Cu-Catalyzed Esterification Reaction via Aerobic Oxygenation and C–C Bond Cleavage: An Approach to α-Ketoesters

Photochemical Aerobic Upcycling of Polystyrene Plastics

Although the introduction of plastics has improved humanity's everyday life, the fast accumulation of plastic waste, including microplastics and nanoplastics, have created numerous problems with recent studies highlighting their involvement in various aspects of our lives. Upcycling of plastics, the conversion of plastic waste to high-added value chemicals, is a way to combat plastic waste that is receiving increased attention. Herein, we describe a novel aerobic photochemical process for the upcycling of real-life polystyrene-based plastics into benzoic acid. A new process employing a thioxanthone-derivative, in combination with N-bromosuccinimide, under ambient air and 390 nm irradiation is capable of upcycling real-life polystyrene-derived products in benzoic acid in yields varying from 24-54 %.

Visible-Light Driven Synthesis of Vinyl Amines without Photocatalyst

We developed a visible-light-induced vinyl amination of activated alkenes using TMSN3 and CsF through EDA complex formation under an oxygen atmosphere. Without light, the EDA complex forms between activated alkene, CsF, and oxygen. Upon exposure to light, oxygen in the complex gets excited, initiating the HAT process. This method efficiently synthesizes vinyl-amine derivatives via a radical pathway, demonstrating good functional group tolerance and high yields in a short time. Further, the late-stage functionalization enables the synthesis of biologically active heterocycles.

Anion- and Water-facilitated Oxidative Carbon-Carbon Bond Cleavage and Diketonate Carboxylation in Cu(II) Chlorodiketonate Complexes

The O2-dependent carbon-carbon (C-C) bond cleavage reactions of the mononuclear Cu(II) chlorodiketonate complexes [(6-Ph2TPA)Cu(PhC(O)CClC(O)Ph)]ClO4 (1-ClO 4 ) and [(bpy)Cu(PhC(O)CClC(O)Ph)(ClO4)] (3-ClO 4 ) have been further examined in terms of their anion and water dependence. The bpy-ligated Cu(II) chlorodiketonate complex 3-ClO 4 is inherently more reactive with O2 than the 6-Ph2TPA-ligated analog 1-ClO 4 . Added chloride is needed to facilitate O2 reactivity for 1-ClO 4 but not for 3-ClO 4 at 25(1) °C. Evaluation of k obs for the reaction of 1-ClO 4 with O2 under pseudo first-order conditions as a function of the amount of added chloride ion produced saturation type behavior. The bpy-ligated 3-ClO 4 exhibits different behavior, with rate enhancement resulting from both the addition of chloride ion and water. Computational studies indicate that the presence of water lowers the barrier for O2 activation for 3-ClO 4 by ~12 kcal/mol whereas changing the anion from perchlorate to chloride has a smaller effect (lowering of the barrier by ~3 kcal/mol). Notably, the effect of water for 3-ClO 4 is of similar magnitude to the barrier-lowering chloride effect found in the O2 activation pathway for 1-ClO 4 . Thus, both systems involve lower energy O2 activation pathways available, albeit resulting from different ligand effects. Probing the effect of added benzoate anion, it was found that the chloro substituent in the diketonate moiety of 1-ClO 4 and 3-ClO 4 will undergo displacement upon treatment of each complex with tetrabutyl ammonium benzoate to give Cu(II) benzoyloxydiketonate complexes (4 and 5). Complexes 4 and 5 exhibit slow O2-dependent C-C cleavage in the presence of added chloride ion. These results are discussed in the context of the chemistry identified for various divalent metal chlorodiketonate complexes, which have relevance to catalytic systems and metalloenzymes that mediate O2-dependent C-C cleavage within diketonate substrates.

Photochemical Aerobic Upcycling of Polystyrene Plastics via Synergistic Indirect HAT Catalysis

Plastic pollution constitutes an evergrowing urgent environmental problem, since overaccumulation of plastic waste, arising from the immense increase of the production of disposable plastic products, overcame planet's capacity to properly handle them. Chemical upcycling of polystyrene constitutes a convenient method for the conversion of plastic waste into high-added value chemicals, suggesting an attractive perspective in dealing with the environmental crisis. We demonstrate herein a novel, easy-to-perform organocatalytic photoinduced aerobic protocol, which proceeds via synergistic indirect hydrogen atom transfer (HAT) catalysis under LED 390 nm Kessil lamps as the irradiation source. The developed method employs a BrCH2CN-thioxanthone photocatalytic system and was successfully applied to a variety of everyday-life plastic products, leading to the isolation of benzoic acid after simple base-acid work up in yields varying from 23-49 %, while a large-scale experiment was successfully performed, suggesting that the photocatalytic step is susceptible to industrial application.

