Minimal proton channel enables H2 oxidation and production with a water-soluble nickel-based catalyst

Bioinspired Diiron Complex with Proton Shuttling and Redox-Active Ligand for Electrocatalytic Hydrogen Evolution

A μ-oxo diiron complex, featuring the pyridine-2,6-dicarboxamide-based thiazoline-derived redox-active ligand, H2L (H2L = N2,N6-bis(4,5-dihydrothiazol-2-yl)pyridine-2,6-dicarboxamide), was synthesized and thoroughly characterized. [FeIII-(μ-O)-FeIII] showed electrocatalytic hydrogen evolution reaction activity in the presence of different organic acids of varying pKa values in dimethylformamide. Through electrochemical analysis, we found that [FeIII-(μ-O)-FeIII] is a precatalyst that undergoes concerted two-electron reduction to generate an active catalyst. Fourier transform infrared spectrum of reduced species and density functional theory (DFT) investigation indicate that the active catalyst contains a bridged hydroxo unit which serves as a local proton source for the Fe(III) hydride intermediate to release H2. We propose that in this active catalyst, the thiazolinium moiety acts as a proton-transferring group. Additionally, under sufficiently strong acidic conditions, bridged oxygen gets protonated before two-electron reduction. In the presence of exogenous acids of varying strengths, it displays electro-assisted catalytic response at a distinct applied potential. Stepwise electron-transfer and protonation reactions on the metal center and the ligand were studied through DFT to understand the thermodynamically favorable pathways. An ECEC or EECC mechanism is proposed depending on the acid strength and applied potential.

Synergy of {Co(H2O)6}2+ with a Polyoxometalate Leads to Aqueous Homogeneous Hydrogen Evolution: Experiments and Computations

In this work, we have described a polyoxometalate (POM)-based inexpensive and easily synthesizable compound [Co(H2O)6]2[{K(H2O)}2V10O28]·2H2O (1), which exhibits electrocatalytic hydrogen evolution in its aqueous solution without its decomposition (or electrodeposition), acting as a rare homogeneous electrocatalyst. Even though the compound [Co(H2O)6]2[{K(H2O)}2V10O28]·2H2O (1) (soluble in water) shows electrocatalytic hydrogen evolution reaction (HER) activity because of the Coulombic attraction, including H-bonding interactions, between the [Co(H2O)6]2+ cationic species and [{K(H2O)}2V10O28]4-anionic species, the individual homogeneous solutions of [V10O28]6- (source: Na6[V10O28]·18H2O) and [Co(H2O)6]2+ (source: CoCl2·6H2O) do not show any electrocatalytic HER activity. We have thus established that the synergy of [V10O28]6- with [Co(H2O)6]2+ in crystal matrix as well as in the aqueous solution of 1 makes the compound 1 a stable and highly active electrocatalyst for homogeneous HER in an aqueous solution. In order to corroborate these homogeneous HER studies, we performed density functional theory (DFT) calculations to show that decavanadate cluster anion [V10O28]6- interacts with hexa-aqua complex cation [Co(H2O)6]2+ via strong H-bonding interactions, leading to a synergy effect that enables the cobalt center of [Co(H2O)6]2+ to be an active site of HER in the present work.

Dynamics and Coordination of a P2N2 Ligand - from Twisted Conformation to Chelation

Based on their general spacial flexibility, their Lewis and Brønsted basicity, and ability to mimic second sphere effects the 1,5-diaza-3,7-diphosphacyclooctane ligand family and their complexes have regained substantial scientific interest. It was now possible to structurally analyze a recently reported member of this family with p-tolyl and t-butyl substituents on P and N, respectively, (P2 p-tolN2 tBu). Notably, the ligand crystallizes with a 'twisted' backbone. This compound is the very first of its kind to have been unambiguously characterized with regard to its chemical and molecular structure as being in this conformation. A temperature-dependent NMR study provides insight into the molecular dynamics of two isomers in solution, which are most likely also both twisted, as judged by the observed limited reactivity. Despite the in principle unfavorable conformation of the free ligand, it was successfully chelated to tungsten and molybdenum centers in mononuclear carbonyl complexes. The ligand, a derivative thereof and four new complexes were comprehensively characterized and analyzed in comparison. This includes single crystal XRD molecular structures of P2 p-tolN2 tBu and all four complexes. P2 p-tolN2 tBu, regardless of its twisted conformation, is able to coordinate to metal centers given that enough energy (heat) for a conformational change is provided.

