Thioamide quenching of fluorescent probes through photoinduced electron transfer: mechanistic studies and applications

Thioimidates provide general access to thioamide, amidine, and imidazolone peptide-bond isosteres

Thioamides, amidines, and heterocycles are three classes of modifications that can act as peptide-bond isosteres to alter the peptide backbone. Thioimidate protecting groups can address many of the problematic synthetic issues surrounding installation of these groups. Historically, amidines have received little attention in peptides due to limitations in methods to access them. The first robust and general procedure for the introduction of amidines into peptide backbones exploits the utility of thioimidate protecting groups as a means to side-step reactivity that ultimately renders existing methods unsuitable for the installation of amidines along the main-chain of peptides. Further, amidines formed on-resin can be reacted to form (4H)-imidazolone heteorcycles which have recently been shown to act as cis-amide isosteres. General methods for heterocyclic installation capable of geometrically restricting peptide conformation are also under-developed. This work is significant because it describes a generally applicable and divergent approach to access unexplored peptide designs and architectures.

Thioimidate Solutions to Thioamide Problems during Thionopeptide Deprotection

Thioamides have structural and chemical similarity to peptide bonds, offering valuable insights when probing peptide backbone interactions, but are prone to side reactions during solid-phase peptide synthesis (SPPS). Thioimidates have been demonstrated to be effective protecting groups for thioamides during peptide elongation. We further demonstrate how thioimidates can assist thioamides through the most yield-crippling step of thionopeptide deprotection, allowing for the first isolation of an important benchmark α-helical peptide that had previously eluded synthesis and isolation.

Contemporary Applications of Thioamides and Methods for Their Synthesis

Thioamides are naturally occurring isosteres of amide bonds in which the chalcogen atom of the carbonyl is changed from oxygen to sulfur. This substitution gives rise to altered nucleophilicity and hydrogen bonding properties with importance for both chemical reactivity and non-covalent interactions. As such, thioamides have been introduced into biologically active compounds to achieve improved target affinity and/or stability towards hydrolytic enzymes but have also been applied as probes of protein and peptide folding and dynamics. Recently, a series of new methods have been developed for the synthesis of thioamides as well as their utilization in peptide chemistry. Further, novel strategies for the incorporation of thioamides into proteins have been developed, enabling both structural and functional studies to be performed. In this Review, we highlight the recent developments in the preparation of thioamides and their applications for peptide modification and study of protein function.

Shedding light on cellular dynamics: the progress in developing photoactivated fluorophores

Photoactivated fluorophores (PAFs) are highly effective imaging tools that exhibit a removal of caging groups upon light excitation, resulting in the restoration of their bright fluorescence. This unique property allows for precise control over the spatiotemporal aspects of small molecule substances, making them indispensable for studying protein labeling and small molecule signaling within live cells. In this comprehensive review, we explore the historical background of this field and emphasize recent advancements based on various reaction mechanisms. Additionally, we discuss the structures and applications of the PAFs. We firmly believe that the development of more novel PAFs will provide powerful tools to dynamically investigate cells and expand the applications of these techniques into new domains.

A Metal-Free Triazacoronene-Based Bimodal VOC Sensor

Developing suitable sensors for selective and sensitive detection of volatile organic compounds (VOCs) is crucial for monitoring indoor and outdoor air quality. VOCs are very harmful to our health upon inhalation or contact. Bimodal sensor materials with more than one transduction capability (optical and electrical) offer the ability to extract complementary information from the individual analyte, thus improving detection accuracy and performance. The privilege of manipulating the optoelectronic properties of the polycyclic aromatic hydrocarbon-based semiconducting materials offers rapid signal transduction in multimodal sensing applications. A thiophene-functionalized triazacoronene (TTAC) donor-acceptor-donor (D-A-D) type sensor is reported here for VOC sensing. The single-crystal X-ray structure analysis of the TTAC revealed that a distinctive supramolecular polymer architecture was formed because of cooperative π-π and intermolecular D-A interactions and exhibited rapid signal transduction upon exposure to specific VOCs. The TTAC-embedded green luminescent paper-based test strip exhibited an on-off fluorescence response upon nitrobenzene vapor exposure for 120 s. The selective and rapid response is due to the fast photoinduced electron transfer, as is evident from the time-resolved excited-state dynamics and density functional theory studies. The thick-film-based prototype chemiresistive sensor detects harmful VOCs in a custom-made gas sensing system including benzene, toluene, and nitrobenzene. The TTAC sensor rapidly responds (200 s) at relatively low temperatures (180 οC) compared to other reported metal-oxide-based sensors.

Critical assessment of selenourea as an efficient small molecule fluorescence quenching probe to monitor protein dynamics

Organoselenium compounds have recently been the experimentalists' delight due to their broad applications in organic synthesis, medicinal chemistry, and materials science. Selenium atom replacement of the carbonyl oxygen of the urea moiety dramatically reduces the HOMO-LUMO gap and oxidation potential, which completely changes the physicochemical properties of selenocarbonyl compounds. To our surprise, the photophysics and utility of a simple molecule such as selenourea (SeU) have not been explored in detail, which persuaded us to investigate its role in excited state processes. The steady-state emission, temperature-dependent time-correlated single photon counting, and femtosecond fluorescence upconversion experimental results confirmed that SeU significantly enhances the fluorescence quenching through a photoinduced electron transfer (PET) mechanism with an ∼10 ps ultrafast intrinsic PET lifetime component which is mostly absent in thiourea (TU). A wide range of fluorophores, based on their different redox abilities and fluorescence lifetimes covering a broad spectral window (λex: 390-590 nm and λem: 490-690 nm), were chosen to validate the proof of the concept. It was extended to tetramethylrhodamine (TMR)-5-maleimide labeled lysozyme protein, where we observed significant fluorescence quenching in the presence of SeU. The present work emphasizes that the high quenching efficiency with an ultrafast PET process, reduced orbital energy gap, and higher negative free energy change of the electron transfer reaction are the representative characteristics of selenourea or selenoamides to enable them as potential surrogates of thioamides or oxoamides quenching probes to monitor protein conformational changes and dynamics.