Decennary Update on Oxidative-Rearrangement Involving 1,2-Aryl C-C Migration Around Alkenes: Synthetic and Mechanistic Insights

In recent years, numerous methodologies on oxidative rearrangements of alkenes have been investigated, that produce multipurpose synthons and heterocyclic scaffolds of potential applications. The present review focused on recently established methodologies for oxidative transformation via 1,2-aryl migration in alkenes (2013-2023). Special emphasis has been placed on mechanistic pathways to understand the reactivity pattern of different substrates, challenges to enhance selectivity, the key role of different reagents, and effect of different substituents, and how they affect the rearrangement process. Moreover, synthetic limitations and future direction also have been discussed. We believe, this review offers new synthetic and mechanistic insight to develop elegant precursors and approaches to explore the utilization of alkene-based compounds for natural product synthesis and functional materials.

Dioxygen compatible electron donor-acceptor catalytic system and its enabled aerobic oxygenation

The photochemical properties of Electron Donor-Acceptor (EDA) complexes present exciting opportunities for synthetic chemistry. However, these strategies often require an inert atmosphere to maintain high efficiency. Herein, we develop an EDA complex photocatalytic system through rational design, which overcomes the oxygen-sensitive limitation of traditional EDA photocatalytic systems and enables aerobic oxygenation reactions through dioxygen activation. The mild oxidation system transfers electrons from the donor to the effective catalytic acceptor upon visible light irradiation, which are subsequently captured by molecular oxygen to form the superoxide radical ion, as demonstrated by the specific fluorescent probe, dihydroethidine (DHE). Furthermore, this visible-light mediated oxidative EDA protocol is successfully applied in the aerobic oxygenation of boronic acids. We believe that this photochemical dioxygen activation strategy enabled by EDA complex not only provides a practical approach to aerobic oxygenation but also promotes the design and application of EDA photocatalysis under ambient conditions.

C-C Bond Cleavage Mediated Reaction for Constructing 3-Carbonyl Imidazo[1,5-a] Pyridines from 1,3-Dicarbonyl Compounds and Pyridin-2-ylmethanamines

A [4 + 1] cyclization and C-C bond cleavage process mediated reaction for constructing 3-carbonyl imidazo[1,5-a] pyridines from 1,3-dicarbonyl compounds and pyridin-2-ylmethanamines has been developed. Various 1,3-dicarbonyl compounds are applicable, and selectivity could be achieved. Importantly, this strategy could be extended to an atom economy method by employing a cyclic 1,3-dicarbonyl compound, and it provided a new view for C-C bond cleavage reactions.

Divergent Synthesis of α-(1,3,5-Triazinylthio)-ketones and Thiazolo[3,2-a][1,3,5]triazines from 1,3-Dicarbonyl compounds or Chalcones with 1,3,5-Triazine-2-thiols

An efficient synthesis of α-(1,3,5-triazinylthio)-ketones from 1,3-dicarbonyl compounds with 1,3,5-triazine-2-thiols has been developed. The reaction proceeds through the C-C bond cleavage and C-S bond reconstruction of 1,3-dicarbonyl compounds, and β-keto esters, β-keto amides, and 1,3-diones were tolerated. In addition, the annulation of 1,3,5-triazine-2-thiols with chalcones has been achieved for the synthesis of thiazolo[3,2-a][1,3,5]triazines. The method occurred in moderate to good yields and tolerated chalcone with a broad functional group.

Aerobic oxidative C-C bond cleavage and functionalization for the synthesis of value-added chemicals

The aerobic oxidative cleavage of C-C bonds is an attractive and sustainable route for constructing valuable molecules such as esters, nitriles, and amides. Traditionally homogeneous catalytic systems for C-C bond cleavage required harsh conditions, stoichiometric oxidants, and noble metal catalysts to overcome the thermodynamic and kinetic barriers of C-C bonds, imposing environmental concerns of the transformation. Therefore, developing efficient, low-cost, and environmentally benign methods for C-C bond cleavage is of great importance and a cutting-edge area in modern chemistry. This feature article summarizes the sustainable aerobic oxidative C-C bond cleavage method developed by our group in the past 5 years. Fundamental principles in catalyst design, substrate scope, and mechanism for C-C bond cleavage are also discussed.