Hydrogen evolution catalysis by a cobalt porphyrin peptide: A proposed role for porphyrin propionic acid groups

Cobalt microperoxidase-11 (CoMP11-Ac) is a cobalt porphyrin-peptide catalyst for hydrogen (H2) evolution from water. Herein, we assess electrocatalytic activity of CoMP11-Ac from pH 1.0-10.0. This catalyst remains intact and active under highly acidic conditions (pH 1.0) that are desirable for maximizing H2 evolution activity. Analysis of electrochemical data indicate that H2 evolution takes place by two pH-dependent mechanisms. At pH < 4.3, a proton transfer mechanism involving the propionic acid groups of the porphyrin is proposed, decreasing the catalytic overpotential by 280 mV.

Deciphering Reversible Homogeneous Catalysis of the Electrochemical H2 Evolution and Oxidation: Role of Proton Relays and Local Concentration Effects

Nickel bisdiphosphine complexes bearing pendant amines form a unique series of catalysts (so-called DuBois' catalysts) capable of bidirectional/reversible electrocatalytic oxidation and production of dihydrogen. This unique behaviour is directly linked to the presence of proton relays installed close to the metal center. We report here for the arginine derivative [Ni(P2 Cy N2 Arg )2 ]6+ on a mechanistic model and its kinetic treatment that may apply to all DuBois' catalysts and show that it allows for a good fit of experimental data measured at different pH values, catalyst concentrations and partial hydrogen pressures. The bidirectionality of catalysis results from balanced equilibria related to hydrogen uptake/evolution on one side and (metal)-hydride installation/capture on the other side, both controlled by concentration effects resulting from the presence of proton relays and connected by two square schemes corresponding to proton-coupled electron transfer processes. We show that the catalytic bias is controlled by the kinetic of the H2 uptake/evolution step. Reversibility does not require that the energy landscape be flat, with redox transitions occurring at potentials up to 250 mV away for the equilibrium potential, although such large deviations from a flat energy landscape can negatively impacts the rate of catalysis when coupled with slow interfacial electron transfer kinetics.

Enzymatic and Bioinspired Systems for Hydrogen Production

The extraordinary potential of hydrogen as a clean and sustainable fuel has sparked the interest of the scientific community to find environmentally friendly methods for its production. Biological catalysts are the most attractive solution, as they usually operate under mild conditions and do not produce carbon-containing byproducts. Hydrogenases promote reversible proton reduction to hydrogen in a variety of anoxic bacteria and algae, displaying unparallel catalytic performances. Attempts to use these sophisticated enzymes in scalable hydrogen production have been hampered by limitations associated with their production and stability. Inspired by nature, significant efforts have been made in the development of artificial systems able to promote the hydrogen evolution reaction, via either electrochemical or light-driven catalysis. Starting from small-molecule coordination compounds, peptide- and protein-based architectures have been constructed around the catalytic center with the aim of reproducing hydrogenase function into robust, efficient, and cost-effective catalysts. In this review, we first provide an overview of the structural and functional properties of hydrogenases, along with their integration in devices for hydrogen and energy production. Then, we describe the most recent advances in the development of homogeneous hydrogen evolution catalysts envisioned to mimic hydrogenases.

Expanding the Horizon of Bio-Inspired Catalyst Design with Tactical Incorporation of Drug Molecules

The development of potent H₂ production catalysts is a key aspect in our journey toward the establishment of a sustainable carbon-neutral power infrastructure. Hydrogenase enzymes provide the blueprint for designing efficient catalysts by the rational combination of central metal core and protein scaffold-based outer coordination sphere (OCS). Traditionally, a biomimetic catalyst is crafted by including natural amino acids as OCS features around a synthetic metal motif to functionally imitate the metalloenzyme activity. Here, we have pursued an unconventional approach and implanted two distinct drug molecules (isoniazid and nicotine hydrazide) at the axial position of a cobalt core to create a new genre of synthetic catalysts. The resultant cobalt complexes are active for both electrocatalytic and photocatalytic H₂ production in near-neutral water, where they significantly enhance the catalytic performance of the unfunctionalized parent cobalt complex. The drug molecules showcased a dual effect as they influence the catalytic HER by improving the surrounding proton relay along and exerting subtle electronic effects. The isoniazid-ligated catalyst C1 outperformed the nicotine hydrazide-bound complex C2, as it produced H₂ from water (pH 6.0) at a rate of 3960 s^-1 while exhibiting Faradaic efficiency of about 90 %. This strategy opens up newer avenues of bio-inspired catalyst design beyond amino acid-based OCS features.

