PD treatment. Yb/Er/CeO2-x UCNPs cross the blood-brain barrier and exhibit biocompatibility and antioxidant catalytic properties, which decrease the ROS and effectively help in treating PD.

Oxidative esterification of renewable furfural on cobalt dispersed on ordered porous nitrogen-doped carbon

A series of highly dispersed cobalt-based catalysts on N-doped ordered porous carbon (Co-NOPC) were synthesized using the sacrificial-template method. MCM-41, ZSM-5 and SBA-15 were employed as hard templates with 2,2'-bipyridine as the ligand. The physical and chemical properties of the Co-NOPC catalyst were characterized by Raman, XRD, SEM, TEM, EDX, ICP, BET, XPS. Co-NOPC had been proven to be a highly efficient catalyst for oxidative esterification of furfural (FUR) to methyl 2-furoate without alkaline additives. Catalytic performance was correlated to the dispersed cobalt, porous structure and specific surface area. The relationship between oxygen activation and the strong interaction of cobalt and pyridine nitrogen were confirmed by XPS. Catalytic performance enhancement mechanisms were correlated with the redistribution of electrons at the interface between carbon material and cobalt atoms through the molecular dynamics method and a reaction mechanism was also proposed. The optimized catalysts showed outstanding catalytic activity and stability and no obvious decrease in activity was found after 6 cycles with 99.6% FUR conversion and 96% methyl 2-furoate selectivity.

First-principles microkinetic simulations revealing the scaling relations and structure sensitivity of CO2 hydrogenation to C1 & C2 oxygenates on Pd surfaces

CO₂ hydrogenation to alcohols and other oxygenates on Pd(211) and Pd(111) surfaces was studied by microkinetic modelling. Energy scaling relations on two surfaces were established. Activity plots as a function of reaction conditions were identified.

Selective Hydrogenation on a Highly Active Single-Atom Catalyst of Palladium Dispersed on Ceria Nanorods by Defect Engineering

Single-atom catalysis represents a new frontier that integrates the merits of homogeneous and heterogeneous catalysis to afford exceptional atom efficiency, activity, and selectivity for a range of catalytic systems. Herein we describe a simple defect engineering strategy to construct an atomically dispersed palladium catalyst (Pd^δ+, 0 < δ < 2) by anchoring the palladium atoms on oxygen vacancies created in CeO₂ nanorods. This was confirmed by spherical aberration correction electron microscopy and extended X-ray absorption fine structure measurement. The as-prepared catalyst showed exceptional catalytic performance in the hydrogenation of styrene (99% conversion, TOF of 2410 h^-1), cinnamaldehyde (99% conversion, 99% selectivity, TOF of 968 h^-1), as well as oxidation of triethoxysilane (99% conversion, 79 selectivity, TOF of 10 000 h^-1). This single-atom palladium catalyst can be reused at least five times with negligible activity decay. The palladium atoms retained their dispersion on the support at the atomic level after thermal stability testing in Ar at 773 K. Most importantly, this synthetic method can be scaled up while maintaining catalytic performance. We anticipate that this method will expedite access to single-atom catalysts with high activity and excellent resistance to sintering, significantly impacting the performance of this class of catalysts.

Chirality Pure Carbon Nanotubes: Growth, Sorting, and Characterization

Single-walled carbon nanotubes (SWCNTs) have been attracting tremendous attention owing to their structure (chirality) dependent outstanding properties, which endow them with great potential in a wide range of applications. The preparation of chirality-pure SWCNTs is not only a great scientific challenge but also a crucial requirement for many high-end applications. As such, research activities in this area over the last two decades have been very extensive. In this review, we summarize recent achievements and accumulated knowledge thus far and discuss future developments and remaining challenges from three aspects: controlled growth, postsynthesis sorting, and characterization techniques. In the growth part, we focus on the mechanism of chirality-controlled growth and catalyst design. In the sorting part, we organize and analyze existing literature based on sorting targets rather than methods. Since chirality assignment and quantification is essential in the study of selective preparation, we also include in the last part a comprehensive description and discussion of characterization techniques for SWCNTs. It is our view that even though progress made in this area is impressive, more efforts are still needed to develop both methodologies for preparing ultrapure (e.g., >99.99%) SWCNTs in large quantity and nondestructive fast characterization techniques with high spatial resolution for various nanotube samples.

CeO2 facets control: from single (100) to multiple

Three different facets of CeO₂ films with distinctive morphologies could be synthesized and tuned on a SrTiO₃ substrate by pulsed laser deposition.

Engineering well-defined rare earth oxide-based nanostructures for catalyzing C1 chemical reactions

In this review, we summarize the nanostructural engineering and applications of rare earth oxide-based nanomaterials with well-defined compositions, crystal phases and shapes for efficiently catalyzing C1 chemical reactions.

Asymmetric Oxygen Vacancies: the Intrinsic Redox Active Sites in Metal Oxide Catalysts

To identify the intrinsic active sites in oxides or oxide supported catalysts is a research frontier in the fields of heterogeneous catalysis and material science. In particular, the role of oxygen vacancies on the redox properties of oxide catalysts is still not fully understood. Herein, some relevant research dealing with M1-O-M2 or M1-□-M2 linkages as active sites in mixed oxides, in oxide supported single-atom catalysts, and at metal/oxide interfaces of oxide supported nanometal catalysts for various reaction systems is reviewed. It is found that the catalytic activity of these oxides not only depends on the amounts of oxygen vacancies and metastable cations but also shows a significant influence from the local environment of the active sites, in particular, the symmetry of the oxygen vacancies. Based on the recent progress in the relevant fields, an "asymmetric oxygen vacancy site" is introduced, which indicates an oxygen vacancy with an asymmetric coordination of cations, making oxygen "easy come, easy go," i.e., more reactive in redox reactions. The establishment of this new mechanism would shed light on the future investigation of the intrinsic active sites in oxide and oxide supported catalysts.

Investigation of 4f-Related Electronic Transitions of Rare-Earth Doped ZnO Luminescent Materials: Insights from First-Principles Calculations

Rare-earth (RE) doped zinc oxides (ZnO) are regarded as promising materials for application in versatile color-tuned devices. However, the understanding of underlying luminescence mechanism and the rule of 4 f-related electronic transition is still limited, which is full of significance for the exploration of advanced RE-based ZnO phosphors. Thus, a series of ZnO : RE (RE=Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Yb) phosphors have been investigated by means of first-principles calculations. Meanwhile, we also consider the effect of native defects (V_O , V_Zn ) on the luminescence of ZnO : RE phosphors. Accordingly, four types of electric-dipole allowed transition processes are figured out in ZnO : RE family. Additionally, we manifest that the V_O can further improve the luminescent performance of ZnO : RE phosphors, and give insightful guidance to design desired RE-based ZnO materials with excellent luminescence.