Copper-catalyzed three-component annulation toward pyrroles via the cleavage of two C-C bonds in 1,3-dicarbonyls

The first copper-catalyzed three-component annulation of α,β-unsaturated ketoximes, 1,3-dicarbonyls and paraformaldehyde has been documented. This novel strategy achieved the two C-C bond cleavage of 1,3-dicarbonyl compounds directly as a single-carbon synthon and provided a new and highly efficient method for the synthesis of 2,3-disubstituted pyrroles in moderate to good yields with broad functional group compatibility.

Oxidative Cleavage of Csp3-Csp2 and Csp3-H Bonds with KOtBu: Highly Robust and Practical Synthesis of Diaryl/(het-Ar) Ketones

Herein, we report an efficient and practical approach for synthesizing diaryl(het) ketones from R-CO-CHR-Ar through a simultaneous oxidative cleavage of C-C and C-H bonds using KO^tBu. This method enables synthesizing a variety of unsymmetrical and symmetrical (hetero)aryl ketones in excellent yields, which are otherwise difficult to make. Besides, we synthesized natural products using this method.

Copper-Catalyzed Transamidation of Unactivated Secondary Amides via C-H and C-N Bond Simultaneous Activations

Here, we demonstrate that α-C-H and C-N bonds of unactivated secondary amides can be activated simultaneously by the copper catalyst to synthesize α-ketoamides or α-ketoesters in one step, which is a challenging and underdeveloped transformation. Using copper as a catalyst and air as an oxidant, the reaction is compatible with a broad range of acetoamides, amines, and alcohols. The preliminary mechanism studies and density functional theory calculation indicated that the reaction process may undergo first radical α-oxygenation and then transamidation with the help of the resonant six-membered N,O-chelation and molecular oxygen plays a role as an initiator to trigger the transamidation process. The combination of chelation assistance and dioxygen selective oxygenation strategy would substantially extend the modern mild synthetic amide cleavage toolbox, and we envision that this broadly applicable method will be of great interest in the biopharmaceutical industry, synthetic chemistry, and agrochemical industry.

B(C6F5)3-catalyzed oxidation of α-diazoesters using DMF and molecular oxygen as oxygen sources

A metal-free catalytic oxidation of α-diazoesters via a green environmental-friendly route was developed. The α-diazoesters were converted to α-ketoesters using DMF and molecular oxygen as oxygen sources and B(C₆F₅)₃ as the catalyst, without any additives. This protocol has a broad adaptability of substrates and good compatibility with a range of functional groups, and it offers new insight into reactions catalyzed by B(C₆F₅)₃.

Electrochemical Oxidative C-C Bond Cleavage of Ketones for C-N Bond Formation: A Route to Amides

Herein, we report an efficient electrochemical activation of the C-C bond of aryl ketones for the preparation of amides under catalyst- and external-oxidant-free conditions using aliphatic amines as the N source. Under environmentally benign electrolysis conditions, a series of amides were synthesized in good yield. Our control experiments revealed that electricity plays an important role in this transformation.

Bidirectional noninnocence of hinge-like deprotonated bis-lawsone on selective ruthenium platform: a function of varying ancillary ligands