Bioinspired and biomolecular catalysts for energy conversion and storage

Metalloenzymes are remarkable for facilitating challenging redox transformations with high efficiency and selectivity. In the area of alternative energy, scientists aim to capture these properties in bioinspired and engineered biomolecular catalysts for the efficient and fast production of fuels from low-energy feedstocks such as water and carbon dioxide. In this short review, efforts to mimic biological catalysts for proton reduction and carbon dioxide reduction are highlighted. Two important recurring themes are the importance of the microenvironment of the catalyst active site and the key role of proton delivery to the active site in achieving desired reactivity. Perspectives on ongoing and future challenges are also provided.

Molecular Catalysts with Diphosphine Ligands Containing Pendant Amines

Pendant amines play an invaluable role in chemical reactivity, especially for molecular catalysts based on earth-abundant metals. As inspired by [FeFe]-hydrogenases, which contain a pendant amine positioned for cooperative bifunctionality, synthetic catalysts have been developed to emulate this multifunctionality through incorporation of a pendant amine in the second coordination sphere. Cyclic diphosphine ligands containing two amines serve as the basis for a class of catalysts that have been extensively studied and used to demonstrate the impact of a pendant base. These 1,5-diaza-3,7-diphosphacyclooctanes, now often referred to as "P₂N₂" ligands, have profound effects on the reactivity of many catalysts. The resulting [Ni(P^R₂N^R'₂)₂]²⁺ complexes are electrocatalysts for both the oxidation and production of H₂. Achieving the optimal benefit of the pendant amine requires that it has suitable basicity and is properly positioned relative to the metal center. In addition to the catalytic efficacy demonstrated with [Ni(P^R₂N^R'₂)₂]²⁺ complexes for the oxidation and production of H₂, catalysts with diphosphine ligands containing pendant amines have also been demonstrated for several metals for many different reactions, both in solution and immobilized on surfaces. The impact of pendant amines in catalyst design continues to expand.

Outer-coordination sphere in multi-H+/multi-e-molecular electrocatalysis

Electrocatalysis is an indispensable technique for small-molecule transformations, which are essential for the sustainability of society. Electrocatalysis utilizes electricity as an energy source for chemical reactions. Hydrogen is considered the “fuel for the future,” and designing electrocatalysts for hydrogen production has thus become critical. Furthermore, fuel cells are promising energy solutions that require robust electrocatalysts for key fuel cell reactions such as the interconversion of oxygen to water. Concerns regarding the rising concentration of atmospheric carbon dioxide have prompted the search for CO₂ conversion methods. One promising approach is the electrochemical conversion of CO₂ into commodity chemicals and/or liquid fuels, but such chemistry is highly energy demanding because of the thermodynamic stability of CO₂. All of the above-mentioned electrocatalytic processes rely on the selective input of multiple protons (H⁺) and electrons (e^–) to yield the desired products. Biological enzymes evolved in nature to perform such redox catalysis and have inspired the design of catalysts at the molecular and atomic levels. While it is synthetically challenging to mimic the exact biological environment, incorporating functional outer coordination spheres into molecular catalysts has shown promise for advancing multi-H⁺ and multi-e^– electrocatalysis. From this Perspective, herein, catalysts with outer coordination sphere(s) are selected as the inspiration for developing new catalysts, particularly for the reductive conversion of H⁺, O₂, and CO₂, which are highly relevant to sustainability. The recent progress in electrocatalysis and opportunities to explore beyond the second coordination sphere are also emphasized.

Group 6 transition metal-based molecular complexes for sustainable catalytic CO2 activation

CO2 activation is one of the key steps towards CO2 mitigation. In this context, the group 6 transition metal-based molecular catalysts can lead the way.