Investigation of the interaction between the functionalized mesoporous silica nanocarriers and bovine serum albumin via multi-spectroscopy

It is well known that the physicochemical properties of nanocarriers, which are closely related to the surface modification of nanoparticles, have crucial impacts on their biological effects. Herein, the interaction between functionalized degradable dendritic mesoporous silica nanoparticles (DDMSNs) and bovine serum albumin (BSA) was investigated for probing into the nanocarriers' potential toxicity using multi-spectroscopy such as ultraviolet/visible (UV/Vis), synchronous fluorescence, Raman and circular dichroism (CD) spectroscopy. BSA, owing to its structural homology and high sequence similarity with HSA, was employed as the model protein to study the interactions with DDMSNs, amino-modified DDMSNs (DDMSNs-NH₂) and hyaluronic acid (HA) coated nanoparticles (DDMSNs-NH₂-HA). It was found that the static quenching behavior of DDMSNs-NH₂-HA to BSA was accompanied by an endothermic and hydrophobic force-driven thermodynamic process, which was confirmed by fluorescence quenching spectroscopic studies and thermodynamic analysis. Furthermore, the conformational variations of BSA upon interaction with nanocarriers were observed by combination of UV/Vis, synchronous fluorescence, Raman and CD spectroscopy. The microstructure of amino residues in BSA changed due to the existence of nanoparticles, for example, the amino residues and hydrophobic groups exposed to microenvironment and the alpha helix (α-helix) content of BSA decreased. Specially, through thermodynamic analysis, the diverse binding modes and driving forces between nanoparticles and BSA were discovered because of different surface modifications on DDMSNs, DDMSNs-NH₂ and DDMSNs-NH₂-HA. We believe that this work can promote the interpretation of mutual impact between nanoparticles and biomolecules, which will be in favor of predicting the biological toxicity of nano-DDS and engineering functionalized nanocarriers.

A review of the current research on in vivo and in vitro detection for alpha-synuclein: a biomarker of Parkinson's disease

Parkinson's disease is a health-threatening neurodegenerative disease of the elderly with clinical manifestations of motor and non-motor deficits such as tremor palsy and loss of smell. Alpha-synuclein (α-Syn) is the pathological basis of PD, it can abnormally aggregate into insoluble forms such as oligomers, fibrils, and plaques, causing degeneration of nigrostriatal dopaminergic neurons in the substantia nigra in the patient's brain and the formation of Lewy bodies (LBs) and Lewy neuritis (LN) inclusions. As a result, achieving α-Syn aggregate detection in the early stages of PD can effectively stop or delay the progression of the disease. In this paper, we provide a brief overview and analysis of the molecular structures and α-Syn in vivo and in vitro detection methods, such as mass spectrometry, antigen-antibody recognition, electrochemical sensors, and imaging techniques, intending to provide more technological support for detecting α-Syn early in the disease and intervening in the progression of Parkinson's disease.

Continuous Histone Deacylase Activity Assays

Protein lysine acylation represents one of the most common post-translational modifications. Obviously, highly reactive metabolic intermediates, like thioesters and mixed anhydrides between phosphoric acid and organic acids, modify lysine residues spontaneously. Additionally, enzymes using acyl-CoAs as co-substrates transfer the acyl residue specifically to defined sequences within proteins. The counteracting enzymes are called histone deacetylases (HDACs), releasing the free lysine side chain. Such enzymatic activities are involved in different cellular processes like tumor progression, immune response, regulation of metabolism, and aging. Modulators of such enzymatic activities represent valuable tools in drug discovery. Therefore, direct and continuous assays to monitor enzymatic activity of HDACs are needed. Here we describe different assay formats allowing both monitoring of Zn²⁺-dependent HDACs via UV-Vis-spectroscopy and NAD⁺-dependent HDACs (sirtuins) by fluorescence-based assay formats. Additionally, we describe methods enabling efficient screening of HDAC-inhibitors via fluorescence displacement assays.

Site-Selective Amide Functionalization by Catalytic Azoline Engrafting

Direct peptide and protein activation is a challenging transformation because of the stabilizing effect of the amide group. While enzymes can be considered as prototypical systems that have evolved to achieve high selectivity and specificity, small-molecule catalysts that functionalize the amide group may accommodate a much larger selection of substrates but currently remain scarce. Here, by combining the desired features from both catalytic regimes we designed an artificial cyclodehydratase, a catalytic system for the site-selective modification of peptides and natural products by engrafting heterocycles into their scaffolds. The catalytic system features a molybdenum(VI) center that was decorated with a sterically congested tripod ligand. The optimized catalyst can introduce azolines into small molecules, natural products, and oligopeptides with high efficiency and minimal waste. We further demonstrate the utility of the new protocol in the direct functionalization of a single amide group in the presence of up to seven other chemically similar positions and in the direct conversion of these groups into amines and thioamides. This new mechanistic paradigm may address an unmet need for a general method for the selective and sustainable functionalization of peptides and natural products.