The present work aimed to obtain discrete heavier metal complexes of unperturbed deprotonated bis-lawsone (hinge-like H₂L = 2,2'-bis(3-hydroxy-1,4-napthoquinone). This is primarily due to its limited examples with lighter metal ions (Co, Zn, and Ga) and the fact that our earlier approach with the osmium ion facilitated its functionalisation. Herein, we demonstrated the successful synthesis and structural characterisation of L^2--derived diruthenium [(bpy)₂Ru^II(μ-L^2-)Ru^II(bpy)₂](ClO₄)₂ [1](ClO₄)₂ (S = 0), (acac)₂Ru^III(μ-L^2-)Ru^III(acac)₂2 (S = 1) and monoruthenium (pap)₂Ru(L^2-) 3 (S = 0) derivatives (bpy = 2,2'-bipyridine, acac = acetylacetonate, and pap = 2-phenylazopyridine). The crystal structures established that (i) O,O^-/O,O^- donating five-membered bis-bidentate and O^-,O^- donating seven-membered bidentate chelating modes of deprotonated L^2- in rac (ΔΔ/ΛΛ) diastereomeric [1](ClO₄)₂, 2 and 3, respectively. (ii) The L^2- bridging unit in [1](ClO₄)₂, 2 and 3 underwent twisting its two naphthoquinone rings with respect to the ring connecting C-C bond by 73.01°, 62.15° and 59.12°, respectively. (iii) Intermolecular π-π interactions (∼3.5 Å) between the neighbouring molecules. The paramagnetic complex 2 (S = 1) with two non-interacting Ru(III) (S = 1/2) ions exhibited weak antiferromagnetic coupling only at very low temperatures. In agreement with the magnetic results, 2 displayed typical Ru^III-based anisotropic EPR in CH₃CN (<g>/Δg: 2.314/0.564) but without any forbidden g_1/2 signal at 120 K. The complexes exhibited multiple redox processes in CH₃CN in the experimental potential window of ± 2.0 V versus SCE. The analysis of the redox steps via a combined experimental and theoretical (DFT/TD-DFT) approach revealed the involvement of L^2- to varying extents in both the oxidative and reductive processes as a consequence of its bidirectional redox non-innocent feature. The mixing of the frontier orbitals of the metal ion and L^2- due to their closeness in energy indeed led to the resonating electronic form in certain redox states instead of any precise electronic structural state.

Highly efficient C(CO)-C(alkyl) bond cleavage in ketones to access esters over ultrathin N-doped carbon nanosheets

Selective oxidative cleavage of the C(CO)–C bond in ketones to access esters is a highly attractive strategy for upgrading ketones. However, it remains a great challenge to realize this important transformation over heterogeneous metal-free catalysts. Herein, we designed a series of porous and ultrathin N-doped carbon nanosheets (denoted as CN-X, where X represents the pyrolysis temperature) as heterogeneous metal-free catalysts. It was observed that the fabricated CN-800 could efficiently catalyze the oxidative cleavage of the C(CO)–C bond in various ketones to generate the corresponding methyl esters at 130 °C without using any additional base. Detailed investigations revealed that the higher content and electron density of the graphitic-N species contributed to the excellent performance of CN-800. Besides, the high surface area, affording active sites that are more easily accessed, could also enhance the catalytic activity. Notably, the catalysts have great potential for practical applications because of some obvious advantages, such as low cost, neutral reaction conditions, heterogeneous nature, high efficiency, and broad ketone scope. To the best of our knowledge, this is the first work on efficient synthesis of methyl esters via oxidative esterification of ketones over heterogeneous metal-free catalysts.

Ultrathin and metal-free N-doped carbon nanosheets showed high activity and selectivity for oxidative esterification of ketones via C(CO)–C bond cleavage to access methyl esters.

Site-selective amination and/or nitrilation via metal-free C(sp2)-C(sp3) cleavage of benzylic and allylic alcohols

Benzylic/allylic alcohols are converted via site-selective C(sp²)-C(sp³) cleavage to value-added nitrogenous motifs, viz., anilines and/or nitriles as well as N-heterocycles, utilizing commercial hydroxylamine-O-sulfonic acid (HOSA) and Et₃N in an operationally simple, one-pot process. Notably, cyclic benzylic/allylic alcohols undergo bis-functionalization with attendant increases in architectural complexity and step-economy.

Electrochemical two-electron oxygen reduction reaction (ORR) induced aerobic oxidation of α-diazoesters

Electrochemical oxygen reduction reaction (ORR) is a powerful tool for introducing oxygen functional groups in synthetic chemistry. However, compared with the well-developed one-electron oxygen reduction process, the applications of two-electron oxygen reduction in electrochemical synthesis have been seldom studied. We present herein our recent progress in the oxidation of α-diazoesters to α-ketoesters by in situ generated hydrogen peroxide via a two-electron oxygen reduction approach. A diverse collection of valuable α-ketoester products was obtained with moderate to high yields under an exogenous-oxidant-free and metal catalyst-free electrochemical conditions.