Introducing Water-Network-Assisted Proton Transfer for Boosted Electrocatalytic Hydrogen Evolution with Cobalt Corrole

Proton transfer is vital for many biological and chemical reactions. Hydrogen-bonded water-containing networks are often found in enzymes to assist proton transfer, but similar strategy has been rarely presented by synthetic catalysts. We herein report the Co corrole 1 with an appended crown ether unit and its boosted activity for the hydrogen evolution reaction (HER). Crystallographic and 1H NMR studies proved that the crown ether of 1 can grab water via hydrogen bonds. By using protic acids as proton sources, the HER activity of 1 was largely boosted with added water, while the activity of crown-ether-free analogues showed very small enhancement. Inhibition studies by adding (1) external 18-crown-6-ether to extract water molecules and (2) potassium ion or N-benzyl-n-butylamine to block the crown ether of 1 further confirmed its critical role in assisting proton transfer via grabbed water molecules. This work presents a synthetic example to boost HER through water-containing networks.

A protein scaffold enables hydrogen evolution for a Ni-bisdiphosphine complex

An artificial metalloenzyme acting as a functional biomimic of hydrogenase enzymes was activated by assembly via covalent attachment of the molecular complex, [Ni(PN^glycineP)₂]^2-, within a structured protein scaffold. Electrocatalytic H₂ production was observed from pH 3.0 to 10.0 for the artificial enzyme, while no electrocatalytic activity was observed for similar [Ni(PNP)₂]²⁺ systems.

Approaching Industrially Relevant Current Densities for Hydrogen Oxidation with a Bioinspired Molecular Catalytic Material

Integration of efficient platinum-group-metal (PGM)-free catalysts to fuel cells and electrolyzers is a prerequisite to their large-scale deployment. Here, we describe the development of a molecular-based anode for the hydrogen oxidation reaction (HOR) through noncovalent integration of a DuBois type Ni bioinspired molecular catalyst at the surface of a carbon nanotube modified gas diffusion layer. This mild immobilization strategy enabled us to gain high control over the loading in catalytic sites. Additionally, through the adjustment of the hydration level of the active layer, a new record current density of 214 ± 20 mA cm^-2 could be reached at 0.4 V vs RHE with the PGM-free anode, at 25 °C. Near industrially relevant current densities were obtained at 55 °C with 150 ± 20 and 395 ± 30 mA cm^-2 at 0.1 and 0.4 V overpotentials, respectively. These results further demonstrate the relevance of such molecular approaches for the development of electrocatalytic platforms for energy conversion.

Efficient homogeneous electrocatalytic hydrogen evolution using a Ni-containing polyoxometalate catalyst

NiCl₂·6H₂O ([Ni(H₂O)₆]₂Cl₂) per se does not show electrocatalytic hydrogen evolution reaction activity (HER) in an acidic aqueous medium as well as in neutral water. Interestingly, when [Ni(H₂O)₆]²⁺ is present in a polyoxovanadate matrix, for example, in the compound K₂[Ni(H₂O)₆]₂[V₁₀O₂₈]·4H₂O (1), it exhibits homogeneous electrocatalytic HER activity in an acidic aqueous solution with a turn over frequency of 2.1 s^-1 and an effective low overpotential of 127 mV at pH 2.3. Compound 1 is the first nickel-containing polyoxometalate catalyst for hydrogen production via homogeneous electrocatalytic proton reduction without its decomposition under electrochemical conditions of HER.

Reversible catalysis

We describe as 'reversible' a bidirectional catalyst that allows a reaction to proceed at a significant rate in response to even a small departure from equilibrium, resulting in fast and energy-efficient chemical transformation. Examining the relation between reaction rate and thermodynamic driving force is the basis of electrochemical investigations of redox reactions, which can be catalysed by metallic surfaces and biological or synthetic molecular catalysts. This relation has also been discussed in the context of biological energy transduction, regarding the function of biological molecular machines that harness chemical reactions to do mechanical work. This Perspective describes mean-field kinetic modelling of these three types of systems - surface catalysts, molecular catalysts of redox reactions and molecular machines - with the goal of unifying concepts in these different fields. We emphasize that reversibility should be distinguished from other figures of merit, such as rate or directionality, before its design principles can be identified and used to engineer synthetic catalysts.