Expansion of the Genetic Code Through the Use of Modified Bacterial Ribosomes

Biological protein synthesis is mediated by the ribosome, and employs ~20 proteinogenic amino acids as building blocks. Through the use of misacylated tRNAs, presently accessible by any of several strategies, it is now possible to employ in vitro and in vivo protein biosynthesis to elaborate proteins containing a much larger variety of amino acid building blocks. However, the incorporation of this broader variety of amino acids is limited to those species utilized by the ribosome. As a consequence, virtually all of the substrates utilized over time have been L-α-amino acids. In recent years, a variety of structural and biochemical studies have provided important insights into those regions of the 23S ribosomal RNA that are involved in peptide bond formation. Subsequent experiments, involving the randomization of key regions of 23S rRNA required for peptide bond formation, have afforded libraries of E. coli harboring plasmids with the rrnB gene modified in the key regions. Selections based on the use of modified puromycin derivatives with altered amino acids then identified clones uniquely sensitive to individual puromycin derivatives. These clones often recognized misacylated tRNAs containing altered amino acids similar to those in the modified puromycins, and incorporated the amino acid analogues into proteins. In this fashion, it has been possible to realize the synthesis of proteins containing D-amino acids, β-amino acids, phosphorylated amino acids, as well as long chain and cyclic amino acids in which the nucleophilic amino group is not in the α-position. Of special interest have been dipeptides and dipeptidomimetics of diverse utility.

Ynamide-Mediated Thioamide and Primary Thioamide Syntheses

Environmentally friendly ynamide-mediated thioamidation of monothiocarboxylic acids with amines or ammonium hydroxide for the syntheses of thioamides and primary thioamides is described. Simple and mild reaction conditions enable the reaction to tolerate a wide variety of functional groups such as hydroxyl group, ester, tertiary amine, ketone, and amide moieties. Readily available NaSH served as the sulfur source, avoiding the use of toxic, expensive, and malodorous organic sulfur reagents and making this strategy environmentally friendly and practical. Importantly, the stereochemical integrity of α-chiral monothiocarboxylic acids was maintained during the activation step and subsequent aminolysis process, thus offering a racemization-free strategy for peptide C-terminal modification. Furthermore, a number of thioamide-modified drugs were prepared in good yields by using this protocol and the synthesized primary thioamides were transformed into backbone thiazolyl modified peptides.

Hydrogen Bond and Geometry Effects of Thioamide Backbone Modifications

Thioamide substitution of backbone peptide bonds can probe interactions along the main chain of proteins. Despite theoretical predictions of the enhanced hydrogen bonding propensities of thioamides, previous studies often do not consider the geometric constraints imposed by folded peptide secondary structure. This work addresses drawbacks in previous studies that ignored the geometry dependence and local dielectric properties of thioamide hydrogen bonding and identifies cases where thioamides may be either stronger or weaker hydrogen-bonding partners than amides.

Semi-Crystalline Poly(thioether) Prepared by Visible-Light-Induced Organocatalyzed Thiol-ene Polymerization in Emulsion

A photocatalytic thiol-ene aqueous emulsion polymerization under visible-light is described to prepare linear semicrystalline latexes using 2,2'-dimercaptodiethyl sulfide as dithiol and various dienes. The procedure involves low irradiance (3 mW cm^-2 ), LED irradiation source, eosin-Y disodium as organocatalyst, low catalyst loading (<0.05% mol), and short reaction time scales (<1 h). The resulting latexes have molecular weights of about 10 kg mol^-1 , average diameters of 100 nm, and a linear structure consisting only of thioether repeating units. Electron-transfer reaction from a thiol to the triplet excited state of the photocatalyst is suggested as the primary step of the mechanism (type I), whereas oxidation by singlet oxygen generated by energy transfer has a negligible effect (type II). Only polymers prepared with aliphatic dienes such as diallyl adipate or di(ethylene glycol) divinyl ether exhibit a high crystallization tendency as revealed by differential scanning calorimetry, polarized optical microscopy, and X-ray diffraction. Ordering and crystallization are driven by molecular packing of poly(thioether) chains combining structural regularity, compactness, and flexibility.

Continuous Sirtuin/HDAC (histone deacetylase) activity assay using thioamides as PET (Photoinduced Electron Transfer)-based fluorescence quencher

Histone deacylase 11 and human sirtuins are able to remove fatty acid-derived acyl moieties from the ε-amino group of lysine residues. Specific substrates are needed for investigating the biological functions of these enzymes. Additionally, appropriate screening systems are required for identification of modulators of enzymatic activities of HDAC11 and sirtuins. We designed and synthesized a set of activity probes by incorporation of a thioamide quencher unit into the fatty acid-derived acyl chain and a fluorophore in the peptide sequence. Systematic variation of both fluorophore and quencher position resulted "super-substrates" with catalytic constants of up to 15,000,000 M^-1s^-1 for human sirtuin 2 (Sirt2) enabling measurements using enzyme concentrations down to 100 pM in microtiter plate-based screening formats. It could be demonstrated that the stalled intermediate formed by the reaction of Sirt2-bound thiomyristoylated peptide and NAD⁺ has IC₅₀ values below 200 pM.

