Synergistic Oxygen Evolving Activity of a TiO2-Rich Reconstructed SrTiO3(001) Surface

Study of CO2 Adsorption Properties on the SrTiO3(001) Surface with Ambient Pressure XPS

The adsorption properties of CO2 on the SrTiO3(001) surface were investigated using ambient pressure X-ray photoelectron spectroscopy under elevated pressure and temperature conditions. On the Nb-doped TiO2-enriched (1 × 1) SrTiO3 surface, CO2 adsorption, i.e., the formation of CO3 surface species, occurs first at the oxygen lattice site under 10-6 mbar CO2 at room temperature. The interaction of CO2 molecules with oxygen vacancies begins when the CO2 pressure increases to 0.25 mbar. The adsorbed CO3 species on the Nb-doped SrTiO3 surface increases continuously as the pressure increases but starts to leave the surface as the surface temperature increases, which occurs at approximately 373 K on the defect-free surface. On the undoped TiO2-enriched (1 × 1) SrTiO3 surface, CO2 adsorption also occurs first at the lattice oxygen sites. Both the doped and undoped SrTiO3 surfaces exhibit an enhancement of the CO3 species with the presence of oxygen vacancies, thus indicating the important role of oxygen vacancies in CO2 dissociation. When OH species are removed from the undoped SrTiO3 surface, the CO3 species begin to form under 10-6 mbar at 573 K, thus indicating the critical role of OH in preventing CO2 adsorption. The observed CO2 adsorption properties of the various SrTiO3 surfaces provide valuable information for designing SrTiO3-based CO2 catalysts.

Surface phase diagrams from nested sampling

Studies in atomic-scale modeling of surface phase equilibria often focus on temperatures near zero Kelvin due to the challenges in calculating the free energy of surfaces at finite temperatures. The Bayesian-inference-based nested sampling (NS) algorithm allows for modeling phase equilibria at arbitrary temperatures by directly and efficiently calculating the partition function, whose relationship with free energy is well known. This work extends NS to calculate adsorbate phase diagrams, incorporating all relevant configurational contributions to the free energy. We apply NS to the adsorption of Lennard-Jones (LJ) gas particles on low-index and vicinal LJ solid surfaces and construct the canonical partition function from these recorded energies to calculate ensemble averages of thermodynamic properties, such as the constant-volume heat capacity and order parameters that characterize the structure of adsorbate phases. Key results include determining the nature of phase transitions of adsorbed LJ particles on flat and stepped LJ surfaces, which typically feature an enthalpy-driven condensation at higher temperatures and an entropy-driven reordering process at lower temperatures, and the effect of surface geometry on the presence of triple points in the phase diagrams. Overall, we demonstrate the ability and potential of NS for surface modeling.

Surface Design Strategy of Catalysts for Water Electrolysis

Hydrogen, a new energy carrier that can replace traditional fossil fuels, is seen as one of the most promising clean energy sources. The use of renewable electricity to drive hydrogen production has very broad prospects for addressing energy and environmental problems. Therefore, many researchers favor electrolytic water due to its green and low-cost advantages. The electrolytic water reaction comprises the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Understanding the OER and HER mechanisms in acidic and alkaline processes contributes to further studying the design of surface regulation of electrolytic water catalysts. The OER and HER catalysts are mainly reviewed for defects, doping, alloying, surface reconstruction, crystal surface structure, and heterostructures. Besides, recent catalysts for overall water splitting are also reviewed. Finally, this review paves the way to the rational design and synthesis of new materials for highly efficient electrocatalysis.

Defect engineering of oxide perovskites for catalysis and energy storage: synthesis of chemistry and materials science

Oxide perovskites have emerged as an important class of materials with important applications in many technological areas, particularly thermocatalysis, electrocatalysis, photocatalysis, and energy storage. However, their implementation faces numerous challenges that are familiar to the chemist and materials scientist. The present work surveys the state-of-the-art by integrating these two viewpoints, focusing on the critical role that defect engineering plays in the design, fabrication, modification, and application of these materials. An extensive review of experimental and simulation studies of the synthesis and performance of oxide perovskites and devices containing these materials is coupled with exposition of the fundamental and applied aspects of defect equilibria. The aim of this approach is to elucidate how these issues can be integrated in order to shed light on the interpretation of the data and what trajectories are suggested by them. This critical examination has revealed a number of areas in which the review can provide a greater understanding. These include considerations of (1) the nature and formation of solid solutions, (2) site filling and stoichiometry, (3) the rationale for the design of defective oxide perovskites, and (4) the complex mechanisms of charge compensation and charge transfer. The review concludes with some proposed strategies to address the challenges in the future development of oxide perovskites and their applications.