Biochemical and artificial pathways for the reduction of carbon dioxide, nitrite and the competing proton reduction: effect of 2nd sphere interactions in catalysis

Reduction of oxides and oxoanions of carbon and nitrogen are of great contemporary importance as they are crucial for a sustainable environment.

Biosynthetic Approaches towards the Design of Artificial Hydrogen-Evolution Catalysts

Hydrogen is a clean and sustainable form of fuel that can minimize our heavy dependence on fossil fuels as the primary energy source. The need of finding greener ways to generate H₂ gas has ignited interest in the research community to synthesize catalysts that can produce H₂ by the reduction of H⁺ . The natural H₂ producing enzymes hydrogenases have served as an inspiration to produce catalytic metal centers akin to these native enzymes. In this article we describe recent advances in the design of a unique class of artificial hydrogen evolving catalysts that combine the features of the active site metal(s) surrounded by a polypeptide component. The examples of these biosynthetic catalysts discussed here include i) assemblies of synthetic cofactors with native proteins; ii) peptide-appended synthetic complexes; iii) substitution of native cofactors with non-native cofactors; iv) metal substitution from rubredoxin; and v) a reengineered Cu storage protein into a Ni binding protein. Aspects of key design considerations in the construction of these artificial biocatalysts and insights gained into their chemical reactivity are discussed.

Noncovalent Integration of a Bioinspired Ni Catalyst to Graphene Acid for Reversible Electrocatalytic Hydrogen Oxidation

Efficient heterogeneous catalysis of hydrogen oxidation reaction (HOR) by platinum group metal (PGM)-free catalysts in proton-exchange membrane (PEM) fuel cells represents a significant challenge toward the development of a sustainable hydrogen economy. Here, we show that graphene acid (GA) can be used as an electrode scaffold for the noncovalent immobilization of a bioinspired nickel bis-diphosphine HOR catalyst. The highly functionalized structure of this material and optimization of the electrode-catalyst assembly sets new benchmark electrocatalytic performances for heterogeneous molecular HOR, with current densities above 30 mA cm-2 at 0.4 V versus reversible hydrogen electrode in acidic aqueous conditions and at room temperature. This study also shows the great potential of GA for catalyst loading improvement and porosity management within nanostructured electrodes toward achieving high current densities with a noble-metal free molecular catalyst.

Using Surface Amide Couplings to Assemble Photocathodes for Solar Fuel Production Applications

A facile surface amide-coupling method was examined to attach dye and catalyst molecules to silatrane-decorated NiO electrodes. Using this method, electrodes with a push-pull dye were assembled and characterized by photoelectrochemistry and transient absorption spectroscopy. The dye-sensitized electrodes exhibited hole injection into NiO and good photoelectrochemical stability in water, highlighting the stability of the silatrane anchoring group and the amide linkage. The amide-coupling protocol was further applied to electrodes that contain a molecular proton reduction catalyst for use in photocathode architectures. Evidence for catalyst reduction was observed during photoelectrochemical measurements and via femtosecond-transient absorption spectroscopy demonstrating the possibility for application in photocathodes.

The good, the neutral, and the positive: buffer identity impacts CO2 reduction activity by nickel(ii) cyclam

Development of new synthetic catalysts for CO2 reduction has been a central focus of chemical research efforts towards mitigating rising global carbon dioxide levels. In parallel with generating new molecular systems, characterization and benchmarking of these compounds across well-defined catalytic conditions are essential. Nickel(ii) cyclam is known to be an active catalyst for CO2 reduction to CO. The degree of selectivity and activity has been found to differ widely across electrodes used and upon modification of the ligand environment, though without a molecular-level understanding of this variation. Moreover, while proton transfer is key for catalytic activity, the effects of varying the nature of the proton donor remain unclear. In this work, a systematic investigation of the electrochemical and light-driven catalytic behaviour of nickel(ii) cyclam under different aqueous reaction conditions has been performed. The activity and selectivity are seen to vary widely depending on the nature of the buffering agent, even at a constant pH, highlighting the importance of proton transfer for catalysis. Buffer binding to the nickel center is negatively correlated with selectivity, and cationic buffers show high levels of selectivity and activity. These results are discussed in the context of molecular design principles for developing increasingly efficient and selective catalysts. Moreover, identifying these key contributors towards activity has implications for understanding the role of the conserved secondary coordination environments in naturally occurring CO2-reducing enzymes, including carbon monoxide dehydrogenase and formate dehydrogenase.