Rational design of thioamide peptides as selective inhibitors of cysteine protease cathepsin L

Aberrant levels of cathepsin L (Cts L), a ubiquitously expressed endosomal cysteine protease, have been implicated in many diseases such as cancer and diabetes. Significantly, Cts L has been identified as a potential target for the treatment of COVID-19 due to its recently unveiled critical role in SARS-CoV-2 entry into the host cells. However, there are currently no clinically approved specific inhibitors of Cts L, as it is often challenging to obtain specificity against the many highly homologous cathepsin family cysteine proteases. Peptide-based agents are often promising protease inhibitors as they offer high selectivity and potency, but unfortunately are subject to degradation in vivo. Thioamide substitution, a single-atom O-to-S modification in the peptide backbone, has been shown to improve the proteolytic stability of peptides addressing this issue. Utilizing this approach, we demonstrate herein that good peptidyl substrates can be converted into sub-micromolar inhibitors of Cts L by a single thioamide substitution in the peptide backbone. We have designed and scanned several thioamide stabilized peptide scaffolds, in which one peptide, RS 1A, was stabilized against proteolysis by all five cathepsins (Cts L, Cts V, Cts K, Cts S, and Cts B) while inhibiting Cts L with >25-fold specificity against the other cathepsins. We further showed that this stabilized RS 1A peptide could inhibit Cts L in human liver carcinoma lysates (IC50 = 19 μM). Our study demonstrates that one can rationally design a stabilized, specific peptidyl protease inhibitor by strategic placement of a thioamide and reaffirms the place of this single-atom modification in the toolbox of peptide-based rational drug design.

Rational Design of Crystallization-Induced-Emission Probes To Detect Amorphous Protein Aggregation in Live Cells

Unlike amyloid aggregates, amorphous protein aggregates with no defined structures have been challenging to target and detect in a complex cellular milieu. In this study, we rationally designed sensors of amorphous protein aggregation from aggregation-induced-emission probes (AIEgens). Utilizing dicyanoisophorone as a model AIEgen scaffold, we first sensitized the fluorescence of AIEgens to a nonpolar and viscous environment mimicking the interior of amorphous aggregated proteins. We identified a generally applicable moiety (dimethylaminophenylene) for selective binding and fluorescence enhancement. Regulation of the electron-withdrawing groups tuned the emission wavelength while retaining selective detection. Finally, we utilized the optimized probe to systematically image aggregated proteome upon proteostasis network regulation. Overall, we present a rational approach to develop amorphous protein aggregation sensors from AIEgens with controllable sensitivity, spectral coverage, and cellular performance.

Incorporating thioamides into proteins by native chemical ligation

The thioamide is a versatile replacement of the peptide backbone with altered hydrogen bonding and conformational preferences, as well the ability participate in energy and electron transfer processes. Semi-synthetic incorporation of a thioamide into a protein can be used to study protein folding or protein/protein interactions using these properties. Semi-synthesis also provides the opportunity to study the role of thioamides in natural proteins. Here we outline the semi-synthesis of a model protein, the B1 domain of protein G (GB1) with a thioamide at the N-terminus or the C-terminus. The thioamide is synthetically incorporated into a fragment by solid-phase peptide synthesis, whereas the remainder of the protein is recombinantly expressed. Then, the two fragments are joined by native chemical ligation. The explicit protocol for GB1 synthesis is accompanied by examples of applications with GB1 and other proteins in structural biology and protein misfolding studies.

Doubling Förster Resonance Energy Transfer Efficiency in Proteins with Extrinsic Thioamide Probes: Implications for Thiomodified Nucleobases

Designing a potential protein-ligand pair is pivotal, not only to track the protein structure dynamics, but also to assist in an atomistic understanding of drug delivery. Herein, the potential of a small model thioamide probe being used to study albumin proteins is reported. By monitoring the Förster resonance energy transfer (FRET) dynamics with the help of fluorescence spectroscopic techniques, a twofold enhancement in the FRET efficiency of 2-thiopyridone (2TPY), relative to that of its amide analogue, is observed. Molecular dynamics simulations depict the relative position of the free energy minimum to be quite stable in the case of 2TPY through noncovalent interactions with sulfur, which help to enhance the FRET efficiency. Finally, its application is shown by pairing thiouracils with protein. It is found that the site-selective sulfur atom substitution approach and noncovalent interactions with sulfur can substantially enhance the FRET efficiency, which could be a potential avenue to explore in the design of FRET probes to study the structure and dynamics of biomolecules.

Cyanation: a photochemical approach and applications in organic synthesis

This review summarises the photocatalytic cyanation strategies to construct C(sp²)–CN, C(sp³)–CN and X–CN (X = N, S) bonds.

Side-chain thioamides as fluorescence quenching probes

Thioamides, single atom oxygen-to-sulfur substitutions of canonical amide bonds, can be valuable probes for protein folding and protease studies. Here, we investigate the fluorescence quenching properties of thioamides incorporated into the side-chains of amino acids. We synthesize and incorporate Fmoc-protected, solid-phase peptide synthesis building blocks for introducing Nε -thioacetyl-lysine and γ-thioasparagine. Using rigid model peptides, we demonstrate the distance-dependent fluorescence quenching of these thioamides. Furthermore, we describe attempts to incorporate of Nε -thioacetyl-lysine into proteins expressed in Escherichia coli using amber codon suppression.

Visible light-mediated applications of methylene blue in organic synthesis

This review presents the manipulation of methylene blue in visible-light-assisted organic synthesis.