Visible light-driven copper(ii) catalyzed aerobic oxidative cleavage of carbon–carbon bonds: a combined experimental and theoretical study

By switching on visible blue light, aerobic oxidation of various substrates, such as α-substituted, β-substituted and α-halo styrenes, was first realized with a copper(ii) catalyst.

From Amides to Urea Derivatives or Carbamates with Chemospecific C-C Bond Cleavage at Room Temperature

The ureas and carbamates are common motifs in pharmaceuticals, agrochemicals, biologically active compounds and organocatalysis applications. Herein, we report a significant advance in this area and present the general method...

Palladium-Catalyzed Cascade Carbonylation to α,β-Unsaturated Piperidones via Selective Cleavage of Carbon-Carbon Triple Bonds

A direct and selective synthesis of α,β-unsaturated piperidones by a new palladium-catalyzed cascade carbonylation is described. In the presented protocol, easily available propargylic alcohols react with aliphatic amines to provide a broad variety of interesting heterocycles. Key to the success of this transformation is a remarkable catalytic cleavage of the present carbon-carbon triple bond by using a specific catalyst with 2-diphenylphosphinopyridine as ligand and appropriate reaction conditions. Mechanistic studies and control experiments revealed branched unsaturated acid 11 as crucial intermediate.

Di[12]aneN3-Functionalized Green Fluorescent Protein Chromophore for GFP Luminescence Simulation and Efficient Gene Transfection In Vitro and In Vivo

Although a plethora of gene carriers have been developed for potential gene therapy, imageable stimuli-responsive gene vectors with fast access to the nucleus, high biocompatibility, and transfection efficiency are still scarce. Herein, we report the design and synthesis of four dendrite-shaped cationic liposomes, MPA-HBI-R/DOPE (R: n-butyl, 1; n-octyl, 2; n-dodecyl, 3; palmyl, 4), prepared via esterification of 4-alkoxybenzylideneimidazolinone containing aliphatic chains of different lengths (HBI-R), the green fluorescent protein (GFP) chromophore, with a di[12]aneN₃ unit. Liposomes were fabricated via the self-assembly of MPA-HBI-R, assisted with 1,2-dioleoyl-sn-glycerol-3-phosphorylethanolamine (DOPE). These liposomes (MPA-HBI-R/DOPE) exhibited efficient DNA condensation, pH-responsive degradation, excellent cellular biocompatibility (up to 150 μM), and high transfection efficiency. Molecular docking experiments were also used to verify the optimal interaction between MPA-HBI-R and DNA, as well as the fluorescence enhancements. In particular, MPA-HBI-2/DOPE delivered DNA into the nucleus in less than an hour, and its luciferase transfection activity was more than 10 times that by Lipo2000, across multiple cell lines. The GFP chromophore conjugation allowed trackable intracellular delivery and release of DNA in real time via fluorescence imaging. Furthermore, efficient red fluorescent protein (RFP) transfection in zebrafish, with an efficiency of more than 6 times that by Lipo2000, was also achieved. The results not only realized, for the first time, the combination of gene delivery and GFP-simulated light emission, allowing fluorescent tracking and highly efficient gene transfection, but also offered valuable insights into the use of biomimetic chromophore for the development of the next-generation nonviral vectors.

Direct C-C Bond Cleavage of 1,3-Dicarbonyl Compounds as a Single-Carbon Synthon: Synthesis of 2-Aryl-4-quinolinecarboxylates

A novel [2 + 1 + 3] cyclization reaction for the synthesis of 2-aryl-4-quinolinecarboxylates from aryl methyl ketones, arylamines, and 1,3-dicarbonyl compounds has been established. This metal-free process achieved the C-C bond cleavage of 1,3-dicarbonyl compounds directly as a single-carbon synthon. The reaction is highly efficient and has good substrate compatibility while operating under mild conditions. This method has good practicability and successfully realized the synthesis of bioactive molecules.

Zn-Nx sites on N-doped carbon for aerobic oxidative cleavage and esterification of C(CO)-C bonds

Selective cleavage of C-C bonds is very important in organic chemistry, but remains challenging because of their inert chemical nature. Herein, we report that Zn/NC-X catalysts, in which Zn2+ coordinate with N species on microporous N-doped carbon (NC) and X denotes the pyrolysis temperature, can effectively catalyze aerobic oxidative cleavage of C(CO)-C bonds and quantitatively convert acetophenone to methyl benzoate with a yield of 99% at 100 °C. The Zn/NC-950 can be applied for a wide scope of acetophenone derivatives as well as more challenging alkyl ketones. Detail mechanistic investigations reveal that the catalytic performance of Zn/NC-950 can be attributed to the coordination between Zn2+ and N species to change the electronic state of the metal, synergetic effect of the Zn single sites with their surrounding N atoms, as well as the microporous structure with the high surface area and structural defects of the NC.