Understanding and Design of Bidirectional and Reversible Catalysts of Multielectron, Multistep Reactions

Some enzymes, including those that are involved in the activation of small molecules such as H₂ or CO₂, can be wired to electrodes and function in either direction of the reaction depending on the electrochemical driving force and display a significant rate at very small deviations from the equilibrium potential. We call the former property "bidirectionality" and the latter "reversibility". This performance sets very high standards for chemists who aim at designing synthetic electrocatalysts. Only recently, in the particular case of the hydrogen production/evolution reaction, has it been possible to produce inorganic catalysts that function bidirectionally, with an even smaller number that also function reversibly. This raises the question of how to engineer such desirable properties in other synthetic catalysts. Here we introduce the kinetic modeling of bidirectional two-electron-redox reactions in the case of molecular catalysts and enzymes that are either attached to an electrode or diffusing in solution in the vicinity of an electrode. We emphasize that trying to discuss bidirectionality and reversibility in relation to a single redox potential leads to an impasse: the catalyst undergoes two redox transitions, and therefore two catalytic potentials must be defined, which may depart from the two potentials measured in the absence of catalysis. The difference between the two catalytic potentials defines the reversibility; the difference between their average value and the equilibrium potential defines the directionality (also called "preference", or "bias"). We describe how the sequence of events in the bidirectional catalytic cycle can be elucidated on the basis of the voltammetric responses. Further, we discuss the design principles of bidirectionality and reversibility in terms of thermodynamics and kinetics and conclude that neither bidirectionality nor reversibility requires that the catalytic energy landscape be flat. These theoretical findings are illustrated by previous results obtained with nickel diphosphine molecular catalysts and hydrogenases. In particular, analysis of the nickel catalysts highlights the fact that reversible catalysis can be achieved by catalysts that follow complex mechanisms with branched reaction pathways.

Redesign of a Copper Storage Protein into an Artificial Hydrogenase

We report the construction of an artificial hydrogenase (ArH) by reengineering a Cu storage protein (Cspl) into a Ni-binding protein (NBP) employing rational metalloprotein design. The hypothesis driven design approach involved deleting existing Cu sites of Csp1 and identification of a target tetrathiolate Ni binding site within the protein scaffold followed by repacking the hydrophobic core. Guided by modeling, the NBP was expressed and purified in high purity. NBP is a well-folded and stable construct displaying native-like unfolding behavior. Spectroscopic and computational studies indicated that the NBP bound nickel in a distorted square planar geometry that validated the design. Ni(II)-NBP is active for photo-induced H₂ evolution following a reductive quenching mechanism. Ni(II)-NBP catalyzed H⁺ reduction to H₂ gas electrochemically as well. Analysis of the catalytic voltammograms established a proton-coupled electron transfer (PCET) mechanism. Electrolysis studies confirmed H₂ evolution with quantitative Faradaic yields. Our studies demonstrate an important scope of rational metalloprotein design that allows imparting functions into protein scaffolds that have natively not evolved to possess the same function of the target metalloprotein constructs.

Cobalt-based molecular electrocatalysis of nitrile reduction: evolving sustainability beyond hydrogen

Two new cobalt bis-iminopyridines, [Co(DDP)(H2O)2](NO3)2 (1, DDP = cis-[1,3-bis(2-pyridinylenamine)] cyclohexane) and [Co(cis-DDOP)(NO3)](NO3) (2, cis-DDOP = cis-3,5-bis[(2-Pyridinyleneamin]-trans-hydroxycyclohexane) electrocatalyse the 4-proton, 4-electron reduction of acetonitrile to ethylamine. For 1, this reduction occurs in preference to reduction of protons to H2. A coordinating hydroxyl proton relay in 2 reduces the yield of ethylamine and biases the catalytic system back towards H2.