Improved Modeling of Thioamide FRET Quenching by Including Conformational Restriction and Coulomb Coupling

Thioamide-containing amino acids have been shown to quench a wide range of fluorophores through distinct mechanisms. Here, we quantitatively analyze the mechanism through which the thioamide functional group quenches the fluorescence of p-cyanophenylalanine (Cnf), tyrosine (Tyr), and tryptophan (Trp). By comparing PyRosetta simulations to published experiments performed on polyproline ruler peptides, we corroborate previous findings that both Cnf and Tyr quenching occurs via Förster resonance energy transfer (FRET), while Trp quenching occurs through an alternate mechanism such as Dexter transfer. Additionally, optimization of the peptide sampling scheme and comparison of thioamides attached to the peptide backbone and side chain revealed that the significant conformational restriction associated with the thioamide moiety results in a high sensitivity of the apparent FRET efficiency to underlying conformational differences. Moreover, by computing FRET efficiencies from structural models using a variety of approaches, we find that quantitative accuracy in the role of Coulomb coupling is required to explain contributions to the observed quenching efficiency from individual structures on a detailed level. Last, we demonstrate that these additional considerations improve our ability to predict thioamide quenching efficiencies observed during binding of thioamide-labeled peptides to fluorophore-labeled variants of calmodulin.

A General Descriptor ΔE Enables the Quantitative Development of Luminescent Materials Based on Photoinduced Electron Transfer

Photoinduced electron transfer (PET) is one of the most important mechanisms for developing fluorescent probes and biosensors. Quantitative prediction of the quantum yields of these probes and sensors is crucial to accelerate the rational development of novel PET-based functional materials. Herein, we developed a general descriptor (ΔE) for predicting the quantum yield of PET probes, with a threshold value of ∼0.6 eV. When ΔE < ∼0.6 eV, the quantum yield is low (mostly <2%) due to the substantial activation of PET in polar environments; when ΔE > ∼0.6 eV, the quantum yield is high because of the inhibition of PET. This simple yet effective descriptor is applicable to a wide range of fluorophores, such as BODIPY, fluorescein, rhodamine, and Si-rhodamine. This ΔE descriptor enables us not only to establish new applications for existing PET probes but also to quantitatively design novel PET-based fluorophores for wash-free bioimaging and AIEgen development.

Studies of Thioamide Effects on Serine Protease Activity Enable Two-Site Stabilization of Cancer Imaging Peptides

Thioamide substitutions in peptides can be used as fluorescence quenchers in protease sensors and as stabilizing modifications of hormone analogs. To guide these applications in the context of serine proteases, we here examine the cleavage of several model substrates, scanning a thioamide between the P3 and P3' positions, and identify perturbing positions for thioamide substitution. While all serine proteases tested were affected by P1 thioamidation, certain proteases were also significantly affected by other thioamide positions. We demonstrate how these findings can be applied by harnessing the combined P3/P1 effect of a single thioamide on kallikrein proteolysis to protect two key positions in a neuropeptide Y-based imaging probe, increasing its serum half-life to >24 h while maintaining potency for binding to Y1 receptor expressing cells. Such stabilized peptide probes could find application in imaging cell populations in animal models or even in clinical applications such as fluorescence-guided surgery.

Sensing mechanism of a ratiometric near-infrared fluorescent chemosensor for cysteine hydropersulfide: Intramolecular charge transfer

Previous studies have shown that the cysteine hydropersulfide (Cys-SSH) as the sulfur donor is crucial to sulfur-containing cofactors synthesis. Recently, a selective and sensitive near-infrared ratiometric fluorescent chemosensor Cy-DiSe has been designed and synthesized to detect Cys-SSH spontaneously. Herein, by means of the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) approaches, the sensing mechanism has been thoroughly explored. According to our calculations, the experimental data have been reproduced. The results indicate the intramolecular charge transfer (ICT) is the reason for changes in fluorescence wavelengths. Compared with the chemosensor Cy-DiSe, the larger energy gap of Cy induced by ICT mechanism leads to the blue-shift of the absorption and emission spectra, which guarantees that Cy-DiSe can become a ratiometric fluorescent chemosensor to detect Cys-SSH.

Unambiguous Detection of Elevated Levels of Hypochlorous Acid in Double Transgenic AD Mouse Brain

Alzheimer's disease (AD) is one of the most prevalent forms of dementia. The current diagnosis methods based on the behavior and cognitive decline or imaging of core biomarkers, namely, amyloid-β (Aβ) plaques and neurofibrillary tangles (NFTs), in the brain offer poor to moderate success. Detection and imaging of biomarkers that cause additional traits of pathophysiological aberrations in the brain are invaluable to monitor early disease onset and progression of AD pathology. The pathological hallmark of AD is associated with generation of excessive reactive oxygen species (ROS) in the brain, which aggravate oxidative stress and inflammation. ROS production involves elevated levels of hypochlorous acid (HOCl) and can serve as one of the potential biomarkers for the diagnosis of AD. We report the design, synthesis, and characterization of switchable coumarin-morpholine (CM) conjugates as off-on fluorescence probes for the specific detection of HOCl produced and proximally localized with amyloid plaques. The nonfluorescent thioamide probe CM2 undergoes regioselective transformation to fluorescent amide probe CM1 in the presence of HOCl (∼90-fold fluorescence enhancement and 0.32 quantum yield) with high selectivity and sensitivity (detection limit: 0.17 μM). The excellent cellular uptake and blood-brain barrier (BBB) crossing ability of CM2 allowed unambiguous and differential detection, imaging, and quantification of HOCl in cellular milieu and in the wild type (WT) and AD mouse brains. This study demonstrates the elevated level of HOCl in the AD mouse brain and the potential to expand the repertoire of biomarkers for the diagnosis of AD.