Precipitation of dopants on acceptor-doped LaMnO3±δ revealed by defect chemistry from first principles

Perovskite oxides degrade at elevated temperatures while precipitating dopant-rich particles on the surface. A knowledge-based improvement of surface stability requires a fundamental and quantitative understanding of the dopant precipitation mechanism on these materials. We propose that dopant precipitation is a consequence of the variation of dopant solubility between calcination and operating conditions in solid oxide fuel cells (SOFCs) and electrolyzer cells (SOECs). To study dopant precipitation, we use 20% (D = Ca, Sr, Ba)-doped LaMnO_3+δ (LDM20) as a model system. We employ a defect model taking input from density functional theory calculations. The defect model considers the equilibration of LDM20 with a reservoir consisting of dopant oxide (DO), peroxide (DO₂), and O₂ in the gas phase. The equilibrated non-stoichiometry of the A-site and B-site as a function of temperature, T, and oxygen partial pressure, p(O₂), reveals three regimes for LDM20: A-site deficient (oxidizing conditions), A-site rich (atmospheric conditions), and near-stoichiometric (reducing conditions). Assuming an initial A/B non-stoichiometry, we compute the dopant precipitation boundaries in a p-T phase diagram. Our model predicts precipitation both under reducing (DO) and under highly oxidizing conditions (DO₂). We found precipitation under anodic, SOEC conditions to be promoted by large dopant size, while under cathodic, SOFC conditions precipitation is promoted by initial A-site excess. The main driving forces for precipitation are oxygen uptake by the condensed phase under oxidizing conditions and oxygen release assisted by B-site vacancies under reducing conditions. Possible strategies for mitigating dopant precipitation under in electrolytic and fuel cell conditions are discussed.

Surface stability of perovskite oxides under OER operating conditions: a first principles approach

Understanding the surface stability of perovskite oxides under OER operating conditions is crucial for the atomistic design of electrocatalysts for electrochemical water-splitting.

IrO_{2} Surface Complexions Identified through Machine Learning and Surface Investigations

A Gaussian approximation potential was trained using density-functional theory data to enable a global geometry optimization of low-index rutile IrO_{2} facets through simulated annealing. Ab initio thermodynamics identifies (101) and (111) (1×1) terminations competitive with (110) in reducing environments. Experiments on single crystals find that (101) facets dominate and exhibit the theoretically predicted (1×1) periodicity and x-ray photoelectron spectroscopy core-level shifts. The obtained structures are analogous to the complexions discussed in the context of ceramic battery materials.

Tuning proton-coupled electron transfer by crystal orientation for efficient water oxidization on double perovskite oxides

Developing highly efficient and cost-effective oxygen evolution reaction (OER) electrocatalysts is critical for many energy devices. While regulating the proton-coupled electron transfer (PCET) process via introducing additive into the system has been reported effective in promoting OER activity, controlling the PCET process by tuning the intrinsic material properties remains a challenging task. In this work, we take double perovskite oxide PrBa_0.5Sr_0.5Co_1.5Fe_0.5O_5+δ (PBSCF) as a model system to demonstrate enhancing OER activity through the promotion of PCET by tuning the crystal orientation and correlated proton diffusion. OER kinetics on PBSCF thin films with (100), (110), and (111) orientation, deposited on single crystal LaAlO₃ substrates, were investigated using electrochemical measurements, density functional theory (DFT) calculations, and synchrotron-based near ambient X-ray photoelectron spectroscopy. The results clearly show that the OER activity and the ease of deprotonation depend on orientation and follow the order of (100) > (110) > (111). Correlated with OER activity, proton diffusion is found to be the fastest in the (100) film, followed by (110) and (111) films. Our results point out a way of boosting PCET and OER activity, which can also be successfully applied to a wide range of crucial applications in green energy and environment.

Water adsorption, dissociation and oxidation on SrTiO3 and ferroelectric surfaces revealed by ambient pressure X-ray photoelectron spectroscopy

Unveiling surface adsorbates under atmospheric conditions and in surface water redox reactions on TiO₂ terminated surfaces and ferroelectric oxides, as studied by AP-XPS.