Secondary-Sphere Effects in Molecular Electrocatalytic CO2 Reduction

The generation of fuels and value-added chemicals from carbon dioxide (CO2) using electrocatalysis is a promising approach to the eventual large-scale utilization of intermittent renewable energy sources. To mediate kinetically and thermodynamically challenging transformations of CO2, early reports of molecular catalysts focused primarily on precious metal centers. However, through careful ligand design, earth-abundant first-row transition metals have also demonstrated activity and selectivity for electrocatalytic CO2 reduction. A particularly effective and promising approach for enhancement of reaction rates and efficiencies of molecular electrocatalysts for CO2 reduction is the modulation of the secondary coordination sphere of the active site. In practice, this has been achieved through the mimicry of enzyme structures: incorporating pendent Brønsted acid/base sites, charged residues, sterically hindered environments, and bimetallic active sites have all proved to be valid strategies for iterative optimization. Herein, the development of secondary-sphere strategies to facilitate rapid and selective CO2 reduction is reviewed with an in-depth examination of the classic [Fe(tetraphenylporphyrin)]+, [Ni(cyclam)]2+, Mn(bpy)(CO)3X, and Re(bpy)(CO)3X (X = solvent or halide) systems, including relevant highlights from other recently developed ligand platforms.

Promoting proton coupled electron transfer in redox catalysts through molecular design

Mini-review on using the secondary coordination sphere to facilitate multi-electron, multi-proton catalysis.

Evaluating the impacts of amino acids in the second and outer coordination spheres of Rh-bis(diphosphine) complexes for CO2 hydrogenation

The influence of a biologically inspired second and outer coordination sphere on Rh-bis(diphosphine) CO₂ hydrogenation catalysts was explored.

From protein engineering to artificial enzymes - biological and biomimetic approaches towards sustainable hydrogen production

Hydrogen gas is used extensively in industry today and is often put forward as a suitable energy carrier due its high energy density. Currently, the main source of molecular hydrogen is fossil fuels via steam reforming. Consequently, novel production methods are required to improve the sustainability of hydrogen gas for industrial processes, as well as paving the way for its implementation as a future solar fuel. Nature has already developed an elaborate hydrogen economy, where the production and consumption of hydrogen gas is catalysed by hydrogenase enzymes. In this review we summarize efforts on engineering and optimizing these enzymes for biological hydrogen gas production, with an emphasis on their inorganic cofactors. Moreover, we will describe how our understanding of these enzymes has been applied for the preparation of bio-inspired/-mimetic systems for efficient and sustainable hydrogen production.

Dual properties of a hydrogen oxidation Ni-catalyst entrapped within a polymer promote self-defense against oxygen

The Ni(P2N2)2 catalysts are among the most efficient non-noble-metal based molecular catalysts for H2 cycling. However, these catalysts are O2 sensitive and lack long term stability under operating conditions. Here, we show that in a redox silent polymer matrix the catalyst is dispersed into two functionally different reaction layers. Close to the electrode surface is the "active" layer where the catalyst oxidizes H2 and exchanges electrons with the electrode generating a current. At the outer film boundary, insulation of the catalyst from the electrode forms a "protection" layer in which H2 is used by the catalyst to convert O2 to H2O, thereby providing the "active" layer with a barrier against O2. This simple but efficient polymer-based electrode design solves one of the biggest limitations of these otherwise very efficient catalysts enhancing its stability for catalytic H2 oxidation as well as O2 tolerance.

A family of molecular nickel hydrogen evolution catalysts providing tunable overpotentials using ligand-centered proton-coupled electron transfer paths

The overpotential for H₂ evolution from water can be rationally controlled by tuning the ligand-centered proton-coupled electron transfer (PCET) processes.

Surface Immobilization of Molecular Electrocatalysts for Energy Conversion

Electrocatalysts are critically important for a secure energy future, as they facilitate the conversion between electrical and chemical energy. Molecular catalysts offer precise control of structure that enables understanding of structure-reactivity relationships, which can be difficult to achieve with heterogeneous catalysts. Molecular electrocatalysts can be immobilized on surfaces by covalent bonds or through non-covalent interactions. Advantages of surface immobilization include the need for less catalyst, avoidance of bimolecular decomposition pathways, and easier determination of catalyst lifetime. This Minireview highlights surface immobilization of molecular electrocatalysts for reduction of O₂ , oxidation of H₂ O, production of H₂ , and reduction of CO₂ .