One-Atom Substitution Enables Direct and Continuous Monitoring of Histone Deacylase Activity

We developed a one-step direct assay for the determination of histone deacylase (HDAC) activity by substituting the carbonyl oxygen of the acyl moiety with sulfur, resulting in thioacylated lysine side chains. This modification is recognized by class I HDACs with different efficiencies ranging from not accepted for HDAC1 to kinetic constants similar to that of the parent oxo substrate for HDAC8. Class II HDACs can hydrolyze thioacylated substrates with approximately 5-10-fold reduced k_cat values, which resembles the effect of thioamide substitution in metallo-protease substrates. Class IV HDAC11 accepts thiomyristoyl modification less efficiently with an ∼5-fold reduced specificity constant. On the basis of the unique spectroscopic properties of thioamide bonds (strong absorption in spectral range of 260-280 nm and efficient fluorescence quenching), HDAC-mediated cleavage of thioamides could be followed by ultraviolet-visible and fluorescence spectroscopy in a continuous manner. The HDAC activity assay is compatible with microtiter plate-based screening formats up to 1536-well plates with Z' factors of >0.75 and signal-to-noise ratios of >50. Using thioacylated lysine residues in p53-derived peptides, we optimized substrates for HDAC8 with a catalytic efficiency of >250000 M^-1 s^-1, which are more than 100-fold more effective than most of the known substrates. We determined inhibition constants of several inhibitors for human HDACs using thioacylated peptidic substrates and found good correlation with the values from the literature. On the other hand, we could introduce N-methylated, N-acylated lysine residues as inhibitors for HDACs with an IC₅₀ value of 1 μM for an N-methylated, N-myristoylated peptide derivative and human HDAC11.

Microwave-assisted iodine-catalyzed oxidative coupling of dibenzyl(difurfuryl)disulfides with amines: a rapid and efficient protocol for thioamides

An efficient protocol for synthesis of thioamides was developed via the microwave-assisted iodine-catalyzed oxidative coupling of dibenzyl(difurfuryl)disulfides with amines. This process is scalable and tolerates a wide spectrum of amines to deliver the corresponding products in moderate to excellent yields in 10 minutes, providing a cheap and rapid approach to thioamides.

Single-Atom Fluorescence Switch: A General Approach toward Visible-Light-Activated Dyes for Biological Imaging

Photoactivatable fluorophores afford powerful molecular tools to improve the spatial and temporal resolution of subcellular structures and dynamics. By performing a single sulfur-for-oxygen atom replacement within common fluorophores, we have developed a facile and general strategy to obtain photoactivatable fluorogenic dyes across a broad spectral range. Thiocarbonyl substitution within fluorophores results in significant loss of fluorescence via a photoinduced electron transfer-quenching mechanism as suggested by theoretical calculations. Significantly, upon exposure to air and visible light residing in their absorption regime (365-630 nm), thio-caged fluorophores can be efficiently desulfurized to their oxo derivatives, thus restoring strong emission of the fluorophores. The effective photoactivation makes thio-caged fluorophores promising candidates for super-resolution imaging, which was realized by photoactivated localization microscopy (PALM) with low-power activation light under physiological conditions in the absence of cytotoxic additives (e.g., thiols, oxygen scavengers), a feature superior to traditional PALM probes. The versatility of this thio-caging strategy was further demonstrated by multicolor super-resolution imaging of lipid droplets and proteins of interest.

Fluorescent Probes for Studying Thioamide Positional Effects on Proteolysis Reveal Insight into Resistance to Cysteine Proteases

Thioamide substitutions of the peptide backbone have been shown to reduce proteolytic degradation, and this property can be used to generate competitive protease inhibitors and to stabilize peptides toward degradation in vivo. Here, we present a straightforward sensor design that allows a systematic study of the positional effects of thioamide substitution by using real-time fluorescence. Thioamide scanning in peptide substrates of five papain family cysteine proteases demonstrates that a thioamide at or near the scissile bond can slow proteolysis in all cases, but that the magnitude of the effects varies with position and protease in spite of high sequence homology. Mechanistic investigation of papain proteolysis reveals that the thioamide effects derive from reductions in both affinity (KM ) and turnover number (kcat ). Computational modeling allows these effects to be understood based on disruption of key enzyme-substrate hydrogen bonds, providing a model for future rational use of thioamides to confer cysteine protease resistance.

Consideration of Binding Kinetics in the Design of Stapled Peptide Mimics of the Disordered Proteins Eukaryotic Translation Initiation Factor 4E-Binding Protein 1 and Eukaryotic Translation Initiation Factor 4G

Protein disorder plays a crucial role in signal transduction and is key for many cellular processes including transcription, translation, and cell cycle. Within the intrinsically disordered protein interactome, the α-helix is commonly used for binding, which is induced via a disorder-to-order transition. Because the targeting of protein-protein interactions (PPIs) remains an important challenge in medicinal chemistry, efforts have been made to mimic this secondary structure for rational inhibitor design through the use of stapled peptides. Cap-dependent mRNA translation is regulated by two disordered proteins, 4E-BP1 and eIF4G, that inhibit or stimulate the activity of the m7G cap-binding translation initiation factor, eIF4E, respectively. Both use an α-helical motif for eIF4E binding, warranting the investigation of stapled peptide mimics for manipulating eIF4E PPIs. Herein, we describe our efforts toward this goal, resulting in the synthesis of a cell-active stapled peptide for further development in manipulating aberrant cap-dependent translation in human diseases.