Molecular oxygen-mediated oxygenation reactions involving radicals

Molecular oxygen as a green, non-toxic and inexpensive oxidant has displayed lots of advantages compared with other oxidants towards more selective, sustainable, and environmentally benign organic transformations. The oxygenation reactions which employ molecular oxygen or ambient air as both an oxidant and an oxygen source provide an efficient route to the synthesis of oxygen-containing compounds, and have been demonstrated in practical applications such as pharmaceutical synthesis and late-stage functionalization of complex molecules. This review article introduces the recent advances of radical processes in molecular oxygen-mediated oxygenation reactions. Reaction scopes, limitations and mechanisms are discussed based on reaction types and catalytic systems. Conclusions and perspectives are also given in the end.

Acetyl nitrate mediated conversion of methyl ketones to diverse carboxylic acid derivatives

The development of a novel acetyl nitrate mediated oxidative conversion of methyl ketones to carboxylic acid derivatives is described. By analogy to the haloform reaction and supported by experimental and computational investigation we propose a mechanism for this transformation.

Visible Light-Driven, Copper-Catalyzed Aerobic Oxidative Cleavage of Cycloalkanones

A visible light-driven, copper-catalyzed aerobic oxidative cleavage of cycloalkanones has been presented. A variety of cycloalkanones with varying ring sizes and various α-substituents reacted well to give the distal keto acids or dicarboxylic acids with moderate to good yields.

Cobalt-Catalyzed Aerobic Oxidative Cleavage of Alkyl Aldehydes: Synthesis of Ketones, Esters, Amides, and α-Ketoamides

A widely applicable approach was developed to synthesize ketones, esters, amides via the oxidative C-C bond cleavage of readily available alkyl aldehydes. Green and abundant molecular oxygen (O₂ ) was used as the oxidant, and base metals (cobalt and copper) were used as the catalysts. This strategy can be extended to the one-pot synthesis of ketones from primary alcohols and α-ketoamides from aldehydes.

Solvent-Switched Oxidation Selectivities with O2 : Controlled Synthesis of α-Difluoro(thio)methylated Alcohols and Ketones

The solvent-switched hydroxylation and oxygenation of α-difluoro(thio)methylated carbanions with molecular oxygen under mild conditions are reported. This strategy tames the redox reactions of the in situ generated hydroperoxy difluoromethylsulfides, in which solvent-bonding can alter their reactivity and switch the oxidation selectivities. These controllable three-component reactions of gem-difluoroalkenes, thiols and molecular oxygen afford various useful α-difluoro(thio)methylated alcohols and ketones in high yields. Significantly, this protocol has been applied in the synthesis different bioactive molecules. Mechanism studies enable the detection of the hydroperoxy difluoromethylsulfide intermediates and exclude the thiol-based radical pathway.

Size-Driven Inversion of Selectivity in Esterification Reactions: Secondary Beat Primary Alcohols

Relative rates for the Lewis base-mediated acylation of secondary and primary alcohols carrying large aromatic side chains with anhydrides differing in size and electronic structure have been measured. While primary alcohols react faster than secondary ones in transformations with monosubstituted benzoic anhydride derivatives, relative reactivities are inverted in reactions with sterically biased 1-naphthyl anhydrides. Further analysis of reaction rates shows that increasing substrate size leads to an actual acceleration of the acylation process, the effect being larger for secondary as compared to primary alcohols. Computational results indicate that acylation rates are guided by noncovalent interactions (NCIs) between the catalyst ring system and the DED substituents in the alcohol and anhydride reactants. Thereby stronger NCIs are formed for secondary alcohols than for primary alcohols.

Tris-(2-pyridylmethyl)amine-ligated Cu(II) 1,3-diketonate complexes: anaerobic retro-Claisen and dehalogenation reactivity of 2-chloro-1,3-diketonate derivatives

We report synthetic, structural and reactivity investigations of tris-(2-pyridylmethyl)amine (TPA)-ligated Cu(ii) 1,3-diketonate complexes. These complexes exhibit anaerobic retro-Claisen type C-C bond cleavage reactivity which exceeds that found in analogs supported by chelate ligands with fewer and/or weaker pyridyl interactions.