Controlling Reaction Selectivity through the Surface Termination of Perovskite Catalysts

Although perovskites have been widely used in catalysis, tuning of their surface termination to control reaction selectivity has not been well established. In this study, we employed multiple surface-sensitive techniques to characterize the surface termination (one aspect of surface reconstruction) of SrTiO₃ (STO) after thermal pretreatment (Sr enrichment) and chemical etching (Ti enrichment). We show, by using the conversion of 2-propanol as a probe reaction, that the surface termination of STO can be controlled to greatly tune catalytic acid/base properties and consequently the reaction selectivity over a wide range, which is not possible with single-metal oxides, either SrO or TiO₂ . Density functional theory (DFT) calculations explain well the selectivity tuning and reaction mechanism on STO with different surface termination. Similar catalytic tunability was also observed on BaZrO₃ , thus highlighting the generality of the findings of this study.

A DFT study of the effect of SO4 groups on the properties of TiO2 nanoparticles

We present a study of the optical, electronic, and structural properties of TiO₂ anatase-structured nanoparticles upon adsorption of SO₄ groups, which are always present on the surface of the particles during the sulfate manufacturing method. Structural and electronic properties were studied using the density functional theory method (DFT), and optical properties were obtained by time-dependent DFT. It was found that SO₄ groups alter both the geometric and electronic structure of TiO₂ nanoparticles and change the photoabsorption characteristics. In particular, we find that η²-O₂ type O-O moieties are formed due to the adsorption of 3 and 4SO₄ groups.

New modalities of strain-control of ferroelectric thin films

Ferroelectrics, with their spontaneous switchable electric polarization and strong coupling between their electrical, mechanical, thermal, and optical responses, provide functionalities crucial for a diverse range of applications. Over the past decade, there has been significant progress in epitaxial strain engineering of oxide ferroelectric thin films to control and enhance the nature of ferroelectric order, alter ferroelectric susceptibilities, and to create new modes of response which can be harnessed for various applications. This review aims to cover some of the most important discoveries in strain engineering over the past decade and highlight some of the new and emerging approaches for strain control of ferroelectrics. We discuss how these new approaches to strain engineering provide promising routes to control and decouple ferroelectric susceptibilities and create new modes of response not possible in the confines of conventional strain engineering. To conclude, we will provide an overview and prospectus of these new and interesting modalities of strain engineering helping to accelerate their widespread development and implementation in future functional devices.

Screening mechanisms at polar oxide heterointerfaces

The interfaces of polar oxide heterostructures can display electronic properties unique from the oxides they border, as they require screening from either internal or external sources of charge. The screening mechanism depends on a variety of factors, including the band structure at the interface, the presence of point defects or adsorbates, whether or not the oxide is ferroelectric, and whether or not an external field is applied. In this review, we discuss both theoretical and experimental aspects of different screening mechanisms, giving special emphasis to ways in which the mechanism can be altered to provide novel or tunable functionalities. We begin with a theoretical introduction to the problem and highlight recent progress in understanding the impact of point defects on polar interfaces. Different case studies are then discussed, for both the high thickness regime, where interfaces must be screened and each interface can be considered separately, and the low thickness regime, where the degree and nature of screening can be manipulated and the interfaces are close enough to interact. We end with a brief outlook toward new developments in this rapidly progressing field.

Theoretical Modeling of Tribochemical Reaction on Pt and Au Contacts: Mechanical Load and Catalysis

Microelectromechanical system and nanoelectromechanical system (MEMS and NEMS) transistors are considered promising for size-reducing and power-maximizing electronic devices. However, the tribopolymer which forms due to the mechanical load to the contacts affects the conductivity dramatically. This is one of the challenging problems that prevents the widespread practical use of these otherwise promising devices. Here, we use density functional theory (DFT) to investigate the mechanisms of tribopolymer formation, including normal mechanical load and the catalytic effect, as well as the electrochemical effect of the metal contacts. We select benzene as the background gas, because it is one of the most common and severe hydrocarbon contaminants. Two adsorption cases are considered: one is benzene on the reactive metal surface, Pt(111), and the other is benzene on the noble metal, Au(111). We demonstrate that the formation of tribopolymer is induced by both the mechanical load and the catalytic effect of the contact. First, benzene molecules are adsorbed on the Pt surfaces. Then, due to the closure of the Pt contacts, stress is applied to the adsorbates, making the C-H bonds more fragile. As the stress increases further, H atoms are pressed close to the Pt substrate and begin to bond with Pt atoms. Thus, Pt acts as a catalyst, accelerating the dehydrogenation process. When there is voltage applied across the contacts, the catalytic effect is enhanced by electrochemistry. Finally, due to the loss of H atoms, C atoms become more reactive and link together or pile up to form tribopolymer. By understanding these mechanisms, we provide guidance on designing strategies for suppressing tribopolymer formation.