Novel Hg2+-Selective Signaling Probe Based on Resorufin Thionocarbonate and its μPAD Application

In this study, a novel resorufin thionocarbonate-based Hg2+-selective signaling probe (RT) for microfluidic paper-based analytical device (μPAD) applications is reported. The designed probe, RT, was readily synthesized by the one-step reaction of resorufin with phenyl thionochloroformate. The RT probe displayed a prominent color change from yellow to pink and a marked turn-on fluorescence signaling behavior exclusively toward the Hg2+ ion. The signaling of RT was due to Hg2+-induced hydrolysis of the phenyl thionocarbonate moiety to form the parent resorufin dye, which restored its spectroscopic properties. In addition, RT exhibited the Hg2+-selective signaling behavior without interference by coexisting environmentally relevant metal ions. The detection limit for Hg2+ in simulated wastewater samples was estimated to be 5.8 × 10-8 M. In particular, an RT-equipped μPAD prepared using a wax printing technique enabled simple and convenient determination of Hg2+ ions in simulated wastewater samples, with a detection limit of 5.9 × 10-6 M.

A Conditionally Fluorescent Peptide Reporter of Secondary Structure Modulation

Proteins containing intrinsic disorder often form secondary structure upon interaction with a binding partner. Modulating such structures presents an approach for manipulating the resultant functional outcomes. Translational repressor protein 4E-BP1 is an example of an intrinsically disordered protein that forms an α-helix upon binding to its protein ligand, eIF4E. Current biophysical methods for analyzing binding-induced structural changes are low-throughput, require large amounts of sample, or are extremely sensitive to signal interference by the ligand itself. Herein, we describe the discovery and development of a conditionally fluorescent 4E-BP1 peptide that reports structural changes of its helix in high-throughput format. This reporter peptide is based on conditional quenching of fluorescein by thioamides. In this case, fluorescence signal increases as the peptide becomes more ordered. Conversely, destabilization of the α-helix results in decreased fluorescence signal. The low concentration and low volume of peptide required make this approach amenable for high-throughput screening to discover ligands that alter peptide secondary structure.

Synchronous sensing of three conserved sequences of Zika virus using a DNAs@MOF hybrid: experimental and molecular simulation studies

A metal–organic framework of Cu(ii) has been prepared and impregnated with three dye-labeled DNA sequences. The hybrid material formed is capable of synchronous detection of three conserved Zika virus RNA sequences.

Amino acid-derived alternating polyampholyte luminogens

A unique polyampholyte luminogen comprised of alternatively placed oppositely charged moieties onto the poly(styrene-alt-maleimide) skeleton was synthesized, and used for the specific detection of carbon disulfide (CS₂) in both solution and vapor phases.

A simple hypochlorous acid signaling probe based on resorufin carbonodithioate and its biological application

A novel HOCl signaling probe based on the oxidative hydrolysis of resorufin carbonodithioate to generate resorufin dye was investigated and applied to cell imaging.

Improving the Fluorescent Probe Acridonylalanine Through a Combination of Theory and Experiment

Acridonylalanine (Acd) is a useful fluorophore for studying proteins by fluorescence spectroscopy, but it can potentially be improved by being made longer wavelength or brighter. Here, we report the synthesis of Acd core derivatives and their photophysical characterization. We also performed ab initio calculations of the absorption and emission spectra of Acd derivatives, which agree well with experimental measurements. The amino acid aminoacridonylalanine (Aad) was synthesized in forms appropriate for genetic incorporation and peptide synthesis. We show that Aad is a superior FRET acceptor to Acd in a peptide cleavage assay, and that Aad can be activated by an aminoacyl tRNA synthetase for genetic incorporation. Together, these results show that we can use computation to design enhanced Acd derivatives which can be used in peptides and proteins.

Dithioamide substitutions in proteins: effects on thermostability, peptide binding, and fluorescence quenching in calmodulin

Thioamide substitutions in the backbones of proteins can modulate their structure and thermostability, or serve as spectroscopic probes in fluorescence quenching experiments. Using native chemical ligation, we have produced the first examples of a protein (calmodulin) containing two thioamides. Dithioamide variants were made to explore the effects of combining stabilizing, neutral, and destabilizing single thioamide substitutions. One of the dithioamide calmodulin variants exhibited stabilization greater than any monothioamide variant, although the effect could not easily be anticipated from the results of single substitutions. Each of the calmodulin variants retained the ability to bind a target peptide, and the dithioamide proteins exhibited an increase in fluorescence quenching of tryptophan relative to their single thioamide counterparts. These results show that multiply thioamidated proteins can be synthesized, and that properly placed thioamides can be used to increase protein thermostability or enhance fluorecsence quenching in peptide binding experiments.

Electronic interactions of i, i + 1 dithioamides: increased fluorescence quenching and evidence for n-to-π* interactions

Thioamide residues can be effective, minimally-perturbing fluorescence quenching probes for studying protein folding and proteolysis. In order to increase the level of quenching, we have here explored the use of adjacent dithioamides. We have found that they are more effective fluorescence quenchers, as expected, but we have also observed unexpected changes in the thioamide absorption spectra that may arise from n-to-π* interactions of the thiocarbonyls. We have made use of the increased quenching to improve the fluorescence turn-on of thioamide protease sensors.