Metal-free visible-light-induced aerobic oxidation of α-diazoesters leading to α-ketoesters in air

A metal-free and visible-light-induced strategy has been established for the construction of α-ketoesters via aerobic oxidation of α-diazoesters with dioxygen in air at room temperature.

Synthesis of aliphatic α-ketoamides from α-substituted methyl ketones via a Cu-catalyzed aerobic oxidative amidation

α-Ketoamides are an important key functional group and have been used as versatile and valuable intermediates and synthons in a variety of functional group transformations. Synthetic methods for making aryl α-ketoamides as drug candidates have been greatly improved through metal-catalyzed aerobic oxidative amidations. However, the preparation of alkyl α-ketoamides through metal-catalyzed aerobic oxidative amidations has not been reported because generating α-ketoamides from aliphatic ketones with two α-carbons theoretically provides two distinct α-ketoamides. Our strategy is to activate the α-carbon by introducing an N-substituent at one of the two α-positions. The key to this strategy is how heterocyclic compounds such as triazoles and imidazoles affect the selectivity of the synthesis of the alkyl α-ketoamides. From this basic concept, and by optimizing the reaction and elucidating the mechanism of the synthesis of aryl α-ketoamides via a copper-catalyzed aerobic oxidative amidation, we prepared fourteen aliphatic α-ketoamides in high yields (48-84%).

Copper(I)-Catalyzed Aerobic Oxidation of α-Diazoesters

A practical Cu-catalyzed oxidation of α-diazoesters to α-ketoesters using molecular oxygen as an oxidant has been developed. Both electron-poor and electron-rich aryl α-diazoesters are suitable substrates and provide the α-ketoesters in good yields. In this oxidative system, α-diazo-β-ketoesters are also compatible as substrates but unexpectedly furnish α-ketoesters via C-C bond cleavage, rather than the vicinal tricarbonyl products.

Rhodium(II)-catalyzed multicomponent assembly of α,α,α-trisubstituted esters via formal insertion of O-C(sp3)-C(sp2) into C-C bonds

The direct cleavage of C(CO)−C single bonds, delivering otherwise inaccessible compounds, is a significant challenge. Although the transition metal-catalyzed insertion of functional groups into C(CO)−C bonds has been studied, strained ketone substrates or chelating assistance were commonly required. In this article, we describe a rhodium(II)-catalyzed three-component reaction of 1,3-diones, diazoesters, and N,N-dimethylformamide (DMF), leading to an unusual formal insertion of O–C(sp³)–C(sp²) into unstrained C(CO)−C bonds. This procedure provides a rapid entry to a gamut of otherwise inaccessible α,α,α-trisubstituted esters/amide from relatively simple substrates in a straightforward manner. 55 examples of highly decorated products demonstrate the broad functional group tolerance and substrate scope. The combination of control experiments and isotope-labeling reactions support that O, C(sp³), and C(sp²) units derive from 1,3-diones, diazoesters, and DMF, respectively.

The direct cleavage of C(CO)−C single bonds is usually restricted to strained ketone substrates or to chelating assistance. Here, the authors show a rhodium(II)-catalyzed three-component reaction of 1,3-diones, diazoesters, and DMF, leading to an unusual formal insertion of O–C(sp³)–C(sp²) into unstrained C(CO)–C bonds.

Catalytic conversion of ketones to esters via C(O)-C bond cleavage under transition-metal free conditions

The catalytic conversion of ketones to esters via C(O)-C bond cleavage under transition-metal free conditions is reported. This catalytic process proceeds under solvent-free conditions and offers an easy operational procedure, broad substrate scope with excellent selectivity, and reaction scalability.

Kinetic Analysis as an Optimization Tool for Catalytic Esterification with a Moisture-Tolerant Zirconium Complex

This work describes the use of kinetics as a tool for rational optimization of an esterification process with down to equimolar ratios of reagents using a recyclable commercially available zirconocene complex in catalytic amounts. In contrast to previously reported group IV metal-catalyzed esterification protocols, the work presented herein circumvents the use of water scavengers and perfluorooctane sulfonate (PFOS) ligands. Insights into the operating mechanism are presented.