Increasing the bioactive space of peptide macrocycles by thioamide substitution

We show that substituting a single atom, O to S (amide to thioamide), in a peptide bond results in global restriction of the conformational flexibility in peptide macrocycles with minimal perturbation of the parent conformation. The van der Waals interactions between the C 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 1111111111111111111111111111111111 1111111111111111111111111111111111 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 0000000000000000000000000000000000 S group and the surrounding atoms are the major driving force in inducing the conformational restriction, resulting in well-defined structures of these cyclic peptides with static 3-D presentation of the pharmacophores. Utilizing this property of thioamides, we report the development of a superactive antagonist of pro-angiogenic αvβ3, αvβ5 and α5β1 integrins, which are responsible for cancer cell proliferation and survival. Using simple thio-scanning and spatial screening of a non-efficacious and conformationally flexible cyclic peptide, we could achieve a more than 10⁵ fold enhancement in its efficacy in cellulo via a single O to S substitution. The developed peptide shows better efficacy in inhibiting the pro-angiogenic integrins than the drug candidate cilengitide, with a significantly enhanced serum half-life of 36 h compared to that of cilengitide (12 h). The long shelf-life, absence of non-specific toxicity and resistance to degradation of the thioamidated macrocyclic peptides in human serum suggest the promise of thioamides in markedly improving the affinity, efficacy and pharmacology of peptide macrocycles.

Fluorescence spectroscopy reveals N-terminal order in fibrillar forms of α-synuclein

The neuronal protein α-synuclein (αS) plays a key role in Parkinson's disease, forming inclusions termed Lewy bodies and Lewy neurites. Recent improvements in cryo-electron diffraction and solid state NMR (ssNMR) have led to the elucidation of the structures of peptides derived from the αS fibril core and full-length human αS in fibrils. Despite the valuable insight offered by these methods, there are still several questions about the structures' relevance to pathological aggregates. Herein, we present fluorescence data collected in vitro under the conditions which fibrils are typically assembled. Our data suggest that, in solution, fibrils are largely structured as observed by ssNMR. However, we observe significant disparities in the αS N-terminus as compared to ssNMR data, which provide insight on its important role in αS aggregation and fibril structure.

Lanthanum-Based Metal-Organic Frameworks for Specific Detection of Sudan Virus RNA Conservative Sequences down to Single-Base Mismatch

Reactions of La(NO₃)₃·6H₂O with the polar, tritopic quaternized carboxylate ligands N-carboxymethyl-3,5-dicarboxylpyridinium bromide (H₃CmdcpBr) and N-(4-carboxybenzyl)-3,5-dicarboxylpyridinium bromide (H₃CbdcpBr) afford two water-stable metal-organic frameworks (MOFs) of {[La₄(Cmdcp)₆(H₂O)₉]}_n (1, 3D) and {[La₂(Cbdcp)₃(H₂O)₁₀]}_n (2, 2D). MOFs 1 and 2 absorb the carboxyfluorescein (FAM)-tagged probe DNA (P-DNA) and quench the fluorescence of FAM via a photoinduced electron transfer (PET) process. The nonemissive P-DNA@MOF hybrids thus formed in turn function as sensing platforms to distinguish conservative linear, single-stranded RNA sequences of Sudan virus with high selectivity and low detection limits of 112 and 67 pM, respectively (at a signal-to-noise ratio of 3). These hybrids also exhibit high specificity and discriminate down to single-base mismatch RNA sequences.

Amplified fluorescence emission of bolaamphiphilic perylene-azacrown ether derivatives directed towards molecular recognition events

Long-term creative approaches have been considered in the design of molecular probes to overcome the quenching effect of important dyes in an aqueous medium. Using the rational donor-acceptor based design principle, we demonstrate herein the different fluorescence states of a non-conjugated symmetrical perylene-azacrown ether system in a solution, from the molecular to the aggregated states. The ethylene-spacer is exceptionally capable of fluorescence enhancement, even in the aggregated state (organic nanoparticle, ONPs, 44 nm), overcoming the quenching effect on changing the solvent from tetrahydrofuran to water. The ONPs with crown ether receptors at the surface show colloidal stability in an aqueous solution. Furthermore, an improved fluorescent state is developed via ONPs-polymer (protamine, Pro) hybridization. Supramolecular interactions between the crown ring and the guanidinium group in Pro play an important role in the ONPs-Pro hybrid formation. The decorated fluorescent hybrid state is finally used as a nano-probe for sensing heparin via the turn-OFF mechanism. The decoration method is further generalized by recognition of the nucleotides. Herein, we detail the bottom-up approach to the molecular design and development of the different fluorescent states of a useful probe. Most excitingly, this new approach is very general and adaptive to facile detection.

The effects of thioamide backbone substitution on protein stability: a study in α-helical, β-sheet, and polyproline II helical contexts

Thioamides are single atom substitutions of the peptide bond that serve as versatile probes of protein structure. Effective use of thioamides requires a robust understanding of the impact that the substitution has on a protein of interest. However, the thermodynamic effects of thioamide incorporation have only been studied in small structural motifs, and their influence on secondary structure in the context of full-length proteins is not known. Here we describe a comprehensive survey of thioamide substitutions in three benchmark protein systems (calmodulin, the B1 domain of protein G, and collagen) featuring the most prevalent secondary structure motifs: α-helix, β-sheet, and polyproline type II helix. We find that in most cases, effects on thermostability can be understood in terms of the positioning and local environment of the thioamide relative to proximal structural elements and hydrogen bonding networks. These observations set the stage for the rational design of thioamide substituted proteins with predictable stabilities.